Roll Bars

CMS Performance Clubsport Roll Bar For Porsche 991 GT3 & GT3RS This Roll Bar Fits The Following Cars: Porsche GT3, 991.1 and 991.2 (2014-2019) Porsche GT3RS, 991.1 and 991.2 (2016-2019) PENULTIMATE ROLL BAR FOR YOUR PORSCHE GT3 and GT3RS The CMS Performance Clubsport Roll Bar is a new variant of our incredibly popular GT3/GT3RS roll bar. Re-designed with steel gusseting and high-strength support tubing is added to the top and bottom of the X-brace and to all four corners, the CMS Performance Clubsport Roll Bar takes rigidity and strength to another level. This is the strongest, highest quality bolt-in roll bar on the market for the Porsche 991 GT3 and GT3RS, period. In designing and building the CMS Performance Clubsport roll bar, structural rigidity and impact protection were our primary goals. This roll bar is fully 360o TIG welded, the main tubing is 1.75" Docol R8 Advanced High-Strength Steel. CMS is the only roll bar manufacturer to employ this modern material. The support tubing is Docol R8 as well, and the gussets are machined from steel plate. CMS Performance tailors the GT3/GT3RS Clubsport roll bar to take full advantage of the strongest chassis mounting points in the Porsche 991 GT3/GT3RS . The main roll hoop is X-braced and gusseted, with a single tube cross-bar providing lateral strength that's also used for mounting racing harness shoulder straps. ATTENTION TO DETAIL IS THE HALLMARK OF CMS PERFORMANCE The cross-bar on the CMS Performance Clubsport Roll Bar for the Porsche 991 GT3 and GT3RS lets you attach your racing harness shoulder straps at the proper angle (0° to -20° front-to-back) and distance relative to the driver and passenger, regardless of seat position. The CMS Performance Clubsport Roll Bar was designed to leave your rear view unobstructed by additional bracing that other roll bars require due to the use of inferior materials. CMS Performance also features a unique three-piece rear kicker that bolts to the Porsche 991 GT3/GT3RS rear shock towers (where the factory GT3 Cup Car roll cage mounts). These are the strongest rear mounting points, and also add rigidity to the chassis for more precise handling. This kicker design is incredibly strong while also being a breeze to install (typical one-piece designs can be a nightmare to install). The main roll hoop is mounted to your Porsche's steel frame structure beneath the vehicle just like the factory Cup Car cage. BUILT LIKE A TANK, FINISHED LIKE A PORSCHE Designed using the same guidelines as a full racing roll cage and fully 360o TIG welded by our chassis fabricators and master welders, the CMS Performance Clubsport Roll Bar for the Porsche 991 GT3 and GT3RS is unsurpassed in quality, durability, and structural integrity. Each roll bar is professionally powder-coated in-house to guarantee fit and finish no other manufacturer can match. This also lets us use powder coat colors we've matched to Porsche GT3 and GT3RS OEM paint colors for a truly customized aesthetic. We also offer custom technical powder coat finishes like the amazing Superchrome! Or you can choose our rich satin black powder coat for a more low-key installation. Powder coating any color you choose is included in the price of your CMS Performance roll bar. DEMAND THE BEST FOR YOUR GT3 OR GT3RS Thoughtful engineering and design, superior materials, masterful fabrication, and beautifully customized finishing. That's the CMS Performance way of doing things. Backed by our legendary customer service, it all adds up to this: you can pay more for a roll bar, but you can only get the best from CMS. ADD PREMIUM RACING HARNESSES TO YOUR PORSCHE Add six-point Schroth Enduro 2x2 GT3, Schroth Flexi 2x2 GT3, or Sabelt Silver Series GT3 racing harness to your order and save! These harnesses are specifically designed for the Porsche 992 GT3 and GT3RS and will bolt to your factory lightweight carbon bucket seats. Or you can add four-point Schroth Profi II ASM GT3 or Sabelt Porsche GT3 4 Point harnesses, ideal for the Porsche 992 GT3 and GT3RS passenger seat that doesn't have a factory sub-strap pass through. With six-point harnesses, we strongly recommend using the CMS Performance Sub Strap Mount to provide a solid, properly located anchor for your anti-submarine straps. The CMS Performance Sub Strap Mount is simple to install at the same time you're installing your roll bar! Click Here for Installation Instructions EASY INSTALLATION TAKES THE HEADACHE OUT OF ROLL BARS We've been through more than a few wrestling matches installing bolt-in roll bars in street cars. Fortunately, we used that experience to design the CMS Performance Roll Bar for the Porsche 992 GT3 and GT3RS to be a lot less frustrating to install. We hesitate to go so far as to say it's easy, but we'll say it isn't hard if you have a friend and some basic tools. CMS PERFORMANCE PORSCHE CLUBSPORT ROLL BAR DETAILS: Manufacturer: CMS Performance Manufacturer Part: CPRB-991CS Materials: Docol R8 Advanced High-Strength Steel; steel plate gussets. Construction: Full-penetration 360o TIG welded; one-piece gusseted main hoop and three-piece kicker; high-strength double-bolted interlocking roll bar joints and American-made Grade 8 hardware. CNC-cut precision mounting plates Full seat travel with any seat Detailed installation instructions & all necessary hardware for a seamless installation This product is intended for off-road race track use only.

CMS Performance Clubsport Roll Bar For Porsche 992 GT3 & GT3RS This Roll Bar Fits The Following Cars: Porsche GT3, 992 (2022+) Porsche GT3RS, 992 (2023+) THE ULTIMATE NEW ROLL BAR FOR THE PORSCHE 992 GT3 & GT3RS Click Here for Installation Instructions The CMS Performance Clubsport Roll Bar is an exciting new variant of the incredibly popular GT3/GT3RS roll bar. Re-designed with steel gusseting and high-strength support tubing is added to the top and bottom of the X-brace and to all four corners, the CMS Performance Clubsport Roll Bar takes rigidity and strength to another level. This is the strongest, highest quality bolt-in roll bar on the market for the Porsche 992 GT3 and GT3RS, period. In designing and building the CMS Performance Clubsport roll bar, structural rigidity and impact protection were the primary goals. This roll bar is fully 360o TIG welded, the main tubing is 1.75" Docol R8 Advanced High-Strength Steel. CMS Performance is the only roll bar manufacturer to employ this modern material. The support tubing is Docol R8 as well, and the gussets are machined from steel plate. CMS Performance tailors the GT3/GT3RS Clubsport roll bar to take full advantage of the strongest chassis mounting points in the Porsche 992 GT3/GT3RS. The main roll hoop is X-braced and gusseted, with a single tube cross-bar providing lateral strength that's also used for mounting racing harness shoulder straps. ATTENTION TO DETAIL IS THE HALLMARK OF CMS PERFORMANCE The cross-bar on the CMS Performance Clubsport Roll Bar for the Porsche 992 GT3 and GT3RS lets you attach your racing harness shoulder straps at the proper angle (0° to -20° front-to-back) and distance relative to the driver and passenger, regardless of seat position. The CMS Performance Clubsport Roll Bar was designed to leave your rear view unobstructed by additional bracing that other roll bars require due to the use of inferior materials. CMS Performance also features a unique three-piece rear kicker that bolts to the Porsche 992 GT3/GT3RS rear shock towers (where the factory GT3 Cup Car roll cage mounts). These are the strongest rear mounting points, and also add rigidity to the chassis for more precise handling. This kicker design is incredibly strong while also being a breeze to install (typical one-piece designs can be a nightmare to install). The main roll hoop is mounted to your Porsche's steel frame structure beneath the vehicle just like the factory Cup Car cage. BUILT LIKE A TANK, FINISHED LIKE A PORSCHE Designed using the same guidelines as a full racing roll cage and fully 360o TIG welded by our chassis fabricators and master welders, the CMS Performance Clubsport Roll Bar for the Porsche 992 GT3 and GT3RS is unsurpassed in quality, durability, and structural integrity. Each roll bar is professionally powder-coated in-house to guarantee fit and finish no other manufacturer can match. This also lets us use powder coat colors we've matched to Porsche GT3 and GT3RS OEM paint colors for a truly customized aesthetic. We also offer custom technical powder coat finishes like the amazing Superchrome! Or you can choose our rich satin black powder coat for a more low-key installation. Powder coating any color you choose is included in the price of your CMS Performance roll bar. DON'T SETTLE FOR ANYTHING BUT THE VERY BEST Thoughtful engineering and design, superior materials, masterful fabrication, and beautifully customized finishing. That's the CMS Performance way of doing things. Backed by our legendary customer service, it all adds up to this: you can pay more for a roll bar, but you can only get the best from CMS. ADD PREMIUM RACING HARNESSES TO YOUR PORSCHE Add six-point Schroth Enduro 2x2 GT3, Schroth Flexi 2x2 GT3, or Sabelt Silver Series GT3 racing harness to your order and save! These harnesses are specifically designed for the Porsche 992 GT3 and GT3RS and will bolt to your factory lightweight carbon bucket seats. Or you can add four-point Schroth Profi II ASM GT3 or Sabelt Porsche GT3 4 Point harnesses, ideal for the Porsche 992 GT3 and GT3RS passenger seat that doesn't have a factory sub-strap pass through. With six-point harnesses, we strongly recommend using the CMS Performance Sub Strap Mount to provide a solid, properly located anchor for your anti-submarine straps. The CMS Performance Sub Strap Mount is simple to install at the same time you're installing your roll bar! STRAIGHTFORWARD INSTALLATION TAKES THE HEADACHE OUT OF A ROLL BAR We've been through more than a few wrestling matches installing bolt-in roll bars in street cars. Fortunately, we used that experience to design the CMS Performance Roll Bar for the Porsche 992 GT3 and GT3RS to be a lot less frustrating to install. Check out the installation instructions here. We hesitate to go so far as to say it's easy, but we'll say it isn't hard if you have a friend and some basic tools. CMS PERFORMANCE PORSCHE 992 GT3/GT3RS CLUBSPORT ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer Part: CPRB-992CS Materials: Docol R8 Advanced High-Strength Steel; steel plate gussets. Construction: Full-penetration 360o TIG welded; one-piece gusseted main hoop and three-piece kicker; high-strength double-bolted interlocking roll bar joints and American-made Grade 8 hardware. CNC-cut precision mounting plates Full seat travel with any seat Detailed installation instructions & all necessary hardware for a seamless installation This product is intended for off-road race track use only.

CMS Performance Roll Bar For BMW M8 Coupe (F92) This Roll Bar Fits The Following Cars: BMW M8 Coupe only, F92 (2020-2024) Does not fit BMW M8 Convertible (F91) or Sedan (F93) THE ULTIMATE ROLL BAR FOR THE MIGHTY M8 The CMS Performance Roll Bar for the BMW M8 Coupe is a newest addition to their incredibly popular line of custom-designed bolt-in roll bars. Constructed from high-strength Docol R8 tubing, the CMS Performance Roll Bar for the BMW M8 takes safety, rigidity, and strength to another level. This is the strongest, highest quality bolt-in roll bar on the market for the BMW M8, period. In designing and building every CMS Performance roll bar, structural rigidity and impact protection are always their primary goals. That's why every CMS Performance roll bar is fully 360o TIG welded tubing made from 1.75-inch diameter Docol R8 Advanced High-Strength Steel. CMS is the only roll bar manufacturer to employ this modern material. The support tubing is Docol R8 as well, and the mounting surfaces are machined from solid steel plate. CMS Performance tailors the CMS Performance Roll Bar for the BMW M8 Coupe to take full advantage of the strongest chassis mounting points in the M8. The main roll hoop is X-braced with a single tube cross-bar providing lateral strength that's also used for mounting racing harness shoulder straps. ATTENTION TO DETAIL IS THE HALLMARK OF CMS PERFORMANCE The cross-bar on the CMS Performance BMW M8 Roll Bar is designed to let you attach your racing harness shoulder straps at the proper angle (0° to -20° front-to-back) and distance relative to the driver and passenger, regardless of seat position. The CMS Performance Roll Bar takes advantage of our use of high-strength steel to keep your rear view unobstructed by the added bracing other roll bars require due to the use of inferior materials. CMS Performance ties the main roll hoop and rear kickers together to form an extremely rigid cage structure, designed to attach to the strongest available chassis mounting points. This also adds rigidity to the M8 chassis. The rear kickers are a two-piece design using CNC-machined interlocking joints with double fasteners, making them incredibly strong while also being a breeze to install (typical one-piece designs can be a nightmare to install). BUILT LIKE A TANK, FINISHED LIKE A BMW Designed using the same guidelines as a full racing roll cage and fully 360o TIG welded by expert chassis fabricators and master welders, the CMS Performance Roll Bar for the BMW M8 is unsurpassed in quality, durability, and structural integrity. Each roll bar is professionally powder-coated in-house to guarantee fit and finish no other manufacturer can match. This makes it easy for CMS Performance to offer powder coat colors matched to BMW's OEM paint colors for a truly customized aesthetic. Powder coating any color you choose is included in the price of your CMS Performance roll bar. DEMAND THE ABSOLUTE BEST Thoughtful engineering and design, superior materials, masterful fabrication, and beautifully customized finishing. That's the CMS Performance way of doing things. Backed by Discovery Parts legendary customer service, it all adds up to this: you can pay more for a roll bar, but you can only get the best from CMS Performance. ADD PREMIUM RACING HARNESSES TO YOUR BMW You can add four-point racing harnesses from Sparco ,Sabelt, or Schroth. These harnesses are an ideal safety upgrade from traditional three-point seat belts, designed for your BMW M8 seats (which do not have factory slots in the lower seat cushions for six-point harness sub-straps to pass through). Custom Installation Instructions Are Coming Soon! EASY INSTALLATION TAKES THE HEADACHE OUT OF ROLL BARS At Discovery Parts, we've been through more than a few wrestling matches installing bolt-in roll bars in street cars. Fortunately, we found the CMS Performance Roll Bar for the BMW M8 to be a lot less frustrating to install. We hesitate to go so far as to say it's easy, but we'll say it isn't hard if you have a friend and some basic tools. CMS PERFORMANCE BMW M8 ROLL BAR DETAILS: Manufacturer: CMS Performance Manufacturer Part: CPRB-F92 Materials: Docol R8 Advanced High-Strength Steel; steel plate gussets. Construction: Full-penetration 360o TIG welded; one-piece gusseted main hoop and three-piece kicker; high-strength double-bolted interlocking roll bar joints and American-made Grade 8 hardware. CNC-cut precision mounting plates Full seat travel with any seat Detailed installation instructions & all necessary hardware for a seamless installation This product is intended for off-road use only.

CMS Performance Bolt-In Roll Bar For Porsche 718 Cayman GT4RS This Product Fits The Following Cars: Porsche Cayman GT4 RS, 718 (2023+) THE FIRST & BEST ROLL BAR FOR YOUR PORSCHE CAYMAN GT4RS CMS has done it again. The CMS Porsche GT4 RS Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market for Porsche's new Super-Cayman. In designing this roll bar for your GT4 RS, safety and structural rigidity were the primary goals. That's why CMS Performance exclusively uses 1.75 x .095" Docol R8 Advanced High-Strength Steel tubing, which is much stronger than the inferior 4130 CrMo tubing others use. The CMS Performance Roll Bar for the Porsche GT4 RS features a harness cross-bar designed to locate your harness shoulder straps at the proper angle (0° to -20° front-to-rear) and distance to the driver. Yet, due to the innovative CMS Performance design, this Porsche GT4 RS roll bar requires no cutting through the carpeted hump in the middle of your interior (replacing this carpet is expensive if you ever want to return your car to stock). As an added benefit, this also gives you an ideal mounting spot for an HD Racing Video camera. EXCEPTIONAL ATTENTION TO DETAIL WITH ADVANCED MATERIALS Click Here For Roll Bar Installation Instructions CMS Performance is the only roll bar manufacturer using advanced Docol R8 tubing throughout each Porsche Cayman GT4 RS Roll Bar. This allows for a driver's rear view unobstructed by rear diagonal bracing typically used to support weaker chrome-moly or mild steel roll bars. Another benefit of high-strength steel construction is the CMS Performance Roll Bar gives you unfettered access to the engine cover without removing any part of your roll bar. Other roll bars require partial removal to get at your engine -- not ideal in a car that sees a fair amount of track time. The CMS Performance Porsche GT4 RS Roll Bar's rear kickers route over the incredible carbon fiber intakes and engine cover and bolt to your Cayman's rear shock towers. These are the safest, strongest possible mounting points, adding rigidity to the chassis and suspension. The main roll hoop is mounted to the frame structure across the rear bulkhead, keeping it light weight and maitaining its superior strength. CMS PERFORMANCE CUSTOM POWDER COATING IN OEM-MATCHED COLORS CMS Performance powder coats each Porsche GT4 RS roll bar in-house, offering colors custom-matched to Porsche's original GT4 RS paint palette. Or you can go with an exceptionally rich satin black for a stealthy installation. Every CMS Performance Porsche GT4 RS Roll Bar is powder coated to order. PREMIUM QUALITY AND ATTENTION TO DETAIL MADE IN THE USA Designed by race chassis builders and fully 360o TIG welded by master welders using superior materials, CMS Performance is proud to make every Porsche GT4 RS Roll Bar in the USA from start to finish. The superior design, materials, fit, and finish of a CMS Performance roll bar all add up to this: you can spend more on a roll bar, but you only get the best from CMS Performance. ADD RACING HARNESSES TO YOUR PORSCHE GT4RS AND SAVE! Add a six-point Schroth Enduro 2x2 GT4 , Schroth Flexi 2x2 GT4 , or Sabelt Silver Series GT4 harness to your CMS Performance Roll Bar order and save! We also carry the four-point Schroth Profi II ASM GT4 harnesses ideal for the Porsche GT4 RS passenger seat (which does not have a sub-strap pass through cutout). All of these harnesses are specifically designed to bolt up directly to the lightweight carbon bucket seats in your Porsche GT4 RS. If you're installing six-point harnesses in your Porsche, we strongly recommend adding these CMS Performance Sub Strap Mounts to your order. They provide a solid, properly located anchor for your anti-submarine strap and are easy to install. CMS PERFORMANCE PORSCHE 718 GT4RS ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer Part Number: CPRB-GT4RS Materials: Main hoop and kickers 1.75 x .095" Docol R8 Advanced High-Strength Steel Construction: Fully 360o TIG welded one-piece main hoop & three-piece kickers using USA-made interlocking roll cage joints Installation: Comes with detailed installation instructions and all necessary hardware CMS PERFORMANCE ROLL BAR OPTIONS Pre-cut OEM Porsche interior trim for easier installation, preserving your original trim CMS Performance Sub Strap Mount This product is intended for off-road use only.

CMS Performance Bolt-In Roll Bar for Porsche 992 GT3 & GT3RS Roll Bar Fits The Following Cars: 992 Porsche GT3 992 Porsche GT3RS THE BEST ROLL BAR AVAILABLE FOR PORSCHE'S TRACK ANIMAL The CMS Performance 992 Roll Bar is the strongest, safest, and highest quality bolt-in roll bar on the market for your GT2RS, GT3 or GT3RS, period. In designing and building the CMS roll bar, safety and structural rigidity are our primary goals. That's why we fully TIG welded 1.75" Docol R8 Advanced High-Strength Steel tubing instead of the less-expensive but inferior 4130 CrMo others use. It's why we use the strongest chassis mounting points and cross-brace the main hoop. ATTENTION TO DETAIL IS AT THE HEART OF CMS PERFORMANCE Click Here for Installation Instructions The CMS roll bar places your safety harness shoulder straps at the proper angle (0 to -20o) and distance (as close as possible) to the driver, regardless of seat position. Our use of thicker Docol tubing and main-hoop cross bracing gives you an unobstructed rear view and safety superior to that of other products we've seen for sale. CMS rear kickers bolt to the 992's rear shock tower (where the factory racing roll cage mounts), the safest, strongest mounting points. This adds rigidity to the chassis and suspension. The main roll hoop is mounted to the steel frame structure beneath the vehicle just like the factory cage. BUILT LIKE A TANK, FINISHED LIKE A PORSCHE Full 360o TIG welding and professional powder-coating give CMS Performance roll bars unsurpassed structural integrity, fit, and finish. Offered in a full range of powder-coat colors to match your Porsche (including, of course, matte black if stealth is more your thing) all included in the price of the CMS roll bar. Superior engineering, design, quality, safety, and appearance at an affordable price, backed by our legendary customer service all add up to this: you can pay a lot more for a roll bar, but you'll only get the best from CMS Performance. ADD RACING HARNESSES TO YOUR ROLL BAR Add six-point Schroth Enduro 2x2 GT3, Schroth Flexi 2x2 GT3, or Sabelt Silver Series GT3, or four-point Schroth Profi II ASM GT3 harnesses to your order with our convenient pull-down menus above! These harnesses are specifically designed to bolt right up to your Porsche carbon lightweight bucket seats. (Porsche's passenger-side seat does not have a factory sub-strap pass through.) If you're installing six-point harnesses in your Porsche, we strongly recommend adding the CMS Performance Sub Strap Mounts to your order. They provide a solid, properly located anchor for your antisubmarine straps and are easy to install. CMS PERFORMANCE PORSCHE 992 GT3/GT3RS ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer part no.: CPRB-992 Materials: 1.75 x .095 Docol R8 Advanced High-Strength Steel tubing; CNC-cut precision mounting plates; CNC-machined steel interlocking roll bar joints Construction: full-penetration 360o TIG welding throughout Design features: one-piece main hoop; three-piece kickers; full seat travel with any seat Installation hardware: American-made Grade 8 hardware included This product is intended for off-road use only.

CMS Performance Bolt-In Roll Bar for Porsche 991 GT2RS, GT3 & GT3RS This Roll Bar Fits the Following Cars: 991.1 Porsche GT3 (2014-15) 991.1 Porsche GT3RS (2016)  991.2 Porsche GT3 (2018-19) 991.2 Porsche GT3RS(2019) 991.2 Porsche GT2RS(2018) THE BEST ROLL BAR FOR PORSCHE'S GT TRACK ANIMAL The CMS Performance 991 Roll Bar is the strongest, safest, and highest quality bolt-in roll bar on the market for your GT2RS, GT3 or GT3RS, period. In designing and building the CMS roll bar, safety and structural rigidity are our primary goals. That's why we fully TIG welded 1.75" Docol R8 Advanced High-Strength Steel tubing instead of the less-expensive but inferior 4130 CrMo others use. It's why CMS Performance uses the strongest chassis mounting points and cross-brace the main hoop. Click Here for Installation Instructions AMERICAN CRAFTSMANSHIP & ATTENTION TO DETAIL The CMS roll bar places your safety harness shoulder straps at the proper angle (0º to -20º) and distance (as close as possible) to the driver, regardless of seat position. CMS Performance uses thicker Docol tubing and main-hoop cross bracing to give you an unobstructed rear view without the need for additional bracing. That adds up to safety superior to that of other products we've seen for sale. CMS rear kickers bolt to the Porsche 991 rear shock towers (where the factory racing roll cage mounts), the safest, strongest mounting points. This adds rigidity to the chassis and suspension. The main roll hoop is mounted to the steel frame structure beneath the vehicle just like the factory cage. CMS PERFORMANCE MEANS STRENGTH & BEAUTY Fully TIG welded by master welders and professionally powder-coated in-house, the structural integrity, fit, and finish of the CMS Performance Porsche 991 GT2RS/GT3/GT3RS Roll Bar is absolutely unsurpassed. CMS Performance offers a full range of powder-coat colors professionally matched to Porsche OEM paint codes. Or you can choose a custom color from thousands of Prismatic Powders shades, including, of course, a beautiful matte black if stealth is more your thing. Powder coating is included in the price of your CMS Performance roll bar. Superior engineering, design, quality, safety, and appearance at an affordable price, backed by our legendary customer service all add up to this: you can pay a lot more for a roll bar, but you'll only get the best from CMS. ADD RACING HARNESSES FOR SAFETY AND SAVINGS! Add six-point Schroth Enduro 2x2 GT3 , Schroth Flexi 2x2 GT3 , or Sabelt Silver Series GT3 , or four-point Schroth Profi II ASM GT3  harnesses to your order with our convenient pull-down menus above. These harnesses are specifically designed to bolt right up to your Porsche carbon lightweight bucket seats. (Porsche's passenger-side seat does not typically have a sub-strap pass through.) If you're installing six-point harnesses in your Porsche, we strongly recommend adding the CMS Performance Sub Strap Mounts to your order. They provide a solid, properly located anchor for your antisubmarine straps and are very easy to install. CMS PERFORMANCE PORSCHE 991 GT2RS/GT3/GT3RS ROLL BAR DETAILS 1.75"x0.095" Docol R8 Advanced High-Strength Steel tubing for superior strength Full-penetration 360o TIG welding throughout One-piece main hoop and three-piece kicker make installation so much easier CNC-cut precision mounting plates CNC-machined steel interlocking clamps ease installation US-made Grade 8 hardware included Full seat travel with any seat Comes with detailed installation instructions & all necessary hardware for a seamless installation This product is intended for off-road use only.

CMS Performance Bolt In Roll Bar For BMW F82 M4 This Roll Bar Fits the Following Cars: BMW M4 F82 2015-2020 Carbon Roof BMW M4 Competition 2016-2020 Carbon Roof The Strongest and Safest Roll Bar for the BMW F82 M4 The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the BMW M4 and M4 Competition. Engineered with a premium on safety and structural rigidity, the exceptional design integrates perfectly with the M4's luxury/sport interior. CMS uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used in other bolt-in roll bars. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. Our one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. Rearward "kicker" supports are optimized for support in a roll-over event while maintaining an unobstructed rear view. The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0° to -20°) to the driver's shoulders regardless of seat position. Cutting Edge Materials and American-Made Craftsmanship Click Here for Installation Instructions The CMS Performance BMW M4 Roll Bar is designed to bolt directly to the M4 chassis strong points without the need for any modification of existing interior trim or use of backing plates. Adding a CMS custom designed rear seat delete gives the whole installation a clean, factory appearance. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched M4 factory colors. You can choose an amazing technical color like Superchrome! Or satin black for a more stealthy appearance. We have over 5,000 custom powder coat colors for a truly customized look. Our unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance Roll Bars to the top of the industry. The BMW M4 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to customers taking their M4 to the track! CMS Performance BMW F82 M4 Roll Bar Options CMS premium Rear Seat Delete Kit is custom-designed for the F82 M4, giving your roll bar installation a factory-finished look. CMS Roll Bar Harness Collars help keep your harness shoulder straps where you want them. CMS Performance BMW F82 M4 Roll Bar Details Manufacturer: CMS Performance Materials: 1.75″ X .095" Docol R8 Advanced High Strength Steel tubing throughout Construction: One-piece main hoop and three-piece kickers ease installation while maintaining exceptional strength Included hardware: Grade 8, American made CMS Performance BMW F82 M4 Roll Bar Features Optional premium custom-designed rear seat delete for a factory-finished appearance Precision-cut mounting plates Designed, manufactured, and finished in the USA American-made CNC machined solid steel interlocking joints Allows full seat travel with virtually any seat Comes with detailed installation instructions Installation requires removal of the factory rear seats. A rear seat delete kit is recommended but not required for roll bar installation. This product is intended for off-road race track use only.

CMS Performance Bolt In Roll Bar For BMW G87 M2 (2023+) THE PREMIUM ROLL BAR FOR THE POWERFUL NEW M2 Introducing the CMS Performance Roll Bar for the all-new, amazing G87 M2*.  The powerful new M2 promises to be a hoot on the track-day circuit, so we got to work right away engineering a bolt-in roll bar that lives up to Competition Motorsport's tradition of building the strongest, safest, most beautifully constructed roll bars on the market. The new CMS Performance roll bar for the G87 delivers on all points! ENGINEERED FOR SAFETY AND PERFORMANCE Click Here for Installation Instructions Conceived from the ground up with a premium on safety and structural rigidity, the exceptional design of the CMS Performance M2 roll bar integrates perfectly with the M2's luxury/sport interior. CMS Performance uses advanced Docol R8 Advanced High-Strength Steel tubing throughout our roll bars, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used in other bolt-in roll bars. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. The one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the M2 chassis, forming the backbone of the CMS Performance roll bar. Rearward kicker supports are optimized for support in a roll-over event while maintaining an unobstructed rear view. The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0° to -20°) to the driver's shoulders regardless of seat position. CUTTING EDGE MATERIALS, DIRECT BOLT-IN The CMS Performance BMW M2 Roll Bar is designed to bolt directly to the M2 chassis strong points without the need for any modification of existing interior trim or use of backing plates. Adding a CMS custom designed rear seat delete gives the whole installation a clean, factory appearance. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched G87 M2 factory colors. Or you can choose a standard color like Satin Black (for a stealthy install). We have access to over 5,000 powder coat colors, so if you need a color not on the list, just give us a call and we'll make sure your M2 roll bar has the look you like! BRAUN AND BEAUTY COMBINED Our unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance roll bars to the top of the industry. The BMW G87 M2 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to customers taking their new M2 to the track! * Note: This roll bar does not fit cars equipped with the optional factory sunroof. CMS PERFORMANCE BMW G87 M2 ROLL BAR DETAILS Manufacturer: CMS Performance Materials: Docol R8 advanced high-strength steel tubing, 1.75 x 0.095; CNC-cut carbon steel mounting plates; CNC-machined solid steel interlocking roll-bar joints Construction: full penetration 360º TIG welding Finish: powder coat, custom colors at no extra charge Rear seat delete: optional Design features: one-piece main roll hoop with six-point bracing; three-piece support kickers to ease installation Hardware included: all necessary American-made Grade 8 installation hardware BMW G87 M2 Roll Bar Features & Options: Optional custom-designed rear seat delete for a factory-finished appearance Factory powder coat colors plus custom finishes at no additional charge Schroth Profi II ASM four-point harnesses have a patented anti-submarine design to give you racing harness safety with your factory BMW seats Roll Bar Harness Collars help keep your shoulder straps where you want them Allows full seat travel with virtually any seat Detailed installation instructions Installation requires removal of the factory rear seats. This product is intended for off-road use only.

CMS Performance Bolt In Roll Bar For Toyota GR Supra (2020+) This Roll Bar Fits The Following Cars: Toyota GR Supra 3.0 Toyota GR Supra 2.0 THE PREMIUM ROLL BAR FOR YOUR AMAZING SUPRA Click Here for Installation Instructions The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the Toyota Supra GR. Engineered with a premium on safety and structural rigidity, the exceptional design integrates perfectly with the Supra's luxury/sport interior. CMS uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used in other bolt-in roll bars. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. CMS Performance's one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. Rearward "kicker" supports are optimized for support in a roll-over event while maintaining an unobstructed rear view. The harness bar is designed to put your racing harness shoulder straps at the proper angle (0 to -20º) relative to your shoulders, regardless of seat position. AMERICAN-MADE DESIGN EXCELLENCE SETS CMS APART The CMS Performance Toyota GR Supra Roll Bar is designed to bolt directly to the Supra chassis strong points without the need for any modification of the chassis or use of backing plates. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched Supra factory colors, satin black for a more stealthy appearance, or any of over 5,000 custom powder coat colors for a truly customized look. Check out the amazing Superchrome example in the photos! An unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance Roll Bars to the top of the industry. The Toyota Supra roll bar is the latest addition to their growing catalog, bringing safety, integrity, and beauty to customers taking their Toyota Supra to the track! CMS PERFORMANCE TOYOTA SUPRA ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer part no.: CPRB-GRSupra Materials: 1.75" X .095" Docol R8 Advanced High Strength Steel throughout (stronger than 4130 CrMo); CNC machined high-strength-steel interlocking joints Design: one-piece main hoop for superior strength and occupant safety; proprietary kickers ease installation w/o seat removal; CNC precision-cut mounting plates Construction: 360º TIG welded Allows full seat travel with virtually any seat Installation hardware: USA-made Grade 8 hardware included Installation instructions included This product is intended for off-road use only.

CMS Performance Bolt-In Roll Bar For Gen 6 Chevy Camaro Fits the Following Cars: Gen 6 Chevy Camaro (2016+) all except convertible STRONGEST ROLL BAR AVAILABLE FOR GEN 6 CAMARO The CMS Performance Camaro Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market. In designing the Camaro roll bar, safety, strength, and structural integrity were our primary goals. Fully TIG welded from Docol R8 Advanced High-Strength Steel allows us to design a roll bar that is stronger and lighter! Our innovative design maximizes the room for the factory Recaro seats, meaning taller drivers can send their seat all the way back and still maintain a comfortable recline. Precision CNC machined solid steel interlocking roll bar clamps on the kicker mounting plates help make installation a snap. Free custom powder-coating gives you a premium, finished look without breaking the budget. Add the optional custom-cut Rear Seat Delete Kit and you've got a fully trimmed-out roll bar installation that performs as great as it looks. Our Camaro roll bar forms the perfect foundation for taking your safety up a huge notch. Click Here for Installation Instructions SAFETY IS OUR FIRST PRIORITY Safety is the main reason to install a roll bar in the first place. As racers ourselves, we sweat the details. That's why we use 1.75" x .095" Docol R8. Docol is 15% stronger than 4130 CrMo, and much less brittle. Docol R8 also dissipates impact energy more effectively. It's the same tubing used in full-competition road racing roll cages because, first and foremost, it's a roll bar not a trim piece. Our beefy main hoop straddles the rear seat cross member, a much stronger location than the rear footwell, eliminating the need for underbody backing plates. Taking a cue from NHRA cage design, the diagonal supports feature a concave design to allow full front-seat travel while distributing roll-over energy between the main hoop and kickers. The harness cross-bar is precisely located to put your shoulder straps at both the proper angle (0 to -20 ) and distance to the driver. Finally our rear kickers bolt to a reinforced corner of the rear seat floor, again requiring no backing plates beneath the floor pan. A clear rear view is a safety concern. Our use of stronger materials and innovative design lets us keep your rear view unobstructed by additional bracing. This also helps weight down. Every detail of the CMS Gen 6 Camaro roll bar is engineered with safety as our primary goal. HAND CRAFTED IN AMERICA Okay, another reason people install a roll bar is that they look cool. We're car guys, we get that. Each roll bar is handcrafted right here in America by master fabricators for a perfect fit, beautifully 360o TIG welded for high strength, and fully powder-coated in our facility for a brilliant, durable finish. There's no extra charge for custom colors. CMS operates a complete powder-coating facility to offer you color-matched Camaro factory colors, giving your Camaro a personalized look that will last. None of your interior trim panels need to be eliminated or cut. Your rear seat back can be re-installed, or you can opt for our custom Shrader rear seat delete, the perfect place to put a track bag, helmet and HANS, driver cooling system, etc. (you can hide stuff under there, too). If you ever want to put your car back to stock, it will go back together as though the roll bar was never there. Complete, detailed instructions make installation pretty simple (figure about two hours if you're reasonably handy), and all Grade 8 hardware needed is shipped with your CMS roll bar. Add Racing Harnesses and a Head-And-Neck Restraint and and you're ready to hit the track safe and secure. CMS PERFORMANCE GEN 6 CAMARO ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer part no.: CPRB-CamaroG6 Materials: Docol R8 Advanced High-Strength Steel tubing 1.75 x .095; CNC-cut carbon steel mounting plates;  CNC-machined solid steel interlocking roll bar joints Construction: full-penetration 360o TIG welding Hardware included: all necessary American-made Grade 8 hardware Design features: one-piece main hoop/kicker design with detachable kicker feet for installation Weight: 51 lbs. (23.1 kg) Custom-made rear seat delete available Designed, built, and powder-coated in the USA Allows full seat travel with any seat This product is intended for off-road use only.

CMS Performance Bolt In Roll Bar For BMW F87 M2 (2016-2021) This Roll Bar Fits the Following Cars: BMW M2 (N55) 2016-2018 BMW M2 Competition (S55) 2019-2020 BMW M2 CS 2020-2021 THE PREMIER BOLT-IN ROLL BAR FOR THE ICONIC M2 The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the BMW M2, M2 Competition, and M2 CS. Engineered with a premium on safety and structural rigidity, the exceptional design integrates perfectly with the M2's luxury/sport interior. CMS uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used in other bolt-in roll bars. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. Our one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. Rearward "kicker" supports are optimized for support in a roll-over event while maintaining an unobstructed rear view. The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0 to -20 ) to the driver's shoulders regardless of seat position. The CMS Performance BMW M2 Roll Bar is designed to bolt directly to the M2 chassis strong points without the need for any modification of existing interior trim or use of backing plates. Adding a CMS custom designed rear seat delete gives the whole installation a clean, factory appearance. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched M2 factory colors, satin black for a more stealthy appearance, or any of over 5,000 custom powder coat colors for a truly customized look. Our unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance Roll Bars to the top of the industry. The BMW M2 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to customers taking their M2 to the track! Click Here for Installation Instructions CMS PERFORMANCE BMW F87 M2 ROLL BAR OPTIONS CMS premium Rear Seat Delete Kit is custom-designed for the F87 M2, giving your roll bar installation a factory-finished look. Schroth Profi II ASM four-point harnesses have a patented anti-submarine design to give you racing harness safety with your factory BMW seats. CMS Roll Bar Harness Collars help keep your shoulder straps safely and securely in place on the harness cross-bar. CMS PERFORMANCE BMW F87 M2 ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer part no.: CPRB-F87 Materials: Docol R8 Advanced High Strength Steel tubing 1.75 x 0.095; CNC-cut carbon steel mounting plates; CNC-machined solid steel interlocking roll bar joints Construction: full penetration 360º TIG welding Design features: one-piece main hoop for strength; three-piece kickers ease installation; allows full seat travel with virtually any seat Optional custom-designed rear seat delete All American-made Grade 8 hardware included Detailed installation instructions Installation requires removal of the factory rear seats. A rear seat delete kit is recommended but not required for roll bar installation. This product is intended for off-road use only.

CMS Performance Bolt-In Roll Bar For Porsche 981 & 718 Cayman This Roll Bar Fits the Following Cars: 2014-16 (981) Porsche Cayman Base, S, GTS, GT4 2017+ (718) Porsche Cayman Base, S, GTS, GT4 HANDS DOWN THE BEST ROLL BAR FOR YOUR CAYMAN Click Here for Installation Instructions The CMS Performance Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market for your Cayman. In designing our roll bar, safety and structural rigidity were our primary goals. That's why we use 1.75 x .095 Docol R8 Advanced High-Strength Steel tubing, much stronger than the smaller 4130 CrMo tubing others use. The harness cross-bar is designed to put your harness shoulder straps at the proper angle (0 to -20 ) and distance to the driver, regardless of your seat position. Yet the CMS roll bar requires no cutting through the carpeted hump in the middle of your interior (replacing this carpet is expensive if you ever want to return your car to stock). This also provides an ideal mount for a SmartyCam video camera. AMERICAN-MADE QUALITY, STRENGTH, AND ATTENTION TO DETAIL CMS Performance uses of Docol R8 tubing throughout, which lets them keep the driver's rear view unobstructed by the rear diagonal bracing typically used to support weaker roll bars. This also gives you unfettered access to the engine cover without removing any part of your roll bar. Other roll bars require partial removal to get at your engine -- not ideal in a car that sees track time. The CMS Performance roll bar's rear kickers bolt to the Cayman's rear shock towers, the safest, strongest possible mounting point. This adds rigidity to the chassis and suspension. The main roll hoop is mounted to the frame structure across the rear bulkhead for lighter weight and superior strength. CUSTOM POWDER COATING THE HALLMARK OF CMS PERFORMANCE CMS Performance will powder coat your roll bar in a color custom-matched to Porsche's OEM color palette. Or you can go with a rich satin black powder coat for a stealthy look. Every CMS Performance roll bar is professionally powder-coated to order, in-house by CMS Performance. Fully TIG welded by master welders using superior materials, the design, strength, fit, and finish of the CMS Performance roll bar all add up to this: you can spend more on a roll bar, but you only get the best from CMS Performance. SAVE ON RACING HARNESSES WITH YOUR ROLL BAR Add six-point Schroth Enduro 2x2 GT4 , Schroth Flexi 2x2 GT4 , or Sabelt Silver Series GT4, or four-point Schroth Profi II ASM GT4 harnesses to your order using our convenient pull-down menus above! These harnesses are specifically designed to bolt right up to your Porsche carbon lightweight bucket seats. (Porsche's passenger-side seat does not have a factory sub-strap pass through.) If you're installing six-point harnesses in your Porsche, we strongly recommend adding the CMS Performance Sub Strap Mounts to your order. They provide a solid, properly located anchor for your anti-submarine straps, are easy to install. CMS PERFORMANCE PORSCHE CAYMAN 981/718 ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer part no.: CPRB-718981 Main hoop and kickers 1.75 x .095" Docol R8 Advanced High-Strength Steel Fully TIG welded One-piece main hoop Three-piece rear kickers make installation so much easier Easy engine access without removing any part of the roll bar No cutting of your central carpet Laser-cut mounting plates Designed, built, and finished by CMS in the US CNC machined high-strength-steel interlocking clamps to ease installation Easy to install and perfect fitment guaranteed Comes with detailed installation instructions and all necessary hardware CMS PERFORMANCE PORSCHE 981/718 ROLL BAR OPTIONS Pre-cut OEM Porsche interior trim for easier installation, preserving your original trim CMS Performance Sub Strap Mount This product is intended for off-road use only.

CMS Performance Bolt In Roll Bar For BRZ & GR86 This Roll Bar Fits The Following Cars: Toyota GR86 2022+ Subaru BRZ 2022+ The Best and Strongest Bolt-In Roll Bar for the FR-S/BRZ/GR86 The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the second-gen  Toyota GR86, and Subaru BRZ. Engineered with a premium placed on safety and structural rigidity, the exceptional design of the CMS Performance Roll Bar integrates perfectly with the car's sporty, all-business interior. CMS Performance uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength, impact absorption, and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used by other roll bar manufacturers. This makes the CMS Performance Roll Bar for the Toyota GR86/Subaru BRZ superior in every way, including resistance to deformation, weld integrity, and energy dissipation. The one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. The rearward kickers are optimized for support in a roll-over event while maintaining an unobstructed rear view for the driver. The main hoop cross bar is designed to locate your racing harness shoulder straps at the proper angle (0° to -20° front-to-back) to the driver's shoulders regardless of seat position. True Bolt-In Installation Without Sacrificing Safety or Looks Click Here for Installation Instructions The CMS Performance Roll Bar bolts directly to chassis strong points without the need for any significant modifications to the chassis or use of under-car backing plates. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Exceptional Color Options Set CMS Performance Apart Each CMS Performance roll bar includes custom powder coating in your choice of color-matched factory paint colors for Toyota and Subaru! You don't have to settle for generic black, white, red, or yellow. CMS Performance can also powder coat your roll bar in one of our amazing technical colors, such as the astoundingly cool Superchrome! And, of course, there's always our rich satin black option for a stealthy installation. Custom Made Rear Seat Delete Kit Available CMS Performance offers an optional customized Shrader rear seat delete kit made specifically for the Toyota GR86 and Subaru BRZ. It is specially modified to fit the CMS Performance Roll Bar, giving your installation an amazing factory-finished look. CMS Performance: The Best Products At The Best Price An unwavering focus on cutting-edge materials, unsurpassed design & construction, and premium fit & finish has propelled CMS Performance roll bars to the top of the industry. The CMS Performance Toyota GR86/Subaru BRZ Roll Bar is the latest addition to our growing catalog, offering unsurpassed safety, integrity, design and customization to customers taking this amazing car to the next level on the street or at the track. CMS Performance Toyota GR86 / Subaru BRZ Roll Bar Details Manufacturer: CMS Performance Manufacturer Part: CPRB-GR86 Materials: 1.75″ X .095" Docol R8 Advanced High Strength Steel Features: One-piece main hoop for superior strength and occupant safety; proprietary kicker design eases installation while maintaining exceptional strength CNC-cut mounting plates CNC machined high-strength-steel interlocking joints Allows full seat travel with virtually any seat All USA-made Grade 8 hardware included Comes with detailed installation instructions This product is intended for off-road race track use only.

CMS Performance Bolt-In Roll Bar For Porsche 987 Cayman Fits the Following Cars: Porsche 987 Cayman (2007-12) Porsche 987 Cayman S (2006-12) Porsche 987.2 Cayman R (2011-12) HANDS DOWN THE BEST ROLL BAR FOR THE 987 The CMS Performance Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market for your Porsche 987 Cayman (base, S, GTS, or R). In designing our roll bar, safety and structural rigidity were our primary goals. That's why we use 1.75" x .095" premium Docol R8 Advanced High-Strength Steel tubing, vs. the weaker, more brittle 4130 tubing others use. Click Here for Installation Instructions RENOWNED CMS PERFORMANCE ATTENTION TO DETAIL Our attention to detail puts your harness shoulder straps at the proper angle (0 to -20 ) and distance relative to the driver, regardless of seat position. Our unique design provides an ideal mount for a Smarty Cam video camera. Our use of thicker state-of-the-art Docol tubing throughout allows us to keep the driver's rear view unobstructed by diagonal bracing, giving you unfettered access to the engine cover with the roll bar in place. (Our competitors make you remove part of your roll bar to get at your engine, risking damage to the bar and your interior!) The CMS roll bar's rear kickers bolt to the Cayman's rear shock towers, the safest, strongest mounting points. This allows the roll bar to contribute tremendous rigidity to your chassis and suspension. The main roll hoop is mounted to the frame structure across the rear bulkhead for lighter weight and superior strength. EXCEPTIONAL STRENGTH & UNCOMMON BEAUTY Each CMS roll bar is fully powder coated in your choice of colors custom-matched to Porsche's 987 color palette, or you can choose from over 6,000 custom colors -- no extra charge. Fully TIG welded by our master welders, using superior materials, and custom powder coated in-house by CMS Coatings. The design, strength, fit, and finish of the CMS roll bar all add up to this: you can spend more on a roll bar, but you only get the best from CMS. CMS PERFORMANCE PORSCHE 987 ROLL BAR DETAILS 1.75" X .095" Docol R8 Advanced High-Strength Steel for superior strength and safety Fully TIG welded for durability, strength, and beauty One-piece main hoop for incredible strength and safety. Full access to your engine without removal of any part of the roll bar Minimal cutting of trim required, for a factory-installed look CNC plasma-cut mounting plates Designed, built, and powder-coated by CMS in the USA CNC machined high-strength steel interlocking clamps to ease installation Allows full seat travel with any seat Straightforward installation and perfect fitment Detailed installation instructions and all necessary hardware included This product is intended for off-road use only.

CMS Performance Bolt-In Roll Bar For Gen 5 Chevy Camaro (2010-2015) This Roll Bar Fits the Following Cars: Chevrolet Camaro, Gen 5 (2010-2015), all coupes Does not fit convertible THE STRONGEST ROLL BAR AVAILABLE FOR THE GEN 5 CAMARO Click Here for Installation Instructions The CMS Performance Camaro Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market. In designing the Camaro roll bar, safety, strength, and structural integrity were the primary goals. Fully TIG welded from Docol R8 Advanced High-Strength Steel allows CMS Performance to design a roll bar that is stronger and lighter! Our innovative design maximizes the room for the factory Recaro seats, meaning taller drivers can send their seat all the way back and still maintain a comfortable recline. Precision CNC machined solid steel interlocking roll bar clamps on the kicker mounting plates help make installation a snap. Free custom powder-coating gives you a premium, finished look without breaking the budget. Add the optional custom-cut Rear Seat Delete Kit and you've got a fully trimmed-out roll bar installation that performs as great as it looks. The CMS Performance Gen 5 Camaro Roll Bar is the perfect foundation for taking your safety up a huge notch. SAFETY IS CMS PERFORMANCE FIRST PRIORITY Safety is the main reason to install a roll bar in the first place. As racers themselves, CMS Performance sweat the details. That's why they use 1.75" x .095" Docol R8. Docol is 15% stronger than 4130 CrMo, and much less brittle. Docol R8 also dissipates impact energy more effectively. It's the same tubing used in full-competition road racing roll cages because, first and foremost, it's a roll bar not a trim piece. The beefy main hoop of the CMS Performance Gen 5 Camaro Roll Bar straddles the rear seat cross member, a much stronger location than the rear footwell, eliminating the need for underbody backing plates. Taking a cue from NHRA cage design, the diagonal supports feature a concave design to allow full front-seat travel while distributing roll-over energy between the main hoop and kickers. The harness cross-bar is precisely located to put your shoulder straps at both the proper angle (0 to -20 ) and distance to the driver. Finally, the rear kickers bolt to a reinforced corner of the rear seat floor, again requiring no backing plates beneath the floor pan. A clear rear view is a safety concern. CMS Performance uses stronger materials and innovative design, making it safe to keep your rear view unobstructed by additional bracing. This also helps weight down. Every detail of the CMS Performance Gen 5 Camaro Roll Bar is engineered with safety as the primary goal. HAND CRAFTED IN AMERICA Okay, another reason people install roll bars is because they look cool. We're all car guys, we get that. Each CMS Performance roll bar is handcrafted right here in America by master fabricators for a perfect fit, beautifully 360o TIG welded for high strength, and fully powder-coated in our facility for a brilliant, durable finish. There's no extra charge for custom colors. CMS Performance operates a complete powder-coating facility to offer you color-matched Camaro factory colors, giving your Camaro a personalized look that will last. None of your interior trim panels need to be eliminated or cut. Your rear seat back can be re-installed, or you can opt for our custom Shrader rear seat delete, the perfect place to put a track bag, helmet and HANS, driver cooling system, etc. (you can hide stuff under there, too). If you ever want to put your car back to stock, it will go back together as though the roll bar was never there. Complete, detailed instructions make installation pretty simple (figure about two hours if you're reasonably handy), and all Grade 8 hardware needed is shipped with your CMS roll bar. Add Racing Harnesses and a Head-And-Neck Restraint and and you're ready to hit the track safe and secure. CMS PERFORMANCE GEN 5 CHEVY CAMARO ROLL BAR DETAILS 1.75 Ä≥ X .095" Docol R8 Advanced High-Strength Steel for superior safety Full 360o TIG welding for ultimate strength, integrity, and beauty Stronger one-piece main hoop/kicker design with detachable kicker feet for installation Only 51 lbs., yet incredibly strong Custom-made rear seat delete available Precision CNC-cut mounting plates Designed, built, and powder-coated in the USA CNC machined steel interlocking roll bar clamps ease installation Allows full seat travel with any seat Straightforward install and perfect fitment Comes with all necessary hardware This product is intended for off-road use only.

CMS Performance Bolt In Roll Bar For FR-S/BRZ/GT86 This Roll Bar Fits The Following Cars: Scion FR-S (ZN6), 2013-2016 Toyota GT86 (ZN6), 2017-2020 Subaru BRZ (ZC6), 2013-2020 The Superior Bolt-In Roll Bar for the FR-S/BRZ/GT86 The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the first-gen  Scion FR-S, Toyota GT86, and Subaru BRZ. Engineered with a premium placed on safety and structural rigidity, the exceptional design of the CMS Performance Roll Bar integrates perfectly with the car's sporty, all-business interior. CMS Performance uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength, impact absorption, and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used by other roll bar manufacturers. This makes the CMS Performance Roll Bar for the Scion FR-S/Toyota GT86/Subaru BRZ superior in every way, including resistance to deformation, weld integrity, and energy dissipation. The one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. The rearward kickers are optimized for support in a roll-over event while maintaining an unobstructed rear view for the driver. The main hoop cross bar is designed to locate your racing harness shoulder straps at the proper angle (0° to -20° front-to-back) to the driver's shoulders regardless of seat position. True Bolt-In Installation Without Sacrificing Safety or Looks Click Here for Installation Instructions The CMS Performance Roll Bar bolts directly to chassis strong points without the need for any significant modifications to the chassis or use of under-car backing plates. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Exceptional Color Options Set CMS Performance Apart Each CMS Performance roll bar includes custom powder coating in your choice of color-matched factory paint colors for Scion, Toyota, and Subaru! You don't have to settle for generic black, white, red, or yellow. CMS Performance can also powder coat your roll bar in one of our amazing technical colors, such as the astoundingly cool Superchrome! And, of course, there's always our rich satin black option for a stealthy installation. Custom Made Rear Seat Delete Kit Available CMS Performance offers an optional customized Shrader rear seat delete kit made specifically for the Scion FR-S, Toyota GT86, and Subaru BRZ. It is specially modified to fit the CMS Performance Roll Bar, giving your installation an amazing factory-finished look. CMS Performance: The Best Products At The Best Price An unwavering focus on cutting-edge materials, unsurpassed design & construction, and premium fit & finish has propelled CMS Performance roll bars to the top of the industry. The CMS Performance Scion FR-S/Toyota GT86/Subaru BRZ Roll Bar is the latest addition to our growing catalog, offering unsurpassed safety, integrity, design and customization to customers taking this amazing car to the next level on the street or at the track. CMS Performance Scion FR-S/Subaru BRZ Roll Bar Details Manufacturer: CMS Performance Manufacturer Part: CPRB-GT86 Materials: 1.75″ X .095" Docol R8 Advanced High Strength Steel Features: One-piece main hoop for superior strength and occupant safety; proprietary kicker design eases installation while maintaining exceptional strength CNC-cut mounting plates CNC machined high-strength-steel interlocking joints Allows full seat travel with virtually any seat All USA-made Grade 8 hardware included Comes with detailed installation instructions This product is intended for off-road race track use only.