Helmet Shields And Parts For Auto and Kart Racing Helmets

Helmet Shields & Parts

Tear-off posts, pivot kits, aero kits, forced-air components, and shields in different tints for every race condition to keep you in front of the pack. Genuine Helmet Shields, accessories and parts for Arai, Bell, G-Force, OMP, Roux, Schuberth, Sparco, Simpson, Stilo, and DiscoveryParts Auto Racing Helmets.

Stilo Helmet Wiring Kit For All Stilo GT Helmets
In Stock
Upgrade your Stilo ST5 or Stilo ST4 to integrated radio electronics. Now connect your Stilo helmet to an IMSA, NASCAR, Chatterboc, Trac-Com, or RaceCeiver system. The Stilo Helmet Intercom Wiring Kit With Earmuffs allows you to fit the Superior Stilo Electronics into any Stilo Open Or Stilo Full Face Helmet like the Stilo ST5, ST4F and ST4W Series Helmets
$135.00
Simpson 882 Replacement Shield - Fits Voyager Models
882 Series Replacement Helmet Shields From Simpson fit the popular Simpson Voyager, Super Voyager and Sidewinder Voyager series helmets. Constructed from crystal clear Lexan, these helmet shields will give you "like new" vision for your Simpson helmet. They're available in your choice of clear, light smoke, smoke, iridium, and high-resolution amber finishes.
Schuberth SP1 Wiring Kit - Earcups w/ Boom Mic
Upgrade your Schuberth SP1 helmet with integrated speaker kits. Schuberth integrated speaker kits are designed to isolate ambient noise more effectively than earbud-style speakers, reducing driver fatigue and adding to driver comfort. This wiring kit includes noise-reducing earcups, a boom-style microphone, and an IMSA connector. 
DiscoveryParts SA2015 Clear Shield
Last items in stock
The DiscoveryParts Sportsman Clear Shield Fits SA2015 the DiscoveryParts Carbon & Performer Series Helmets and many others. This is a direct replacement for all DiscoveryParts SA2015 full face helmets, RaceQuip and Pyrotect SA2015 full face helmets, and of course includes tear-off posts.
$39.95
Stilo Hydration Female Quick Coupling
Last items in stock
The Stilo hydration female quick disconnect coupling is part of the Stilo Hydration Integration kit and includes a built in dry-break to ensure no liquids get spilled or wasted during a driver change. This is the replacement female quick disconnect fitting that is part of the complete Stilo Hyrdation Kit and is an excellent spare item.
$10.50
Stilo ST5 Helmet Visor Clear No Anti-Fog Treatment
In Stock
Stilo YA0851 is a special visor for Dirt and Off-Road racers. What makes the Stilo Clear visor without the Anti-Fog treament special is you can now use Plexus or any other premium plastic polish as the shield was never treated with the special Stilo Anti-Fog treatment on the inside. 
$139.00
Stilo Pivot Kit WRC DES & Trophy Helmets
Last items in stock
Want to add a half height visor for your Stilo WRC DES or Trophy? This Stilo Helmet Screw Kit contains all the pieces you need to correctly attach a short, half height visor to your Stilo WRC DES or Trophy helmet. Let DiscoveryParts bring back that Stilo Race Helmet vision to new again.
Molecule Helmet Cleaner & Polish 4oz
In Stock
Keep Your Helmets and Visors Clean and Shiny Over Long Racing Weekends with Molecule Labs Helmet Cleaner & Polish. This spray is designed to clean, shine, and protect. Safe to use on all finishes including flat and matte.
$6.95
Arai GP-5W, CK-6 Tear Offs
In Stock
 Arai Tear-Offs For The GP-5W and SK-5 Line of Helmets Offer a Thick (10 mil.) Protective Layer. Protect your Arai Helmet shield from rocks, dirt, and debris with these 10mm thick tearoffs. Extends the life of your shield by drastically reducing pitting and scratches. 
$10.25
Cool-X Hose Assembly for CoolShirt and F.A.S.T Fits Roux R-1 Helmets
Last items in stock
How does the Roux Helmet Cooling Work? Great question that is answered with both a simple and complex answer. Starting at the helmet, Roux uses a one-piece block that connects to the two dry-break fittings located on the right side of your Roux R-1 Composite and Carbon helmets. The fiberglass helmets do not have the Cool-X option.
$299.00
Bell Shield Hex Wrench Key
In Stock
The 2 Sided Bell Shield Hex Wrench Key has 2 Different Sizes for easy removal of your helmet shield.
$14.95
Bell SRV-8 Clear Shield - Fits Bell M.8/M.8 Carbon
Last items in stock
The Bell SRV-8 Clear Shield Fits the Bell SA2020 M.8, SA2020 M.8 Carbon, SA2015 M.8 and SA2015 Bell M.8 Carbon Helmets. Manufactured from 3mm injection molded polycarbonate to be optically correct and scratch resistant. 
$69.95
Stilo ST5 Short Visor
Stilo ST5 short visors fit all Stilo ST5 SA2015 and FIA 8858/8859/8860 helmets. The new, lower height ST5 Stilo visors are available in 4 different colors to make sure you have the perfect shield for every race condition. Stilo ST5 short visors are a great way to ensure your best vision and lowest lap time.
Bell 281 Anti-Fog insert - Fits Bell BR.1, M-4, Sport
Last items in stock
The 281 Anti-Fog Shield Insert By Bell Converts Your Bell Shield into the highest performing Anti Fog, UV blocking visor. The 20-mil polycarbonate insert has anti-fog coating technology that prevents fogging and absorbs over 98% of UV rays.
$49.95
Stilo ST5 & ST4 Indy Aero Kit
In Stock
For ultra hi-speed open cockpit racers, the Stilo Indy Aero Kit reduces helmet buffeting with ground speeds over 200mph. The Stilo Indy kit has proven itself at the Brickyard and is our aero upgrade for our over 200mph crowd. The Stilo Indy Kit Stabilizes Your Helmet and stops buffeting and lifting at high speeds.
$99.00
Stilo Comfort Noise Reduction Ear Pillows
In Stock
For all Stilo Helmets, The Stilo Comfort Noise Reduction Ear Pillows are the perfect replacement for the noise attenuating earmuffs when the driver wants to hear more cockpit and sounds. The Stilo noise attenuating earmuffs do an excellent job of reducing driver noise levels by perfectly sealing the drivers ear, sometimes you want a little more auditory feedback.
$30.00
Stilo Hydration Male Quick Coupling
Last items in stock
The Stilo hydration male quick disconnect coupling is part of the Stilo Hydration Integration kit and includes a built in dry-break to ensure no liquids get spilled or wasted during a driver change. This is the replacement male quick disconnect fitting that is part of the complete Stilo Hyrdation Kit and is an excellent spare item.
$9.95
Stilo ST5 Helmet Visor - Yellow Double Glazed
In Stock
The Stilo YA0815 ST5 Helmet Visor - Clear Double Glazed is a yellow-tinted replacement for the visor that came on your Stilo ST5- for enhanced anti-fog capabilities. Stilo ST5 visors fit all Stilo SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 10 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. 
$179.00
Bell 281 SRV 3mm Blue Chrome Shield - Fits Bell BR.1, Bell Sport
Last items in stock
The Bell 281 SRV Blue Chrome Shield Fits SA2015, SA2010 and even some SA2005 Helmets, Fits SA2015 Bell Sport, BR.1, SA2010 Bell Sport, M.4, BR.1 and many more. Restore perfect vision to the most important piece of safety equipment you own, your Bell Helmet.
$89.95
DiscoveryParts SA2015 Dark Smoke Shield
Last items in stock
The DiscoveryParts Sportsman Dark Smoke Shield Fits SA2015 the DiscoveryParts Carbon & Performer Series Helmets and many others. This is a direct replacement for the DiscoveryParts SA2015 full face helmets, RaceQuip and Pyrotect SA2015 full face helmets, and of course includes tear-off posts.
$39.95
Arai GP-6S Dual Pane Clear Shield
Last items in stock
Your Arai GP-6S, GP-6PED, SK-6, and GP-6RC shipped to you with a hand made standard clear shield, but on bad weather days a dual pane clear shield is your best friend. You know how well your Arai helmet was crafted when it was built and the same care and exacting standards are used in your new standard Arai GP-6 series shields. 
$129.85
Bell Detent to SRV Pivot Conversion Kit
In Stock
The Bell Detent-to-SRV Pivot conversion kit allows the installation of the current SRV-style Bell Shield to previous generation Detent-style helmets, usually SA2005 and some early SA2010 full face helmets.
$29.95
Stilo Mic Positioning Ring
In Stock
Replace The Stilo Microphone Positioning Ring That Comes With Your Helmet, or use to move the mic even closer to your mouth. Attaches via high quality velcro.
$1.00
Stilo ST5 ABP Visor FIA8860-2018ABP Clear
Last items in stock
Stilo ST5 ABP Visors are special and are designed for Stilo ST5 FIA8860-2018ABP rated helmets. The special Stilo ST5 ABP visor is a special, shorter height visor, and fits all Stilo FIA 8860-2018ABP helmets
$139.00
Stilo HANS FIA Posts Black
In Stock
Stilo's FIA Approved HANS Posts In Black Anodized Billet Metal With Laser Engraving Complete Every Stilo build. These are the Stilo FIA Internationally Approved Hans Posts. 
$65.00
Stilo ST5 Top Ram Air Vent Kit
Last items in stock
Force Cool Air Into Your Helmet With The Stilo ST5 Top Ram Air Vent Kit . Every formula car, open wheel and kart racer puts this hi-impact ABS clear ram air vent on. Does it work? Just jump out of the draft and feel the rush of cool air as you make that offline last corner pass. 
$49.00
Roux Helmet Liquid Cooling Adapter
Your Roux Composite and Carbon helmets came with one of the best driver cooling systems we have ever used. By using recirculating CoolShirt water from your CoolShirt cooler we get that perfect temperature 52° water flowing through the built in Roux Cool-X system to keep heat stress low and you focused on your race.
$99.00
Arai GP-6S Mirror Shield Silver
Last items in stock
Arai GP-6S, GP-6PED, SK-6, and GP-6RC have turned laps at every significant race track in the world. What is the most popular gradient shield for your Arai GP-6S series helmet? Easy answer, the Mirror Visor Panel Arai shields. The "Visor Panel" of the mirror shield is the black tint strip at the top of the visor that serves two purposes.
$150.15
Bell SRV-8 Amber Shield - Fits Bell M.8/M.8 Carbon
Last items in stock
The Bell SRV-8 Amber Shield Fits the Bell SA2020 M.8, SA2020 M.8 Carbon, 2015 M.8 and SA2015 Bell M.8 Carbon Helmets. Manufactured from 3mm injection molded polycarbonate to be optically correct and scratch resistant. 
$69.95
Stilo Side Air Adapter Kit
Last items in stock
Easily Add Forced Air Into Your Stilo ST4 and Stilo ST5 series helmets with the Stilo side air adapter kit.  This lightweight aluminum adapter installs on your Stilo side port and lets you connect our 135cfm CoolShirt helmet air blower system or 235cfm CoolShirt helmet air blower system to your Stilo side air adapter hose kit.
$40.00
Chatterbox to IMSA Helmet Adapter 12" Short
Last items in stock
The Chatterbox to IMSA Headset Adapter lets you use your IMSA male connection from your helmet cord or the male connection on your Roux helmet and easily adapt it to the new Chatterbox Tandem 2. This adapter connects your IMSA male helmet to your new style Chatterbox.
$52.00
Stilo Pivot Kit ST5 Shield Only Red
In Stock
Stilo ST5 replacement shield pivot kit for all Stilo ST5 helmets in red. This is the same pivot kit that came standard on all Stilo ST5 Composite, Offshore, Carbon, 8860 and 8860 Zero helmets but with deep red anodizing
$42.00
Stilo ST5 Helmet Visor - Clear Double Glazed
In Stock
The Stilo YA0814 ST5 Helmet Visor - Clear Double Glazed is a non-tinted replacement for the visor that came on your Stilo ST5- for enhanced anti-fog capabilities. Stilo ST5 visors fit all Stilo SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 10 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. 
$179.00
Roux Light Smoke Shield, Fits Roux R-1 Helmets
Roux light smoke helmet shields are the perfect addition for your Roux R-1 helmet that cover just enough sun when needed. The light smoke helmet shield offers a mid tint (approx 50%) from the driver's view and is a great shield for any endurance or late afternoon racer. You will find that Genuine Roux shields are precision formed and optically correct to suit your needs.

$84.00
Stilo Hydration Integration
In Stock
Hydration Upgrade For Stilo ST5 and ST4 helmets that can be installed on either the left or right side of your Stilo helmet and comes with a quick disconnect fitting, hose, and bite valve.
$40.00
Arai GP-6S Shield Light Tint
Last items in stock
Your Arai GP-6S, GP-6PED, SK-6, and GP-6RC shipped to you with a hand made standard clear shield, but on sunny days a darker gradient is your best friend. You know how well your Arai helmet was crafted when it was built and the same care and exacting standards are used in your new standard Arai GP-6 series shields. 
$99.95
-$19.05
Stilo Helmet & HANS Bag
In Stock
Need to carry and store your Stilo ST5 carbon helmet? Stilo's tri-color helmet and hans bag with that classic Stilo logo fits the bill. A sturdy double tab zipper allows access to a roomy, lined interior compartment built to protect your helmet and your hans device. An expansion zipper opens to add an additional 2 1/2 inches of height to accommodate helmets featuring a top air adapter. 
$99.95
$119.00
DiscoveryParts SA2015 Amber Shield
Last items in stock
The DiscoveryParts Amber Shield Fits SA2015 the DiscoveryParts Carbon & PerformerSeries Helmets and many others. This is a direct replacement for the DiscoveryParts SA2015 full face helmets, RaceQuip and Pyrotect SA2015 full face helmets, and of course includes tear-off posts.
$39.95
Arai GP-6S Anti-Fog Shield Light Tint
Last items in stock
Your Arai GP-6S, GP-6PED, SK-6, and GP-6RC is designed by true artisan workers, but shield fogging may be an issue on the coldest of mornings. Arai makes a special Anti-Fog coated visor to give you the best vision possible on the coldest and wettest track days you may ever drive.
$130.95