Data Logging & Video

The New AiM SW4 Steering Wheel The AiM SW4 is one of the most versatile racing steering wheels available, compatible with a long list of ECU protocols to meet any driver’s needs. This latest evolution of the AiM steering wheel incorporates data-logging in the steering wheel itself, so there's no need for a separate logger (e.g., AiM Evo4 or Evo5). This saves space and makes installation and integration into your race car's electronics easier. Optional paddle shifters and clutch paddles can be added in the dropdown above for a complete car control solution. Choose the Version That Fits Your Needs Compatible with more than 2,000 ECU protocolsSW4 is one of the most versatile steering wheels in the market, with a long list of compatible ECU protocols, to meet any driver’s need. Freely configurable pagesThe high contrast TFT display offers a wide range of possible graphic data layouts in multiple pages, putting all the data you need for every situation right at your fingertips. Individually configurable push-buttons8 completely configurable buttons and 2 additional free contact normally open buttons. Each button can be configured as Momentary, Toggle, or Multi-Position. The SW4 comes with a set of stickers that can be used to identify the function buttons as well as the remaining eight push-buttons.  Rotary switches are completely configurableSW4 has three completely configurable rotary switches. Switch through various functions, pages, etc., with a positive "click". Individually configurable LEDs, shift lights can be configured for each gear including LED colors and RPM threshold values. There are four alarm LEDs, too, which can be individually triggered. Clutch and Paddle Shifts (optional)SW4 can be upgraded by adding electronic paddle shifters and/or clutch shifters. These put even more features and controls right at the tips of your fingers!

AiM MXT 1.3 Logger With GPS Ready to elevate your racing game? Meet the AiM MXT 1.3 Logger with GPS – the ultimate data-logging dash that transforms your track day into a high-tech mission. This bad boy isn't just a dashboard; it's your new best friend on the circuit. Features and Benefits Flexibility and Customization Galore: The AiM MXT 1.3 boasts an extra-large 1280x480 pixel (10" diagonal) TFT display, breaking free from the boring, factory-designed LCDs. Want your data your way? You got it! The customizable screen lets you set up eight different pages with unique designs. Data Overload (in the best way): With eight analog input channels, you can sample, log, and display a wide array of temperatures, pressures, and potentiometers (think throttle and steering positions). And that's just the start. A CAN input allows endless expansion with AiM CAN Data Hubs (sold separately). Connect Lambda (O2) sensors, SmartyCam, or even more channels without using analog inputs! Ultimate Compatibility: Hook up to multiple ECUs to log any data your engine management system gathers. The MXT 1.3 also includes an internal gyroscope, 3-axis g-sensor, GPS module, four-wheel speed channels, a lap time receiver input, and two digital outputs. It's a data-logging beast that grows with you. Visual Delight: Housed in a sleek, anodized aluminum frame (10.94" x 5.3"), the 9.6" x 3.6" screen auto-dims to match your environment. Configure ten shift light LEDs and six alarm LEDs to flash in any of seven colors, triggered by your custom conditions. Set shift lights for each gear, choose colors, and more! Rear View Magic: An extra port lets you connect analog cameras to use the dash as a backup or rear-view mirror display. Note: this doesn't work with the SmartyCam, but it's perfect for other cameras. Massive Storage and Easy Downloads: With 4GB of non-volatile memory, store hours of race data for deep dives later. Download everything to your computer using the built-in secure Wi-Fi – no cables needed. What’s in the Box? The MXT 1.3 data logging display, wiring harness with a 37-pin Deutsch connector, and the GPS09C module. Note: All sensors are sold separately, and for additional connections, you’ll need the AiM MX-Series Auxiliary Wiring Harness with 22-Pin Deutsch Connector (also sold separately). Product Specifications: TFT Display: 1280x480 pixel (10" diagonal) Housing: 10.9" x 5.3" Housing material: anodized aluminum ECU Connections: CAN, RS232 or K-Line Analog/digital inputs: eight configurable, analog/digital (0-5V, 0-12V) max 500 Hz each Digital Inputs: four speed channels, one RPM channel Digital Outputs: two (max 1A each) Inertial Platform: internal 3 axis ±5G accelerometer,+ 3 axis gyro max 100 Hz Memory: 4GB, non-volatile Connectivity: secure 802.11 Wi-Fi Power Supply: 9V to 15V external Waterproof: IP67 FAQs Q: Can the MXT 1.3 connect to my car's ECU? A: Absolutely! The MXT 1.3 can connect to a wide range of ECUs to log any data collected by the engine control unit. Q: How many pages can I customize on the display? A: You can create up to eight different pages, each with its unique screen design. Q: Do I need a separate power supply? A: Yes, the MXT 1.3 requires a 9 - 15V external power supply. Q: Is the SmartyCam compatible with the camera input port? A: No, the extra port on the MXT 1.3 is not compatible with the SmartyCam. It’s designed for other analog cameras. Q: What do I need for additional connections? A: For analog channels 5-8, speed inputs 2-4, digital outputs, and RS232 ECU connection, you’ll need the AiM MX-Series Auxiliary Wiring Harness with 22-Pin Deutsch Connector (sold separately). Ready to dominate the track? The AiM MXT 1.3 Logger with GPS is your ticket to precision, performance, and endless customization. Don’t just drive – thrive. Grab yours today and leave your competition in the dust! Call To Action: Don’t wait – gear up for your next race with the AiM MXT 1.3 Logger with GPS. Click "Add to Cart" now and transform your driving experience! All auxiliary sensors and modules sold separately.

AiM Sports SmartyCam 3 Dual Data-Logger Camera Designed for the most demanding racers, the AiM SmartyCam 3 Dual is a true dual-lens HD motorsports camera and data-logger designed for the rigors of competition. Taking the best features of the SmartyCam 2.1 and 2.2 GPHD, the SmartyCam 3 Dual brings two full HD images from independent cameras in H.264 1920x1080 pixels at a clear 60 fps. AiM Sports SmartyCam 3 Dual Data Logger Camera Details Manufacturer: AiM Sports Field of View: 67º, 84º or 120º Manufacturer part no: 67º FOV: XS3DB67L2L200 84º FOV: XS3DB84L2L200 120º FOV: XS3DB120L2L200 Video format: H.264 1920x1080 pixels @ 60 fps Display resolution: 2.4" (240 x 320 pixels) Lenses: low distortion CMOS sensor: Global shutter Internal battery: rechargeable lithium-ion Video out: 3G-SDI External power: 9-15 V Supported MicroSD card (not included): up to 2TB Operating temperature range: -10 C/+50 C Auto Power On/Off: yes Auto Start/Stop Recording: yes Body: anodized aluminum Dimensions, main unit: 154.4 x 109.6 x 42.0mm Dimensions, each bullet camera: 24.0 diam x 48.2mm Connectors: Deutsch 22 pin (1), SMA SDI Video out (1), SMA bullet connection (2), USB-C (1) Bullet camera cable length: 2m (6.6 ft) Weight: Main unit, 800g; bullet cameras (each), 45 g Waterproof: IP65 Dual Motorsports CamerasThe SmartyCam 3 Dual features two separate bullet cameras that are easily placed anywhere in the cockpit with the included 2 meter (6.6 foot) SMA cables. SMA cables are small, shielded, and feature threaded connections on each end for the best in video data in the harshest of race conditions. Video Streaming OutputSmartyCam 3 Dual features a video streaming output channel with SDI interface. Your 3G-SDI format video and audio stream is now able to be sent to a data streamer at your choice of 30 or 60 fps. Live data streaming has never been easier. RaceStudio 3 with AnalysisThe AiM Race Studio 3 software is included to allow you to customize and configure your overlays in a virtually infinite variety of ways. You can easily add your team logo, sponsor information, track map or graphic objects from a list of pre-determined sets with the same layout or single objects from different sets, This could even be adding your second camera video in Picture in Picture mode with your team logo and track map showing. AiM RaceStudio 3 is powerful and fully customizable for your team and sponsor needs.Video Analysis Post RaceThe entire video session is then downloaded on your PC and then split easily. Replay of individual videos of separate laps can now be simultaneously viewed to identify best race line and lowest lap time. "Share And Compare" is now available for you to compare your best lap with your friend's personal best. AiM Race Studio 3 makes lower lap times easy.Internal Data-logger Built InThe SmartyCam 3 Dual has a second ECU CAN interface allowing for CAN expansions without the need for an ECU bridge. Both your video and CAN data is stored on a standard removable SD card with capacity of up to 2TB with all data stored in MP4 file format. At the end of your test, your SD Card contains all the information you need for a deep data analysis and lower lap times. SD card is sold separately.Designed for the extremeThe SmartyCam 3 Dual is a true motorsports camera protected by a solid aluminum housing with a hard anodized finish. Built for the rigors of racing with an IP65 waterproof rating, the SmartyCam 3 Dual is at home in your Porsche GT3 Cup, Super Trofeo, TA2 Camaro, F4, or 125cc Shifter Kart. Whatever you drive, Trust the AiM SmartyCam 3 Dual to get you great video and data.Automatic Start & StopEasy integration and automation with your AiM family of data components. The SmartyCam 3 Dual can be set up to automatically power on, start recording, stop recording, lock your data and video file and power down. Focus on your competition, not your proven data system.No "Wave Effect" with Global Shutter CMOSSolid motor mounts, straight cut gearboxes, and hi revving race engines affect most wave type shutter systems. If you have ever seen a video that gets “wavy” at high RPM’s, you are seeing the limits of wave shutters. SmartyCam 3 Dual uses the solid CMOS Global Shutter to provide quality, crisp, clear videos in the most aggressive of race cars.High Quality Video in a Small Video File SizeOptimized video compression in H.264 allows a more compact video size for a perfect balance of file size and video quality. Full HD is accomplished without the massive file size normally required using this compression. Championship World Racing League, SRO, and ChampCar teams swap video cards at every practice, qualifying and race pit stop. This data is only readable after it is uploaded, so the H.264 allows for a faster data download of your driver and vehicle’s performance and vehicle health.  

AiM MXG 1.3 Large Color 7" Data-Logging Dash The AiM MXG 1.3 data-logging dash represents a huge leap forward in racing display flexibility. The brilliant 800x480 pixel, 7.0" color TFT display frees you from the constraints of a single, factory-designed dash display. The MXG shows you the data you want, the way you want in brilliant, high-contrast color. The AiM MXG 1.3 is a large, brilliant dash designed to acquire and display data coming from your ECU, an internal accelerometer and gyro, the included GPS09 module, analog/digital inputs, and pre-defined math channels. Performance data acquisition can be expanded by adding up to eight expansion modules (sold separately). The large 7" high-color TFT display makes it perfect for installation in wider cockpits in touring and GT cars. CONFIGURABLE PAGES You can define all the custom pages you wish, choosing from a large library of page styles and colors. Configure which data you want to see, where, and how it's displayed (including scale limits and units-of-measure) on a page-by-page basis. Moving from page to page is as easy as pushing a button! INPUT/OUTPUT FLEXIBILITY Eight fully configurable analog input channels can sample, log, and display a wide range of temperatures, pressures, and potentiometers (throttle position, steering wheel position, etc). CAN Inputs allow you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (Part No. MC-329, sold separately). These hubs let you connect other inputs such as Lambda Controller (O2), SmartyCam 3, and channel expansion hubs, all without using any analog channels. A separate CAN output allows you to send messages to your vehicle's existing CAN network, adding to your vehicle system control possibilities! The MXG 1.3 can also be connected to many different ECUs to log data. An internal three-axis accelerometer, gyroscope, and magnetometer; GPS09C GPS input; four wheel-speed channels; lap time receiver input; and two digital outputs add up to a exceedingly flexible, expandable data-logger that can grow with you and your car set-up. It even has a screw-in port to add analog cameras used for a clear rear view in visibility-challenged race cars! ALARMS & SHIFT LIGHTS Flexible alarms on the MXG 1.3 include six configurable RGB alarm LEDs. You choose the conditions, you choose the colors. Select a solid alarm or flashing one (and the flashing frequency), choose to have an accompanying text message, and set the alarm priorities. The integrated shift light array features a host of advanced multi-colored RGB shift light patterns that can be customized as you like, including RPM max for each individual gear. DIGITAL OUTPUTS The MXG 1.3 features two digital outputs (low-side type, switch to ground) that can be configured to activate/deactivate external systems (switch on/off additional lights, cooling fan relays, fluid circulation pumps, etc.) based on those inputs. MEMORY & WIFI CONNECTIVITY The 4GB non-volatile memory can store hours of information for detailed analysis using AiM's latest RaceStudio 3 software. A secure 802.11 WiFi connection makes it even more convenient to configure, calibrate, and download your data wirelessly! No more need to move your PC close to the vehicle, you can do it from your trailer or tow vehicle up to 60 yards away. AiM SPORTS MXG 1.3 LARGE DASH & DATA LOGGER DETAILS Manufacturer: AiM Sports Manufacturer part no.:  Dimensions: 9.3" x 5.0" x 1.0" Housing: anodized aluminum Display: 7.0" high-contrast color TFT Display resolution: 800x480 pixels Inertial platform: internal 3 axis ±5G accelerometer+ 3 axis gyro max 100 Hz Internal memory: 4GB Connectors: Motorsport, 37-pin (1) Motorsport, 22-pin (1) Binder 712, 5-pin (1) Weight: 2.1 lbs (950g) Waterproof: IP67 ALL KITS INCLUDE: AiM MXG 1.3 data-logging dash GPS09C module with cable USB cable Wiring harness with 37-pin connector User manual & RaceStudio 3 software, downloadable here All other sensors and modules sold separately.

AiM Power Distribution Module PDM32 Kit w/ 10" Display (Road Icons) The AiM PDM32 Power Distribution Module is designed to distribute power to multiple circuits on your vehicle, replacing traditional fuse & relay systems. The 10" TFT display neatly arranges an incredible amount of information right in front of you. This version includes traditional street car icons (parking brake, windshield wiper, battery, etc.) AiM POWER DISTRIBUTION MODULE PDM32 KIT DETAILS Manufacturer: AiM Sports Manufacturer Part Number: XC1PDM32D10-C2 Includes 10" Display w/ Road Icons: Yes Includes Choice of GPS Module: Yes 28 high side outputs 4 Half Bridge Outputs Replaces traditional fuse & relay systems Alternate ID: MC-510 AiM PDMs are housed in an anodized billet aluminum case are designed specifically for the rigors of motorsport, and include a complete professional data logger & internal dash controller. Using an AiM PDM at the center of vehicle electronics greatly simplifies your wiring harness and electronics installation while providing much more control. AiM's PDM32 also offers some interesting features that you wouldn't necessarily expect to see in a traditional distribution module, such as: ECU connection for logging data, eliminating the need to add another data logging unit to your car GPS module compatibility for lap timing (GPS module sold separately) Dash controller for managing the 6" or 10" PDM dash displays (displays available separately) 9-axis EMU platform Mirror camera control for adding a reverse camera to the PDM dash display (camera & display available separately) The AiM PDM32 offers four different power output levels: 4 rated up to 20A (high power) 12 rated up to 15A (mid power) 12 rated up to 10A (low power) 4 rated up to 35A (Half Bridge) Protected for over-voltage, under-voltage, over-current, & over-temperature Total max current: 120A Each output provides status feedback for open circuit, short circuit, high temperature, over current, under voltage, & over voltage. Inrush current, number of fault retries, & time between retries are all definable. All the outputs are configurable as PWM and allow soft start/stop. For every output there is a multicolor status LED showing: Enabled/Disabled Activated/Not Activated Fault An elegant visual interface allows flexible and powerful configuration for every power output. Some "black boxes" are available for simplifying the configuration. For example, the wiper may be managed by the LIN connection or using the Half Bridges. The AiM PDM32 features the following input channels: Analog/Digital: 8 Only Digital: 4 Speed: 2 If configured as Analog inputs, it is possible to activate an internal 2K Ohm resistor for connecting most of the sensors directly. If configured as Digital inputs, it is possible to activate a 10K Ohm Pull Up or a 10K Ohm Pull Down. The PDM32 supports the new 6" & 10" TFT displays, fully configurable with Race Studio 3. It also features two analog camera inputs that allow you to swap your display into a mirror camera with the press of a button or through configurable event logic- reverse gear being the most common option. The PDM32 receives, uses, & records data from: ECU- more than 1,000 protocols available Digital/Analog inputs Internal 9-axis EMU GPS- position & lap time Expansions Push buttons, from RIO02 module or from any commercial CAN keypad, than to simple configurability of CAN protocols All the currents & status of all the power outputs Other user-defined math channels AiM PDMs come with 4,000 tracks in their database and automatically select the one you are driving on, in order to calculate Lap Time when you pass the start/finish line. An internal data-logger is available, capable of recording all the analog inputs, digital inputs, ECU channels, GPS values, currents, & status of all the power outputs.

AiM Power Distribution Module PDM32 Kit w/ 10" Display (Race Version) The AiM PDM32 Power Distribution Module is designed to distribute power to multiple circuits on your vehicle, replacing traditional fuse & relay systems. The 10" TFT display neatly arranges an incredible amount of information right in front of you. This race version does not have street car icons (parking brake, windshield wiper, battery, etc.) AiM Power Distribution Module PDM32 Kit w/ 10" Display - Race Icons Details Manufacturer: AiM Sports Manufacturer Part Number: XC1PDM32D10-C2NI Includes 10" display w/ no icons: Yes Includes choice of GPS module: Yes 28 high side outputs Four half-bridge outputs Replaces traditional fuse & relay systems AiM PDMs are housed in an anodized billet aluminum case are designed specifically for the rigors of motorsport, and include a complete professional data logger & internal dash controller. Using an AiM PDM as the centerpiece of your vehicle electronics greatly simplifies your wiring harness and electronics installation while providing much more control. The AiM PDM32 Is Feature-Laden AiM's PDM32 also offers some interesting features that you wouldn't necessarily expect to see in a traditional distribution module, such as: ECU connection for logging data, eliminating the need to add another data logging unit to your car GPS module compatibility for lap timing (GPS module sold separately) Dash controller for managing the 6" or 10" PDM dash displays (displays available separately) 9-axis EMU platform Mirror camera control for adding a reverse camera to the PDM dash display (camera & display available separately) Multiple Power Output Levels To Choose From The PDM32 offers four different power output levels: 4 rated up to 20 A (high power) 12 rated up to 15 A (mid power) 12 rated up to 10 A (low power) 4 rated up to 35 A (half-bridge) Protected for over voltage, under voltage, over current, and over temperature Total max current: 120 A Each output provides status feedback for open circuit, short circuit, high temperature, over current, under voltage, and over voltage. In-rush current, number of fault retries, and time between retries are all definable. All the outputs may be configured as PWM (pulse-width modulation) and allow soft start/stop. For every output, a multicolor LED shows the status: Enabled/disabled Activated or not Fault An elegant visual interface allows flexible and powerful configuration for every power output. Some "black boxes" are available for simplifying the configuration. For example, the wiper may be managed by the LIN connection or using the half-bridges. Multiple Input Channel Flexibility The AiM PDM32 features the following input channels: Analog/digital: 8 Only digital: 4 Speed: 2 When configured for analog inputs, it is possible to activate an internal 2 kΩ resistor for connecting most sensors directly. If configured with digital inputs, it is possible to activate a 10 kΩ pull-up or a 10 kΩ pull-down. The PDM32 supports AiM's latest 6" & 10" TFT displays, fully configurable with Race Studio 3. It also features two analog camera inputs that allow you to swap your display into a mirror camera with the press of a button or through configurable event logic- reverse gear being the most common option. A Wide Array Of Data To Use And Record The PDM32 receives, uses, and records data from the following: ECU (more than 1,000 protocols available) Digital/analog inputs Internal 9-axis EMU GPS position & lap times Expansions Push buttons on the RIO02 module or from any commercial CAN keypad, with simple configurability of CAN protocols Current & status of all power outputs Other user-defined math channels AiM PDMs come with 4,000 tracks in their database and automatically select the one you are driving on, in order to calculate Lap Time when you pass the start/finish line. An internal datalogger is available, capable of recording all the analog inputs, digital inputs, ECU channels, GPS values, current and status of all power outputs.

AiM MXP 6" TFT Dash & Data-Logger 50% Bigger Display Than MXS in a Similar-Sized Package This brilliant dash logger from AiM features a stunning high-contrast color 6" TFT display, an integrated LED shift array, configurable multicolor LED alarms, drag and drop multi page configuration, Wi-Fi and USB connectivity, included GPS08 Module, inertial platform, analog and digital inputs, digital outputs, Motorsport connectors, 4 GB of internal memory, 1,000Hz per channel sampling and support for over 1,000 ECU connections! That all adds up to an incredibly flexible, powerful, and useable information center at your fingertips in your race car. WIDE RANGE OF DATA SOURCES The AiM MXP samples data coming from your ECU, the GPS Module, its internal nine-axis inertial platform (accelerometer, gyro and magnetometer), eight fully configurable analog inputs, six digital inputs, predefined math channels and a second CAN. Performance info and data acquired can be expanded by adding up to eight expansion modules. CONFIGURABLE PAGES You can define all the custom pages you wish, choosing from a wide library of page styles, defining which data to be shown, their end of scale and units of measure. Swapping between pages is as simple as pushing one or two buttons! FLEXIBLE ALARMS AND ICONS The MXP features five configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one (and the flashing frequency), choose to have an accompanying text message, and set alarm priorities. You can also choose the street icons you need from a large list in Race Studio 3 - Icons Management, then set them up any way you prefer. They're all fully configurable, and if that's not enough, you can upload and set-up your own customized icons! TWIN DIGITAL OUTPUTS MXP features two digital outputs. They can be configured to respond to the analog or digital inputs to automatically run external systems (e.g. to switch on/off additional lights, activate/de-activate a cooling fan or fluid circulation pumps, etc.) DUAL CAMERA INPUTS Two analog camera inputs are available to swap your display into a mirror camera or rear-view camera through either push button command or in response to certain programmable events. Especially useful in a race car with limited visibility/sightlines. SHIFT LIGHT ARRAY Choose from a host of advanced multicolored RGB shift light patterns that can be customized as you like, including RPM settings for each individual gear. WiFi CONNECTIVITY It's so convenient to configure, calibrate, and download your data wirelessly using a secure 802.11 WiFi connection. No need to move your PC close to the vehicle anymore, you can do it from your trailer or tow vehicle up to 60 yards away. KEY FEATURES & SPECS: Manufacturer: AiM Sports Manufacturer part numbers Standard GPS Version: XA6MXPAxxG1 Roof Mount GPS Version: XA6MXPAxxR1 Display: 6" high-contrast color TFT Display resolution: 800x480 pixels Dimensions: 7.5" x 4.2" x 1.0" Housing: anodized aluminum Inertial platform: internal 3 axis ±5G accelerometer + 3 axis gyro max 100 Hz ECU connection: CAN, RS232, or K-Line (accepts over 2,000 industry-leading ECUs) Analog/digital inputs: 8 fully configurable, max 500 Hz each Digital inputs: speed inputs (4), lap signal (1), coil RPM input (1) CAN connections: 37-pin Deutsch male 22-pin Deutsch male 5-pin Binder 712 female Shift light LEDs: 10 configurable RGB Alarm LEDs: 5 configurable RGB Weight: 640g (1.4 lbs) Internal memory: 4GB Power consumption: 400mA Waterproof: IP67 ALL KITS INCLUDE: AiM MXP dash data-logger GPS09C module with cable USB cable Wiring harness with 37-pin connector User manual & RaceStudio 3 software, downloadable here

AiM MXS 1.3 Color TFT 5" Dash And Data Logger The MXS 1.3, the evolution of MXS, is a beautifully executed compact dash/data logger designed to put data at your fingertips. It can acquire data from your ECU, its internal accelerometer and gyro, the included GPS08 Module, analog/digital inputs and pre-defined math channels. The incredibly sharp, full-color TFT display puts it all front-and-center, in incredible color with a high contrast ratio. It even automatically adjusts its backlight based on ambient light to optimize visibility. Freely configurable pages let you define all the custom pages you wish, choosing from a wide library of page styles and defining which data to display, their end of scale and units of measure. Swapping between pages is as easy as pushing a button! INCLUDES THE AiM GPS09c GPS MODULE Thanks to the included GPS09c Module and AiM's Race Studio 3 software, you can immediately get lap times along with all data needed for engine tuning, shaking down car and driver, and for improving and refining driving technique. A MULTITUDE OF DISPLAYS TO SUIT YOUR NEEDS AND STYLE The AiM MXS 1.3 displays your RPM scale plus all the data you need (speed, water temp, oil pressure, lap times and much more) in pre-configured pages. Or you can customize pages as you wish, choosing from a wide library of page styles and defining which data to be shown, their end of scale and measure units. Swapping between pages is quite easy using push buttons. A 4GB non-volatile memory stores hours of information for detailed race data analysis using AiM's Race Studio 3 software. All data can be downloaded to your computer using a built-in secure Wi-Fi connection (no cable required). AiM MXS 1.3 GIVES YOU LOTS OF INPUT/OUTPUT FLEXIBILITY Eight fully-configurable analog input channels can sample, log, and display a wide range of temperatures, pressures, and potentiometers (throttle position, steering wheel position, etc). CAN inputs allow you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (sold separately). These hubs let you connect other inputs such as the AiM Lambda Controller (O2), an AiM SmartyCam, or AiM channel expansion hubs, all without using any analog channels. A separate CAN output allows you to send messages to your car's CAN network, adding vehicle system control possibilities! The AiM MXS 1.3 can also be connected to many different ECUs to log data gathered by each ECU. An internal three-axis accelerometer, gyroscope, and magnetometer, an AiM GPS09c input, four wheel-speed channels, a lap time receiver input, and two digital outputs add up to a flexible, expandable data-logger that can grow with you. It even has a screw-in port to add analog cameras used for back-up or rear view in visibility-challenged race cars! USER PROGRAMMABLE SHIFT LIGHTS & ALARMS Flexible alarms on the AiM MXS 1.3 include six configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. The integrated shift light array features a host of advanced multicoloured RGB shift light patterns that can be customized as you like, including RPM max for each individual gear. TWO DIGITAL OUTPUTS The AiM MXS 1.3 features two digital outputs (low-side type, switch to ground) that can be configured to activate/deactivate external systems (switch on/off additional lights, cooling fan relays, fluid circulation pumps, etc.) based on those inputs. WiFi CONNECTIVITY A secure 802.11 WiFi connection makes it even more convenient to configure, calibrate, and download the data from your AiM MXS 1.3 wirelessly! No need to move your PC close to the vehicle anymore, you can do it from your trailer or tow vehicle up to 60 yards away. AiM MXS 1.3 DASH & DATA LOGGER DETAILS: Manufacturer: AiM Technology Group Manufacture base part no.: XA2MXS12A Compact 6.5" x 3.8" x 0.9" anodized aluminum housing 5" TFT high-contrast color display Screen resolution: 800x480 pixels Internal memory: 4GB Inertial platform: Internal 3-axis ±5G accelerometer + 3-axis gyro max 100 Hz ECU connectors: CAN, RS232, or K-Line (OBDII) Analog/digital inputs: 8 fully configurable, max 500 Hz each Digital inputs: 4 speed inputs, lap signal, coil RPM input Digital outputs: 2 (1 Amp max each) Connectors: two motorsport connectors, one binder connector Ambient light sensor Power consumption: 400 mA Weight: 1.2 lb. (530g) Waterproof: IP67 AiM MXS 1.3 DASH & DATA LOGGING KIT INCLUDES: AiM MXS 1.3 unit GPS09c module with cable USB cable 37-pin standard Deutsch-connector harness Race Studio 3 software User manual All other sensors and modules sold separately.

AiM Power Distribution Module PDM32 Kit w/ 6" Display (Race Version) The AiM PDM32 Power Distribution Module is designed to distribute power to multiple circuits on your vehicle, replacing traditional fuse & relay systems. The 6-inch TFT display puts an enormous amount of information arranged neatly before you. It does not have traditional street car icons (for battery, parking brake, windshield wipers, etc.) AiM Power Distribution Module PDM32 Kit w/ 6" Display - No Icons Details Manufacturer: AiM Sports Manufacturer Part Number: XC1PDM32D06-C2NI Includes 6" display w/o icons: Yes Includes choice of GPS module: Yes 28 high side outputs Four half-bridge outputs Replaces traditional fuse & relay systems AiM PDMs are housed in an anodized billet aluminum case are designed specifically for the rigors of motorsport, and include a complete professional data logger & internal dash controller. Using an AiM PDM at the center of vehicle electronics greatly simplifies your wiring harness and electronics installation while providing much more control. AiM PDM32 Has An Expansive Feature Set AiM's PDM32 also offers some interesting features that you wouldn't necessarily expect to see in a traditional distribution module, such as: ECU connection for logging data, eliminating the need to add another data logging unit to your car GPS module compatibility for lap timing (GPS module sold separately) Dash controller for managing the 6" or 10" PDM dash displays (displays available separately) 9-axis EMU platform Mirror camera control for adding a reverse camera to the PDM dash display (camera & display available separately) The PDM32 offers four different power output configurations: 4 rated up to 20 A (high power) 12 rated up to 15 A (mid power) 12 rated up to 10 A (low power) 4 rated up to 35 A (Half Bridge) Protected for over voltage, under voltage, over current, & over temperature Total max current: 120 A Each output provides status feedback for open circuit, short circuit, high temperature, over current, under voltage, & over voltage. Inrush current, number of fault retries, & time between retries are all definable. All the outputs are configurable as PWM (pulse-width modulation) and allow soft start/stop. For every output, a multicolor LED shows the status: Enabled/disabled Activated or not Fault An elegant visual interface allows flexible and powerful configuration for every power output. Some "black boxes" are available for simplifying the configuration. For example, the Wiper may be managed by the LIN connection or using the Half Bridges. The AiM PDM32 features the following input channels: Analog/digital: 8 Only digital: 4 Speed: 2 If configured as Analog inputs, it is possible to activate an internal 2K Ohm resistor for connecting most of the sensors directly. If configured as Digital inputs, it is possible to activate a 10 kΩ Pull Up or a 10 kΩ Pull Down. The PDM32 supports the latest 6" & 10" TFT displays, fully configurable with Race Studio 3. It also features two analog camera inputs that allow you to swap your display into a mirror camera with the press of a button or through configurable event logic- reverse gear being the most common option. Use And Record Data From Multiple Sources The AiM PDM32 receives, uses, & records data from the following sources: ECU (more than 1,000 protocols available) Digital/analog inputs Internal 9-axis EMU GPS position & lap time Expansions Push buttons on the RIO02 module or any commercial CAN keypad, with simple configurability of CAN protocols Power outputs current levels & status Other user-defined math channels AiM PDMs come with 4,000 tracks in their database and automatically select the one you are driving on, in order to calculate Lap Time when you pass the start/finish line. An internal data-logger is available, capable of recording all the analog inputs, digital inputs, ECU channels, GPS values, currents, & status of all the power outputs.

AiM Power Distribution Module PDM32 Kit w/ 6" Display (Road Icons) The AiM PDM32 Power Distribution Module is designed to distribute power to multiple circuits on your vehicle, replacing traditional fuse & relay systems. The 6" TFT display neatly arranges an incredible amount of information right in front of you. This version includes traditional street car icons (parking brake, windshield wiper, battery, etc.) AiM Power Distribution Module PDM32 Kit w/ 6" Display - Road Icons Details Manufacturer: AiM Sports Manufacturer Part Number: XC1PDM32D06-C2 Includes 6" display w/ road icons: Yes Includes choice of GPS module: Yes 28 high side outputs 4 half-bridge outputs Replaces traditional fuse & relay systems AiM PDMs are housed in an anodized billet aluminum case are designed specifically for the rigors of motorsport, and include a complete professional data logger & internal dash controller. Using an AiM PDM at the center of vehicle electronics greatly simplifies your wiring harness and electronics installation while providing much more control. AiM PDM32 Boasts A Broad Feature Set AiM's PDM32 also offers some interesting features that you wouldn't necessarily expect to see in a traditional distribution module, such as: ECU connection for logging data, eliminating the need to add another data logging unit to your car GPS module compatibility for lap timing (GPS module sold separately) Dash controller for managing the 6" or 10" PDM dash displays (displays available separately) 9-axis EMU platform Mirror camera control for adding a reverse camera to the PDM dash display (camera & display available separately) The PDM32 offers four different power output levels: 4 rated up to 20 A (high power) 12 rated up to 15 A (mid power) 12 rated up to 10 A (low power) 4 rated up to 35 A (Half Bridge) Protected for over voltage, under voltage, over current, & over temperature Total max current: 120 A Each output provides status feedback for open circuit, short circuit, high temperature, over current, under voltage, & over voltage. Inrush current, number of fault retries, & time between retries are all definable. All the outputs may be configurable as PWM and allow soft start/stop. For every output, a multicolor LED shows the status: Enabled/disabled Activated or not Fault An elegant visual interface allows flexible and powerful configuration for every power output. Some "black boxes" are available for simplifying the configuration. For example, the Wiper may be managed by the LIN connection or using the Half Bridges. Multi-Configurable Input Channels The AiM PDM32 features the following input channels: Analog/digital: 8 Only digital: 4 Speed: 2 If configured as Analog inputs, it is possible to activate an internal 2K Ohm resistor for connecting most of the sensors directly. If configured as Digital inputs, it is possible to activate a 10K Ohm Pull Up or a 10K Ohm Pull Down. The PDM32 supports AiM's latest 6" & 10" TFT displays, fully configurable with Race Studio 3. It also features two analog camera inputs that allow you to swap your display into a mirror camera with the press of a button or through configurable event logic (reverse gear being the most common option). AiM PDM32 Receives And Records Multiple Data Sources The PDM32 receives, uses, & records data from the following sources: ECU (more than 1,000 protocols available) Digital/dnalog inputs Internal 9-axis EMU GPS position & lap time Expansions Push button inputs from the RIO02 module or from any commercial CAN keypad, with simple configurability of CAN protocols Current load & status of all power outputs Other user-defined math channels AiM PDMs come with 4,000 tracks in their database. The PDM32 will automatically select the one you are driving on and begin recording your lap time when you pass the start/finish line. An internal data-logger is available, capable of recording all analog inputs, digital inputs, ECU channels, GPS information, current load and status of all power outputs.

AiM Track Day Kit SmartyCam 3 Sport + Solo 2 DL Elevate your track day experience with the ultimate racing companion: the AiM SmartyCam 3 Sport & Solo 2 DL with Double Bracket Track Day Kit. Engineered for performance, precision, and convenience, this innovative system combines the cutting-edge video technology of the SmartyCam 3 Sport and the rich data-logging of the Solo 2 DL into a double-bracket setup, ensuring you capture every heart-pounding moment on the track. The SmartyCam 3 Sport boasts unparalleled video quality, capturing crystal-clear footage of your racing endeavors in stunning HD. With its advanced data overlay capabilities, you can analyze crucial metrics such as speed, lap times, G-forces, and more, providing invaluable insights to help you fine-tune your driving technique and shave seconds off your lap times. Whether you're a seasoned racer or just starting out, the SmartyCam 3 Sport Sport empowers you to take your performance to the next level.Paired with the Solo 2 DL, a powerful GPS lap timer and data logger, this bundle offers comprehensive data analysis to optimize your racing performance. With its intuitive interface and customizable display options, the Solo 2 DL provides real-time feedback on your driving metrics, allowing you to make instant adjustments and maximize your track day experience. Plus, with the included double bracket trackday kit, you can easily mount both devices in the optimal position for capturing every angle of the action.Don't settle for anything less than the best when it comes to recording and analyzing your track day performance. Invest in the AiM SmartyCam 3 Sport & Solo 2 DL with Double Bracket Track Day Kit and unleash your full potential. Whether you're chasing podium finishes or simply seeking to improve your skills, this top-of-the-line system is the ultimate tool for any serious racer. Gear up, hit the track, and let the SmartyCam 3 Sport & Solo 2 DL elevate your racing experience. AiM Track Day Kit Includes: AiM Solo2 DL w/ OBDII connector AiM SmartyCam 3 Sport, 67º FOV or 84º FOV Suction cup mount to hold both devices All necessary cables AiM Solo 2 DL w/ OBD2 More Than 4,000 World Tracks Fully Loaded The AiM Solo 2 DL has access to over 4,000 race tracks from all over the world. As soon as you turn it on at the track, your Solo 2 DL identifies your exact position, recognizes the official track starting-line coordinates, and prepares to auto-record your lap times. SmartyCam Smart Integration and Control Your Solo 2 DL will seamlessly control the connected SmartyCam 3 Sport with no need for driver inputs. Your Solo 2 DL does all the work! This integration also makes it simple to overlay your engine and performance data directly into your on-track videos. Race Mode Selection The amazing AiM Solo 2 DL can manage four different types of racing: closed-circuit races (e.g., road race, circle track); point-to-point races like hill climbs or autocross; performance tests such as 0-60mph, 0-100-0mph; and a user-customized area or course. WiFi Download Download via WiFi to any WiFi-enabled device. There are no cables to lose or forget at home.  On-Screen Data Recall The AiM Solo2 DL lets you do a post-session review right out of the car on the built-in screen. It's perfect for driving coaches to do quick reviews with students. AiM Solo2 DL Details Manufacturer: AiM Sports Manufacturer part no: X47SOLO2DL01U0 Display resolution: 128 x 64 pixels Display pages: 8 freely configurable Backlight: 7 RGB colors Shift lights/alarms: 10 user-configurable RGB LEDs Integrated track database: Yes Inertial platform: internal three-axis 5G accelerometer + three-axis gyro + three-axis magnetometer WiFi connection: Yes GPS sampling rate: 10Hz ECU connection: OBDII cable Connectors: Binder 712 5-pin (1), Binder 712 8-pin (1) Internal memory: 4 GB Battery type: Lithium rechargeable Dimensions: 98 x 74 x 30mm (3.9 x 2.9 x 1.2 in) Weight: 240 g (8.5 oz) w/ battery Waterproof: IP67 AiM SmartyCam 3 Sport Changes Racing Video SmartyCam 3 Sport has been designed to minimize the problem of image distortion (the dreaded wave effect) with its global shutter CMOS sensor. The camera shutter captures the entire image all at once, resulting in images that are not affected by the vibration of high-speed driving on track. The SmartyCam 3 Sport Sport has a choice of low-distortion lenses with a fields-of-view of either 67º (perfect for closed-cockpit cars) or 84° (wider for open-cockpit and open-wheel cars). AiM SmartyCam 3 Sport Video Camera Details Manufacturer: AiM Sports Manufacturer part number: 67º FOV: XS3S674U 84º FOV: XS3S844U Cable length: 4m (13.1 ft) Cable connector: Binder 712 5-pin male Camera connector: Binder 712 5-pin female (1) Audio: internal microphone The AiM SmartyCam 3 Sport automatically overlays videos with the data you need: speed, RPM, lap number, gear shifts, and much more. Simply choose the data and graphical layout you prefer from AiM's huge selection of overlay styles. Even More Data From The AiM Solo 2 DL The SmartyCam 3 Sport can overlay ECU data from your AiM Solo 2 DL such as RPM, throttle position, engaged gear, acceleration, temperatures and pressures, and a bevy of other data from any added sensors you have installed. All the info you choose is overlayed on videos at every point of the track. The AiM SmartyCam 3 Sport integrates seamlessly with RaceStudio 3, AiM's powerful software that lets you configure and edit all the details of your race videos. RaceStudio 3 makes it easy to maximize the fun and learning you get from reviewing your race. You can customize your videos in virtually unlimited ways. Add your team or shop logo, add graphical objects from a long list of pre-built sets, even mix-and-match objects from different sets. Your videos will be truly be yours down to the last detail! Post-Race Video Analysis Helps You Get Faster Download the video of a whole session to your PC and, with a simple click, split it into individual videos of each lap. RaceStudio 3 lets you watch two laps side-by-side to see where you're faster or slower. In fact, you can simultaneously watch any two SmartyCam lap videos (recorded on the same track). So you can compare your best laps from different days, with different drivers, and so on! A Motorsports Camera Is Not Just A Sporty Camera A video camera and lens specifically designed for motorsports must be robust, maintaining excellent picture stability, resolution and brightness despite the high speeds, vibration and noise inherent in racing. Above all, a lens designed for motorsports must avoid the image distortion typical of lenses used by generic action-cameras where objects at just 10 meters distance can look far away. This makes it nearly impossible to accurately review race videos. The AiM SmartyCam 3 Sport features a telecentric lens with six elements to reduce distortion to a minimum and will withstand race track vibration and abuse for years. AiM offers lenses with different fields-of-view to give your videos tailor-made framing in all kinds of vehicles.

Aim MX2E Plug & Play Dash Logger Kit For Lotus Elise/Exige Aim MX2E Plug & Play dash logger and cluster upgrade kit is specifically designed for Lotus Elise/Exige. If you are installing this kit in a 2008+ model year car, it will connect directly to your factory harness without any adapter. If using this in a 2004-2007 Lotus Elise/Exige, you will need to select the adapter harness for the older chassis in the drop-down above. Aim MX2E For Lotus Elise/Exige Details: Manufacturer: AiM Technologies Manufacturer Part Number: XA6MXPLEE0 Fully replaces factory gauge cluster: Yes Includes Cluster Hood: Yes Includes AiM GPS antenna: Yes Expandable input channels: Yes The display can function as a rearview camera: Yes Wi-Fi connectivity: Yes Need adapter cable for 2008+: No Need adapter cable for 2004-2007: Yes

AiM Sports SmartyCam 3 GP The AiM SmartyCam 3 GP motorsports video camera has been designed specifically for racing with two purposes in mind: provide great videos, and supply you with all the information and data you need. The AiM SmartyCam 3 GP camera overlays any data you want from both GPS and AiM data-loggers connected to your ECU. Full HD camera system, Video output, CAN connection, USB-C connection, and GPS port are only a few of the features of SmartyCam 3 GP: the power of simplicity. Video recording format: H.264, 1920x1080 pixels @ 60 FPS Display resolution: 2.4" (240 x 320 pixels) Lens: low distortion camera lens CMOS sensor: Global Shutter Field of view: 67°, 84°, or 120° Internal battery: rechargeable lithium-ion Video Out: 3G-SDI External power: 9V to 15V Supports SD card: up to 2TB Connectors: Binder 712 female connectors (2), SMA female connector (1), USB-C (1) Usage temperatures: -10°C to +50°C (14ºF to 122ºF) Auto Power ON: Yes Auto Power OFF: Yes Auto Start/Stop Recording: Yes Body: anodized aluminium Dimensions: Main unit 120.8 x 80.2 x 30.9mm | Bullet camera 24mm diam x 46mm (120° lens) | Bullet camera 24mm diam x 41 mm (67° or 84° lens) Bullet Cable Length: seven different lengths available from 0.5m to 4.0m  Weight: Main Body 320g; Bullet Camera 45g Waterproof: IP65

AiM GS-Dash and EVO4S Data Logger Dash Display w/ GPS This Aim GS-Dash and EVO4S Data Logger and Racing Dash Display Kit has been designed to put data sampled by the new generation of AiM data-loggers, the EVO4S, right at your fingertips. That includes all data coming from your vehicle’s ECU, from the internal accelerometers and the GPS module, and from any custom sensors you have. Easy and Immediate Readability In its compact structure, AiM GS-Dash & EVO4S Racing Data Logger Kit features a wide 268x128 pixel display with excellent readability. The screen can be backlighted in one of the seven available colors and the incorporated light sensor keeps brightness and contrast ideal in all light conditions. Data can be arranged on up to nine separate pages that can easily be run through using the metallic buttons on the GS-Dash. Recall Your Session Highlights A key-data summary is available at the end of each session where you can also see a list of all the laps of the sessions, with their times, min/max speed and min/max RPM's. Configure Your LEDs One by One Five RGB shift lights can be configured for each gear, choosing LED color and RPM threshold values which will turn it on/off. Alarms are managed in a very flexible way: you can choose the situation that generates the alarm, the LED behavior (blinking frequency and color) when the alarm appears and the conditions for its switch-off. A warning message can also be shown. Easy Configuration Configuration of shift lights, alarms, and customized data pages is intuitive and immediate using the dedicated Race Studio 3 software. Shift lights and alarms must be configured using the RaceStudio 3 configuration panel. Data is viewed in customizable pages. With few clicks you can enable up to eight custom pages: you decide where to show the desired variables (up to four on each page) from those sampled by the ECU, the accelerometers and the GPS values from EVO4S. Configuration can be done either using RaceStudio 3 or via keyboard. Compact and Durable Chassis Its small dimensions make it particularly suitable for small cockpit installation (e.g., motorcycles or formula cars). Manufactured from anodized aluminum with an edge-to-edge glass screen and metallic push-buttons, the GS-Dash is robust and fully waterproof.

AiM MXG 1.3 Strada Color TFT Dash The Full-Size Color TFT Dash For Road Use MXG 1.3 Strada ("street" in Italian) is a beautifully-designed, feature-rich color digital dash display. It is basically the MXG 1.3 without the data-logging function. The MXG 1.3 Strada features a wide 7" High Contrast TFT color screen with great visual impact, configurable to show lap times, RPM, and a huge range of info coming from your Engine Control Unit, analog/digital inputs, pre-defined math channels and an optional GPS08 Module. Programmable multicolor shift and alarm LEDs round out an incredibly powerful package. The MXG 1.3 Strada displays your RPM, selected gear, speed, plus all the data you choose (water temp, oil pressure, trans temp, lap times and much more) in either pre-configured or user-customized pages. Swapping between pages is as easy as pushing buttons. Plus the MXG 1.3 Strada puts a huge amount of control over your car's systems at your fingertips. And you can choose the version with "Street Icon" LEDs in place of the standard LEDs! INPUT & OUTPUT FLEXIBILITY Eight fully configurable analog input channels can sample, log, and display a wide range of temperatures, pressures, and potentiometers (throttle position, steering wheel position, etc). Available only in a CAN/RS232 version for the maximum level of customization and data access. The CAN input allows you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (Part No. MC-329, sold separately). These hubs let you connect other inputs such as Lambda Controller (O2), SmartyCam, or even channel expansion hubs, without using any analog channels. A separate CAN output allows you to send messages to your car's existing CAN network, adding to the vehicle system control possibilities! ALARMS & SHIFT LIGHTS The ten multicolored RGB shift lights can be customized to define the max RPM for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them to turn on/off depending on analog or digital inputs, ECU values, expansion values, math channels or GPS information (with the optional GPS08). You choose conditions, colors, and select a solid alarm or flashing one (including flash frequency). It's also possible to configure an accompanying text message. DIGITAL OUTPUT The MXG 1.3 Strada features a low-side (switch to ground) digital output that can be configured to activate/deactivate external systems (switch on/off additional lights, cooling fan relays, fluid circulation pumps, etc.) based on those inputs. RACE STUDIO 3 MXG 1.3 Strada is configured using your PC and Race Studio 3. You can create, customize, delete, import and export configurations with all channels, ECU drivers, Math Channels, Display Pages, Digital Output, Alarms, Shift Lights and all the expansions you need. TECHNICAL SPECS: 9.3" x 5.0" x 1.0" Anodized Aluminum housing Large 7.0" high-contrast color TFT display 800x480 pixel screen resolution Weight 2.1 lbs (950g) Waterproof IP65 KIT INCLUDES: MXG 1.3 Strada digital dash USB cable 14-pin standard wiring 23-pin connector + contacts Installation CD with Race Studio 3 software All sensors and modules sold separately.