AiM 5 Pin 712 to 7 Pin 712 Cable for SmartyCam HD 2.1 to Solo DL, MXS, MXG & MXL2 - 2 Meter 1 "a"

$69.95

AiM 5 Pin 712 to 7 Pin 712 Cable for SmartyCam HD 2.1 to Solo DL, MXS, MXG & MXL2 - 2 Meter

$69.95

AiM 5 Pin 712 to 7 Pin 712 Cable for SmartyCam HD 2.1 to Solo DL, MXS, MXG & MXL2 - 2 Meter

The AiM V02566070 CAN cables have a male 5-pin 712 (screw-in) connector and a 7-pin 712 (screw-in) connector to connect the AiM SmartyCam HD 2.1 (version 2.1 black box looking camera) to your Solo DL, MXS, MXG, MXL2 in the shorter 2 meter length. This cable also is used to connect your AiM SmartyCam HD (version 1) to your AiM logger or SMC Bridge.

AiM 5 Pin 712 to 5 Pin 712 Cable Details:

  • Manufacturer: AiM
  • Manufacturer part number: V02566070
  • Alternate part number: AIM-MC-267
  • SmartyCam HD 2.1 to Solo DL, Mychron 5, MXS, MXP, MXG, MXL2 sync cable
  • Included with all SmartyCam HD kits
  • Length: 2 Meters (6ft)


Note: Not compatible with the original SmartyCam (gray unit with the viewing screen on top) or the later SmartyCam HD "Rev 1". The version 1 can be identified by a 7/8" diameter lens with either a 67 or 87 degree field of view, and a viewfinder flush with the front of the housing. Later SmartyCam HD Rev 2 had a larger 1 3/8" OD lens marked as 60 or 120 degree field of view and a cover over the front viewfinder held on by 8 screws.

Driver Gear

If you wear it to protect yourself while racing, the DiscoveryParts.com Driver Gear collection is where you'll find it!

Shop Driver Gear

Set Up & Trackside

Keep your team safe, prepared, and ready to go with the latest crew gear. Because no matter how many laps you have, how light your helmet is, what your last dyno number is, if your team does not get you to the line on time, you can not win.

Racecar Gear

If you mount it on or install it in your vehicle for track days or wheel-to-wheel racing, the DiscoveryParts Racecar Gear collection is where you'll find it!