Sparco Martini Racing Collection

Sparco Martini Replica Driver Race Suit In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best drivers in the world. Now this partnership is renewed, and fans of the Martini Racing historical livery have access to beautiful re-creations of the original Sparco products. All reproductions have been updated with the newest Sparco technologies and carry current FIA homologations. The Sparco Martini Racing replica race suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability and comfort when compared to the original. The suit features iconic Martini Racing embroideries and patches to faithfully recreate the original look. The Martini Racing replica race suit is made from the latest generation fabrics which offer a soft lightweight outer fabric and breathable inserts at the sides and a large lower back stretch panel for maximum comfort. It also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and the Sparco signature epaulettes. Available in sizes EU48-66 sizes. FIA 8856-2018 and SFI 3.2A/5 approved. SPARCO MARTINI REPLICA RACE SUIT DETAILS Authentic Martini Racing livery embroidered throughout  Lightweight three-layer construction Pre-curved arms for great comfort in the driving position Lightweight zipper and collar Strategically placed breathable mesh stretch panels Both FIA and SFI approved SKU 001144

Sparco Pro 2000 QRT Martini Racing Seat SIZE: Medium, up to a 34” waist (as measured) The Sparco Pro 2000 QRT Martini Racing Edition is a limited production seat. It features the Iconic Martini Racing stripes and is available in period correct Navy or Grey. The Sparco Pro 2000 QRT Martini Edition is designed for a medium size driver with a waist size up to 34 inches. The Pro Sparco 2000 QRT Martini Edition is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Sparco Pro 2000 QRT Martini Edition is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Sparco Pro 2000. The Sparco Pro 2000 QRT Martini Edition is a unique FIA seat as it can be bottom mounted in addition to the traditional side mounting. This gives additional installation options. EVOLUTION OF AN ICON  The  Sparco Pro 2000 QRT Martini Edition The Sparco Pro 2000 QRT is an evolution of Sparco's iconic Pro 2000 seat. The Sparco Pro 2000 QRT has been upgraded with new ergonomics and technology. It is designed for a medium size driver with a waist size up to 34 inches. The Sparco Pro 2000 QRT is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Sparco Pro 2000 QRT is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Sparco Pro 2000 QRT is FIA approved. WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process based on aerospace technologies.     QRT creates an unparalleled mechanical strength-to-weight ratio, generating the lightest fiberglass composite seat shells currently on the market. In fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. The  Sparco Pro 2000 QRT Martini Edition TECHNOLOGY QRT ultra-light fiberglass composite shell Excellent fitment into small cockpits Adjustable lumbar cushions Excellent ergonomics Fire retardant fabric FIA approved The  Sparco Pro 2000 QRT Martini Edition DIMENSIONS

Sparco Air Pro RF-5W 1977 Sparco Air Pro RF-5W 1977 Helmet: Vintage Vibes with Futuristic Safety Hey speedster, ever thought of time-traveling? Well, we can't quite offer you a DeLorean, but how about racing with the soul of the '70s and the tech of 2023? Dive into the Sparco Air Pro RF-5W 1977. This isn't just a helmet; it's a nod to history with the perks of the future! Back in the day, Sparco took its first baby steps. Fast forward 40+ years of wind tunnel hairdos, carbon-Kevlar hugs, and the relentless pursuit of perfection, and here we are! This baby is crafted with over four decades of research, development, and some serious love for the track. With the challenges of the new Snell SA2020 and FIA 8859-2015 standards, the Sparco team pulled up their sleeves (and goggles) to introduce innovations in safety and comfort. Oh, and did we mention? There’s a fresh Medium/Large size. So, if you’re ever in that in-between stage of ‘Is it snug? Or is it too tight?’—we gotcha! Now, Let's Break it Down: Retro Love: A painted retro design that screams 1977 with a clear coat finish. Choose from red or blue stripes, and let the raceway know you’ve got style. Rock-Solid Yet Light: Carbon-Kevlar/fiberglass combo, because your head deserves nothing but the best. Vents Galore: Designed with a wind-tunnel-honed aerodynamic edge, because why should your car have all the fun? No More Foggy Days: Multiple channels direct air to the visor ensuring you see the finish line (and the competition you leave behind) crystal clear. Comfort Is King: Removable, washable, and repositionable padding with no pesky seams to annoy your racer's soul. Extras? Yes, Please!: Accommodates drink tubes, an intercom system, and comes with those sleek anodized aluminum chin strap hardware. Oh la la! Specifications at a Glance: Painted Retro design - because we adore nostalgia. Light-weight carbon-Kevlar/fiberglass fusion for durability without the drag. The fantastic M/L size in our sleeker shell. All the bells and whistles: anti-fog channels, pre-molded interiors, and approval by SNELL SA2020 and FIA 8859-2015. Race enthusiasts, if you’re looking to grab a piece of history, turn heads at the track, and rock cutting-edge safety, the Sparco Air Pro RF-5W 1977 is your ticket to the winner’s circle. Ready to own the past and future wrapped in one stunning helmet? Race to 'Add to Cart' and set the tracks on fire, old-school style! The Sparco helmet line is a result of over 40 years of research and development experience, including wind tunnel testing. The new range was designed to meet the requirements of the new Snell SA2020 and FIA 8859-2015 ratings. The 2020 type-approval introduces new impact requirements, the helmets need to dissipate large amounts of energy in different ways. To meet these requirements Sparco is introducing new innovations for driver safety and comfort. All shells now have layers of carbon-Kevlar for greater strength. The helmets have also been wind-tunnel tested to maximize exterior vent placement and flow. The EPS interiors and padding have also been redesigned for increased airflow and driver comfort. Sparco also introduces a new size: Medium/Large. This M/L size takes advantage of using the smaller shell which is lighter and more compact. SPARCO AIR PRO 1977 AUTO RACING HELMET The Sparco Air Pro 1977 is a painted version of the Sparco Air Pro RF-5W. This retro inspired helmet has a white base with blue or red stripes and has a clear coat painted over. The Sparco Air Pro 1977 features a carbon-Kevlar/fiberglass construction. It includes a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase circulation to a redesigned interior. The interior has channels which not only cool the driver, but has additional channels which route air towards the visor, which reduces the chance of visor fogging. The Sparco Air Pro 1977 has removable, washable padding that can be repositioned for a comfortable fit. All interior seams have been removed from areas where greater pressure is exerted on the head. The Sparco Air Pro 1977 has been designed to accommodate a drink tube and an intercom system. Available in white with blue or red stripes. Sizes XS to XXL (including size M/L). Sparco Air Pro 1977 has Hans clips pre-installed. SNELL SA2020 and FIA 8859-2015 approved. SPARCO AIR PRO RF-5W TECHNOLOGY Painted Retro design Light-weight carbon-Kevlar/fiberglass construction New Medium/Large size which uses the lighter and more compact shell Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Pre-molded interior to accommodate drink tubes and an intercom system SNELL SA2020 and FIA 8859-2015 approved An effective helmet is one that fits properly. Have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head, starting at a point about an inch above the eyebrows and around a point in the back of the head that results in the largest measurement, finally wrapping back around to the front. It's a good idea to take a few measurements and order your helmet based on the largest. We take immense pride in offering a wide selection of Sparco auto racing helmets, designed to meet the demands of professional racers and motorsports enthusiasts alike. Sparco has been at the forefront of helmet innovation and safety for decades, earning a reputation as a top-tier brand in the racing world. Key Features of Sparco Racing Helmets: Unparalleled Safety: Sparco racing helmets are engineered to the highest safety standards, including certifications like Snell and DOT approval, ensuring your head is well-protected in high-speed racing conditions. Premium Materials: Crafted with precision, Sparco helmets feature carbon fiber construction, making them lightweight yet incredibly strong for maximum protection. Comfort and Fit: Sparco's commitment to comfort is evident in the design of their helmets. They offer a range of sizes, and many models have customizable padding to ensure a snug fit. Aerodynamic Design: Sparco helmets are designed with aerodynamics in mind, reducing wind resistance and enhancing performance on the track. Frequently Asked Questions About Sparco Helmets: Where are Sparco helmets made? Sparco helmets are proudly manufactured in Italy, maintaining the highest quality standards. Is Sparco a good helmet brand? Yes, Sparco is renowned for its commitment to safety, innovation, and performance, making it a trusted choice among professional racers and enthusiasts. Are Sparco helmets Snell approved? Yes, many Sparco helmets are Snell approved, meeting rigorous safety standards. Are Sparco helmets FIA approved? Absolutely, several Sparco helmets are FIA 8860-2018 certified, ensuring they meet the most stringent safety requirements. Do Sparco helmets run small? Sparco offers a variety of sizes and often provides sizing charts to help you choose the right fit. It's important to measure your head and refer to their guidelines for a proper fit. For racers who demand the best in safety and performance, Sparco auto racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs. Sparco Racing Helmets: Sparco Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Sparco Racing Helmet to suit your racing needs. Sparco Racing Helmet: Each Sparco Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Sparco Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track. Sparco Race Helmets: Sparco Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Sparco has race helmets tailored for your specific discipline. Sparco Race Helmet: Your Sparco Race Helmet is more than just protective gear; it's a crucial part of your racing ensemble. The aerodynamic design of a Sparco  Race Helmet helps reduce wind resistance, giving you a competitive edge. Sparco Helmet: A Sparco Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Bell Helmets provide during intense racing conditions. Sparco Helmets: Sparco Helmets have a rich history of innovation and excellence. The extensive range of Sparco Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport. Sparco Carbon Fiber Helmet: Sparco Carbon Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort. Race Car Helmet: A race car helmet is a fundamental piece of safety gear for any racer. Sparco's race car helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track. Racing Helmet: Your racing helmet is your shield against potential accidents. Sparco Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation. Racing Helmets: Racing helmets are a racer's best friend. Sparco Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community. Sparco Racing: Sparco Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology. Auto Racing Helmet: When it comes to auto racing, your helmet is your first line of defense. Sparco Auto Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected. Auto Racing Helmets: Auto racing helmets from Sparco are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.

Sparco Martini Racing Top Shoe In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best drivers in the world. Now, with this renewed partnership, fans of the Martini Racing historical livery have access to reproductions of the original Sparco products. All reproductions have been updated with the newest Sparco technologies and carry current FIA homologations. The Sparco Martini Racing Top shoe is made with high-quality suede and is embroidered with the classic Martini Racing stripes. It offers superior fire protection, breathability and comfort when compared to the original. The Martini Racing Top shoe features a wide Velcro strap for greater ankle support and guaranteed fit and hold. The outer sole is anti-static and oil/fuel resistant and utilizes anti-slip technology for greater pedal feel. A balance point on the heel improves driving sensitivity. Available in black, blue and red in sizes from 37 to 48. The Martini Racing Top is FIA approved. SPARCO MARTINI RACE SHOE FEATURES: Martini Racing embroidery Suede upper with adjustable ankle strap Breathable lining Balance point at the heel for improved comfort while driving Sole design allows for both maximum comfort and pedal grip Anti-static, fuel- and oil-resistant sole FIA approved

Sparco Martini Racing Land Nomex Glove In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best drivers in the world. Now, with this renewed partnership, fans of the Martini Racing historical livery have access to reproductions of the original Sparco products. All reproductions have been updated with the newest Sparco technologies and carry current FIA homologations. The Sparco Martini Racing Land glove provides excellent protection and feedback. The classic design features Martini Racing and Sparco logos in “period correct” embroidered patches. The palm features an ergonomic design with reinforced stitching that conforms to the hand’s position. The glove has anti-slip suede fingertips and provide grip and feedback. The elastic wrist and wide range of sizes helps ensure proper fitment. Colors: Navy or Red. The Martini Racing Land is FIA approved. SPARCO MARTINI LAND RACING GLOVE TECHNOLOGY Period-correct embroidered Martini Racing patches Ergonomic palm design with reinforced stitching conforms to the hand’s position Suede grip for finger tips and palm Elastic wrist support FIA approved