Aim Data Acquisition Systems | Racing Laptimers, Dataloggers, Cameras

AiM

Race Data Acquisition for Every Level and Budget from AiM. From Karting to 24 Hours of LeMans and every race in-between, AiM Race Data Acquisition Systems are available for every level and budget. Data is the key to unlocking free speed, so let AiM Data Acquisition maximize your machine and you.

AiM ECU Bridge RS232 / CAN + - Wiring
Last items in stock
The ECU Bridge Makes It Easy To Get Data From Your Car's ECU To Your AiM SmartyCam or AiM dash display (sold separately). With the AiM ECU Bridge With RS232/CAN Wiring, just a few simple wiring connections will get you up and running.
$238.00
AiM Channel Expansion Hub for MXG, MXS, MXL, EVO3, EVO4
Last items in stock
Allows You To Connect Up To Four Analog Sensors (Or A Combination Of Analog Sensors and up to 2 digital sensors) to the CAN data port on your AiM MXL, EVO3, or EVO4 data logger. You can turn a very affordable dash into an incredibly powerful data logger with AiM Channel Expansion Hub For MXL, EVO3, EVO4. 
$288.00
AiM Thermo-Couple Hub for MXL, MXG, EVO3, EVO4
Last items in stock
Can Increase The Analog Channel Capability On Your AiM MXL, EVO3, or EVO4 Data logger without occupying any analog channels!  AiM Thermo-Couple Hub For MXL, EVO3, EVO4 will let you do just that.
$288.00
AiM LCU-One Lambda Controller - CAN Connection
Last items in stock
The LCU-One Lambda Controller uses the proven wideband Bosch LSU 4.9 oxygen sensor to send Lambda values to your AiM MXL, MXG, MXS, MXL2 dash, EVO3 / EVO4 data logger, SoloDL lap timer, or MyChron5 and 4 kart dash.
$419.00
AiM Data Hub 4-Port CAN for AiM MXG, MXS, & Pista
Last items in stock
Extend The Capabilities Of Your AiM Solo DL, MXS, MXG, MXL, Pista / Pro Data Logger without occupying any more channels or running more cables to your dash. AiM 4-Port CAN Data Hub connects up to four CAN peripherals to each Data Hub. 
$77.00
AiM LCU-One Lambda Controller With CAN/Analog Connection
Last items in stock
AiM LCU-One's can detect punctual Lambda value from 0.65 to 1.6 in older AiM dashes that use Race Studio 2 software. If you are using RaceStudio 3 for your MXM, Solo 2 DL, MXS, MXP, MXG, MXL2 you will need to use the CAN Connection LCU-1.
$439.00
AiM MXL2 Dash
Last items in stock
The AiM MXL2 Is A Powerful And Flexible Racing Data Acquisition System That Is Just As easy to set up and use as all other AiM systems. The MXL2 offers many improvements and enhancements over the original MXL dash system.
$2,299.00
AiM Suction Cup Mount for AiM Solo 2, Solo 2 DL and Old Solos
In Stock
This Suction Cup Mount Kit By AiM Solo Allows Your AiM Solo & Solo DL to mount to your windshield securely and quickly, with perfect viewing every time. If you jump every rumble strip, on purpose or not, our AiM Solo Suction Cup Mount Kit will keep your AiM Solo from moving.
$44.99
AiM Roll Bar Mount for AiM Solo, Solo 2, Solo DL and Solo 2 DL
In Stock
Secure Your AiM Solo or Solo DL Positively To Your Race Car Or Race Bike with the AiM Solo Roll Bar Mount Kit. Rock solid mounting- will not shake or vibrate. Complete kit includes roll-bar bracket, 90 mm arm, clamp base with ball, locknut, 4.5 cm and 5.5 cm tube clamp.
$44.99
AiM Suction Cup Mount for SmartyCam GP HD Bullet Camera
In Stock
AiM Suction Cup Mount for SmartyCam HD GP Bullet Camera. Secure your SmartyCam GP positively to your racecar or race bike. Rock solid mounting will not shake or vibrate. Complete kit includes suction cup, 60 mm arm, ball head, and special AiM SmartyCam billet bullet-cam bracket.
$65.99
AiM Solo Replacement Mount Bracket (Old Solo & Solo DL)
In Stock
Use This AiM Solo / Solo DL Replacement Mount Plate Kit To Mount Your AiM Solo into different vehicles easily. The AiM Solo Replacement Mount Plate includes all hardware and is a Genuine AiM Product.
$15.00
AiM 12V Power Cord for Solo Cig Lighter For Old Solo
Last items in stock
Power Your AiM Solo With This 12V Power Cable Using Your Car Cigarette Lighter. Easy to install by threading into your 3-pin bottom port on your AiM Solo so provide endless power throughout your longest races and weekends. 
$39.99
AiM Auto Oil/Coolant Temp Sensor 1/8 NPT
Last items in stock
AiM 1/8 NPT Automotive Oil/Coolant Temperature Sensor for Measuring 0° to 150° C (32° to 302° F) for AiM MXS, MXG, MXL Pro, MyChron automotive and EVO series automotive applications
$69.00
AiM Auto Oil/Coolant Temp Sensor 10mm
In Stock
AiM 10mm Automotive Oil/Coolant Temperature Sensor for Measuring 0° to 150° C (32° to 302° F) for AiM MyChron, MXL, and EVO series automotive applications with a 10mm Threaded Sensor
$69.00
AiM Auto Oil/Coolant Temp Sensor 5mm
Last items in stock
AiM 5mm Automotive Oil/Coolant Temperature Sensor for Measuring 0° to 150° C (32° to 302° F) for AiM MyChron, MXL, and EVO series automotive applications with a  5mm Threaded Sensor
$69.00
AiM SmartyCam HD Rev. 2.1 Video Camera With Video Overlay
In Stock
SmartyCam HD Rev.2.1 By AiM Changes Racecar Video Forever. AiM started with the game changing SmartyCam original (grey unit). When the SmartyCam grew again to the HD (black box) the already loved features remained and even a few more were added. Now we present the SmartyCam HD Rev.2. The culmination of every video camera AiM has produced. Other cameras systems sorry....Check and Mate
AiM Solo DL CAN/RS232 Wiring Harness (Old Solo DL)
Last items in stock
Moving your original AiM Solo DL from one car to another and need another harness for only power or both power and data input, this is your cable. If you are putting a Solo DL into an older vehicle and need a power supply cable, use this and use only the + and - wires and fold back the can inputs. 
$52.00
SmartyCam GP HD 2.2 to AiM Dash Connection Cable
In Stock
AiM SmartyCam GP HD 2.2 and SmartyCam HD Version 1 (Black Box Camera) replacement connection cable to connect to your Solo DL, MXS, MXG, MXP, MXL2, AiM Data Logger or SMC Bridge. This is a connection cable that has a 712 5 pin male connector on one end and another 712 5 pin male connector on the other end. 
$49.99
AiM 719 to 712 Adapter Cable 2 Meter
Last items in stock
AiM 719 to 4 Pin Adapter Cables Have a Female 4-pin 719 connector at one end and a male 4-pin 712 connector at the other to connect most analog automotive sensors to the MyChron3 XG-Log Auto Dash or AiM EVO4 Data Logger. 
$50.00
AiM 719 to 719 Patch Cable 2 Meter
In Stock
AiM 719 to 719 extension cables have a female 4-pin 719 connector at one end and a male 4-pin 719 connector at the other to connect most analog automotive sensors to AiM Auto Dashes. This is a Male to Female extension cable and can be connected to other 719-719 cables to extend the length from dash to sensor. If you have a screw on connector, look at the AiM 712 Cables.
$30.00
AiM 719 to 719 Patch Cable 1.5 Meter
In Stock
AiM 719 to 719 Extension Cables Have a Female 4-pin 719 Connector at one end and a male 4-pin 719 connector at the other to connect most analog automotive sensors to AiM Auto Dashes. This is a Male to Female extension cable and can be connected to other 719-719 cables to extend the length from dash to sensor. If you have a screw on connector, look at the AiM 712 Cables.
$30.00
AiM 719 to 719 Patch Cable 1 Meter
Last items in stock
AiM 719 to 719 Extension Cables Have a Female 4-pin 719 Connector at one end and a male 4-pin 719 connector at the other to connect most analog automotive sensors to AiM Auto Dashes. This is a Male to Female extension cable and can be connected to other 719-719 cables to extend the length from dash to sensor. If you have a screw on connector, look at the AiM 712 Cables.
$30.00
AiM 719 to 719 Patch Cable 3 Meter
Last items in stock
AiM 719 to 719 Extension Cables Have a Female 4-pin 719 Connector at one end and a male 4-pin 719 connector at the other to connect most analog automotive sensors to AiM Auto Dashes. This is a Male to Female extension cable and can be connected to other 719-719 cables to extend the length from dash to sensor. If you have a screw on connector, look at the AiM 712 Cables.
$30.00
AiM 719 to 719 Patch Cable 4 Meter
In Stock
AiM 719 to 719 Extension Cables Have a Female 4-pin 719 Connector at one end and a male 4-pin 719 connector at the other to connect most analog automotive sensors to AiM Auto Dashes. This is a Male to Female extension cable and can be connected to other 719-719 cables to extend the length from dash to sensor. If you have a screw on connector, look at the AiM 712 Cables.
$30.00
AiM Solo DL to OBD-II Connector (Old Solo DL)
In Stock
AiM SoloDL to OBD-II Port Connection Cable On Your Car For Easy Addition of RPM and other vehicle data. One end has the K-Line (OBD-2) plug to fit the diagnostic port, and the other end has a 7-pin 712 (screw-in) connector for the SoloDL. OBD-II is also known as K-Line.
$52.00
AiM Steering Angle Sensor, Belt Type (Auto)
Last items in stock
AiM's Belt Type (Auto) Steering Angle Sensor Kit Gives You The Data You Need. Did the driver react to a slide, or did he cause the car to understeer? Measure and log driver steering input with the AiM Steering Angle Sensor. Includes a rotary potentiometer with a male 4-pin 719 connector, 2 toothed pulleys, 1 toothed belt, and 1 sensor mounting bracket.
$139.00
AiM Pressure Sensor 0-50 psi 1/8 NPT
In Stock
AiM 1/8 NPT Automotive Oil Pressure Sensor for Measuring 0 to 50psi forAiM MyChron, MXL, EVO3, and EVO4 automotive applications. 1/8 NPT male threads direct into the block.
$139.00
AiM Pressure Sensor 0-15 psi 1/8 NPT
Last items in stock
AiM 1/8 NPT 0-15 psi Pressure Sensor is Ideal For Coolant Pressure or low boost sensing measuring. When installed in the coolant system, you can sense a reduced coolant system pressure (leak) before your coolant is exhausted and engine is overheated.
$139.00
AiM Roll Bar Base Mount Kit
Last items in stock
Use This Base if You Are Moving Your AiM SmartyCam or AiM Solo from car to car. Mount and leave one of these on each of your roll bars and just move your camera and center link to you other vehicles. Too easy. 
$20.00
AiM Magnetic Wheel Speed Sensor - 719 Lead
Last items in stock
AKA The "Bike" Speed Sensor. Aim Magnetic Wheel Speed Sensor is designed to be mounted to the spindle or hub carrier. The trigger magnet (included) mounts to the wheel, wheel hub, or brake rotor to pass in front of the sensor as the wheel rotates.
$85.00
AiM Rotary Throttle Position Sensor
Last items in stock
The AiM Throttle Position Sensor Measures Up To Approximately 25mm ( 1 inch) of Linear Travel. Also known as the "String Pot" throttle position sensor, it connects to your throttle pedal or linkage with a string or thread. As you press the pedal, the string pulls on the rotary arm of the sensor.
$135.00
AiM Remote Button Interface - MXL2, MXG, MXS, MXM
Last items in stock
Can't reach the system buttons on your MXL2, MXG or MXS? The AiM Remote Button Interface offers you 6 contacts to eleminate the need for you to reach the push-buttons on your AiM MXL2, MXG and MSX. Now you can remotly access your four systems buttons, while the fifth is backlight control and the sixth for resetting the second (current stint) odometer. 
$100.00
AiM ECU Bridge Porsche GT3 Cup 996 & 997
Last items in stock
AiM SmartyCam ECU Bridge for Porsche GT3 Cup Cars. Simple plug and play connection has never been easier, so you can have all of your engine data sent to your AiM SmartyCam for true engine data on your video. AiM Porsche GT3 Cup ECU Bridge is the easiest upgrade you will ever do to your GT3 Cup.
$450.00
AiM Roll Bar Mount For SmartyCam GP HD Processor Unit
In Stock
AiM Roll Bar Mount for your SmartyCam HD GP Processor unit. Secure Your SmartyCam GP processor box (the one with the screen) positively to your RaceCar Or Race Bike. Rock solid mounting will not shake or vibrate.  
$73.00
AiM Solo Wiring Harness (Old Solo)
Last items in stock
Now you can power your AiM Solo (original non-DL)  for your entire endurance race without the need to charge the battery. The power cable that comes with the AiM Solo in the package is set up for a cigarette lighter connection, but this is a hard wire connection for true race cars
$52.00
AiM OBD-2 to MXL2, MXS & MXG Dash Cable
Last items in stock
AiM cable for connecting an AiM dash like the AiM MXS, MXG, MXL Pro, and Evo 4. This is a special cable that takes your OBD-2 (K-Line) car connector and conects to the next generation AiM dashes via the Deutsch DTM Connector.
$99.99
AiM Solo BMW S1000RR Triple Clamp Bracket
In Stock
Secure Your AiM Solo or Solo DL positivly To Your BMWS1000RR with the Aim Solo triple clamp kit. Rock solid mounting- will not shake or vibrate. Complete kit includes Triple clamp bracket, 90 mm arm and solo base.
$30.00
AiM MXL to MXG, MXS, MXL2 Adapter Harness
Last items in stock
For use when you upgrade from an AiM MXL Pista or Strada to the modern MXS, MXG, MXP or MXL2 dash. You could remove the MXL harness from the chassis and replace it with the supplied harness that comes with the MXS, MXG or MXL2 or use this adapter harness to make installation easy.
$470.00
AiM 5 Pin 712 -712 CAN / GPS Extension Cable
Last items in stock
AiM GPS & CAN extension cable with the 5 pin male going to a 5 pin female connector. The 712 5 pin has 5 pins and a chrome threaded barrel (screw-in) connection. These extension cables are used to lengthen the CAN & GPS cable to provide a perfect installation.
AiM Solo DL Yamaha 2004-2008 R1, 2006-2013 R6 Mount Bracket
Last items in stock
Secure Your AiM Solo DL or AiM Solo positively To Your Yamaha 2004-2008 R1 motorcycle. Rock solid mounting- will not shake or vibrate. This AiM complete kit includes everything for a simple, secure mount thatt will not loosen during the longest of races.
$35.00
AiM Solo DL Yamaha R1 & R6 Wiring Harness
In Stock
Easily connect your AiM Solo DL To Your Yamaha 2004-2008 R1 or 2006-2016 R6 motorcycle. If everything in racing was this easy, you would be bored. Just place this AiM Yamaha R1 / R6 adapter cable at the factory connection and thread the silver 712 AiM connector to your AiM Solo DL and you are "Ready to Race".
$73.00
AiM 719 4 Pin Male Connector
In Stock
AiM 4 Pin 719 Male Connector to replace or add to your AiM Data system. AiM 719 fittings are the most commonly used temperature and pressure sensor connector fittings, linear & string potentiometers and AiM extension cables. 
$10.00