Driver Gear > HANS Devices > 6-Point HNR Devices

HANS Pro Ultra Lite The Ultimate Carbon Fiber HANS Device The HANS Pro Ultra Lite 20 Degree is both SFI 38.1 and FIA approved. With aerospace-grade carbon, the HANS Pro Ultra Lite Head Restraint is over 100 grams lighter compared to its Ultra counterpart. Not only does it save on weight, its smaller size helps with entry and exit from even smaller, tighter racecars. The HANS Device Pro Ultra Lite Head Restraint is constructed of 100% carbon fiber with a hollow core for increased weight reduction without sacrificing strength. Its sliding tethers offer superior visibility for the driver. Includes HANS posts (button-style) for your SA2015 helmet. Discovery Parts carries only dual-certified FIA/SFI HANS devices to ensure all customers are getting a HANS device that will work with their sanctioning body.    

HANS Device Sport 3 Head Restraints HANS Device Sport 3 Head Restraints are the lightest HANS Sport Series device to date. HANS Device Sport 3 Head Restraints present a contemporary approach to building a lightweight, strong, and safe HANS Device. Now in the third generation, HANS Device Sport 3 Head Restraints have a new design and polymer with a hollow collar which reduces the weight significantly. Its engineered reinforcements guarantee a very strong structure with a reduced mass. HANS Device Sport 3 Head Restraints provide the same level of safety as every HANS Device with the lightest, most comfortable injection-molded HANS made to date. HANS Device Sport 3 Head Restraints are developed with ease of driver entry/exit in mind. Its rounded back is lower than the original HANS Device design, reducing the risk of getting caught on a roll cage or in window openings when moving in and out of a racecar. Authentic HANS Devices set the standard in top performance in lab crash testing and real-life race crash results. The HANS Sport 3 is only available in a 20o Layback Angle configuration, suitable for the majority of racing applications including most Stock Cars, Modifieds, Drag, Legends, Bandalero and most road racing cars. However, the HANS Device Sport 3 Head Restraints are not compatible with cars that have extreme layback seats such as formula type cars, IndyCars, etc.       FEATURES: Discovery Parts carries only dual homologation FIA/SFI HANS devices to make sure you're getting the right certification for any racing organization needs. Includes HANS posts (button-style) for your SA2015 helmet. Only 4 oz. (100 g) heavier than the HANS Pro Device! Improved fit, reduced weight compared to past models. Sliding tethers are standard. Injection molded super-structural carbon composite construction. Lower rounded collar saves weight and allows for easier entry/exit in many smaller, tighter vehicles.

Youth Size HANS III Device with Tether and Posts No smoke and mirrors, just #1 performance! The HANS Device is synonymous with head and neck restraint technology. It is the most widely used and recognized head and neck restraint in motorsports, the product that all other products on the market are measured against. HANS Devices are used in most racing series. The HANS Device HANS III Youth Series makes the lightest-weight composite HANS device in the world available in youth sizes! These devices feature an all-new design of polymer with a hollow collar that significantly reduces weight. The engineered reinforcements offer exceptional strength with the same high level of safety as every HANS device. The reduced overall mass and weight give extra comfort and movement, well suited for the youth racer. The HANS III youth series will fit neck sizes of 11-14 inches (28-36 cm). Choose from two tether/post styles: standard HANS FIA 8858-2010 Clip In/Out; or SFI 38.1 Quick-Release. FEATURES: The lightest weight composite HANS device offered. Engineered reinforcements with hollow collar. Posts and tether included, standard or QR. Exceptional comfort and movement. Suited for the youth racer. Fits neck sizes of 11-14 inches (28-36 cm). SFI 38.1 certified. The Youth Size HANS Device Sport III is value priced with the same performance as the Professional Series HANS Device. It is constructed from an injection molded super-structural carbon composite. The lower, rounded collar saves weight and allows for easier entry/exit in many smaller, tighter spaces. Sliding tethers come standard.

NecksGen REV2 Carbon New for 2020, the NecksGen REV2 Carbon is the lightest head and neck restraint device ever to be approved, showcasing NecksGen's commitment to leading the way in state-of-the-art, safe, comfortable, yet affordable products in the racing safety market. The simple, easy to use design carries over from the popular REV2 Lite, with the same level of certification and safety as all NecksGen head and neck restraints. The NecksGen REV2 Carbon design features their patented yokeless and beltless design, while also incorporating their patented single-tension neutralizing tether system. The adjustable tether makes setting your slack and range of motion quick and simple. With the goal of improving ergonomics and safety, NecksGen's state-of-the-art carbon manufacturing results in a new device that is both stronger and lighter than its predecessors as well as being contoured to the body. This gives the driver more comfort and freedom of movement than any other head and neck restraint device on the market. FEATURES: SFI 38.1 certified, giving you the highest level of protection Quick release helmet hardware comes included at no extra charge

NecksGen REV 2 Lite Head & Neck Restraint NecksGen REV 2 Lite Head & Neck Restraints are safe, incredibly lightweight, and the most comfortable HNR we've worn. At 1.2 lbs (540 grams), the NecksGen REV 2 Lite is as light as, or lighter than, many high-end carbon fiber HNR devices while offering the same level of protection and SFI certification. In addition to the quality you expect from NecksGen, the REV 2 Lite features a new adjustable tether system and higher belt guides to keep the driver securely in position in the event of a variety of impact angles and situations. NecksGen REV 2 Lite Head Restraints have rubber-grip friction pads to keep your device snug and secure on your shoulders for each race. The improved shoulder/clavicle pads are supremely comfortable without adding bulk. NecksGen REV 2 Lite comes with free re-certifications. FEATURES Impact Protection: NecksGen REV 2 Lite provides superior lateral and angular impact protection. Comfort: Without a frontal yoke, NecksGen REV 2 Lite eliminates pressure on the driver collar bone and body. A low-profile design allows for a full range of head motion without rear or forward helmet interference. Clearance: The device low-profile design allows for improved movement, meaning the seat and helmet will have minimal interference when the Necksgen REV 2 Lite is used in the driving position. Single Tether: A single, self-aligning helmet tether allows for a full range of head motion while driving, while also providing superior side impact safety. MADE IN THE USA NecksGen REV 2 Lite Head & Neck Restraints are made in America using the newest lightweight, extremely strong carbon fiber composite Dupont material. All NecksGen head and neck restraints have passed the mandated SFI 38.1 testing procedures. These American-made devices have tested well beyond our own expectations to become the shop favorite! EVERY NECKSGEN REV2 LITE INCLUDES: SFI 38.1 certification Quick-release helmet hardware (including anchor posts for your helmet) Extremely light weight: 540g (1.2 lb) versus 775 to 815g (1.7-1.8 lb) for comparably-priced HNR NecksGen decal kit NecksGen patch

Daily Rental of HANS device at Atlanta Motorsports Park. DiscoveryParts keeps a full fleet of HANS devices to make sure every driver is safe on track.

Rental of a Hans Device in 20 (most vehicles that could/would/had a license plate on it) with ground shipping included. For $100 and a $200 deposit, DiscoveryParts will send you a Hans device in size medium or large for your race weekend.

Stand21 Featherlite Head & Neck Restraint The FeatherLite from Stand21 is a breakthrough technological achievement in the FHR family, offering the absolute highest level of safety while weighing an incredible 310g (0.68 lb.), excluding padding. The use of very high-strength carbon combined with a new, more ergonomic design of the legs makes this FHR the lightest safety device created to date. A revolutionary new integrated strap passage allows seamless new radius of curvature, alleviating discomfort from interference between the helmet, the device, and the seat/headrest. The first Stand21 Featherlites are expected to hit the U.S. in August, and they're sure to be hugely popular among pros and the most demanding amateur drivers. FEATURES: FIA 8858-2010 and SFI 38.1 Certified Weight: 310 grams (11 oz., 0.68 lbs) Unprecedented curvature beam alleviating discomfort between the helmet, FHR, and seat/headrest Revolutionary integral strap passage Available in sizes Medium and Large Available for 20 or 30 incline angles Supplied with black padding, sliding tether, and protective bag New more ergonomic leg design

Stand21 Featherlite Head & Neck Restraint The FeatherLite from Stand21 is a breakthrough technological achievement in the FHR family, offering the absolute highest level of safety while weighing an incredible 310g (0.68 lb.), excluding padding. The use of very high-strength carbon combined with a new, more ergonomic design of the legs makes this FHR the lightest safety device created to date. A revolutionary new integrated strap passage allows seamless new radius of curvature, alleviating discomfort from interference between the helmet, the device, and the seat/headrest. The first Stand21 Featherlites are expected to hit the U.S. in August, and they're sure to be hugely popular among pros and the most demanding amateur drivers. FEATURES: FIA 8858-2010 and SFI 38.1 Certified Weight: 310 grams (11 oz., 0.68 lbs) Unprecedented curvature beam alleviating discomfort between the helmet, FHR, and seat/headrest Revolutionary integral strap passage Available in sizes Medium and Large Available for 20 or 30 incline angles Supplied with black padding, sliding tether, and protective bag New more ergonomic leg design

Stand21 FHR Club Series 3 The Stand21 FHR Club Series 3 has a lightweight, comfortable design that has been proven effective through years of use in countless European racing series. It's now available in the USA through Discovery Parts! The Stand21 FHR Club Series 3 is constructed of thermoplastic-injected resin reinforced with carbon fiber, offering excellent protection in a strong, lightweight frame. The Stand21 uses a modified honeycomb pattern in the body of the Series 3 to remove unnecessary weight while maintaining strength, rigidity and performance. The Stand21 FHR Club Series 3 comes standard without helmet post anchors (if you're upgrading from a previous HANS device, you can use your existing anchors). If you don't already have post anchors, you can add them above and save $10! FEATURES: FIA 8858-2010 certified. Weight (Large): 1.7 lbs. (775 grams) Lighter weight than the HANS Sport 3. Exceptional ergonomics and comfort. Carry bag & clavicle padding included. Available in Medium or Large. Hand-made in France. Helmet post anchors are not included as standard. Add them above and save $10! (If you already use a HANS-brand device, you may not need new post anchors.)

Stilo HANS Zero Head Restraints The Stilo HANS Zero combines the best of the Simpson's HANS development group with a fresh Italian design engineered in partnership with Italian helmet manufacturer Stilo. The result is the absolute extreme in weight saving along with HANS proven safety technology to create the lightest, most comfortable HANS Device ever. Using proprietary techniques and aerospace grade carbon fiber, the Stilo HANS Zero is 15% lighter than the HANS Ultra Lite (now the next-lightest HANS on the market). SFI 38.1 certified and FIA 8858 approved. Made in America. NOTE: 30o Layback, size Medium only (which we've tested and works in both open and closed cars). Give Discovery Parts a call at 888-748-7223 for more details.