Fire System Parts

Please DO NOT pay for the bottle before shipping us your bottle. Print and fill out this FORM SPA AFFF Systems Must Be Inspected and Recertified Every 2 years. This service includes inspection of the bottle, dip tube and firing head, refilling with SPA Lite AFFF fluid, pressurizing to factory-specified pressure with nitrogen, and FIA recertification if applicable. Additional charges may apply if replacement of firing head or other parts is required. Bottles that are up to 2 years past the service due date can be serviced. Bottles that are 2 years and one day past their service due date cannot be serviced (SPA and FIA requirement). Bottles over 5 years old must be hydrostatically tested before service at an extra cost (DOT requirement).* Bottles over 10 years old cannot be serviced (SPA and FIA requirement). Bottles originally designed for gas (Halon / FE-36) or dry chem (powder) cannot be retrofitted with AFFF. Pay now or later? Later. Please do not pay for the bottle before shipping us your bottle. Print and fill out this FORM We will contact you after we receive and inspect your bottle. Shipping: What shipping can I choose for my fire bottle? If it has been discharged, you can ship your bottle to us empty via ground, overnight, 2 or 3 day air. Once your bottle is serviced, DOT regulations will not allow the bottle to be on any aircraft. We must return your fire system bottle via ground shipping ONLY. Return UPS or FedEx Ground shipping. In Store / Same Day Service: Fire suppression systems can be dropped off and/or picked from our store in Dawsonville, GA, or any event our trackside support staff is attending. Same day service is available at the Dawsonville store for an additional $50 charge. Same day service is available during normal store hours except Monday and Saturday. Please call ahead for service availability. Trackside vehicles are not equipped for fire suppression service.  Discharged or Not Discharged: If your SPA Technique fire system has run out of time and needs to be re-certified, usually this is all you will need to inspect, service, and certify your fire bottle. Please do not discharge your bottle prior to shipping, unless you need to ship expedited to DiscoveryParts for service. Old Bottles: The older bottle design with a single weld seam around the middle of the bottle fails the new hydrostatic test about 99% of the time. The newer bottles with a weld seam at each end have a much higher passing rate. If you have an older single-weld bottle, it is likely that the DOT will not allow us to refill it. In most cases, we have new replacement bottles in stock and ready to ship. Shipping your bottle to DiscoveryParts: Create an account at DiscoveryParts.com including your billing and shipping address (if different) If you need help with step 1, call Discovery Parts @ 706-344-1235 Ship your bottle, insured with tracking to: DiscoveryParts-SPA Recharge20 Duck Thurmond RoadUnit B-2Dawsonville, GA 30534

SPA 4 Liter Steel Spare Bottle Only - Manual SPA Technique pre-filled 4 Liter Spare bottle is ready to install. One of the quickest ways to end your race weekend is if your fire system is accidentally discharged. Be prepared with this Spa Technique 4 liter steel bottle that is already filled and fully charged to get you back on track.  **PLEASE NOTE** This replacement bottle will have a manufacture date of 12/2022, as this is when the EX.045.17 certification ended SPA 4 Liter Steel Spare Bottle Only Details: Manufacturer: Spa Technique Manufacturer part number: FIA18-L4SB Bottle material: Steel Size: 4L Agent: AFFF Shipping restrictions: Yes, ground shipping only SPA 4 Liter Steel Spare Bottle Fire Bottle Dimensions (inches): Diameter: 6.1 Length: 17.5 Weight: 15 lbs.   Fitment: Direct replacement for Spa FIA18 4L bottle. 

SPA Decabon (Synflex) 6mm Metal/Composite Tubing per Ft Add Extra Length To Your Spa Fire System Using Synflex Tubing (formerly known as Decabon or Decoron 1300). Decabon / Synflex is easy to form, looks professional and is what is used in SPA fire suppression systems for discharge tubing. A thin aluminum inner layer is covered with a thick plastic outer layer. This combination provides the strength and rigidity of aluminum tubing with the light weight and corrosion resistance of plastic tubing. It is also considerably less expensive than tubing manufactured of corrosion resistant metal. Synflex can be bent by hand (no special tools required), but it will hold its shape like metal tubing. It can be easily cut with a tubing cutter, wire cutters, or even a shop knife (expect to replace the shop knife blade after cutting this tubing). SPA Decabon (Synflex) 6mm Metal/Composite Tubing per Foot Details: Manufacturer: Spa Technique Manufacturer part number: 02SP016 6mm OD: 6mm Part of every SPA Technique Kit: Yes Sold in continuous feet, cut lengths are not returnable. [img-2673-left-large_default]

SPA Decabon (Synflex) 8mm Metal/Composite Tubing per Ft Add Extra Length To Your 8mm Spa Fire System Using Synflex Tubing (formerly known as Decabon or Decoron 1300). Decabon / Synflex is easy to form, looks professional and is what is used in SPA fire suppression systems for discharge tubing. A thin aluminum inner layer is covered with a thick plastic outer layer. This combination provides the strength and rigidity of aluminum tubing with the light weight and corrosion resistance of plastic tubing. SPA Decabon (Synflex) 8mm Metal/Composite Tubing per Foot Details: Manufacturer: Spa Technique Manufacturer part number: 02SP032 8mm OD: 8mm Part of every SPA Technique Kit with 8mm tubing: Yes Bending Decabon: It is also considerably less expensive than tubing manufactured of corrosion resistant metal. Synflex can be bent by hand (no special tools required), but it will hold its shape like metal tubing. Cutting Decabon: It can be easily cut with a tubing cutter, wire cutters, or even a shop knife (expect to replace the shop knife blade after cutting this tubing). We cut the tubing in our warehouse using a small hand held tubing cutter below. Sold in continuous feet, cut lengths are not returnable.

Professional Refill/Re-Certification of Electrically-Actuated Fire Bottle NOTE: Before you send us your SPA Technique fire suppression system bottle, please print, fill out, and submit this Discovery Parts SPA Technique Re-Certification Form. SPA AFFF systems must be inspected and re-certified every two years. This service includes inspection of the bottle, dip tube and firing head; refilling with SPA AFFF fluid; nitrogen pressurization to factory specification; and FIA recertification when applicable. Additional charges apply if replacement of the firing head or other parts is required. SPA AFFF Refill & Re-Certification Details: Bottles that are not more than two years past the service-due date can be serviced. Bottles that are more than two years past their service-due date cannot be serviced (SPA and FIA requirement). Bottles over five years old must be hydrostatically tested before service at an extra cost (DOT requirement). Bottles over ten years old cannot be serviced (SPA and FIA requirement). Bottles originally designed for gas (Halon / FE-36) or dry chem (powder) cannot be retrofitted with AFFF. Please print, fill out, and submit this Discovery Parts SPA Technique Re-Certification Form. Shipping Your Fire Bottle If your fire bottle has been completely discharged, you can ship it to us empty via overnight, two- or three-day air, or ground. Once your bottle is serviced by Discovery Parts, however, DOT regulations require that we return your fire bottle via ground shipping. It can not be returned via air transport. Return UPS or FedEx ground shipping is included with this service. In Store/Same Day Fire Bottle Service Fire suppression systems can be dropped off at our store at Atlanta Motorsports Park in Dawsonville, GA, or at our mobile trackside support vehicle at any race event our trackside support staff are attending. Same-day service can be performed at our Dawsonville, GA, store for an additional $50 charge. Same-day service is available during regular store hours, Tuesday through Friday. Please call ahead at (888) 748-7223 to inquire about same-day service availability. Our trackside support vehicles are not equipped to perform same-day fire suppression system service. Do Not Discharge An Intact Fire Bottle If your SPA Technique electrically-actuated fire system certification has expired and it needs to be re-certified, our refill and re-certification service is typically all you will need. Do not discharge your fire bottle if it is still charged. If you discharged your SPA electrical fire system, you will need to either replace or re-arm the electrically actuated firing head. You can re-arm the firing head with the SPA-SP-02-001. A Note About Old Fire Bottles Older bottles with a single welded seam around the middle fail the new hydrostatic test about 99% of the time. Newer bottles with welded seams at each end have a much higher passing rate. If you have an older bottle, it is likely that the DOT will not allow us to refill it. In that case, we usually have new replacement bottles in stock and ready to ship. Shipping Your Bottle To Discovery Parts Create an account at Discovery Parts Ship your bottle, insured and with tracking, to: Discovery Parts SPA Recharge20 Duck Thurmond RoadUnit B-2Dawsonville, GA  30534

  SPA Technique 6" Bottle Mount Bracket Spa Technique Replacement Bottle Mount for all 6" Diameter Bottles. This is included with all Spa Technique systems that include a 6" diameter bottle. Get genuine Spa Technique replacement parts, like this fire bottle mount clamp to keep your race car on-track safely. Fits 4L, 3.375L, 2.25L and Extreme 2.5Kg, 3.0Kg, and 4.0Kg bottles with 6" Diamater. This is quantity one, two are required for install. SPA Technique 6" Bottle Mount Bracket Details: Manufacturer: Spa Technique Manufacturer part number: SPAT 126 Part Type: Bottle Clamp Diameter: 6" Quantity in kit: One

SPA Dip Tube Assembly for MFM400, 75S & HPC225 SPA Replacement Dip Tube Assembly for MFM400, 75S and HPC225 Series Fire Systems SPA Dip Tube Assembly - MFM400/75S & HPC225 Details: Manufacturer: SPA Technique Manufacturer Part Number: 02-SP-124 Fits MFM400 bottle: Yes Fits HPC225 bottle: Yes

SPA Dip Tube Assembly MFE75/400 & LWE75SC Inside your SPA Technique MFE75, MFE 400 and LWE 75SC electrically discharged bottles there is a flexible pick-up tube with a weighted end. This tube draws AFFF agent from within the bottle when you discharge your system. It is designed to find the lowest position inside the bottle regardless of your vehicle's orientation to the ground. SPA Dip Tube Assembly Details: Manufacturer: SPA Technique Manufacturer part number: 02-SP-049 The SPA Dip Tube Assembly MFE75/400 & LWE75SC, part number 02-SP-049, is not a user-serviceable part. This part is inside the sealed, pressurized fire extinguisher bottle and must only be changed during a fire bottle service by a trained technician. Do not attempt to replace this part yourself.

SPA Technique Fire System Pull Cable - 12 feet The 12 foot pull cable can be used with all of SPA's mechanical fire systems. Replace a worn or damaged pull cable with this easy to install replacement.

SPA Fire System Pull Cable - 6 Ft The 6-foot pull cable can be used with all of SPA's mechanical fire systems. Replace a worn or damaged pull cable with a Genuine SPA Technique fire system discharge pull cable kit. OEM replacement Manufacturer: SPA Manufacturer Part Number: SPA-02-SP-018 Length: 6'  

Spa Decabon T Fitting - 6mm SPA T fitting for 6mm Decabon tubing used with SPA fire systems. If you are running your fire discharge outlet line and need to split it into 2 areas, this is the way to do it correctly. Can I run this SPA T fitting with my aluminum line from another manufacturer? NO. SPA tubing and fittings are unique to themselves and are not interchangeable with other manufacturers. SPA Decabon Tee Fitting - 6mm Details: Manufacturer: SPA Technique MAnufacturer part number: 02-SP-015 Trade name: "T" Fitting Usage: Connecting 3 pieces of Decabon tubing together [img-4410-left-large_default]

SPA Pressure Gauge 8-12 bar SPA Pressure Gauge 8-12 bar SPA Pressure Gauge 8-12 bar Details: Manufacturer: Spa Technique Manufacturer part number: 02-SP-040 Range: 8-12 bar

SPA Mechanical Bottle Safety Pin Lanyard Lost the lanyard and red streamer that keep the safety pin in your mechanical SPA Technique fire system bottle? Look no further, this is the direct replacement for your lost safety pin lanyard. SPA Mechanical Bottle Safety Pin Lanyard: Manufacturer: SPA Technique Manufacturer part number: SP142-L Trade name: Mechanical Bottle Pull Pin Safety Lanyard & Streamer

SPA 6mm Straight Connector SPA straight connector fitting for 6mm Decabon tubing used with SPA fire systems. If you need to connect two 6mm decabon discharge lines, this is the way to do it correctly. This is also called a "straight union". Can I run this SPA straight connector fitting with my aluminum line from another manufacturer? NO. SPA tubing and fittings are unique to themselves and are not interchangeable with other manufacturers. SPA 6mm Straight Connector Details: Manufacturer: SPA Technique MAnufacturer part number: SP-038 Trade name: Straight Union Usage: Connecting 2 pieces of tubing [img-8737-left-large_default]

SPA Technique Power Pack & Test Module SPA Technique Replacement Power Pack & Test Module. This is the Fire System Power Pack that comes in every electrically discharged SPA Technique fire system from the factory. There is a simple two-step test feature that not only checks the internal 9V battery, but also the system wiring connection. Professional teams know the value of a well-thought-out fire system and check this system before every run. You should, too. We advise locating the SPA Technique Fire System Power Pack within the driver's reach, making it easy to arm and disarm. This helps prevent accidental discharge. SPA Technique Power Pack & Test Module Details: Manufacturer: SPA Technique Manufacturer part number: ELEC-004 Connector style: Hirschmann (3 pin, 1/4"-diameter connector)

SPA Technique Electrical Firing Head Re-Arm If you discharged your SPA Technique electrical fire system, your electrically controlled firing head must be re-armed. Inside the electrically controlled firing head, there is a squib charge that punctures the rupture disk and allows the agent to be released from the bottle. This re-arming service is needed to make your electrically actuated SPA Technique fire system operable again. SPA Technique Electrical Firing Head Re-Arm Details: Manufacturer: SPA Technique Manufacturer part number: 02-SP-001H Actuation type: electrical only If your system has not been discharged, you will not need this SPA Technique Electrical Firing Head Re-Arm. Please do not intentionally discharge your electrically controlled SPA Technique fire bottle to make it lighter to ship. If you do you, will have to add this item to the SPA Electrical AFFF Electrical Bottle Refill and Certify.