Carbotech Stop-Tech ST-60 Brake Pads
Carbotech Brakes Carbotech Stop-Tech ST-60 Brake Pads from $167.00
Carbotech Brake Pads How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT1247 Fits: Stop-Tech ST 60 Brake Calipers Hawk Equivelant: HB122_.710 Stop-Tech ST 60 Carbotech Brake Pads are available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. [img-12187-left-large_default] Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-12187-left-large_default]
Carbotech CT609 Race Pads For Stoptech ST-40 and ST-45 Caliper
Carbotech Brakes Carbotech CT609 Race Pads For Stoptech ST-40 and ST-45 Caliper from $184.00
Carbotech CT609 Race Pads For Stoptech ST-40 and ST-45 Caliper Carbotech Race Pads For Stoptech ST-40, ST-50 and many Porsche, Ferrari, and Audi applications in AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT609 Compounds available: AX6, XP8, XP10, XP12, XP20, XP24 and RP2 Most popular track combination: XP10 Front, XP8 Rear Hawk cross reference: HB141._650 Material thickness of pad of backing plate and pad material: .650" Material thickness of pad of backing plate and pad material: 17mm [img-12142-left-large_default] BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CTP609 Brake Pad Fitment: StopTech ST-40 StopTech ST-45 1986 PORSCHE 928 CS ALL (1986, 1986) 1986 PORSCHE 928 GT ALL (1986, 1986) 1986 PORSCHE 928 GTS ALL (1986, 1986) 1986 PORSCHE 928 S ALL (1986, 1986) 1986 PORSCHE 928 S4 ALL (1986, 1986) 1987 PORSCHE 928 CS ALL (1987, 1987) 1987 PORSCHE 928 GT ALL (1987, 1987) 1987 PORSCHE 928 GTS ALL (1987, 1987) 1987 PORSCHE 928 S ALL (1987, 1987) 1987 PORSCHE 928 S4 ALL (1987, 1987) 1988 PORSCHE 928 CS ALL (1988, 1988) 1988 PORSCHE 928 GT ALL (1988, 1988) 1988 PORSCHE 928 GTS ALL (1988, 1988) 1988 PORSCHE 928 S ALL (1988, 1988) 1988 PORSCHE 928 S4 ALL (1988, 1988) 1989 PORSCHE 928 CS ALL (1989, 1989) 1989 PORSCHE 928 GT ALL (1989, 1989) 1989 PORSCHE 928 GTS ALL (1989, 1989) 1989 PORSCHE 928 NO SUBMODEL (1989, 1989) 1989 PORSCHE 928 NO SUBMODEL #N/A (1989) 1989 PORSCHE 928 S ALL (1989, 1989) 1989 PORSCHE 928 S4 ALL (1989, 1989) 1989 PORSCHE 944 TURBO W/KONI SPORT SUSPENSION ALL (1989, 1989) 1990 PORSCHE 911 CARRERA 99335193901 (1990, 1990) 1990 PORSCHE 928 CS ALL (1990, 1990) 1990 PORSCHE 928 GT ALL (1990, 1990) 1990 PORSCHE 928 GTS ALL (1990, 1990) 1990 PORSCHE 928 NO SUBMODEL (1990, 1990) 1990 PORSCHE 928 NO SUBMODEL #N/A (1990) 1990 PORSCHE 928 S ALL (1990, 1990) 1990 PORSCHE 928 S4 ALL (1990, 1990) 1990 PORSCHE 944 92835193904 (1990, 1990) 1990 PORSCHE 944 SPORT SUSPENSION ALL (1990, 1990) 1990 PORSCHE 944 TURBO W/KONI SPORT SUSPENSION ALL (1990, 1990) 1991 PORSCHE 911 96535193902 (1991, 1991) 1991 PORSCHE 911 (964) TURBO ALL (1991) 1991 PORSCHE 911 CARRERA 2 TURBO LOOK ALL (1991, 1991) 1991 PORSCHE 911 CARRERA 2S ALL (1991, 1991) 1991 PORSCHE 911 TURBO 99335193901 (1991, 1991) 1991 PORSCHE 911 TURBO, 964 ALL (1991, 1991) 1991 PORSCHE 928 CS ALL (1991, 1991) 1991 PORSCHE 928 GT ALL (1991, 1991) 1991 PORSCHE 928 GTS ALL (1991, 1991) 1991 PORSCHE 928 NO SUBMODEL (1991, 1991) 1991 PORSCHE 928 NO SUBMODEL #N/A (1991) 1991 PORSCHE 928 S ALL (1991, 1991) 1991 PORSCHE 928 S4 ALL (1991, 1991) 1991 PORSCHE 944 SPORT SUSPENSION ALL (1991, 1991) 1991 PORSCHE 944 TURBO W/KONI SPORT SUSPENSION ALL (1991, 1991) 1992 PORSCHE 911 (964) TURBO ALL (1992) 1992 PORSCHE 911 CARRERA 2 TURBO LOOK ALL (1992, 1992) 1992 PORSCHE 911 CARRERA 2S ALL (1992, 1992) 1992 PORSCHE 911 TURBO 99335193901 (1992, 1992) 1992 PORSCHE 911 TURBO, 964 ALL (1992, 1992) 1992 PORSCHE 968 W/SPORT SUSPENSION ALL (1992, 1992) 1992 PORSCHE 968 SPORT 96535193903 (1992, 1992) 1993 PORSCHE 911 CARRERA 2 TURBO LOOK ALL (1993, 1993) 1993 PORSCHE 911 CARRERA 2S ALL (1993, 1993) 1993 PORSCHE 911 TURBO 99335193901 (1993, 1993) 1993 PORSCHE 928 NO SUBMODEL (1993, 1993) 1993 PORSCHE 928 NO SUBMODEL #N/A (1993) 1993 PORSCHE 968 W/SPORT SUSPENSION ALL (1993, 1993) 1993 PORSCHE 968 SPORT 96535193903 (1993, 1993) 1994 FERRARI 456 GT NO SUBMODEL ALL (1994) 1994 PORSCHE 911 993 BODY; CARRERA 2 (1994, 1994) 1994 PORSCHE 911 993 BODY; CARRERA 2 #N/A (1994) 1994 PORSCHE 911 (993) CARRERA 2 ALL (1994) 1994 PORSCHE 911 CARRERA 2 TURBO LOOK ALL (1994, 1994) 1994 PORSCHE 911 CARRERA 2, 993 ALL (1994, 1994) 1994 PORSCHE 911 CARRERA 2S ALL (1994, 1994) 1994 PORSCHE 911 CARRERA 4 (1994, 1994) 1994 PORSCHE 911 CARRERA 4 99335193901 (1994, 1994) 1994 PORSCHE 928 NO SUBMODEL (1994, 1994) 1994 PORSCHE 928 NO SUBMODEL #N/A (1994) 1994 PORSCHE 968 W/SPORT SUSPENSION ALL (1994, 1994) 1994 PORSCHE 968 SPORT 96535193903 (1994, 1994) 1995 FERRARI 456 GT NO SUBMODEL ALL (1995) 1995 PORSCHE 911 993 BODY (1995, 1995) 1995 PORSCHE 911 993 BODY #N/A (1995) 1995 PORSCHE 911 (993) CARRERA 2 ALL (1995) 1995 PORSCHE 911 (993) CARRERA 4 ALL (1995) 1995 PORSCHE 911 (993) TURBO ALL (1995) 1995 PORSCHE 911 CARRERA 2 99335193901 (1995, 1995) 1995 PORSCHE 911 CARRERA 2, 993 ALL (1995, 1995) 1995 PORSCHE 911 CARRERA 4, 993 ALL (1995, 1995) 1995 PORSCHE 911 TURBO, 993 ALL (1995, 1995) 1995 PORSCHE 928 NO SUBMODEL (1995, 1995) 1995 PORSCHE 928 NO SUBMODEL #N/A (1995) 1995 PORSCHE 968 W/SPORT SUSPENSION ALL (1995, 1995) 1995 PORSCHE 968 SPORT 96535193903 (1995, 1995) 1996 FERRARI 456 GT NO SUBMODEL ALL (1996) 1996 PORSCHE 911 993 BODY; CARRERA 4S (1996, 1996) 1996 PORSCHE 911 993 BODY; CARRERA 4S #N/A (1996) 1996 PORSCHE 911 993 BODY; EXCEPT TURBO AND CARRERA 4S (1996, 1996) 1996 PORSCHE 911 993 BODY; EXCEPT TURBO AND CARRERA 4S #N/A (1996) 1996 PORSCHE 911 993 BODY; TURBO (1996, 1996) 1996 PORSCHE 911 993 BODY; TURBO #N/A (1996) 1996 PORSCHE 911 (993) CARRERA 2 ALL (1996) 1996 PORSCHE 911 (993) CARRERA 2 TURBO LOOK ALL (1996) 1996 PORSCHE 911 (993) CARRERA 2S ALL (1996) 1996 PORSCHE 911 (993) CARRERA 4 ALL (1996) 1996 PORSCHE 911 (993) CARRERA 4 TURBO LOOK ALL (1996) 1996 PORSCHE 911 (993) CARRERA 4S ALL (1996) 1996 PORSCHE 911 (993) TURBO ALL (1996) 1996 PORSCHE 911 CARRERA 2 TURBO LOOK, 993 ALL (1996, 1996) 1996 PORSCHE 911 CARRERA 2, 993 ALL (1996, 1996) 1996 PORSCHE 911 CARRERA 2S, 993 ALL (1996, 1996) 1996 PORSCHE 911 CARRERA 4 TURBO LOOK, 993 ALL (1996, 1996) 1996 PORSCHE 911 CARRERA 4, 993 ALL (1996, 1996) 1996 PORSCHE 911 CARRERA 4S, 993 ALL (1996, 1996) 1996 PORSCHE 911 CARRERA TARGA 99335193901 (1996, 1996) 1996 PORSCHE 911 TURBO 99335193901 (1996, 1996) 1996 PORSCHE 911 TURBO, 993 ALL (1996, 1996) 1997 PORSCHE 911 993 BODY; CARRERA 4S (1997, 1997) 1997 PORSCHE 911 993 BODY; CARRERA 4S #N/A (1997) 1997 PORSCHE 911 993 BODY; EXCEPT TURBO AND CARRERA 4S (1997, 1997) 1997 PORSCHE 911 993 BODY; EXCEPT TURBO AND CARRERA 4S #N/A (1997) 1997 PORSCHE 911 993 BODY; TURBO (1997, 1997) 1997 PORSCHE 911 993 BODY; TURBO #N/A (1997) 1997 PORSCHE 911 (993) CARRERA 2 ALL (1997) 1997 PORSCHE 911 (993) CARRERA 2 TURBO LOOK ALL (1997) 1997 PORSCHE 911 (993) CARRERA 2S ALL (1997) 1997 PORSCHE 911 (993) CARRERA 4 ALL (1997) 1997 PORSCHE 911 (993) CARRERA 4 TURBO LOOK ALL (1997) 1997 PORSCHE 911 (993) CARRERA 4S ALL (1997) 1997 PORSCHE 911 (993) TURBO ALL (1997) 1997 PORSCHE 911 CARRERA 2 99335193901 (1997, 1997) 1997 PORSCHE 911 CARRERA 2 TURBO LOOK, 993 ALL (1997, 1997) 1997 PORSCHE 911 CARRERA 2, 993 ALL (1997, 1997) 1997 PORSCHE 911 CARRERA 2S, 993 ALL (1997, 1997) 1997 PORSCHE 911 CARRERA 4 99335193901 (1997, 1997) 1997 PORSCHE 911 CARRERA 4 TURBO LOOK, 993 ALL (1997, 1997) 1997 PORSCHE 911 CARRERA 4, 993 ALL (1997, 1997) 1997 PORSCHE 911 CARRERA 4S, 993 ALL (1997, 1997) 1997 PORSCHE 911 CARRERA TARGA 99335193901 (1997, 1997) 1997 PORSCHE 911 TURBO 99335193901 (1997, 1997) 1997 PORSCHE 911 TURBO, 993 ALL (1997, 1997) 1998 PORSCHE 911 993 BODY; CARRERA 4S (1998, 1998) 1998 PORSCHE 911 993 BODY; CARRERA 4S #N/A (1998) 1998 PORSCHE 911 993 BODY; EXCEPT TURBO AND CARRERA 4S (1998, 1998) 1998 PORSCHE 911 993 BODY; EXCEPT TURBO AND CARRERA 4S #N/A (1998) 1998 PORSCHE 911 993 BODY; TURBO (1998, 1998) 1998 PORSCHE 911 993 BODY; TURBO #N/A (1998) 1998 PORSCHE 911 (993) CARRERA 2 ALL (1998) 1998 PORSCHE 911 (993) CARRERA 2 TURBO LOOK ALL (1998) 1998 PORSCHE 911 (993) CARRERA 2S ALL (1998) 1998 PORSCHE 911 (993) CARRERA 4 TURBO LOOK ALL (1998) 1998 PORSCHE 911 (993) CARRERA 4S ALL (1998) 1998 PORSCHE 911 (993) TURBO ALL (1998) 1998 PORSCHE 911 CARRERA 2 TURBO LOOK, 993 ALL (1998, 1998) 1998 PORSCHE 911 CARRERA 2, 993 ALL (1998, 1998) 1998 PORSCHE 911 CARRERA 2S, 993 ALL (1998, 1998) 1998 PORSCHE 911 CARRERA 4 TURBO LOOK, 993 ALL (1998, 1998) 1998 PORSCHE 911 CARRERA 4S 99335193901 (1998, 1998) 1998 PORSCHE 911 CARRERA 4S, 993 ALL (1998, 1998) 1998 PORSCHE 911 TARGA 99335193901 (1998, 1998) 1998 PORSCHE 911 TURBO, 993 ALL (1998, 1998) [img-12142-left-large_default]
Carbotech CT961 Brake Pads
Carbotech Brakes Carbotech CT961 Brake Pads from $134.00
Carbotech CT961 Brake Pads Fitting the Stoptech ST-22 calipers and calipers used on many Nissan & Subaru rear axle positions, the Carbotech CT961 is available in Carbotech 1521, AX6, XP8, XP10, XP12 and XP20 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT961 Brake Pads Ford & Mazda Front Details: Manufacturer: Carbotech Manufacturer Part Number: CT961 Available compounds: 1521, AX6, XP6, XP8, XP10, XP12 Most popular track combination: XP10 Front, XP8 Rear Hawk cross reference: HB180._560 Material thickness of pad of backing plate and pad material: .560" Material thickness of pad of backing plate and pad material: 14mm CARBOTECH BRAKE COMPOUNDS   Carbotech 1521 The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800 F (426 C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6 for street driving as well, even though Carbotech doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10 , but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech CT961 Brake Pads Fitment: 2002 MITSUBISHI LANCER EVOLUTION (2002) 2003 INFINITI G35 BREMBO BRAKES (2003) 2003 MITSUBISHI LANCER EVOLUTION (2003) 2003 MITSUBISHI LANCER MR485499 (2003) 2003 MITSUBISHI LANCER EVOLUTION ALL (2003) 2003 NISSAN 350Z WITH BREMBO BRAKES (2003) 2003 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2003) 2003 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2003) 2003 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2003) 2003 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2003) 2004 INFINITI G35 RWD - BREMBO BRAKES (2004) 2004 MITSUBISHI LANCER EVOLUTION (2004) 2004 MITSUBISHI LANCER MR485499 (2004) 2004 MITSUBISHI LANCER EVOLUTION ALL (2004) 2004 NISSAN 350Z WITH BREMBO BRAKES (2004) 2004 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2004) 2004 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2004) 2004 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2004) 2004 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2004) 2004 SUBARU IMPREZA WRX STI (2004) 2004 SUBARU IMPREZA WRX STI ALL (2004) 2005 MITSUBISHI LANCER EVOLUTION (2005) 2005 MITSUBISHI LANCER MR449086 (2005) 2005 MITSUBISHI LANCER EVOLUTION ALL (2005) 2005 MITSUBISHI LANCER EVOLUTION MR ALL (2005) 2005 MITSUBISHI LANCER EVOLUTION RS ALL (2005) 2005 NISSAN 350Z WITH BREMBO BRAKES (2005) 2005 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2005) 2005 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2005) 2005 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2005) 2005 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2005) 2005 SUBARU IMPREZA WRX STI (2005) 2006 MITSUBISHI LANCER EVOLUTION (2006) 2006 MITSUBISHI LANCER MR485499 (2006) 2006 MITSUBISHI LANCER EVOLUTION ALL (2006) 2006 MITSUBISHI LANCER EVOLUTION MR ALL (2006) 2006 MITSUBISHI LANCER EVOLUTION RS ALL (2006) 2006 MITSUBISHI LANCER EVOLUTION SE ALL (2006) 2006 NISSAN 350Z WITH BREMBO BRAKES (2006) 2006 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2006) 2006 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2006) 2006 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2006) 2006 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2006) 2006 SUBARU IMPREZA WRX STI (2006) 2007 MITSUBISHI LANCER MR485499 (2007) 2007 NISSAN 350Z WITH BREMBO BRAKES (2007) 2007 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2007) 2007 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2007) 2007 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2007) 2007 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2007) 2007 SUBARU IMPREZA WRX STI (2007) 2007 SUBARU IMPREZA WRZ STI LIMITED ALL (2007) 2008 NISSAN 350Z WITH BREMBO BRAKES (2008) 2008 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2008) 2008 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2008) 2008 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2008) 2008 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2008) 2008 SUBARU IMPREZA WRX STI (2008) 2008 SUBARU IMPREZA WRX STI ALL (2008) 2009 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2009) 2009 NISSAN 350Z GRAND TOURING D4060CD01B (2009) 2009 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2009) 2009 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2009) 2009 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2009) 2009 SUBARU IMPREZA WRX STI (2009) 2009 SUBARU IMPREZA WRX STI ALL (2009) 2010 SUBARU IMPREZA WRX STI (2010) 2010 SUBARU IMPREZA WRX STI ALL (2010) 2011 SUBARU IMPREZA WRX STI (2011) 2011 SUBARU IMPREZA WRX STI ALL (2011) 2012 SUBARU IMPREZA WRX STI (2012) 2012 SUBARU IMPREZA WRX STI ALL (2012) 2013 SUBARU IMPREZA WRX STI (2013) 2013 SUBARU IMPREZA WRX STI ALL (2013) 2014 SUBARU IMPREZA WRX STI (2014) 2014 SUBARU IMPREZA WRX STI ALL (2014) 2015 SUBARU WRX STI 26696FG000 (2015)
Image of Ferodo FRP3054G DS3.12 Stoptech ST-60 Caliper Brake Pads
Ferodo Ferodo FRP3054G DS3.12 Stoptech ST-60 Caliper Brake Pads $948.87
Ferodo FRP3054G DS3.12 Brake Pads Fitting the Stoptech ST-60 Caliper in the Ferodo DS3.12 track only compound, the Ferodo 3054G DS3.12 brake pad has the flattest torque curve across the largest temperature range with very high torque for repeatable stops, lap after lap. Ferodo 3054G DS3.12 Details: Manufacturer: Ferodo Manufacturer part number: FRP3054G-N Pads in box: 4 Primary Use: Endurance Race Application: Downforce Touring Car, Extreme GT, Time Attack Highest friction coefficient and bite in the Ferodo Racing range Reproducible and stable performance up to 850 C under all pressure and speed conditions Excellent management of ABS during the brake event Longest pad life of Ferodo Racing range under heavy duty track use Recommended for track use on larger vehicles with ABS Recommended for sprint and medium duration races Ferodo DS3.12 Brake Compound Details: The Ferodo DS3.12 is a track only compound with the flattest torque curve across the largest temperature range with very high torque. The Ferodo DS3.12 is identified with production code "G" and is the latest evolution in the Ferodo's DS track-only brake pad line. Designed for Hyper, Super and modern sports cars that have increased horsepower, more aero, higher curb weight, and stickier tires.These attributes all place greater demands on the vehicle’s ABS system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Out of all the pad compounds we have ever tested, even from manufacturers, the DS3.12 shows the flattest torque curve across the broadest temperature range. That means that on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu than all of Ferodo’s other compounds, so not as much leg pressure is required to initiate the desired response. It is also unfadable, showing no drop in performance at any temp your brakes will ever see. In dyno testing, the DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to the discs. We believe the DS3.12 will become the gold standard to which other race compounds will be compared. Ferodo FRP3054G DS3.12 Brake Pad Fitment: Stoptech ST-60
Image of Ferodo FRP3054W DS1.11 Stoptech ST-60 Caliper Track Only Brake Pads
Ferodo Ferodo FRP3054W DS1.11 Stoptech ST-60 Caliper Brake Pads $934.32
Ferodo FRP3054W DS1.11 Brake Pads Fitting the Stoptech ST-60 Caliper, the Ferodo FRP3054W in the DS1.11 compound is a long duration endurance race brake pad that is also used in the Red Group of advanced track day drivers. Featuring a flat torque curve with an intermediate profile, the Ferodo DS1.11 is repeatable across the entire temperature range, making it a great choice for many track drivers and racers. Ferodo FRP3054W DS1.11 Details: Manufacturer: Ferodo Manufacturer part number: FRP3054W-N Compound: DS1.11 Primary Use: Heavy Duty Endurance Race Street use: No Track only: Yes Application: All vehicle types Average Coefficient of Friction: 0.46µ Temperature Range C: 200 - 750 C Temperature Range F: 392 - 1382 F Compatible with ceramic discs: No Compatible with iron discs: Yes Ferodo DS1.11 Brake Compound Details:The Ferodo DS1.11 is a long duration endurance pad with an incredible flat torque curve across the workable range of 392 to 1382 . Designed to put you on the podium of your next World Racing League race, the Ferodo DS1.11 is a track only pad that is designed for repeatable stopping performance and feel across a very wide temperature spectrum. The Ferodo DS1.11 brake compound makes the chassis repeatable in every brake zone, lap after lap. The cold friction profile of the Ferodo DS1.11 is predictable and grows linear as your pad heats up with very good fade resistance all the way to its maximum 1382 F limit. Another common use of the Ferodo DS1.11 is an advanced track day driver in the red group in a well set-up chassis with sticky rubber and aero. Ferodo FRP3054W DS1.11 Brake Pads Fitment: Stoptech ST-60 Calipers
Image of Ferodo FRP3054H DS2500 Stoptech ST-60 Caliper Brake Pads
Ferodo Ferodo FRP3054H DS2500 Stoptech ST-60 Caliper Brake Pads $563.25
Ferodo FRP3054H DS2500 Brake Pads Fitting the Stoptech ST-60 caliper the Ferodo FRP3054H in the DS2500 compound is one of the best street/track pads available. No need to change to track pads and then to street pads every weekend. Now enjoy linear high-torque braking on the best of mountain rides and mild track days. Ferodo FRP3054H DS2500 Brake Pads Details: Manufacturer: Ferodo Manufacturer part number: FRP3054H-N Primary Use: Street Performance & Light Track Application: All vehicle types Average Coefficient of Friction: 0.41µ Temperature Range C: 0 - 500 C Temperature Range F: 32 - 932 F Ferodo DS2500 Brake Compound Details:The Ferodo DS2500 is the best hybrid street and track day pad available. Designed for driving on the street, mountain runs and light track day with a stable average friction coefficient of 0,41 over a wide working temperature range of 32 to 932 F, (0 to 500 C)Featuring a moderately high initial bite and the solid fade resistance of a trackpad, but with relatively low dust and noise levels of a street pad. When the Ferodo DS2500 is used as a street pad, it can produce some squeal on most vehicle platforms. The most common use of the Ferodo DS2500 is mountain runs, autocross, and some light track duty on street tires in colder temperatures.When used on track on heavy (3,000+ lbs.+) track cars with high horsepower and R Compound tires, the DS2500 pad wear rates tend to be considerably higher vs. Ferodo Racing's other compounds. Do not expect to win the WRL GTU class on Ferodo DS2500 brake pads, but it is the perfect dual purpose street and light track day pad. Ferodo FRP3054H DS2500 Brake Pad Fitment: Stoptech ST-60
Carbotech CT345 Race Pads for Stoptech ST-41 Caliper
Carbotech Brakes Carbotech CT345 Race Pads for Stoptech ST-41 Caliper from $178.00
Carbotech CT345 Race Pads for Stoptech ST-41 Caliper Carbotech CT345 fits Stoptech ST-41 and many Porsche, Ferrari & Audi applications the Carbotech CT345 Brake Pads are available in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. G-Loc GPM345 Brake Pad Details: Manufacturer: G-Loc Manufacturer part number: GP345 Compounds available: 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 Most popular track combination: XP10 Front, XP8 Rear G-Loc cross reference: GP345 Hawk cross reference: HB170.650 Material thickness of pad of backing plate and pad material: .650" Material thickness of pad of backing plate and pad material: 17mm G-Loc Brake Compounds Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. G-LOC GP345 Brake Pad Fitment: StopTech ST-41 1979 PORSCHE 911 SC H6 3 GAS FI (1979) 1980 PORSCHE 911 SC H6 3 GAS FI (1980) 1981 PORSCHE 911 SC H6 3 GAS FI (1981) 1982 PORSCHE 911 SC H6 3 GAS FI (1982) 1983 PORSCHE 911 SC H6 3 GAS FI (1983) 1987 PORSCHE 911 TURBO CARRERA H6 3,3 GAS FI (1987) 1988 PORSCHE 911 TURBO CARRERA H6 3,3 GAS FI (1988) 1989 FERRARI 348 TS BASE V8 3,4 GAS FI (1989) 1989 PORSCHE 911 CARRERA 4 H6 3,6 GAS FI (1989) 1989 PORSCHE 911 TURBO CARRERA H6 3,3 GAS FI (1989) 1990 FERRARI 348 TB BASE V8 3,4 GAS FI (1990) 1990 FERRARI 348 TS BASE V8 3,4 GAS FI (1990) 1990 PORSCHE 911 CARRERA 4 H6 3,6 GAS FI (1990) 1991 FERRARI 348 TB BASE V8 3,4 GAS FI (1991) 1991 FERRARI 348 TS BASE V8 3,4 GAS FI (1991) 1991 PORSCHE 911 CARRERA 2 H6 3,6 GAS FI (1991) 1991 PORSCHE 911 CARRERA 4 H6 3,6 GAS FI (1991) 1992 FERRARI 348 TB BASE V8 3,4 GAS FI (1992) 1992 FERRARI 348 TB SERIES SPECIALE V8 3,4 GAS FI (1992) 1992 FERRARI 348 TS BASE V8 3,4 GAS FI (1992) 1992 FERRARI 348 TS SERIES SPECIALE V8 3,4 GAS FI (1992) 1992 PORSCHE 911 CARRERA 4 H6 3,6 GAS FI (1992) 1992 PORSCHE 968 BASE WITH STANDARD SUSPENSION L4 3 GAS FI (1992) 1993 FERRARI 348 GTB BASE V8 3,4 GAS FI (1993) 1993 FERRARI 348 GTS BASE V8 3,4 GAS FI (1993) 1993 PORSCHE 911 CARRERA 4 H6 3,6 GAS FI (1993) 1993 PORSCHE 968 BASE WITH STANDARD SUSPENSION L4 3 GAS FI (1993) 1994 FERRARI 348 GTB BASE V8 3,4 GAS FI (1994) 1994 FERRARI 348 GTS BASE V8 3,4 GAS FI (1994) 1994 PORSCHE 911 CARRERA 4 H6 3,6 GAS FI (1994) 1994 PORSCHE 968 BASE WITH STANDARD SUSPENSION L4 3 GAS FI (1994) 1995 FERRARI F355 BERLINETTA BASE V8 3,5 GAS FI (1995) 1995 FERRARI F355 GTS BASE V8 3,5 GAS FI (1995) 1995 PORSCHE 968 BASE WITH STANDARD SUSPENSION L4 3 GAS FI (1995) 1996 FERRARI F355 BERLINETTA BASE V8 3,5 GAS FI (1996) 1996 FERRARI F355 GTS BASE V8 3,5 GAS FI (1996) 1996 FERRARI F355 SPIDER BASE V8 3,5 GAS FI (1996) 1997 FERRARI F355 GTS BASE V8 3,5 GAS FI (1997) 1997 FERRARI F355 SPIDER BASE V8 3,5 GAS FI (1997) 1998 FERRARI F355 F1 BASE V8 3,5 GAS FI (1998) 1998 FERRARI F355 GTS BASE V8 3,5 GAS FI (1998) 1998 FERRARI F355 SPIDER BASE V8 3,5 GAS FI (1998) 1999 FERRARI F355 BASE V8 3,5 GAS FI (1999) 1999 FERRARI F355 SPIDER BASE V8 3,5 GAS FI (1999)
Carbotech CT31 Brake Pads - Stoptech STR-21
Carbotech Brakes Carbotech CT31 Brake Pads - Stoptech STR-21 from $134.00
Carbotech CT31 Brake Pads - Stoptech STR-21 Carbotech Brake Pads for Stoptech STR-21 calipers. Carbotech CT31 Brake Pads are offered in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT31 Brake Pads - Stoptech STR-21 Details: Manufacturer: Carbotech Manufacturer Part Number: CT31 G-Loc cross reference: GP31 Hawk cross reference: HB172._500 Material thickness of pad of backing plate and pad material: .500" Material thickness of pad of backing plate and pad material: 13mm Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT31 Brake Pads - Stoptech STR-21 Fitment: Stoptech STR-21 calipers