Stilo S.r.l.

Stilo Acrysol Shield Cleaner for Stilo ST5 Visors (Not for ST6 Visors) NOTE: Do not use Acrysol on any visors other than those for the Stilo ST5. Do not use on Stilo ST6 visors. Stilo ST5 helmet shields have a special inner anti-fog coating that can easily be harmed by any type of ammonia, acidic, or even vinegar-based cleaners. The only safe way to clean the inside of a Stilo ST5 shield is with this very fast drying, ultra-purified solvent-based cleaner. As it is pressurized, this item ships only via ground shipping. DETAILS Manufacturer: Stilo Manufacturer part number: YA0640 Size: 20 oz Aerosol: Yes Approved by Stilo: Yes (for ST5 visors only) Acrysol is commonly used in premium auto body shops. Used primarily for body panel degreasing prior to top color coat application, and is the official Stilo Shield cleaner. How do you clean the inside of a Stilo ST5 shield? We prefer to remove the shield from the helmet and spray a wet mist amount on the inside first. Then quickly and lightly, use a single wiping action to to go from one side to the other going the long way. We then turn the visor over and repeat using the single swipe method. If debris/mud/etc remain, repeat until perfect. Acrysol is the official certified cleaning agent for the Stilo ST5 shield to keep your vision perfect to the front and your competition in the rear view mirror.

Stilo Bottom Rubber Trim for ST5, CMR, and KRT Did you put your Stilo helmet on your Hans device then then in your helmet bag? After a while, the Hans grip material will start to wear through the Stilo bottom rubber seal. One way to prevent this is to place a towel between your Hans device and your helmet so keep the abrasion to a minimum. If you have not been doing this, the this Stilo Replacement Rubber Seal For the Bottom of Your Stilo Helmet is the fix. Fits all Stilo SA2010 and SA2015 helmets. This is a Genuine Stilo Part for a perfect fit. Stilo Bottom Rubber Trim for ST5, CMR, and KRT Details: Manufacturer: Stilo Manufacturer new part number: YA0874 Fitment: ST5, CMR and KRT Helmets In general, YA0660 is the eye port rubber for all ST5 except ABP. YA0874 can be used on all helmets both auto and karting.

Stilo Carbon Curva 8870 Rib Protector Mandatory in FIA Karting Championships, Cups, and Trophies from the 2021 season, the FIA 8870-2018 Standard for Karting Body Protection (KBP) is extremely light and comfortable. A combination that provides superior protection to kids and adults within an all-in-one device. Designed to withstand 60J of energy to the chest and 100J of energy to the ribs, the FIA KBP standard prevents injuries from impacts with flat or curved structures, the steering wheel or edge of the seat, and the steering column. The Stilo Carbon Curva 8870 Rib Protector is engineered for racers who demand top-tier impact protection without sacrificing comfort or mobility. Built from ultra-light carbon fiber and homologated to the latest FIA 8870-2018 karting standard, this is the ultimate kart rib protector for drivers pushing limits in high-impact environments. Whether you're chasing podiums or training hard in the seat, the Carbon Curva keeps you protected and focused. Designed with anatomical shaping and curved carbon panels, the 8870 rib protector contours to your body for a low-profile, custom fit. Adjustable padding and secure shoulder and torso straps offer race-day stability, while breathable materials enhance airflow during long sessions. Trusted by professionals in CIK and national karting series, Stilo delivers serious protection—without the bulk of traditional chest protectors. Stilo Carbon Curva 8870 Rib Protector Highlights FIA 8870-2018 certified rib protector for karting competition Lightweight, high-strength carbon fiber shell with contoured design Ergonomic, adjustable fit with secure torso and shoulder straps Optimized impact absorption for karting, sprint, and endurance formats Built for professional kart racers and serious HPDE competitors Stilo Carbon Curva 8870 Rib Protector Size Chart FAQ – Stilo Carbon Curva 8870 Rib Protector Q: Is the Stilo Carbon Curva 8870 rib protector FIA certified?A: Yes, it is homologated to the latest FIA 8870-2018 karting safety standard, now required in many national and international competitions. Q: What is the main material used in the Carbon Curva rib protector?A: The shell is constructed from carbon fiber, which provides superior impact resistance while remaining ultra-lightweight. Q: Is this rib protector suitable for kids or just adult racers?A: Stilo offers various sizes, making the 8870 rib protector suitable for junior and adult kart racers alike. Q: How is the protector secured to the body?A: It uses adjustable shoulder and waist straps to ensure a tight, comfortable fit that stays in place under race conditions.

Stilo Carbon Curva Rib Protector Stilo Carbon Curva Rib Protector – Ultra-Light Rib Protection for Kart Racers Stilo has developed their patented-technology Kart ‘Carbon Curva’ Rib Protector for the serious kart racer. Unlike other protectors on the market, this protector incorporates a patented fusion of protective carbon and flexible carbon to form a more comfortable, form-fitting solution while offering superior protection. A great fit results in less movement within the protector, increasing both comfort and protection. Made with an ultra-lightweight carbon construction, the Carbon Curva is vailable in Small, Medium and Large sizes. Engineered with a true carbon fiber outer shell and internal energy-absorbing foam, the Stilo Carbon Curva kart rib protector maximizes safety while minimizing bulk. Its contoured, ergonomic shape hugs the body naturally, providing a locked-in feel without restricting upper-body mobility. With an adjustable strap system and multiple size options for youth and adult drivers, the Curva sets the benchmark for modern karting protection. Stilo Carbon Curva Rib Protector Highlights FIA 8870-2018 homologated for karting competition worldwide Real carbon fiber shell for ultra-lightweight, high-impact protection Anatomically curved design for superior fit and movement Adjustable shoulder and torso straps for personalized comfort Available in youth and adult sizing for optimal protection across all age groups Stilo Carbon Curva Rib Protector Size Chart FAQ – Stilo Carbon Curva Rib Protector Q: What materials is the Carbon Curva made from? A: It features a full carbon fiber outer shell and energy-absorbing foam lining for optimal protection and weight reduction. Q: Who should use the Stilo Carbon Curva? A: It’s ideal for both professional and amateur kart racers looking for lightweight, certified rib protection with exceptional comfort. Q: Is it suitable for younger drivers? A: Yes. The Carbon Curva comes in youth and adult sizes, allowing proper fitment for a wide range of drivers. Q: How is the fit adjusted? A: The rib protector includes fully adjustable shoulder and waist straps for a secure and custom fit during racing. Q: Will it fit under a standard karting suit? A: Absolutely. The low-profile design fits comfortably under most modern CIK/FIA-approved suits. Q: How does the Carbon Curva compare to other 8870 rib protectors? A: The Stilo Carbon Curva stands out with its true carbon construction, ultra-lightweight feel, and contoured ergonomic fit designed for high-performance racing.

Stilo ST5 Carbon Peak Visors Introducing the Stilo ST5 8860 Carbon Peak, the perfect accessory to enhance your racing experience. Designed as an optional extra for FIA8860 ST5 helmets, this peak is FIA approved and offers both style and functionality on the track.  Similar to the bill of a ball cap, the ST5 Peak Visor by Stilo is effective at blocking the sunlight from your eyes. The peak visor can be adjusted to the angle of the sun throughout the day. Fitted for the SA2020 Stilo ST5 models, the ST5 peak is the perfect visor for keeping the sun out of your eyes.    Stilo ST5 Peak Visors Details: Manufacturer: Stilo Fits Stilo ST5: Yes Stilo SKU YA0862 Gloss Carbon Fiber (FIA 8859 weave) Stilo SKU YA0863 Gloss Carbon Fiber (FIA 8860 weave)

Stilo Cheek Pads Replacement cheek pads for Stilo ST5 / ST5.1 helmets help you customize your helmet to provide the perfect fit!

Stilo Chin Pad Replacement chin pad for Stilo ST5 / ST5.1 

Stilo ST6 Chin Pad Replacement chin pad for Stilo ST6 Helmets

Stilo Helmet GT Communications Kits Integrate Race Communications Seamlessly With Your Stilo GT-Series Helmet Upgrade your Stilo GT helmet with professional-grade communication kits designed to keep you connected at race pace. Stilo GT-Series helmets feature molded-in ports that allow easy installation of a communications jack, a noise-canceling microphone, and either integrated ear cups with speakers or a 3.5mm jack for your own in-ear monitors. Some kits even offer both options for maximum flexibility! While installation isn’t especially difficult, we recommend professional installation for optimal performance. Have questions? Call us at (844) 438-7244 — we're happy to help you set up your Stilo communications kit. Stilo AE0210 Communications Kit with Ear Cups Manufacturer: Stilo Part Number: AE0210 Microphone: Gentex button-style microphone mounted inside the chin bar padding Speakers: Noise-reducing padded Stilo Ear Cups with integrated speakers Input Jack: Female four-channel Stilo connector The Stilo AE0210 is the most popular in-helmet communications kit for Stilo GT helmets with factory side ports. The button microphone fits neatly into a recess inside the chin bar padding, while the integrated ear cup speakers attach securely with Velcro to the helmet’s side padding for reliable, crystal-clear communication. * Due to supplies inventory, the Stilo AE0210 Communications Kit with Ear Cups is available only with helmet purchases. Supply is limited and offered on a first-come, first-served basis. Stilo AE0214 Communications Kit for Ear Buds Manufacturer: Stilo Part Number: AE0214 Audio Output Jack: 3.5mm female jack for connecting custom earbuds (earbuds not included) Microphone: Gentex button-style microphone installed inside the chin bar padding Input Jack: Female four-channel Stilo connector The Stilo AE0214 is ideal for drivers who prefer custom earbuds over ear cups. If you prioritize lightweight comfort and premium audio quality, this kit lets you integrate your Stilo GT-Series helmet with your personal in-ear monitors while maintaining pro-grade voice clarity with the Gentex button microphone. Stilo AE0110 Ear Cup and Boom Mic Kit Designed for the GT-Series helmet, the Stilo AE0110 integrates a noise-canceling boom microphone and earmuff speakers directly into the helmet’s sideports. Perfect for endurance racing and multi-driver setups, this kit provides outstanding audio quality with fast, seamless connections between driver changes. Stilo AE0320 Ear Cup and Ear Bud Combo Kit Manufacturer: Stilo Part Number: AE0320 Input Jack: Female four-channel Stilo connector Speakers: Noise-reducing padded Stilo Ear Cups with integrated speakers Audio Output Jack: 3.5mm female jack for ear buds (earbuds not included) Microphone: Gentex flex boom microphone The Stilo AE0320 is the ultimate communications upgrade for drivers facing extreme cockpit noise, like those in formula cars or ultra-high compression V8 race cars. This dual electronics kit uses Stilo’s proven ear cup speakers and also allows simultaneous audio through your custom earbuds for unbeatable sound clarity under the most intense conditions. Your Stilo GT helmet is ready for easy installation with pre-designed recesses in the chin bar and cheek pads. The Gentex flex boom microphone ensures optimal placement for minimal background noise and maximum voice clarity—protecting your crew chief's ears and your race-day focus.

Stilo Crown Pads Replacement crown pads for Stilo ST5 helmets help you customize your helmet to provide the perfect fit!

Stilo Ear Pillows for ST4 and ST5 Stilo Spare Ear Pillows for ST4 and ST5 Details: Manufacturer: Stilo Manufacturer new part number: YA0016 Fitment: All ST4 and ST5 helmets

Stilo HANS Helmet Post Anchors (for SA2020 and newer) Stilo branded HANS helmet post anchors to attach your HANS or Stand21 head-and-neck restraint to your Snell SA2020 or newer helmet. (Those helmets have threaded M6 inserts molded into the helmet.) These post anchors are FIA-approved and screw right into those helmet inserts. Stilo's FIA Approved HANS Posts In Black/Blue/Red Anodized Metal With Laser Engraving Dresses Up Every Stilo build. These are the Stilo FIA Internationally Approved Hans Posts. Includes one pair (for one helmet). DETAILS Manufacturer: Stilo Manufacturer part number: AK 1131.12K-Stilo AK113112K-STILO BLACK Manufacturer part number: AK 1131.12B-Stilo AK113112B-STILO BLUE Manufacturer part number: AK 1131.12R-Stilo AK113112R-STILO RED Qty in kit: Two FIA approved

Stilo Helmet Aero Kits These aero kits from Stilo provide all the downforce needed for open-cockpit drivers to reduce helmet lift. They are especially popular for IndyCar, Formula Atlantic, and Radical drivers. Choose between rear aero, front IndyCar kit, or both!

Stilo Helmet Skirt Stilo 2 layer nomex fitted helmet skirt. Fire retardant fitted helmet skirt can be used to help prevent dust and debris from coming inside the helmet. Its design keeps the skirt tight to the helmet without the use of Velcro and helps eliminate dust, smoke or flames from entering the helmet. Fits any ST5 full face helmet. SFI 3.3 approved! Features a cutout for Eject Helmet Removal tube  

Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air System Fresh air keeps you cool and keeps sweat from getting in your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This unique cooling system feeds air from your car's fresh air system to both the top of your head and to the front of your face, while at the same time helping keep the inside of your visor clear. This system integrates into the existing design of the ST5 helmet and does not require any drilling of the shell or modifications to the internal EPS foam. There are four small ventilation holes molded into the top of every ST5 & ST6 helmet. Stilo's Top Air system fits over the forward two holes and extends down the front of the helmet and just under the top of the visor. Air fed into the Top Air is directed both to the top of the head and down over the face. A small deflector just inside the visor area directs air towards the visor and away from the eyes. Old air flows out of the rear holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Top Air System can be fitted to all Stilo ST5 or ST6 model helmets.