AiM Sports

AiM 90 22 Pin Auxiliary Harness for MXP, MXG, MXS & MXL2 Dashes 90 This 90 harness plugs into the 22-pin connector on either the AiM MXP, MXL2, MXM, MXG, MXS dash, and AiM EVO5 Logger. Several of the advanced functions rely on this harness, which is not included with the standard kit. AiM 22 Pin Auxiliary Harness for MXP, MXG, MXS, MXL2 Dashes Details: Manufacturer: AiM Manufacturer part number: V02573020 Alternate part number: MC-249 Harness Angle: 90 The AiM 22 Pin Auxiliary Harness will provide access to the following functions: Analog sensor channels 5, 6, 7, 8 Digital wheel speed sensor inputs 2, 3, 4 Digital 12v outputs 1, 2 RS232 ECU connection The factory harness that comes with the AiM MXG, MXS, MXL2 allows only 4 inputs. If you would like more inputs then this is your harnessFor use with AiM MXS, MXP, MXL2, MXG, and EVO5 Dash/Loggers. Not compatible with older AiM MXL Pro / MXL Pro05 or AiM EVO series. AiM 22 Pin Auxiliary Harness for MXP, MXG, MXS, MXL2 Dashes Primary use: Adding analog sensors greater than 4. Your factory harness will allow up to 4 analog channels (sensors), this may be (1) Water Temperature, (2) Oil Temperature, (3) Oil Pressure and (4) Brake Pressure. Using the AiM 22 Pin Auxiliary harness you now can add four more analog channels (sensors) like (5) Steering Angle, (6) Throttle Position, (7) Gear Box Temperature, and (8) Differential Temp. Another way we see this cable used is independent shock travel (all corners) or engine oil temperature pre-cooler and oil temperature post-cooler.

AiM 22 Pin Aux Harness Straight Connector EVO 5 This straight harness plugs into the 22-pin connector on the AiM logger. Several of the advanced functions rely on this harness, which is not included with the standard kit. If you would like to add 4 more analog channels, 2 more digital connections and connect easily to your RS232 or CAN-2 ECU, the AiM V02586030 is your next best upgrade. The AiM EVO5 Logger 22 Pin Auxiliary Harness will provide access to the following functions: Analog sensor channels 5, 6, 7, 8 Digital wheel speed sensor inputs 2, 3, 4 Digital 12v outputs 1, 2 RS232 ECU connection Can-2 ECU connection The factory harness that comes with the AiM Dash/Logger allows only 4 inputs. If you would like more inputs then this is your harness.For use with AiM EVO5 only. Not compatible with MXG, MXS, MXM, MXL Pro / MXL Pro05 or EVO3. AiM EVO5 Logger 22 Pin Auxiliary Harness Details: Manufacturer: AiM Manufacturer part number: V02586030 Harness Angle: Straight AiM EVO5 Logger 22 Pin Auxiliary Harness Primary use: Adding analog sensors greater than 4. Your factory harness will allow up to 4 analog channels (sensors), this may be (1) Water Temperature, (2) Oil Temperature, (3) Oil Pressure and (4) Brake Pressure. Using the AiM 22 Pin Auxiliary harness you now can add four more analog channels (sensors) like (5) Steering Angle, (6) Throttle Position, (7) Gear Box Temperature, and (8) Differential Temp. Another way we see this cable used is independent shock travel (all corners) or engine oil temperature pre-cooler and oil temperature post-cooler.

AiM 23 Pin Aux Harness for MXS 1.2 Strada, MXP Strada, and MXG 1.2 Strada AiM specially designed wiring and cables for the connection of all AiM electronic components to be useful and fundamental. AiM 23 Pin Aux Harness for MXS 1.2/1.3 Strada, MXP Strada, and MXG 1.2/1.3 Strada Details: Manufacturer: AIM Manufacturer part number: V02573330 AiM 23 Pin Aux Harness for MXS 1.2/1.3 Strada, MXP Strada, and MXG 1.2/1.3 Strada Compatibility: MXS 1.2/1.3 Strada MXP Strada MXG 1.2/1.3 Strada

AiM Primary Harness for MXM, MXS, MXG, MXL2 Dashes This is the harness that comes with new AIM MXM, MXS, MXG and MXL2 dashes. Having a 37 pin connector on the dash side and break-out connections for 12v+, 12V-, CAN ECU connection, K line, analog sensor channels 1,2,3,4, digital wheel speed, optical lap timing sensor input, and CAN expansion. For use when you move your primary AiM Dash Logger from your primary vehicle to your back-up vehicle. Also commonly used to move your AiM system from your race car to your ChampCar or Lemons car. By using a few extra cables you can have your complete AiM data system in more than one vehicle with minimal effort. AiM 37 Pin Primary Harness for MXM, MXS, MXG, MXL2 Dashes Harness Details Manufacturer: AiM Manufacturer part number: V02573010 Analog sensor channels 1, 2, 3, 4  Digital wheel speed channel 1  Optical lap timing sensor input  CAN expansion  Power+ Ground- CAN ECU connection K Line connection

AiM 5 Pin 712 -712 CAN / GPS Extension Cable AiM GPS & CAN extension cable with the 5 pin male going to a 5 pin female connector. The 712 5 pin has 5 pins and a chrome threaded barrel (screw-in) connection. These extension cables are used to lengthen any CAN cable to provide a perfect installation. We use the AiM 712-715 patch cable to lengthen an AiM GPS08 antenna, Data Hub or any other CAN item. These are male on one side and female on the other side, so connecting them is series is allowed. This cable will fit between a SmartyCam GP process and lens, but will not work. You need the AiM SmartyCam GP LVDS Cable for this. AiM 5 Pin 712 -712 CAN / GPS Extension Cable Details: Manufacturer: AIM Manufacturer part number Patch cable, 1m 712 5-pin/m to 712, 5-pin/f CAN: V02552700 Manufacturer part number Patch cable, 2m 712 5-pin/m to 712, 5-pin/f CAN: V02552720 Manufacturer part number Patch cable, 3m 712 5-pin/m to 712, 5-pin/f CAN: V02552730 Manufacturer part number Patch cable, 4m 712 5-pin/m to 712, 5-pin/f CAN: V02552740 End 1: Male 712 5 Pin Screw-in End 2: Female 712 5 Pin Screw-in AiM 5 Pin 712 -712 CAN / GPS Extension Cable Common Uses CAN Extension GPS Extension Data Hub Extension AiM 5 Pin 712 -712 CAN / GPS Extension Cable Lengths Available: 1 Meter (39") 2 Meter (78") 3 Meter (118") 4 Meter (156")

AiM 5 Pin 712 to 7 Pin 712 Cable for SmartyCam HD 2.1 to Solo DL, MXS, MXG & MXL2 - 2 Meter The AiM V02566070 CAN cables have a male 5-pin 712 (screw-in) connector and a 7-pin 712 (screw-in) connector to connect the AiM SmartyCam HD 2.1 (version 2.1 black box looking camera) to your Solo DL, MXS, MXG, MXL2 in the shorter 2 meter length. This cable also is used to connect your AiM SmartyCam HD (version 1) to your AiM logger or SMC Bridge. AiM 5 Pin 712 to 5 Pin 712 Cable Details: Manufacturer: AiM Manufacturer part number: V02566070 Alternate part number: AIM-MC-267 SmartyCam HD 2.1 to Solo DL, Mychron 5, MXS, MXP, MXG, MXL2 sync cable Included with all SmartyCam HD kits Length: 2 Meters (6ft) Note: Not compatible with the original SmartyCam (gray unit with the viewing screen on top) or the later SmartyCam HD "Rev 1". The version 1 can be identified by a 7/8" diameter lens with either a 67 or 87 degree field of view, and a viewfinder flush with the front of the housing. Later SmartyCam HD Rev 2 had a larger 1 3/8" OD lens marked as 60 or 120 degree field of view and a cover over the front viewfinder held on by 8 screws.

AiM 5-Pin 712 to DC (Lighter Plug) Cable for Solo2/Solo2DL Power Your AiM Solo 2 or Solo 2 DL with this 12V Power Cable Using Your Car Cigarette Lighter. Easy to install by threading into your 5-pin bottom port on your AiM Solo 2 or Solo 2 DL so provide endless power throughout your longest races and weekends.  AiM 5-Pin 712 to DC (Lighter Plug) Cable for Solo2/Solo2DL Cord Details: Manufacturer: AiM Manufacturer part number: V02569360 Manufacturer alternate part number: MC-600 Connector end 1: Cigarette Lighter Connector end 2: 5 Pin thread on 712 connector  Fits AiM Solo: No Fits AiM Solo DL: No Fits AiM Solo2: Yes Fits AiM Solo2 DL: Yes This is the same DC power cable as supplied with the AiM Solo2 (standalone). It can also be used to power the Solo2DL if the logger is not already getting power through the vehicle hookup (for example, if it is moved to a different vehicle temporarily). The 5-pin "712" (screw-in) connector fits the port on the bottom of the Solo2 or the left (5-pin) port on the Solo2DL. The other end of the cable has a standard cigarette lighter plug for quick connection to your vehicle's standard 12V power port. Note: For Solo2 or Solo2DL, not for original Solo/SoloDL. The 5-pin connector is not designed to work with any other AiM devices.

AiM 712 5 Pin Male Binder Connector This 712 AiM 5 pin threaded connector with male pins is a common cable end on many AiM CAN connections. If you are shortening or making custom length cables, the AiM 9904130005 Binder 712 5-pin/Male is a common part. AiM 712 5 Pin Male Binder Connector Details: Manufacturer: AIM Manufacturer part number: 9904130005 AiM 712 5 Pin Male Binder Connector Common Uses: AiM 712 Custom length cables Adapting external non-AiM components into your AiM system Replacement of a damaged cable end

AiM 4 Pin 719 Female Connector AiM 4 Pin 719 Female Connector to replace or add to your AiM Data system. AiM 719 fittings are the most commonly used temperature and pressure sensor connector fittings, linear & string potentiometers and AiM extension cables. AiM 4 Pin 719 Female Connector Details: Manufacturer: AiM Manufacturer part number: 997647004 Pins: 4 Connection Type: Female

AiM 4 Pin 719 Male Connector AiM 4 Pin 719 Male Connector to replace or add to your AiM Data system. AiM 719 fittings are the most commonly used temperature and pressure sensor connector fittings, linear & string potentiometers and AiM extension cables. AiM 4 Pin 719 Male Connector Details: Manufacturer: AiM Manufacturer part number: 997677004 Pins: 4 Connection Type: Male

719 to 3-pin 712 Adapter Cable Only for Rotax Temp Sensor This patch cable has a 719 push-on connector at one end and a 3-pin 712 screw-in connector at the other. It is only used in karting applications, usually with the Rotax engine. This is the same cable included with the AiM Rotax Water Temperature Sensor Kit (Part No. AIM-MC-040). 719 to 3-pin 712 Adapter Cable for Rotax Temp Sensor Details:Manufacturer: AiMManufacturer part number: V02PCB15BTRManufacturer MC-041Kart Only: YesCable End 1: 719 push-onCable End 2: 3-pin 712 screw on. 719 to 3-pin 712 Adapter Cable for Rotax Temp Sensor Details: Manufacturer: AiM Manufacturer part number: V02PCB15BTR Manufacturer MC-041 Kart Only: Yes Cable End 1: 719 push-on Cable End 2: 3-pin 712 screw on

AiM Brake Pedal Position Sensor, Linear Travel Pot (Auto) The AiM linear short stroke (10mm) displacement potentiometer is most popular ideal for measuring brake pedal movement. A pedal travel sensor such as this can be simpler to install in many vehicles than plumbing a pressure sensor in the brake line. Normally mounted in front of the brake pedal (between the driver and the pedal) so the sensor is depressed when the brakes are off. This will reduce the likelihood of sensor damage or interference with pedal travel in the event of brake fade. The sensor should be mounted close to the pedal pivot, and at an angle that minimizes side loading on the plunger. The compact sensor body measures just 3/4" (19mm) OD x 1 3/8" (35mm) long overall (less plunger). Two 1/4" (6mm) mounting holes are located 1.34" (34mm) center-to-center. This sensor has a 200mm (7 3/4") long cable with the 719 (four-pin plastic push-on type) connector. Use a My Chron 719-719 Patch Cable (Part No. MC-211) to connect to an AiM MXL Pista, MXL Pro, MXL2, MXG, MXS, or MyChron3 Auto dash (except XG-Log). XG-Log and EVO4 require a 712-719 Patch Cable (Part No. MC-210) for connection. AiM Brake Pedal Position Sensor, Linear Travel Pot (Auto) Details: Manufacturer: AiM Manufacturer part number: X05SNLPRSO Alternate part number: AIM-MC-321 Range: 10mm (.375 Inch) Electrical Connection Type: 719 (4 pin push-on style) Mounting eyelet: 6mm (1/4") on 34mm (1.34") bolt centers

AiM Collar Clamp Mount Adapter for SmartyCam GP and HD GP Lightweight, billet and made just for your AiM SmartyCam GP and HD GP, this collar adapter lets you mount your AiM SmartyCam GP or SmartyCam HD GP on any mount with a standard 1/4-20 male stud. The black anodized aluminum collar fits other "lipstick" cameras measuring 24mm (0.94") OD. Measures 10mm (0.4") wide also. AiM Collar Clamp Mount Adapter for SmartyCam GP and HD GP Details: Manufacturer: AiM Manufacturer part number: HSCFKB00A Alternate part number: MC-589 Color: Black Material: Anodized aluminum ID of bore: 24mm ID of bore: 0.94" Width: 10mm Width: 0.4"

AiM Cable for Reverse or Side Mirror Cameras The AIM V02573410 Y-cable is intended specifically to connect two AiM Analog Rear Cameras to your AiM "1.2" version MX-Series dash MXS 1.2/1.3, MXP, or MXG 1.2/1.3 including Strada versions. AiM Cable for Reverse or Side Mirror Cameras Details: Manufacturer: AiM Manufacturer part number: V02566300 This long cable features two length different leads from your dash, one measuring 6 meters (19 feet 8 inches) from the dash and the other camera 4 meters (13 feet). The most common applications are using one camera as a backup camera and another as a rearview mirror or front-facing curb view camera, or for both side mirrors.

AiM 2-Port CAN Powered Data Hub for AiM MXS, MXM, MXG, MXL, EVO3, EVO4 Do you have an AiM Dash like the MXS, MSM, MXG, Pista or MXL and want to run multiple devices like SmartyCam HD's or other power usage items? Then the AIM 2 port powered CAN Data Hub is for you. If you use an ECU bridge or are powering your SmartyCam(s) from your 5 pin cable (using ECU Power), you now can have a more stable power supply to run your cameras for an extended duration. Accepts any AiM CAN accessory, including GPS, LCU-One Lambda Controller, Memory Key, or TC (Thermocouple) Hubs. Any channel can be selected for display on the dash. 15" cable. This allows you to add multiple SmartyCams to you AiM system. AiM 2-Port Powered CAN Data Hub for AiM MXG, MXS, & Pista Details: Manufacturer: AiM Manufacturer Part Number: X08HB2GK0