
AiM Sports
AiM Sports SmartyCam 3 Dual Data Logger Camera
$3,000.00
AiM Sports SmartyCam 3 Dual Data Logger Camera
The SmartyCam 3 Dual is a true dual lens HD motorsports camera and data logger designed for the rigors of competition. Taking the best features of the SmartyCam 2.1 and 2.2 GPHD, the SmartyCam 3 Dual brings two full HD images from independant cameras in H.264 1920x1080 pixels at a clear 60 fps.
AiM Sports SmartyCam 3 Dual Data Logger Camera Details:
Manufacturer: AiM
Manufacturer part number 67 : XS3DB6767L2L200
Manufacturer part number 84 : XS3DB8484L2L200
Manufacturer part number: 120 : XS3DB120120L2L200
Video format: H.264 1,920x1,080 pixels @ 60 fps
Display resolution: 2.4" 240 x 320 pixels
Lens: Low distortion camera lens
CMOS Sensor: Global shutter
Field of view: 67 , 84 or 120
Internal battery: Rechargeable lithium battery
Video Out: 3G-SDI
External power: 9-15 V
Supported MicroSD Card (not included): Up to 2TB
Usage temperatures: -10 C/+50 C
Auto Power On/Off: Yes
Auto Start/Stop Recording: Yes
Body: Anodized Aluminum
Dimensions: Main unit 154.4 x 109.6 x 42 mm
Dimensions: Bullet camera 24 diam x 48.2 mm
Connectors: Deutsch 22 pin (1), SMA SDI Video out (1), SMA bullet connection (2), USB-C (1)
Bullet camera cable length: 2M
Weight: Main unit 800 g
Weight: Bullet camera each 45 g
Waterproof: IP65
Dual Motorsports CamerasThe SmartyCam 3 Dual features two separate bullet cameras that are easily placed anywhere in the cockpit with the included 2M (6.5' foot) SMA cables. SMA cables are small, shielded, and feature threaded connections on each end for the best in video data in the harshest of race conditions.
Video Streaming OutputSmartyCam 3 Dual features a video streaming output channel with SDI interface. Your 3G-SDI format video and audio stream is now able to be sent to a data streamer at your choice of 30 or 60 fps. Live data streaming has never been easier. RaceStudio 3 with AnalysisThe AiM Race Studio 3 software is included to allow you to customize and configure your overlays in a virtually infinite variety of ways. You can easily add your team logo, sponsor information, track map or graphic objects from a list of pre-determined sets with the same layout or single objects from different sets, This could even be adding your second camera video in Picture in Picture mode with your team logo and track map showing.. AiM RaceStudio 3 is powerful and fully customizable for your team and sponsor needs.Video Analysis Post RaceThe entire video session is then downloaded on your PC and then split easily. Replay of individual videos of separate laps can now be simultaneously viewed to identify best race line and lowest lap time. Share and Compare is now available for you to compare your best lap with your friends personal best. AiM Race Studio 3 makes lower lap times easy.Internal Datalogger Built-inThe SmartyCam 3 Dual has a second ECU CAN interface allowing for CAN expansions without the need for an ECU bridge. Both your video and CAN data is stored on a standard removable SD card with capacity of up to 2TB with all data stored in MP4 file format. At the end of your test, your SD Card contains all the information you need for a deep data analysis and lower lap times. SD card is sold separately.Designed for the extremeThe SmartyCam 3 Dual is a true motorsports camera protected by a solid aluminum housing with a hard anodized finish. Built for the rigors of racing with an IP65 waterproof rating, the SmartyCam 3 Dual is at home in your Porsche GT3 Cup, Super Trofeo, TA2 Camaro, F4, or 125cc Shifter Kart. Whatever you drive, Trust the AiM SmartyCam 3 Dual to get you great video and data.Automatic Start & StopEasy integration and automation with your AiM family of data components. The SmartyCam 3 Dual can be set up to automatically power on, start recording, stop recording, lock your data and video file and power down. Focus on your competition, not your proven data system.No "Wave Effect" with Global Shutter CMOSSolid motor mounts, straight cut gearboxes, and hi revving race engines affect most wave type shutter systems. If you have ever seen a video that gets “wavy” at high RPM’s, you are seeing the limits of wave shutters. SmartyCam 3 Dual uses the solid CMOS Global Shutter to provide quality, crisp, clear videos in the most aggressive of race cars.High Quality Video in a Small Video File SizeOptimized video compression in H.264 allows a more compact video size for a perfect balance of file size and video quality. Full HD is accomplished without the massive file size normally required using this compression. Championship World Racing League, SRO, and ChampCar teams swap video cards at every practice, qualifying and race pit stop. This data is only readable after it is uploaded, so the H.264 allows for a faster data download of your driver and vehicle’s performance and vehicle health.

AiM Sports
AiM SW4 Steering Wheel
from $3,000.00
AiM - The New Steering Wheel
SW4 is one of the most versatile steering wheels in the market,compatible with a long list of ECU protocols, to meet any driver’s need.
Choose your size
Compatible with more than 2,000 ECU protocolsSW4 is one of the most versatile steering wheels in the market, with a long list of compatible ECU protocols, to meet any driver’s need.
Freely configurable pagesThe high contrast TFT display offers a wide range of possible graphic data layouts,showing the driver all the information he needs in real time.
Individually configurable pushbuttons!8 completely configurable buttons and 2 additional free contact normally open buttons.Rotary switchesSW4 has 3 completely configurable rotary switches.One by one configurable LEDs, Shift lights can be configured for each gear, choosing LED color and RPM threshold values which will turn it on/off.The 4 Alarms LEDs are configurable too.
Clutch and Paddle shifts (optional)SW4 can be upgraded adding paddle shifts and clutch shifts.

AiM Sports
AiM Sports MXG 1.2 Large Color TFT Dash and Data Logger
from $2,899.00
AiM MXG 1.2 Large Color TFT 7" Dash & Data Logger
The AiM MXG 1.2 data-logging dash represents a huge leap forward in racing display flexibility. The brilliant 800x480 pixel, 7.0" color TFT display frees you from the constraints of a single, factory-designed dash display. The MXG shows you the data you want, the way you want in brilliant, high-contrast color.
The MXG 1.2 is a large, brilliant dashlogger designed to acquire and display data coming from your ECU, an internal accelerometer and gyro, the included GPS08 Module, analog/digital inputs and pre-defined math channels. Performance data acquired can be expanded by adding up to eight expansion modules (sold separately). The large 7" high-color display makes it perfect for installation in wider cockpits (like in touring and GT cars).
CONFIGURABLE PAGES
You can define all the custom pages you wish, choosing from a large library of page styles and colors, defining which data you want to see and where (including end of scale and units of measure). Swapping between pages is as easy as pushing one or two buttons!
INPUT/OUTPUT FLEXIBILITY
Eight fully configurable analog input channels can sample, log, and display a wide range of temperatures, pressures, and potentiometers (throttle position, steering wheel position, etc). CAN Inputs allow you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (Part No. MC-329, sold separately). These hubs let you connect other inputs such as Lambda Controller (O2), SmartyCam, or even channel expansion hubs, without using any analog channels. A separate CAN Output allows you to send messages to the existing CAN network, adding to the vehicle system control possibilities!
The MXG 1.2 can also be connected to many different ECUs to log data gathered by each ECU. An internal three-axis accelerometer, gyroscope, and magnetometer; GPS08 input; four wheel-speed channels; lap time receiver input; and two digital outputs add up to a flexible, expandable data logger that can grow with you. It even has a screw-in port to add analog cameras used for back-up or rear view in visibility-challenged race cars!
ALARMS & SHIFT LIGHTS
Flexible alarms on the MXG 1.2 include six configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities.
The integrated shift light array features a host of advanced multicoloured RGB shift light patterns that can be customized as you like, including RPM max for each individual gear.
DIGITAL OUTPUTS
The MXG 1.2 features two digital outputs (low-side type, switch to ground) that can be configured to activate/deactivate external systems (switch on/off additionallights, cooling fan relays, fluid circulation pumps, etc.) based on those inputs.
MEMORY & WIFI CONNECTIVITY
The 4GB non-volatile memory can store hours of information for detailed analysis using AiM's latest Race Studio 3 software. A secure 802.11 WiFi connection makes it even more convenient to configure, calibrate, and download your data wirelessly! No more need to move your PC close to the vehicle, you can do it from your trailer or tow vehicle up to 60 yards away.
FEATURES & SPECS:
9.3" x 5.0" x 1.0" Anodized Aluminum housing
Large 7.0" high-contrast color TFT display
800x480 pixel screen resolution
Internal 4GB memory
Two Motorsports and one Binder connector
Weight 2.1 lbs (950g)
Waterproof IP65
KIT INCLUDES:
MXG 1.2 data logging dash
GPS08 Module with cable
USB cable
wiring harness with 37 pin Deutsch connector
installation CD with Race Studio 3 software
All other sensors and modules sold separately.

AiM Sports
AiM Power Distribution Module PDM32 Kit w/ 10" Display - Road Icons
$2,800.00
AiM Power Distribution Module PDM32 Kit w/ 10" Display - Road Icons
The AiM PDM32 Power Distribution Module is designed to distribute power to multiple circuits on your vehicle, replacing traditional fuse & relay systems.
AiM Power Distribution Module PDM32 Kit w/ 10" Display - Road Icons Details:
Manufacturer: AiM Sports
Manufacturer Part Number: XC1PDM32D10-C2
Includes 10" Display w/ Road Icons: Yes
Includes Choice of GPS Module: Yes
28 high side outputs
4 Half Bridge Outputs
Replaces traditional fuse & relay systems
Alternate ID: MC-510
AiM PDMs are housed in an anodized billet aluminum case are designed specifically for the rigors of motorsport, and include a complete professional data logger & internal dash controller.
Using an AiM PDM at the center of vehicle electronics greatly simplifies your wiring harness and electronics installation while providing much more control.
AiM's PDM32 also offers some interesting features that you wouldn't necessarily expect to see in a traditional distribution module, such as:
ECU connection for logging data, eliminating the need to add another data logging unit to your car
GPS module compatibility for lap timing (GPS module sold separately)
Dash controller for managing the 6" or 10" PDM dash displays (displays available separately)
9-axis EMU platform
Mirror camera control for adding a reverse camera to the PDM dash display (camera & display available separately)
The PDM32 offers 4 different power output levels:
4 rated up to 20 A (high power)
12 rated up to 15 A (mid power)
12 rated up to 10 A (low power)
4 rated up to 35 A (Half Bridge)
Protected for over voltage, under voltage, over current, & over temperature
Total max current: 120 A
Each output provides status feedback for open circuit, short circuit, high temperature, over current, under voltage, & over voltage. Inrush current, number of fault retries, & time between retries are all definable.
All the outputs may be configurable as PWM and allow soft start/stop.
For every output, a multicolor LED shows the status:
Enabled/disabled
Activated or not
Fault
An elegant visual interface allows flexible and powerful configuration for every power output.
Some "black boxes" are available for simplifying the configuration.
For example, the Wiper may be managed by the LIN connection or using the Half Bridges.
The AiM PDM32 features the following input channels:
Analog/Digital: 8
Only Digital: 4
Speed: 2
If configured as Analog inputs, it is possible to activate an internal 2K Ohm resistor for connecting most of the sensors directly.
If configured as Digital inputs, it is possible to activate a 10K Ohm Pull Up or a 10K Ohm Pull Down.
The PDM32 supports the new 6" & 10" TFT displays, fully configurable with Race Studio 3. It also features two analog camera inputs that allow you to swap your display into a mirror camera with the press of a button or through configurable event logic- reverse gear being the most common option.
The PDM32 receives, uses, & records data from:
ECU- more than 1,000 protocols available
Digital/Analog inputs
Internal 9-axis EMU
GPS- position & lap time
Expansions
Push buttons, from RIO02 module or from any commercial CAN keypad, than to simple configurability of CAN protocols
All the currents & status of all the power outputs
Other user-defined math channels
AiM PDMs come with 4,000 tracks in their database and automatically select the one you are driving on, in order to calculate Lap Time when you pass the start/finish line.
An internal datalogger is available, capable of recording all the analog inputs, digital inputs, ECU channels, GPS values, currents, & status of all the power outputs.

AiM Sports
AiM Power Distribution Module PDM32 Kit w/ 10" Display - No Icons (Race Version)
$2,800.00
AiM Power Distribution Module PDM32 Kit w/ 10" Display - Race Icons
The AiM PDM32 Power Distribution Module is designed to distribute power to multiple circuits on your vehicle, replacing traditional fuse & relay systems.
AiM Power Distribution Module PDM32 Kit w/ 10" Display - Race Icons Details:
Manufacturer: AiM Sports
Manufacturer Part Number: XC1PDM32D10-C2NI
Includes 10" Display w/ No Icons: Yes
Includes Choice of GPS Module: Yes
28 high side outputs
4 Half Bridge Outputs
Replaces traditional fuse & relay systems
AiM PDMs are housed in an anodized billet aluminum case are designed specifically for the rigors of motorsport, and include a complete professional data logger & internal dash controller.
Using an AiM PDM at the center of vehicle electronics greatly simplifies your wiring harness and electronics installation while providing much more control.
AiM's PDM32 also offers some interesting features that you wouldn't necessarily expect to see in a traditional distribution module, such as:
ECU connection for logging data, eliminating the need to add another data logging unit to your car
GPS module compatibility for lap timing (GPS module sold separately)
Dash controller for managing the 6" or 10" PDM dash displays (displays available separately)
9-axis EMU platform
Mirror camera control for adding a reverse camera to the PDM dash display (camera & display available separately)
The PDM32 offers 4 different power output levels:
4 rated up to 20 A (high power)
12 rated up to 15 A (mid power)
12 rated up to 10 A (low power)
4 rated up to 35 A (Half Bridge)
Protected for over voltage, under voltage, over current, & over temperature
Total max current: 120 A
Each output provides status feedback for open circuit, short circuit, high temperature, over current, under voltage, & over voltage. Inrush current, number of fault retries, & time between retries are all definable.
All the outputs may be configurable as PWM and allow soft start/stop.
For every output, a multicolor LED shows the status:
Enabled/disabled
Activated or not
Fault
An elegant visual interface allows flexible and powerful configuration for every power output.
Some "black boxes" are available for simplifying the configuration.
For example, the Wiper may be managed by the LIN connection or using the Half Bridges.
The AiM PDM32 features the following input channels:
Analog/Digital: 8
Only Digital: 4
Speed: 2
If configured as Analog inputs, it is possible to activate an internal 2K Ohm resistor for connecting most of the sensors directly.
If configured as Digital inputs, it is possible to activate a 10K Ohm Pull Up or a 10K Ohm Pull Down.
The PDM32 supports the new 6" & 10" TFT displays, fully configurable with Race Studio 3. It also features two analog camera inputs that allow you to swap your display into a mirror camera with the press of a button or through configurable event logic- reverse gear being the most common option.
The PDM32 receives, uses, & records data from:
ECU- more than 1,000 protocols available
Digital/Analog inputs
Internal 9-axis EMU
GPS- position & lap time
Expansions
Push buttons, from RIO02 module or from any commercial CAN keypad, than to simple configurability of CAN protocols
All the currents & status of all the power outputs
Other user-defined math channels
AiM PDMs come with 4,000 tracks in their database and automatically select the one you are driving on, in order to calculate Lap Time when you pass the start/finish line.
An internal datalogger is available, capable of recording all the analog inputs, digital inputs, ECU channels, GPS values, currents, & status of all the power outputs.

AiM Sports
AiM Sports MXP Midsize Color TFT Dash and Data Logger
from $2,599.00
AiM MXP 50% Bigger Display Than MXS In Similar-Sized Package
This brilliant dash logger from AiM features a stunning high-contrast color 6" TFT display, an integrated LED shift array, configurable multicolor LED alarms, drag and drop multi page configuration, Wi-Fi and USB connectivity, included GPS08 Module, inertial platform, analog and digital inputs, digital outputs, Motorsport connectors, 4 GB of internal memory, 1,000Hz per channel sampling and support for over 1,000 ECU connections! That all adds up to an incredibly flexible, powerful, and useable information center at your fingertips in your race car.
WIDE RANGE OF DATA SOURCES
The AiM MXP samples data coming from your ECU, the GPS Module, its internal nine-axis inertial platform (accelerometer, gyro and magnetometer), eight fully configurable analog inputs, six digital inputs, predefined math channels and a second CAN. Performance info and data acquired can be expanded by adding up to eight expansion modules.
CONFIGURABLE PAGES
You can define all the custom pages you wish, choosing from a wide library of page styles, defining which data to be shown, their end of scale and units of measure. Swapping between pages is as simple as pushing one or two buttons!
FLEXIBLE ALARMS AND ICONS
The MXP features five configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one (and the flashing frequency), choose to have an accompanying text message, and set alarm priorities. You can also choose the street icons you need from a large list in Race Studio 3 - Icons Management, then set them up any way you prefer. They're all fully configurable, and if that's not enough, you can upload and set-up your own customized icons!
TWIN DIGITAL OUTPUTS
MXP features two digital outputs. They can be configured to respond to the analog or digital inputs to automatically run external systems (e.g. to switch on/off additional lights, activate/de-activate a cooling fan or fluid circulation pumps, etc.)
DUAL CAMERA INPUTS
Two analog camera inputs are available to swap your display into a mirror camera or rear-view camera through either push button command or in response to certain programmable events. Especially useful in a race car with limited visibility/sightlines.
SHIFT LIGHT ARRAY
Choose from a host of advanced multicolored RGB shift light patterns that can be customized as you like, including RPM settings for each individual gear.
WiFi CONNECTIVITY
It's so convenient to configure, calibrate, and download your data wirelessly using a secure 802.11 WiFi connection. No need to move your PC close to the vehicle anymore, you can do it from your trailer or tow vehicle up to 60 yards away.
KEY FEATURES & SPECS:
Midsized 6" high-contrast color TFT display
800x480 pixel screen resolution
7.5" x 4.2" x 1.0" anodized aluminum housing
Three CAN connections
15 configurable RGB LEDs
Weight 1.4 lbs (640g)
4GB internal memory
Waterproof IP65
KIT INCLUDES:
AiM MXP dashlogger
GPS08 Module with cable
USB cable
37-pin Deutsch connector harness
Installation CD with Race Studio 3 software

AiM Sports
AiM Sports MXS 1.2 Compact Color TFT Dash And Data Logger
from $2,599.00
AiM MXS 1.2 Color TFT 5" Dash And Data Logger
Check Out The MX Series User Manual Here
The MXS 1.2, the evolution of MXS, is a beautifully executed compact dash/data logger designed to put data at your fingertips. It can acquire data from your ECU, its internal accelerometer and gyro, the included GPS08 Module, analog/digital inputs and pre-defined math channels. The incredibly sharp, full-color TFT display puts it all front-and-center, in incredible color with a high contrast ratio. It even automatically adjusts its backlight based on ambient light to optimize visibility.
Freely configurable pages let you define all the custom pages you wish, choosing from a wide library of page styles and defining which data to display, their end of scale and units of measure. Swapping between pages is as easy as pushing a button!
GPS08
Thanks to the included GPS08 Module and AiM's Race Studio 3 software, you can immediately get lap times along with all data needed for engine tuning, shaking down car and driver, and for improving and refining driving technique.
A MULTITUDE OF DISPLAYS
The MXS 1.2 displays your RPM scale plus all the data you need (speed, water temp, oil pressure, lap times and much more) in pre-configured pages. Or you can customize pages as you wish, choosing from a wide library of page styles and defining which data to be shown, their end of scale and measure units. Swapping between pages is quite easy using push buttons.
A 4GB non-volatile memory stores hours of information for detailed analysis using AiM's Race Studio 3 software. All data can be downloaded to your computer using a built-in secure Wi-Fi connection (no cable required).
LOTS OF INPUT/OUTPUT FLEXIBILITY
Eight fully configurable analog input channels can sample, log, and display a wide range of temperatures, pressures, and potentiometers (throttle position, steering wheel position, etc). CAN Inputs allow you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (Part No. MC-329, sold separately). These hubs let you connect other inputs such as Lambda Controller (O2), SmartyCam, or even channel expansion hubs, without using any analog channels. A separate CAN Output allows you to send messages to the existing CAN network, adding to the vehicle system control possibilities!
The MXS 1.2 can also be connected to many different ECUs to log data gathered by each ECU. An internal three-axis accelerometer, gyroscope, and magnetometer; GPS08 input; four wheel-speed channels; lap time receiver input; and two digital outputs add up to a flexible, expandable data logger that can grow with you. It even has a screw-in port to add analog cameras used for back-up or rear view in visibility-challenged race cars!
SHIFT LIGHTS & ALARMS
Flexible alarms on the MXS 1.2 include six configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities.
The integrated shift light array features a host of advanced multicoloured RGB shift light patterns that can be customized as you like, including RPM max for each individual gear.
DIGITAL OUTPUTS
The MXS 1.2 features two digital outputs (low-side type, switch to ground) that can be configured to activate/deactivate external systems (switch on/off additional lights, cooling fan relays, fluid circulation pumps, etc.) based on those inputs.
WiFi CONNECTIVITY
A secure 802.11 WiFi connection makes it even more convenient to configure, calibrate, and download your data wirelessly! No need to move your PC close to the vehicle anymore, you can do it from your trailer or tow vehicle up to 60 yards away.
TECHNICAL SPECS:
Compact 6.7" x 3.8" x 0.9" anodized aluminum housing
5" TFT high-contrast color display
Internal 4GB memory
Screen resolution 800x480 pixels
Two Motorsport connectors and one Binder connector
Weight 1.2 lb. (530g)
Waterproof IP65
KIT INCLUDES:
MXS 1.2 Unit
GPS08 Module with cable
USB cable
37-pin standard Deutsch-connector harness
Software installation CD with Race Studio 3 software.
All other sensors and modules sold separately.

AiM Sports
AiM Power Distribution Module PDM32 Kit w/ 6" Display - No Icons (Race Version)
$2,500.00
AiM Power Distribution Module PDM32 Kit w/ 6" Display - No Icons
The AiM PDM32 Power Distribution Module is designed to distribute power to multiple circuits on your vehicle, replacing traditional fuse & relay systems.
AiM Power Distribution Module PDM32 Kit w/ 6" Display - No Icons Details:
Manufacturer: AiM Sports
Manufacturer Part Number: XC1PDM32D06-C2NI
Includes 6" Display w/ No Icons: Yes
Includes Choice of GPS Module: Yes
28 high side outputs
4 Half Bridge Outputs
Replaces traditional fuse & relay systems
AiM PDMs are housed in an anodized billet aluminum case are designed specifically for the rigors of motorsport, and include a complete professional data logger & internal dash controller.
Using an AiM PDM at the center of vehicle electronics greatly simplifies your wiring harness and electronics installation while providing much more control.
AiM's PDM32 also offers some interesting features that you wouldn't necessarily expect to see in a traditional distribution module, such as:
ECU connection for logging data, eliminating the need to add another data logging unit to your car
GPS module compatibility for lap timing (GPS module sold separately)
Dash controller for managing the 6" or 10" PDM dash displays (displays available separately)
9-axis EMU platform
Mirror camera control for adding a reverse camera to the PDM dash display (camera & display available separately)
The PDM32 offers 4 different power output levels:
4 rated up to 20 A (high power)
12 rated up to 15 A (mid power)
12 rated up to 10 A (low power)
4 rated up to 35 A (Half Bridge)
Protected for over voltage, under voltage, over current, & over temperature
Total max current: 120 A
Each output provides status feedback for open circuit, short circuit, high temperature, over current, under voltage, & over voltage. Inrush current, number of fault retries, & time between retries are all definable.
All the outputs may be configurable as PWM and allow soft start/stop.
For every output, a multicolor LED shows the status:
Enabled/disabled
Activated or not
Fault
An elegant visual interface allows flexible and powerful configuration for every power output.
Some "black boxes" are available for simplifying the configuration.
For example, the Wiper may be managed by the LIN connection or using the Half Bridges.
The AiM PDM32 features the following input channels:
Analog/Digital: 8
Only Digital: 4
Speed: 2
If configured as Analog inputs, it is possible to activate an internal 2K Ohm resistor for connecting most of the sensors directly.
If configured as Digital inputs, it is possible to activate a 10K Ohm Pull Up or a 10K Ohm Pull Down.
The PDM32 supports the new 6" & 10" TFT displays, fully configurable with Race Studio 3. It also features two analog camera inputs that allow you to swap your display into a mirror camera with the press of a button or through configurable event logic- reverse gear being the most common option.
The PDM32 receives, uses, & records data from:
ECU- more than 1,000 protocols available
Digital/Analog inputs
Internal 9-axis EMU
GPS- position & lap time
Expansions
Push buttons, from RIO02 module or from any commercial CAN keypad, than to simple configurability of CAN protocols
All the currents & status of all the power outputs
Other user-defined math channels
AiM PDMs come with 4,000 tracks in their database and automatically select the one you are driving on, in order to calculate Lap Time when you pass the start/finish line.
An internal datalogger is available, capable of recording all the analog inputs, digital inputs, ECU channels, GPS values, currents, & status of all the power outputs.

AiM Sports
AiM Power Distribution Module PDM32 Kit w/ 6" Display - Road Icons
$2,500.00
AiM Power Distribution Module PDM32 Kit w/ 6" Display - Road Icons
The AiM PDM32 Power Distribution Module is designed to distribute power to multiple circuits on your vehicle, replacing traditional fuse & relay systems.
AiM Power Distribution Module PDM32 Kit w/ 6" Display - Road Icons Details:
Manufacturer: AiM Sports
Manufacturer Part Number: XC1PDM32D06-C2
Includes 6" Display w/ Road Icons: Yes
Includes Choice of GPS Module: Yes
28 high side outputs
4 Half Bridge Outputs
Replaces traditional fuse & relay systems
AiM PDMs are housed in an anodized billet aluminum case are designed specifically for the rigors of motorsport, and include a complete professional data logger & internal dash controller.
Using an AiM PDM at the center of vehicle electronics greatly simplifies your wiring harness and electronics installation while providing much more control.
AiM's PDM32 also offers some interesting features that you wouldn't necessarily expect to see in a traditional distribution module, such as:
ECU connection for logging data, eliminating the need to add another data logging unit to your car
GPS module compatibility for lap timing (GPS module sold separately)
Dash controller for managing the 6" or 10" PDM dash displays (displays available separately)
9-axis EMU platform
Mirror camera control for adding a reverse camera to the PDM dash display (camera & display available separately)
The PDM32 offers 4 different power output levels:
4 rated up to 20 A (high power)
12 rated up to 15 A (mid power)
12 rated up to 10 A (low power)
4 rated up to 35 A (Half Bridge)
Protected for over voltage, under voltage, over current, & over temperature
Total max current: 120 A
Each output provides status feedback for open circuit, short circuit, high temperature, over current, under voltage, & over voltage. Inrush current, number of fault retries, & time between retries are all definable.
All the outputs may be configurable as PWM and allow soft start/stop.
For every output, a multicolor LED shows the status:
Enabled/disabled
Activated or not
Fault
An elegant visual interface allows flexible and powerful configuration for every power output.
Some "black boxes" are available for simplifying the configuration.
For example, the Wiper may be managed by the LIN connection or using the Half Bridges.
The AiM PDM32 features the following input channels:
Analog/Digital: 8
Only Digital: 4
Speed: 2
If configured as Analog inputs, it is possible to activate an internal 2K Ohm resistor for connecting most of the sensors directly.
If configured as Digital inputs, it is possible to activate a 10K Ohm Pull Up or a 10K Ohm Pull Down.
The PDM32 supports the new 6" & 10" TFT displays, fully configurable with Race Studio 3. It also features two analog camera inputs that allow you to swap your display into a mirror camera with the press of a button or through configurable event logic- reverse gear being the most common option.
The PDM32 receives, uses, & records data from:
ECU- more than 1,000 protocols available
Digital/Analog inputs
Internal 9-axis EMU
GPS- position & lap time
Expansions
Push buttons, from RIO02 module or from any commercial CAN keypad, than to simple configurability of CAN protocols
All the currents & status of all the power outputs
Other user-defined math channels
AiM PDMs come with 4,000 tracks in their database and automatically select the one you are driving on, in order to calculate Lap Time when you pass the start/finish line.
An internal datalogger is available, capable of recording all the analog inputs, digital inputs, ECU channels, GPS values, currents, & status of all the power outputs.

AiM Sports
Aim MX2E Plug & Play Dash Logger Kit For Lotus Elise / Exige
$2,000.00
Aim MX2E Plug & Play Dash Logger Kit For Lotus Elise / Exige
Aim MX2E Plug & Play dash logger and cluster upgrade kit are specifically designed for Lotus Elise/Exige. If you are installing this kit in a 2008+ then this will directly connect to your factory harness. If using this in a 2004-2007 Lotus Elise / Exige you will need an adapter harness for the older chassis.
Aim MX2E Plug & Play Dash Logger Kit For Lotus Elise / Exige Details:
Manufacturer: AiM Technologies
Manufacturer Part Number: XA6MXPLEE0
Fully replaces factory gauge cluster: Yes
Includes Cluster Hood: Yes
Includes AiM GPS antenna: Yes
Expandable input channels: Yes
The display can function as a rearview camera: Yes
Wi-Fi connectivity: Yes
Need adapter cable for 2008+: No
Need adapter cable for 2004-2007: Yes

AiM Sports
AiM GS-Dash and EVO 4S Data Logger Dash Display w/GPS
$1,599.00
AiM GS-Dash and EVO 4S Data Logger Dash Display w/ GPS
The Aim GS-DASH and EVO 4s Data Logger and Racing Dash Display Kit has been designed to show data sampled by the new generation of Aim data logger, the EVO 4S. All data coming from your vehicle’s ECU, from the accelerometers, from the GPS module as well as from your custom sensors.
Easy and immediate readability
In its compact structure, Aim GS-DASH & EVO 4s Truck Racing Data Logger Kit features a wide 268x128 pixel display to offer the best readability. The screen can be backlighted in one of the seven available colors and the incorporated light sensor makes brightness and contrast ideal in all light conditions.
Up to 9 pages showing the data you need
In its compact structure, GS-Dash features a wide 268x128 pixel display to maximise readability. The screen can be backlighted in one of the seven available colors and the incorporated light sensor makes brightness and contrast ideal in all light conditions.
Lap times
You can see your truck rolling time, static or predictive lap times (as an absolute value or as a difference vs. the Best Lap).
Recall your session highlights
A key-data summary is available at the end of each session where you can also see a list of all the laps of the sessions, with their times, min/max speed and min/max RPM's.
Configure your LED’s One by One
Five RGB shift lights can be configured for each gear, choosing LED color and RPM threshold values which will turn it on/off.
Alarms are managed in a very flexible way: you can choose the situation that generates the alarm, the LED behavior (blinking frequency and color) when the alarm appears and the conditions for its switch-off. A warning message can also be shown.
Easy Configuration
Configuration of Shift lights, alarms and customized data pages is intuitive and immediate using the dedicated Race Studio 3 software.
Shift Lights and Alarms are to be configured using Race Studio 3 configuration panel (see image on the left).
Data is viewed in customisable pages. With few clicks you can enable up to eight Custom Pages: you decide where to show the desired variables (up to 4 on each page) from those sampled by the ECU, the accelerometers and the GPS values from EVO4S/EVO5. Configuration can be done either using Race Studio 3 (see panel on the left) or via keyboard (see below).
Compact and resistant chassis
Its small dimension makes it particularly suitable for small cockpit installation (i.e. bikes, formula cars). Manufactured in aluminum with edge-to-edge glass and metallic pushbuttons the GS-Dash is robust and fully waterproof.

AiM Sports
AiM Sports MXG 1.2 Strada Large Color TFT Dash
$1,599.00
The Full-Size Color TFT Dash For Road Use
MXG 1.2 Strada ("street" in Italian) is a beautifully-designed, feature-rich color digital dash display. It is basically the MXG 1.2 without the datalogging function. The MXG 1.2 Strada features a wide 7" High Contrast TFT color screen with great visual impact, configurable to show lap times, RPM, and a huge range of info coming from your Engine Control Unit, analog/digital inputs, pre-defined math channels and an optional GPS08 Module. Programmable multicolor shift and alarm LEDs round out an incredibly powerful package.
The MXG 1.2 Strada displays your RPM, selected gear, speed, plus all the data you choose (water temp, oil pressure, trans temp, lap times and much more) in either pre-configured or user-customized pages. Swapping between pages is as easy as pushing buttons. Plus the MXG 1.2 Strada puts a huge amount of control over your car's systems at your fingertips. There's even a version with "Street Icon" LEDs instead of the traditional "plain" LEDs!
INPUT & OUTPUT FLEXIBILITY
Eight fully configurable analog input channels can sample, log, and display a wide range of temperatures, pressures, and potentiometers (throttle position, steering wheel position, etc). Available only in a CAN/RS232 version for the maximum level of customization and data access.
The CAN input allows you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (Part No. MC-329, sold separately). These hubs let you connect other inputs such as Lambda Controller (O2), SmartyCam, or even channel expansion hubs, without using any analog channels. A separate CAN output allows you to send messages to your car's existing CAN network, adding to the vehicle system control possibilities!
ALARMS & SHIFT LIGHTS
The ten multicolored RGB shift lights can be customized to define the max RPM for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them to turn on/off depending on analog or digital inputs, ECU values, expansion values, math channels or GPS information (with the optional GPS08). You choose conditions, colors, and select a solid alarm or flashing one (including flash frequency). It's also possible to configure an accompanying text message.
DIGITAL OUTPUT
The MXG 1.2 Strada features a low-side (switch to ground) digital output that can be configured to activate/deactivate external systems (switch on/off additionallights, cooling fan relays, fluid circulation pumps, etc.) based on those inputs.
RACE STUDIO 3
MXG 1.2 Strada is configured using your PC and Race Studio 3. You can create, customize, delete, import and export configurations with all channels, ECU drivers, Math Channels, Display Pages, Digital Output, Alarms, Shift Lights and all the expansions you need.
TECHNICAL SPECS:
9.3" x 5.0" x 1.0" Anodized Aluminum housing
Large 7.0" high-contrast color TFT display
800x480 pixel screen resolution
Weight 2.1 lbs (950g)
Waterproof IP65
KIT INCLUDES:
MXG 1.2 Strada digital dash
USB cable
14-pin standard wiring
23-pin connector + contacts
Installation CD with Race Studio 3 software
All sensors and modules sold separately.

AiM Sports
Aim SmartyCam 3 Corsa
$1,399.00
AiM Sports SmartyCam 3 Corsa
Introducing the upgraded SmartyCam 3 Corsa, the newest iteration of the SmartyCam HD. This enhanced version takes the well-known design to new heights, featuring an improved Global Shutter and the ability to capture video at up to 60 frames per second. Unlike conventional action cameras that cater to various extreme activities like skydiving or riding monstrous waves, the SmartyCam HD is meticulously crafted by dedicated motorsports enthusiasts who live and breathe the racetrack. Its narrow angle lens is specifically tailored for seamless mounting in sedans and sports cars, neatly fitting within the A-pillars for optimal placement.
Video format
H.264 1,920x1,080 pixels @ 60 fps
Display resolution
128x128 pixels
Lens
Low distortion camera lens
CMOS Sensor
Global shutter
Field of view
67° or 84°
Internal battery
Rechargeable lithium battery
External power
9-15 V
Supported MicroSD Card (not included)
Up to 2 TB
Connectors
3 Binder 712 female connectors + 1 USB-C
Usage temperatures
-10°C/+50°C
Auto Power ON
Yes
Auto Power OFF
Yes
Auto Start/Stop Recording
Yes
Body
Coated aluminum
Dimensions
102.2 x 63 x 46.5 mm
Weight
280 g, battery included
Waterproof
IP65

AiM Sports
AiM Sports SmartyCam 3 Corsa Data Logger Camera DRAFT
$1,399.00
AiM Sports SmartyCam 3 Corsa Data Logger Camera
The new AiM SmartyCam 3 Corsa in both 67° and 84° takes everything we loved from the proven AiM SmartyCam 2.1 and upgrades the video to 1920x1080 FHD with 60 frames per second utilizing H.264 MPEG-4 protocol with 2TB of SD card capacity.
AiM SmartyCam 3 Corsa Video Camera with Data Overlay Details:
Manufacturer: AiM
Manufacturer part number 67°: XS3CRFHD067L201
Manufacturer part number 84°: XS3CRFHD084L201
Cable included length: 4M
Cable included end #1: 5 pin 712 male
Cable included end #2: 5 pin 712 male
Cable connections on camera: 5 pin 712 female
Weight: 200g
Internal Battery: Yes
External power input: 9-15 VDC
Operating temperature: 14°F to 122°F
SD card capacity: 2TB
Audio: Internal microphone inside the camera housing
Built-In ECU Bridge:The AiM SmartyCam engineers loaded the AiM SmartyCam 3 Corsa with features racers have requested for years, like a built-in ECU bridge. If you have a factory race car, BMW M4 GT4, Porsche Clubsport, GT3 Cup or Aston Martin Vantage GT4, you can now use your AiM SmartyCam Corsa stand alone and piggyback your ECU inputs. No external modules or additional wiring needed. Simple, non-invasive perfection.Automatic On/OffAiM SmartyCam 3 Corsa can be switched on/off automatically by the dash/logger it is connected to: simply decide after what period of non-activity the camera will have to switch-off. Both operations can also be carried out using the front facing buttons also, if you prefer.Recording can also be started/stopped automatically or via keyboard: the camera will start recording when the speed or RPM threshold is exceeded. You simply decide how long after dropping below the selected threshold the video will automatically stop.
Straight Cut Dog Box/Solid Motor Mounts/Engine HarmonicsEngine rumble causes vibrations, which are not a good thing for video recording. Never again will you experience that seasick "wave effect" you get when watching videos recorded by a generic camera, when the car rolls at 7000 RPM. AiM SmartyCam 3 Corsa has been designed for that environment and for those vibrations. "Wave effect" is just a memory.Generic action cameras are designed to record videos in many different situations, such as skiing or surfing, but in motorsports they tend to record misleading videos. Those cameras straighten out the view ahead: when on track, the corners simply disappear. So, when you wish to check your track performance, those videos are useless, because the images are distorted. Being a camera dedicated to motorsports, AiM SmartyCam 3 Corsa features lenses specifically designed to avoid distortion. The camera is available in two versions: 67 ° & 84 °
Real Time Data OverlayWith no driver input, the AiM SmartyCam 3 Corsa will automatically overlay on your videos all the data you need: speed, RPM, lap number, gear shifts and much more. Simply choose the data and the graphic layout you prefer in the huge selection of overlays available.
What Kind of Data?AiM SmartyCam 3 Corsa overlays data from different sources on the videos themselves.From GPS: track map and vehicle position, as well as speed, lap and split times.From Aim logger connected to your ECU: RPM, throttle, engaged gear, acceleration, temperatures, pressures and in the presence of additional sensors, also their values.All this info will be overlayed on videos in each single point of the track.
Smarty Manager 3 SoftwareWith SmartyManager 3, AiM SmartyCam 3 Corsa dedicated software, you can add your logo and the track map on videos. The wide choice of graphic objects you can select allows you to choose from a list of pre-determined sets with the same layout or to choose single objects from different sets. Now, your videos will be truly “yours” in all details, from data to their graphic layouts.

AiM Sports
Aim SmartyCam 3 GP
$1,299.00
AiM Sports SmartyCam 3 GP
The all-NEW SmartyCam 3 GP camera has been designed for motorsport with a single purpose:To provide great videos and supply you with all the information you need.SmartyCam 3 GP camera overlays all the data from both GPS and AiM loggers connected to your ECU. Full HD camera system, Video output, CAN connection, USB-C connection, and GPS port are only a few of the features of SmartyCam 3 GP: the power of simplicity.
Video format: H.264 1920x1080 pixels @ 60 FPS
Display resolution: 2.4" 240 x 320 pixels
Lens: Low distortion camera lens
CMOS sensor: Global Shutter
Field of view: 67°, 84° or 120°
Internal battery: Rechargeable lithium battery
Video Out: 3G-SDI
External power: 9-15 Volt
Supports SD card: Up to 2 TB
Connectors: 2 Binder 712 female connectors + 2 SMA female connector (see pinout page) + 1 USB-C
Usage temperatures: -10°C/+50°C
Auto Power ON: Yes
Auto Power OFF: Yes
Auto Start/Stop Recording: Yes
Body: Anodised Aluminium
Dimensions: Main unit 120.8 x 80.2 x 30.9 mm | Bullet camera 24 diam x 46.0 mm (120° lens) | Bullet camera 24 diam x 41.0 mm (67°-84° lens
Bullet Cable Length: From 0.5 m to 4 m (7 lengths available)
Weight: Main Body - 320g, Bullet Camera - 45g
Waterproof: IP65