Race Car Helmet Blowers, Seat Blowers & Cabin Air Kits & Parts

Air Accessories

Forced air driver cooling for helmets, cockpits, and seat-cooling is easy if you have all the right pieces. If you are building from scratch or upgrading on a previous build, we have all the little hard-to-find pieces in one place to keep you cool and focused. 

CoolShirt 135 CFM Air Blower System
In Stock
Let This Blower System Deliver Relief From The Heat In Your Helmet. CoolShirt's ABS-C 135 CFM provides clean, fresh air to the racer's helmet from the racecar's outside intake. Hot-blooded drivers - this is your system.
$124.00
CoolShirt 235 CFM Air Blower System
In Stock
Let This Blower System Deliver Relief From The Heat In Your Helmet. CoolShirt's ABS-C 235 CFM provides clean, fresh air to the racer's helmet from the racecar's outside intake. Hot blooded drivers - this is your system.
 
$169.00
CoolShirt 4" Filter and Screen
In Stock
Keep dirt out of your forced air helmet with a CoolShirt replacement filter and screen kit for your CoolShirt 4" inlet air blower system. This is the complete filter & screen kit with 1 filters and one metal screen.
$11.00
CoolShirt 3" Filter and Screen
In Stock
Keep Dirt Out Of Your Forced Air Helmet With A CoolShirt Replacement Filter And Screen Kit for your CoolShirt 3" inlet air blower system. This is the complete filter & screen kit with 1 filter and one metal screen.
$8.00
CoolShirt Blower Filter Housing 4" x 3"
In Stock
CoolShirt Blower Filter Housing 5013-0006 has a 4”ID x 3”ID reducer to allow a 4" blower to be used with a 3" duct. A 235cfm blower has a 4" inlet, so this reducer is commonly used to adapt a 3" NACA duct to the supply side. Pretty much an indestructible part, this CoolShirt blower filter housing is used to upgrade or modify an older or smaller helmet blower system.
$29.00
CoolShirt Lightweight Air Hose 1.5" ID x 8'
In Stock
CoolShirt Helmet Air Hose 1 ½” ID x 8’ is used to connect your helmet cooler to your helmet. Measuring 8 feet long with an inside diameter of 1.5", this easily connects your helmet blower or cooler output to your helmet. 
$49.00
Hose End Fitting 1 ½ ID – Cooler to Air Hose
In Stock
This 1.5" Adapter Takes Your CoolShirt Cooler Air Port (1.5") and adapts it to your helmet air hose. Smooth on one end (cooler) and ribbed on the other end for the air hose.
$11.00
CoolShirt Blower Filter Housing 3"x 3"
In Stock
CoolShirt Blower Filter Housing 5013-0005 has a 3”ID x 3”ID reducer to allow a 3" blower to be attached to a 3" duct. A 135cfm blower has a 3" inlet, so this reducer is commonly used to connect a 3" NACA duct to the supply side. Pretty much an indestructible part, this CoolShirt blower filter housing is used to upgrade or modify a helmet blower system.
$30.00
CoolShirt Replacement 135 CFM Fan
Last items in stock
This is the factory replacement fan for CoolShirt's ABS-C 135 CFM Air Blower System to keep delivering clean, fresh air to the racer's helmet from the racecar's outside intake.
$62.00
CoolShirt Replacement Fan/235 CFM
In Stock
This is the factory replacement fan for CoolShirt's ABS-C 235 CFM Air Blower System to keep delivering clean, fresh air to the racer's helmet from the racecar's outside intake.
$73.00
-75%
Closeout CoolShirt Blower Hose End Fitting 1.5" x 1.5" Blue Closeout
In Stock
Coolshirt Hose end Fitting, connects the 1.5" helmet cooling air hose to your cooler. Soft silicone composite makes removing and connecting easy. Lightweight and nearly indestructible, the CoolShirt hose to cooler coupler is ready for years of trouble free service. 
$2.50
$10.00
CoolShirt 4" Filter Kit Qty 10
In Stock
Your CoolShirt helmet blower system uses an ultra-lightweight filter to keep dirt out of your forced air helmet. The CoolShirt 5013-0013 kit includes 10 replacement filters to provide a full season of "clean" racing. Fitting both 3" and 4" CoolShirt blower systems, this is a great track side spares kit.
$15.00
ChillOut Systems Air Plenum, 90º Slimline 100% Carbon Fiber (3-Inch)
Last items in stock
Forcing fresh air to your cooler is the most efficient way to increase cooling performance and reduce amp draw from your electrical system. This plenum fits perfectly to cover the intake side of your Quantum Cooler and allows much cooler air to be forced through the system via a 3 inch duct. A 150 cfm blower (Minimum) should be used in conjunction with the plenum in order to cool properly.
$195.00
ChillOut Systems Air Duct Plenum (3-Inch)
In Stock
Forcing fresh air to your cooler is the most efficient way to increase cooling performance and reduce amp draw from your electrical system. This plenum fits perfectly to cover the intake side of your Quantum Cooler and allows much cooler air to be forced through the system via a 3 inch duct. A 150 cfm blower (Minimum) should be used in conjunction with the plenum in order to cool properly.
$48.00
CoolShirt Blower Hose End Fitting 3" x 1.5"
CoolShirt blower hose end fitting for designing your own race driver air system. Blower Hose End Fitting 3” ID x 1 ½” ID to adapt the 3" blower output to helmet hose. 
$28.00
CoolShirt Blower Hose End Fitting 4" x 1.5"
CoolShirt blower hose end fitting for designing your own race driver air system. Blower Hose End Fitting 4” ID x 1 ½” ID to adapt the 4" blower output to helmet hose. 
$29.00
Coolshirt Dry Cool Air System - Add Air To A Shirt System
Now any racer can add air to their Cool Shirt water system with one of these CoolShirt Dry-Cool Air Systems.The DCAS-235 is an add on component that can be added in series to any water cooled system to provide the option of cool air to the helmet. The days of cool body and hot head are now over.    
$590.00
ChillOut Uber3 3" 250 CFM Blower
This is our favorite blower fan. The 3" diameter works perfectly with most NACA duct setups to accelerate air into your helmet's top- or side-forced air kit, or for ducting cool air over your ChillOut Systems cooler to keep it operating with less strain.
$348.00
ChillOut Systems 4-Inch Carbon Fiber Air Plenum
Forcing fresh air to your cooler is the most efficient way to increase cooling performance and reduce amp draw from your electrical system. This plenum fits perfectly to cover the intake side of your Quantum Cooler and allows much cooler air to be forced through the system via a 4 inch duct. This 4" inlet generally allows enough airflow to eliminate the need for an in-line blower.
$205.00