sale
Stilo ST5 Helmet Shields
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo ST5 Helmet Shields from $143.95 $160.00
Stilo Anti-Fog/Anti-Scratch Visor for the ST5 Helmet Stilo ST5 visors fit all Stilo SA2020, SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 10 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. From the Stilo dark smoke to a selection of multiple iridiums, Stilo ST5 visors are a great way to ensure your best vision and lap time. Stilo ST5 GT Visor Part Number Chart: STI-YA0800 ST5 Clear Visor STI-YA0801 ST5 Smoked medium visor STI-YA0802 ST5 Smoked dark visor STI-YA0803 ST5 Mirror medium visor STI-YA0804 ST5 Mirror dark visor STI-YA0805 ST5 Iridium blue medium visor STI-YA0806 ST5 Iridium blue dark visor STI-YA0807.2 ST5 Iridium red medium visor STI-YA0808 ST5 Iridium red dark visor STI-YA0809.2 ST5 Iridium yellow medium visor - Not FIA Certified STI-YA0810 ST5 Iridium yellow dark visor - Not FIA Certified STI-YA0813 ST5 Amber visor - Not FIA Certified STI-YA0814 ST5 Clear double glazed visor - Dirt / Offroad Friendly STI-YA0815 ST5 Clear double glazed visor - Not FIA Certified STI-YA0816 ST5 Sun screen short visor STI-YA0821 ST5 Visor sun strip blocker STI-YA0817 ST5 Visor screw kit STI-YA0818 ST5 Visor locking pin replacement STI-YA0851 ST5 Clear Anti-Scratch No Anti-Fog - Dirt / Offroad Friendly High quality, Anti-fog visors shaped for the Stilo ST5 GT helmets. The Stilo ST5 series is unique in that the shield lock is located in the center position of the shield. The shield lock is released by squeezing the outboard sides together and that will then release it from the mount stud that is located in the center of the helmet. The reason for this is to "clean-up" the sides of the helmet where a side impact in a head containment seat may grab parts of the helmet. All Stilo ST5 shilds have the center release mechanism installed on it.All Stilo ST5 shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a micro fiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single pass works best. Repeat if necessary, but usually one pass works great.Stilo Visor Care: Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. This is the official Stilo Visor Cleaner.
Bell SE07 3mm Helmet Shields (Fits RS7,HP7,KC7)
Bell Bell SE07 3mm Helmet Shields (Fits RS7,HP7,KC7) from $99.95
Bell Racing Helmets SE07 3mm Helmet Shield Bell SE07 helmet shields are specifically designed for the SA2015 Bell RS7 and HP7 helmets. These 3mm injection-molded optically correct polycarbonate face shield with Double Screen Anti-Fog (DSAF) insert for superior fog control. The SE07 shield uses the SV (SE07) pivot kit, is compatible with tear offs, and is available in a variety of tint colors. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) AVAILABLE TINT COLORS: Clear Light Smoke Dark Smoke Yellow Silver Mirror Blue Mirror Rainbow Iridium Mirror Multi-Layer Blue Multi-Layer Red
Bell SRV-8 Helmet Shields (Fits M.8)
Bell Bell SRV-8 Helmet Shields (Fits M.8) from $69.95
Bell SRV-8 Helmet Shields (Fits M.8) The Bell SRV-8 is a 3mm injection-molded, optically correct polycarbonate face shield. The SRV-8 3mm shield uses the SRV-1 pivot kit (not included), is compatible with tear offs, and is available in a variety of tint colors and mirror finishes. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) TINT COLORS: Light Smoke Dark Smoke Amber Silver Mirror Blue Mirror Clear
Stilo Perimeter Seal Tearoff ST5 Thick 4mil
Racing Optics Stilo Perimeter Seal Tearoff ST5 Thick 4mil $46.95
Stilo ST5 Thick 4mil Perimeter Seal Tearoff Pack qty 9 (3 Sleeves of 3) Protect Your Stilo ST5 Helmet Shield from rocks, dirt, and debris with these 4 mil thick tearoffs. Measuring 4 mil thickness (the most popular thickness for open cockpit and harsh environment racers), it is intended for road racing and/or dirt track use. The perimeter seal system used in these tearoffs provides a tighter fit against the visor, blocking out dirt, dust, and water from getting between the visor and tearoff stack. This package of 4 mil tear-offs are in 3 stacks of 3 per package (9 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo 4 mil Perimeter Seal Tearoff Pack Quantity 9 (3 Sleeves of 3) Details: Manufacturer: Stilo Manufacturer part numbers: 3459CP Thickness each: 4 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 3 Stacks of 3 each Note: This is the thicker of tearoffs (4 mil) for your Stilo ST5 series helmets. It is used primarily in Road Racing Open Cockpit or other harsh environment race tracks
Bell SE03 Helmet Shields (Fits GP.3, GTX.3, HP3)
Bell Bell SE03 Helmet Shields (Fits GP.3, GTX.3, HP3) from $99.95
Bell SE03 Helmet Shields (Fits GTX.3, GP.3, HP3) Bell SE03 Double Screen Anti-Fog (DSAF) helmet shields are specifically designed for the SA2015 Bell GP.3 and GTX.3 helmets (including carbon fiber models), and the SA2010 Bell HP3 Carbon Helmet. The Double Screen Anti-Fog treatment features variable thickness that exceeds 5mm in the field of vision for excellent clarity and fog-control. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) TINT COLORS: Clear High-Resolution Amber Light Smoke Dark Smoke Blue Chrome Silver Chrome Gold Chrome Rainbow Mirror Red Metallic Multilayer Red, Blue or Green
Stilo Perimeter Seal Tearoff ST5 Thin 2mil
Racing Optics Stilo Perimeter Seal Tearoff ST5 Thin 2mil $46.95
Stilo ST5 Thin 2mil Perimeter Seal Tearoff Pack qty 30 (3 Sleeves of 10) Protect Your Stilo ST5 Helmet Shield From Rocks, Dirt, and Debris with these 2 mil thick tearoffs. Measuring 2 mil thickness (the most popular thickness for dirt track racers), it is intended for road racing and/or dirt track use. The perimeter seal system used in these tearoffs provides a tighter fit against the visor, blocking out dirt, dust, and water from getting between the visor and tearoff stack. This package of 2 mil tear-offs are in 3 stacks of 10 per package (30 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo ST5 2mm Perimeter Seal Tearoff Pack Quantity 30 (3 Sleeves of 10) Details: Manufacturer: Stilo Manufacturer part numbers:10259CP Thickness each: 2 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 3 Stacks of 10 tear-offs glued together Note: This is the thinner of tearoffs (2 mil) for your Stilo ST5 series helmets. It is used primarily in Dirt Track Racing where you need more pulls in a race
sale
Stilo ST5 Visor FIA8860-2018ABP
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo ST5 Visor FIA8860-2018ABP from $143.95 $160.00
Stilo ST5 Visor FIA8860-2018ABP Smoked Medium THIS VISOR IS ONLY COMPATIBLE WITH STILO ST5 FIA 8860-2018ABP HELMETS.  Previously, the FIA 8860 standards for F1 required a Zylon strip (exceptionally strong, bulletproof material) to be mounted onto the shield to cover a section of the helmet (along the edge of the visor opening of the shell) that was considered, well, slightly less impenetrable by dangerous impacts. Now, for 2019, a new helmet standard has been released - FIA 8860-2018-ABP (Advanced Ballistic Protection) This new standard builds the protection into the helmet shell and therefore eliminates the need for the Zylon strip. (the Zylon strip is still available for use on other Stilo ST5 helmets. It must be purchased in conjunction with the purchase of your new ST5 visor and built by Stilo. This is NOT an after market item that can be installed by the end user) This new standard drove the Stilo engineers to design and develop a new helmet - the Stilo ST5 FIA8860-2018ABP. With this new helmet design came a new shield design. While looking very similar to the standard Stilo ST5 visor, there is a slight shape difference in the height. Stilo ST5 ABP Visors are special and designed for Stilo ST5 FIA8860-2018ABP rated helmets. The Stilo ST5 ABP visor is a special, shorter height visor that fits all Stilo FIA 8860-2018ABP helmets.  Stilo ST5 Visor FIA8860-2018ABP Details: Manufacturer: Stilo Qty in kit: One Visor stocking bag included: Yes Fits Stilo ST5 FIA8860-2018ABP helmets: Yes Fits any other Stilo helmet: No ABP is an Acronym: Advanced Ballistic Protection is the new F1 standard from 2019 forward. The FIA8860-2018ABP rating is an extremely tough standard for protection at extreme speeds. Trust Stilo to keep you as safe as you can be on track.  ABP is Shaped Differently: The Stilo ST5 ABP visors are F1 legal. To design a visor to the strict rules of F1, Stilo went back to the drawing board and perfected what we thought was the perfect visor, the one installed on the ST5. The re-designed FIA8860-2018ABP visor uses the same Stilo pivot kit, mount points, and center locking clasp, but is slightly shorter. By having a visor with a reduced height, strength is improved, weight is reduced, and a lighter and safer helmet is created. Stilo is #1 again.  Stilo ST5 Visor FIA8860-2018ABP Part Number List: YA0800ABP Clear YA0801ABP Smoked medium visor YA0802ABP Smoked dark visor YA0803ABP Mirror medium visor YA0804ABP Mirror dark visor YA0805ABP Iridium blue medium visor YA0806ABP Iridium blue dark visor YA0807ABP Iridium red medium vosor YA0808ABP Iridium red dark visor
Bell 287 SRV Helmet Shields (Fits K1 Pro, K1 Sport, GP.2 Youth)
Bell Bell 287 SRV Helmet Shields (Fits K1 Pro, K1 Sport, GP.2 Youth) from $69.95
Bell 287 SRV Helmet Shields (Fits K1 Pro, K1 Sport, GP.2 Youth) Bell's 3mm injection molded optically correct polycarbonate face shield. The 287 SRV 3mm shield uses the SRV-1 pivot kit, is compatible with tear offs and is available in a variety of colors. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. Select from the following tint colors: Clear Light Smoke Dark Smoke Amber Silver Mirror Blue Mirror Gold Mirror
Stilo Tearoff ST5 Thick 4mil
Racing Optics Stilo Tearoff ST5 Thick 4mil $39.95
Stilo ST5 Thick 4mil Tearoff Pack qty 12(4 Sleeves of 3) Protect Your Stilo ST5 Helmet Shield from rocks, dirt, and debris with these 4 mil thick tearoffs. Measuring 4 mil thickness (the most popular thickness for open cockpit and harsh environment racers), it is intended for road racing and/or dirt track use. This package of 4 mil tear-offs are in 4 stacks of 3 per package (12 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo 4 mil Tearoff Pack Quantity 10 (4 Sleeves of 3) Details: Manufacturer: Stilo Manufacturer part numbers: 3459C Thickness each: 4 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 4 Stacks of 3 each Note: This is the thicker of tearoffs (4 mil) for your Stilo ST5 series helmets. It is used primarily in Road Racing Open Cockpit or other harsh environment race tracks
HJC Helmet Shields
HJC HJC Helmet Shields from $69.99
HJC AR-10 III and HX-10 III Replacement Shields Polycarbonate injection molded construction for superior visibility and durability. Hard coated anti-fog interior. Pre-installed tear off posts. Available in Dark Blue, Chrome, Amber, Dark Smoke, and Clear. Genuine HJC Helmet Shields and Parts bring new life to your HJC auto racing helmet. HJC shields in different tints keep you ahead of the pack in every racing condition.
Stilo Tearoff ST5 Thin 2mil
Racing Optics Stilo Tearoff ST5 Thin 2mil $39.95
Stilo ST5 Thin 2mil Tearoff Pack qty 30 (3 Sleeves of 10) Protect Your Stilo ST5 Helmet Shield From Rocks, Dirt, and Debris with these 2 mil thick tearoffs. Measuring 2 mil thickness (the most popular thickness for dirt track racers), it is intended for road racing and/or dirt track use. This package of 2 mil tear-offs are in 3 stacks of 10 per package (30 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo ST5 2mm Tearoff Pack Quantity 30 (3 Sleeves of 10) Details: Manufacturer: Stilo Manufacturer part numbers:10259C Thickness each: 2 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 3 Stacks of 10 tear-offs glued together Note: This is the thinner of tearoffs (2 mil) for your Stilo ST5 series helmets. It is used primarily in Dirt Track Racing where you need more pulls in a race
Bell SE06 3mm Helmet Shields (Fits HP6, GT6)
Bell Bell SE06 3mm Helmet Shields (Fits HP6, GT6) from $99.95
Bell Racing Helmets SE06 3mm Helmet Shield Bell SE06 helmet shields are specifically designed for the SA2020 Bell HP6 and GT6 helmets. These 3mm injection-molded optically correct polycarbonate face shield with Double Screen Anti-Fog (DSAF) insert for superior fog control. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.)
-36% sale
Stilo ST5 Short Helmet Shields
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo ST5 Short Helmet Shields $132.95 $206.00
Stilo Anti-Fog/Anti-Scratch Short Visor for the ST5 Helmet Stilo ST5 short visors fit all Stilo SA2020, SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 4 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. From the Stilo dark smoke to a selection of multiple iridiums, Stilo ST5 visors are a great way to ensure your best vision and lap time. Stilo ST5 GT Visor Part Number Chart: YA0854 ST5 Mirror dark visor YA0836 ST5 Iridium blue dark visor YA0837.2 ST5 Iridium red dark visor YA0838 ST5 Iridium yellow dark visor - Not FIA Certified High quality, Anti-fog visors shaped for the Stilo ST5 GT helmets. The Stilo ST5 series is unique in that the shield lock is located in the center position of the shield. The shield lock is released by squeezing the outboard sides together and that will then release it from the mount stud that is located in the center of the helmet. The reason for this is to "clean-up" the sides of the helmet where a side impact in a head containment seat may grab parts of the helmet. All Stilo ST5 shilds have the center release mechanism installed on it.All Stilo ST5 shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a micro fiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single pass works best. Repeat if necessary, but usually one pass works great.Stilo Visor Care: Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. This is the official Stilo Visor Cleaner.
Sold out
Racing Optics (X-Stack) - 2mm Laminated Tearoffs X-Stack
Racing Optics Racing Optics (X-Stack) - 2mm Laminated Tearoffs X-Stack $39.95
Racing Optics (X-Stack) 2mm Laminated Tearoffs X-Stack™ 10 (Clear) The XStack™ 10 is a stack of 10 laminated Tearoffs that are 2 mil thick each. The laminated technology creates a distortion-free optical lens. Each package contains 3 stacks of 10 Tearoffs for a total of 30 Tearoffs. Clear. RAO-10206C Fits: Bell: Dominator.3, GTX.3, GP.3, GT.5 Touring, HP.3, HP5 Touring, B2 Apex, B2 Vision, SE03 Shield, SE05 Shield ROP10203C Fits: HJC H10 & AR10-III
Racing Optics (X-Stack) - Bell 287 SRV, SRV-8 and Roux R-1 Helmets
Racing Optics Racing Optics (X-Stack) - Bell 287 SRV, SRV-8 and Roux R-1 Helmets $36.95
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmet Shields Racing Optics has the most optically advanced tearoff technology. 10 layer "distortion free" laminated tearoff system for the Bell 287, SRV-8 and Roux R-1 helmets. Protect your Bell or Roux Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmets Details: Qty in one stack: 10 Thickness: 2 mil Stacks in one package: 3 Post centers: 12 1/8" Shape: Banana Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmets Fitment Guide: Fits Bell: Bell 287 SRV Shields Bell GTX.2 Helmets Bell GP.2 Helmets Bell Star Infusion Helmets Bell Dominator.2 Helmets Bell M.8 Composite SA2015/SA2020 Bell M.8 Carbon SA2015/SA2020 Fits Roux: R-1 Fiberglass R-1 Composite R-1 Gloss Carbon R-1 Matte Carbon Racing Optics is a laminated tear off solution for dirt and pavement forms of racing eliminating the need to apply individual tear offs. Racing Optics has the most optically advanced tearoff technology. 10 layer "distortion free" laminated tearoff system for the Bell 287 SRV and Roux R-1 shields. Protect your Bell and Roux Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. For racers who prefer thinner tear offs, Racing Optics is available in X Stack (10 per stack) 2 mil with patterns specific to Bell Helmets including the GTX.2, GP.2, Star Infusion, Dominator.2, and all Roux R-1 helmets. Each sleeve comes with three stacks of 10 Racing Optics. (total of 30)