AiM MyChron Replacement Sensors

Sensors & Accy

AiM uses several different connector styles for the MyChron patch and sensor cables. Replacement sensors and accessories for your MyChron Kart Display keep you in front of your competition and allow you to use your proven data to get even faster. 

AiM Data Hub 4-Port CAN for AiM MXG, MXS, & Pista
Last items in stock
Extend The Capabilities Of Your AiM Solo DL, MXS, MXG, MXL, Pista / Pro Data Logger without occupying any more channels or running more cables to your dash. AiM 4-Port CAN Data Hub connects up to four CAN peripherals to each Data Hub. 
$59.00
AiM MyChron Kart Four Port Expansion Module
In Stock
A complete, value-for-money instrument for professional kart analysis. MyChron Expansion is the new channel multiplier improving MyChron5, MyChron5 2T, MyChron4, and MyChron4 2T performances, thanks to four additional channels and a further connector for the CAN bus.
$249.00
AiM MyChron Rotax Coolant Temperature Sensor Kit M10
In Stock
This thermoresistive Water Temperature sensor is for use with AiM MyChron3, MyChron4 and MyChron 5 and 2T versions of kart dashes. The sensor has M10 male threads for easy installation in Rotax engines. The sensor lead has a 719 push-on connector, and includes a 1.5 meter adapter cable to connect to your MyChron dash.
$79.95
AiM Inline Water Coupler with 10mm Port
In Stock
This aluminum coupler makes it easy to install an AiM temperature sensor in a 3/4" ID rubber coolant hose. Accepts a standard AiM Fluid Temperature Sensor with 10mm threads (Part No. MC-040), sold separately). Includes hose clamps..
$27.49
AiM MyChron 14mm CHT Sensor Under Spark Plug
Last items in stock
AiM CHT (Cylinder Head Temperature) Sensor Kit that fits under a 14mm spark plug and has a 719 thread on connector to go to your AiM Mychron. Install this AiM Mychron 14mm Under Plug CHT sensor under the spark plug of most air cooled engines like the LO-206, Yamaha KT100 and most every Honda out there. This is the exact replacment sensor sent with all Aim MyChron Kits.
$44.99
AiM MyChron EGT Bung - Weld In
In Stock
Weld-in EGT Bung for all AiM MyChron Kart Dashs. The AiM EGT weld-in bung is an easy way to gather EGT temperatures by simply welding it into your exhaust and threading an AiM EGT Sensor into it. We have found the bung should be mounted 150mm (5.90") from the exhaust port to most accurately measure temperatures ranging from 0 to 1832° F (up to 1000°C). 
$4.95
AiM MyChron EGT Thermocouple Sensor
In Stock
AiM EGT Sensor with a K-Type (two blade flat yellow) connector. Install this AiM Mychron 3/4/5 EGT Thermocouple 150mm (5.90") from the exhaust port to accurately measure temperatures ranging from 0 to 1832° F (up to 1000°C).  This is the exact replacment sensor sent with all Aim MyChron Kits.
$44.99
AiM MyChron EGT Thermocouple Sensor - ICC Pipe (KZ / KF Homologated)
Last items in stock
AiM EGT Sensor designed for KZ & KF homoligated exhaust pipes. Easily connects with any K-Type (two blade flat yellow) connector and threads onto your KZ or KF homologated exhaust pipes sach as IAME, ROK, DeBei, TM and many others. Install this AiM Mychron 3/4/5 EGT Thermocouple into the exhaust port to accurately measure temperatures ranging from 0 to 1832° F (up to 1000°C).  
$44.99
MyChron Kart Accelerator/Brake Pedal Position Sensor Kit
Last items in stock
This sensor uses a magnet to send kart throttle or brake position data to your MyChron5 or MyChron 4 kart data logger. Easy to connect and program the AiM MyChron Kart pedal Position sensor can give accurate data analysis of brake lock-up, and throttle position VS RPM & Lateral and Longitudinal G's. This is one of AiM's best kart sensors.  
$118.99
AiM MyChron 5/4 RPM Tach Lead with Plastic Clip
In Stock
AiM replacement RPM wire with plastic clip to mount to your kart spark plug wire and AiM Mychron 5S, 5 or 4 (all versions) kart dash. Measuring 65" long, you simply snap the plastic lead around your spark plug wire and loop the other insulated wire end through your AiM MyChron 5/4 display. This item usually lasts many years unless it has been damaged by dragging on the ground or accidentally cut.
$11.99
AiM MyChron 5/4/3 Thermocouple Patch Cable
In Stock
AiM MyChron Thermocouple Patch Cable, part number AiM V03CCB15M has a 3 Pin 712 (thread-on) male connector with a K-Type (two blade flat yellow) female connector on the other end. This patch cable is used to connect the AiM Mychron 3/4/5 dash to your AiM thermocouple K-Type connector.
$34.99
AiM MyChron 12mm CHT Sensor Under Spark Plug
Last items in stock
AiM CHT (Cylinder Head Temperature) Sensor Kit that fits under a 12mm spark plug and has a 712 thread on connector to go to your AiM Mychron. Install this AiM Mychron 12mm Under Plug CHT sensor under the spark plug of many air cooled engines.
$44.99
AiM MyChron EGT Sensor w/ Patch Cable - 2 Piece
AiM EGT Sensor Kit with 719 connector. Install this AiM Mychron 4EGT Thermocouple 150mm (5.90") from the exhaust port to accurately measure temperatures ranging from 0 to 1832° F (up to 1000°C).  This is the exact replacement sensor sent with all Aim MyChron Kits.
$79.99
AiM MyChron4 E-Box Gold Expansion Box
This External MyChron4 E-Box Expansion Module Allows You To Further Expand The already awesome potential of your MyChron4 Data Acquisition unit. 
$549.00
AiM MyChron4 Kart Data Download Key
AiM's Download Key Is Very Useful To Store Data Sampled By MyChron4 AndTo download them on a PC for analysis through the powerful  Race Studio 2 software. AiM MyChron4 Kart Data Download Key is a must-have. 
$99.00
AiM MyChron 14mm CHT Sensor Under Spark Plug - K-Type
AiM CHT (Cylinder Head Temperature) Sensor Kit that fits under a 14mm spark plug and has a K-Type connector to go to your AiM Mychron 2T. Install this AiM Mychron 14mm Under Plug CHT sensor under the spark plug of most air cooled engines like the LO-206, Yamaha KT100 and most every Honda out there. This is the exact replacement sensor sent with all Aim MyChron 2T Kits.
$44.99
AiM MyChron Water Thermocouple w/ 5mm Threads
AiM EGT Water THermocouple Sensor with a K-Type (two blade flat yellow) connector and 5mm threads on the sensor. Install this AiM MyChron5, Mychron4, or Mychron3, MyChron 3 Gold Auto and Mychron 3 Plus Water Temperature that has 5mm male threads into any 5mm female port and connect to your K-Type (yellow flat) connector.
$44.99
AiM MyChron Kart Tire Temperature Sensor Kit
This complete AIM Kart Tire Temperature sensor kit covers all 4 tires, easily connects to your MyChron 5 or MyChron 5 2T and is specifically designed to measure the surface temperature of all 4 kart tires, providing important info for chassis tuning, tire exploitation, and driver behavior. 
$499.00
AiM Mychron 3/4/5 Infrared Beacon Receiver
he MyChron Optic Lap Receiver is used with the MyChron Optic Lap Transmitter (Part No. AIM-MC-001) for fast, reliable lap time sampling right to your dash. This unit is the same receiver included with MyChron Kart Dash Kits. The 4-pin 712 (screw-in) connector works with all AiM / MyChron kart dashes from the MyChron3 through to the MyChron5.
$74.99
AiM MyChron 10mm CHT Sensor Under Spark Plug
AiM CHT (Cylinder Head Temperature) Sensor Kit that fits under a 10mm spark plug and has a 712 thread on the connector to go to your AiM Mychron. Install this AiM Mychron 12mm Under Plug CHT sensor under the spark plug of many air-cooled engines.
$38.99