Racing Seats

Sabelt GT-635 Carbon Fiber Racing Seat for Ferrari Challange Through the years, the Sabelt GT-635 racing seat design is known as the OEM fitment for Ferrari Challange race cars. The latest Sabelt GT-635 racing seat was developed in partnership with the fastest teams in both Ferrari Challange series and GT Championships. The result is a racing seat that's both light weight and incredibly comfortable. Offered in Medium, Large or XL to accommodate a wide range of drivers, the GT-635 is beautifully constructed and upholstered to offer excellent support and breathability. The GT-635 carbon seats flat bottom and specific back inclination design provides proper fitting suitable for either circuit and rally cars. The shell has undergone extensive studies and trials to be the most ergonomically optimal position for the driver. The DCT halo offers invaluable head protection. The double shoulder harness slots improve the fitting of different drivers torso heights. The carbon fiber shell is available in two sizes: M (small shell,) and L/XL (big shell.) The fire retardant anti-slip fabric with improved grip on specific key areas also features improved comfort thanks to 3D breathable mesh materials and high density foam. The GT-635 is available for use with FIA certified sliders (circuit only) or fixed brackets (GT/rally/circuit). Be sure to select the correct model from the drop down menu for your specific application. The sliders and brackets are sold separately. FIA 8862-2009 certified.

Sparco ADV XT Carbon Racing Seat The Sparco ADV XT is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating, FIA 8862-2009. This means the Sparco ADV XT has been tested to an impact of approximately 70G. This rating is required for GT racing, and the Sparco ADV XT was specially designed with a more relaxed, comfortable driving position for GT cockpits. With strength at the top of its class, the Sparco ADV XT can withstand over 6,600 lbs. of lateral force. The Sparco ADV XT has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric, plus a special non-slip fabric in the shoulders and seat area. The Sparco ADV XT is FIA approved when mounted with the Sparco #0049605 side-mount brackets. Sparco ADV XT Carbon Racing Seat TECHNOLOGY: Ultra-light weight Carbon Fiber construction FIA 8862-2009 approved Testing to an impact of 70G Designed for GT cockpits and driver position HANS device compatible Fire retardant fabric Special non-slip fabric Sparco ADV XT Carbon Racing Seat DIMENSIONS:

Sparco Racing Seats ADV Elite Carbon Seat The Sparco ADV Elite Carbon is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating FIA 8862-2009. This means that the Sparco ADV Elite Carbon seat has been tested to an impact of approximately 70G. This rating is required for WRC racing, and the Sparco ADV Elite Carbon seat was specially designed with an upright driving position preferred by Rally drivers. In addition to the Rally driving position, the outer dimensions have been reduced to fit into typically smaller WRC cockpits. With strength at the top of its class, the Sparco ADV Elite carbon seat can withstand over 6,600 lbs. of lateral force. The Sparco ADV Elite carbon seat has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric and special non-slip fabric in the shoulders and seat area. The Sparco ADV Elite carbon seat is FIA approved when mounted with the Sparco #004988ADV side-mount brackets. Sparco Racing Seats ADV Elite Carbon TECHNOLOGY Ultra-light weight Carbon Fiber construction FIA 8862-2009 approved Testing to an impact of 70G Designed for WRC Rally cockpits & driver position Hans device compatible Fire retardant fabric Special non-slip fabric Sparco Racing Seats ADV Elite Carbon DIMENSIONS

Recaro P1300 GT LW Light Weight Racing Seat THE NEXT EVOLUTIONARY STEP Always on the cutting edge of racing seat technology, Recaro's P1300 GT LW is the first racing seat receive FIA certification with a sliding seat adapter (fore/aft adjustment). By continuously optimizing their entire production process, Recaro have improved their top-of-the-line racing shell (the P1300 GT) by 11%. The result is the new P1300 GT LW, combining low weight, maximum safety and individual comfort to place it at the top of the premium racing seat category. Despite its lower weight, this racing shell meets the FIA 8862-2009 standard for "Advanced Racing Seats" and can be adjusted fore-aft thanks to the flexible side mount available in standard and XL sizes. Interchangeable pads available in three sizes plus the optional flexible side mount provide drivers with a maximum of individual fitting possibilities. This customizability makes the P1300 GT LW ideally suited for racing applications with frequent and fast driver changeovers. The Recaro P1300 GT LW is homologated for use in GT and touring car sport.   RECARO P1300 GT LW RACING SEAT SPECIFICATIONS Certified according to FIA 8862-2009 (Advanced Racing Seat) Recaro high-integrity, lightweight, Carbon-Kevlar® carbon fiber reinforced polymer (CFRP) comfort shell FIA certified and crash tested for 10 year’s use in FIA-sanctioned races Includes the P1300 GT flexible adapter, an FIA-certified sliding seat adapter system Side-impact neck protection, developed and optimized in cooperation with HANS to work with head and neck safety systems Recaro proprietary ergonomics: S-shaped backrest with “built-in” lumbar support that protects against spinal compression in high-impact accidents Aggressive thigh & torso bolstering High-quality, shock-absorbing foam in flexible pad system Highly flame-retardant upholstery materials (ISO 3795) Screw-mounted panels and belt slots Suitable for 4, 5, or 6 point harness Recaro P1300 GT LW Accessories Flexible side mount Pad Kits: S, M, M Mid, and L offer replaceable pads for drivers of small, medium, or large build Lumbar pad Side support pads Helmet support pads Recaro P1300 GT LW pictured with several optional accessories (sold separately).

Racetech RT9119 Lightweight Racing Seat Building upon the successful 129 series, the Racetech RT9119 racing seat offers the same ergonomic form and incredible features in a lighter and more protective package. Used by many professional teams at both the national and international levels, this is the lightweight version using a precise combination of carbon and Kevlar hybrid weave to achieve a shell weights as low as 9.9 lbs. (4.5kg). Four sizes are available: Standard, Wide, Tall, and Wide & Tall. You can further customize your seat with low-profile base cushions, or by adding side cushions for support in the thigh area. Racetech 119-Series seats (except the WHR) are compliant with FIA 8855-1999 standards1. Racetech RT9119 Lightweight Racing Seat BRACKETS AND MOUNTING OPTIONS: Side mount to the floor using the Racetech RTB1009M 5mm aluminum brackets (available in the drop-down above). Back mount using the RTB2115B bracket in conjunction with the RTB2005C clamps. The RTB2115B is a 5mm aluminum bracket that bolts directly to the shoulder beam of the seat. The RTB2005C clamps bolt to the RTB2115B and come in three variants: 11/2 inch (38mm), 15/8 inch (41mm), or 13/4 inch (45mm) ID to suit your roll cage tubing diameter. Note 1: In order to comply with FIA 8855-1999, Racetech 119-Series seats must be back-mounted to the roll cage at shoulder level. Back-mounting improves seat strength and stability during an impact, increases driver feel, and reduces driver fatigue. Racetech RT9119 Lightweight Racing Seat FEATURES: Gel-coat cear self-finish. Seat cover in black fire-retardant fabric. Wear patches black perforated leather. FIA homologation FIA 8855-1999 approved (except RT9119WHR). Shell constructed of Kevlar/carbon. Shell weight from 9.9l bs. (4.5 kg). Integrated air ducting is vented to the driver's lower back. Back-mount compatible. Racetech RT9119 Lightweight Racing Seat SIZES: Standard (HRW) Wide (WHR) Tall (THR) Wide & Tall (WTHR)

Recaro Pro Racer SPA Racing Seat FOR PROS WHO LIKE TO WIN The tough, lightweight Pro Racer SPA is Recaro's top product for GT and touring car racing. It provides optimal body support during high g-forces, lightweight with its CarbonKevlar® composite shell, plus great long-term driver comfort and safety. That adds up to a competitive edge in driving performance. The Pro Racer SPA’s ergonomic S-shaped shell fits the natural curve of your spine, providing “built-in” structured lumbar support that protects against spinal compression in high-impact accidents. Built to FIA 8855-1999 standards, the Pro Racer was developed for HANS driver safety systems and comes in four versions. This is the standard-sized Pro Racer SPA for more slightly-built drivers. The seat is available in various sizes, including an XL version for drivers of larger build. The Pro Racer fits the driver like a glove, and the FIA-homologated flexible side-mount accommodates any driver’s physique with ease. RECARO PRO RACER SPA FEATURES AND ATTRIBUTES Weight: ~15.4 lbs (~7.0 kg) FIA 8855-1999 certified and crash tested Certified for five year’s use in FIA-sanctioned races Side-impact neck protection developed and optimized to work with head and neck safety systems RECARO high-integrity, Carbon-Kevlar® comfort shell The standard size fits smaller drivers; the XL seat fits average-size North American drivers Aggressive thigh and torso bolstering High-quality, durable, shock-absorbing foam RECARO friction grip at shoulders Flame-retardant upholstery FMVSS 302 Suitable for 4, 5, or 6-point harnesses Available Flexible Side Mount (pictured) not included RECARO PRO RACER SPA DIMENSIONS

Recaro Podium Carbon Fiber Racing Seat The new RECARO Podium is much more than a thoroughbred CFRP shell seat. It’s a pioneering seat design for the contrasting demands of road and track. It’s not just its sleek outline, visible structures or motorsport-inspired pads in varying thicknesses that make heads turn. The Podium stands out because of its superior quality and exceptional performance on all road types – for driving day-to-day and at the limit. The RECARO Podium is the only retrofit shell seat on the market that is approved for use on public roads and has FIA homologation. Racing technology doesn’t get better than this!  Be sure you also add the specific Recaro Podium seat slider and side mount to your order to complete your new Recaro seat setup. RECARO PODIUM CARBON FIBER RACING SEAT DETAILS Suitable for racetracks and roads (ABE and FIA homologation) Carbon fiber reinforced plastic (CFRP) seat shell Sporty seat performance AGR certified (German Healthier Backs Campaign) RECARO PODIUM CARBON FIBER RACING SEAT DIMENSIONS

Sparco SPX Reclining Seat (non-FIA)  The SPX is handcrafted in Italy using the same technology and materials used for OEM super cars.  In fact, the SPX is the first carbon fiber reclining seat available to the public that meets the same specifications required by the OEM manufacturers and weighs only 28 pounds. What this means is that the attention to detail and quality put into the SPX cannot be matched by any other seat manufacturer on the market today.  The Sparco SPX seat represents the ultimate evolution of the sport seat. The SPX uses a combination of carbon fiber and advanced composites that give the driver both comfort and performance in a lightweight package. With the ergonomic shape of the carbon fiber backrest and the seating position of the RTM composite lower, the SPX holds the driver during extreme lateral forces and is comfortable for long road trips.  The SPX is covered in a combination of beautiful perforated and smooth Italian leather. The center of the SPX is covered in Alcantara suede to allow you to gain absolute control of your vehicle and enhance your driving experience. To finish off the performance look, all hand stitching is done in tone-on-tone black with the Sparco logo embroidered in matching black. The gloss finished carbon fiber backrest features a leather pull strap which releases the backrest to fold forward to allow access to a backseat or storage area. The backrest also features a micro adjustment knob that allows you to dial in the perfect driving position.  The SPX is sold in driver and passenger versions (left and right). TECHNOLOGY Lightest carbon fiber reclining seat on the market Gloss carbon fiber back rest RTM composite lower (an advanced composite with strength and weight similar to carbon fiber) Covered in hand-stitched Italian leather and Alcantara suede Leather pull for seat back release Sold in driver (left) and passenger (right) versions SPX DIMENSIONS A LITTLE HISTORY Sparco has designed and engineered some of the most advanced sport seats in the world, including the first-ever adjustable carbon fiber seat in 1998 for the Lamborghini Diablo. Since then, countless super cars such as the Bugatti Veyron and Lamborghini Aventador have used Sparco design and technology in their vehicles. In addition to seats, Sparco also produces carbon fiber body panels, bumpers, roofs and aerodynamic pieces, in addition to structural carbon fiber parts like stressed-member engine cradles and other chassis parts.  Supplying OEM manufacturers requires every part to pass demanding safety and durability tests. Sparco’s extensive expertise in carbon fiber technology is why they're a Tier One supplier for Alfa Romeo, AMG, Aston Martin, Audi, Bentley, Bugatti, Ferrari, Koenigsegg, Lamborghini and Lotus to name a few. 

Sabelt X-Pad Carbon Racing Seat The Sabelt X-Pad Carbon is exceptionally light weight, the perfect seat for those racing smaller cars with limited interior space who still demand the safety of a full-containment seat. Sabelt has managed to by making the shell smaller and lighter while maintaining interior seat dimensions that fit most average racing drivers. The Sabelt X-Pad Carbon Racing Seat is Sabelt’s most compact seat yet, specifically designed to fit in smaller cockpits and offering the safety and weight savings of a high-strength carbon fiber shell. They achieved this by replacing bulky racing seat padding with significantly thinner, but still very comfortable foam padding. You'll never miss the added bulk! The exterior dimensions of the seat were reduced by changing key elements -- like eliminating the "rolled" upper edges of the seat -- which combine to reduce the width significantly without narrowing the seat to the point where it would only fit small drivers. The Sabelt X-Pad Carbon racing seat is a premium example of how game-changing innovation can be discovered in plain-sight; it doesn't always require a shake-up to standard conventions. Sabelt X-Pad Carbon Racing Seat FEATURES: FIA 8855-1999 homologation. Weight: 13.7 lbs (6.2 kg). Super-light carbon fiber shell construction. Standard side mounting. Perfect full-containment seat for small cockpit cars. Shoulders and hips designed for Regulation 8862 to improve driver safety.

  Racetech RT4119HRW Racing Seat   Building upon the successful 129-Series, the Racetech RT4119 racing seat offers the same ergonomic form and incredible features in a lighter and more affordable package. The RT4119 race seat is used by many professional teams at both the national and international levels. There are four sizes available for teh Racetech RT4119 race seat: Standard, Wide, Tall, and Wide & Tall. Customize your seat further by adding low-profile base cushions, or you can add side cushions for support in the thigh area. The 119-Series seats are compliant with FIA 8855-1999 standards1.   Racetech RT4119HRW Racing Seat BRACKET AND MOUNTING OPTIONS:   Side mount to the floor using Racetech RTB1009M 5mm aluminium brackets. Back mount using the RTB2115B bracket in conjunction with RTB2005C clamps. The RTB2115B is a 5mm aluminium bracket that bolts directly to the shoulder beam of the seat. The RTB2005C clamps bolt to the RTB2115B and come in three variants: 11/2 inch (38mm), 15/8 inch (41mm), or 13/4 inch (45mm) ID to suit the roll cage tubing diameter in your vehicle.   Note 1: In order to comply with FIA 8855-1999, Racetech 119-Series seats (except the RT4119HRW) must be back-mounted to the roll cage at shoulder level. Back-mounting improves seat strength and stability during an impact, increases driver feel, and reduces driver fatigue.   Racetech RT4119HRW Racing Seat FEATURES:   FIA homologation complies with FIA 8855-1999 regulations. Shell construction of composite (GRP) Shell weight from 16.8 lbs. (7.6 kg). Large harness guides. Air ducting vented to the driver's lower back. Back-mount compatible. Racetech RT4119HRW Racing Seat SIZING: Standard (HRW) Wide (WHR) Tall (THR) Wide & Tall (WTHR)

Sparco SPR Reclining Seat (non-FIA)    Drawing on our decades of racing history, Sparco has created an extensive line of street car seats that offer the ultimate in comfort and performance. Our ergonomic designs help cradle and protect the driver against even the most demanding lateral forces.The Sparco SPR is a top-level sport seat that holds the driver during spirited driving and is also comfortable for long road trips. It features the ergonomics as the Sparco SPX but at a more economical price. The SPR has a lightweight RTM composite shell along with an OEM derived recliner system with dual handles for multiple adjustment. The SPR is covered in synthetic leather with soft-touch micro-suede center. To finish off the performance look, the SPR is hand stitched in tone on tone black with the Sparco logo embroidered in matching black. The Sparco SPR seat represents the ultimate evolution of the sport seat. The Sparco SPX uses a combination of carbon fiber and advanced composites that give the driver both comfort and performance in a lightweight package. With the ergonomic shape of the backrest and the seating position of the RTM composite lower, the Sparco SPR holds the driver during extreme lateral forces and is comfortable for long road trips. Sparco SPR Reclining Seat TECHNOLOGY Lightweight RTM Composite shell Durable synthetic leather OEM Derived Recliner Accepts 4-point harness Ergonomic bolsters and padding provide support and comfort Soft touch Micro-suede and Synthetic Leather   Sparco SPR Reclining Seat DIMENSIONS A LITTLE HISTORY Sparco has designed and engineered some of the most advanced sport seats in the world, including the first-ever adjustable carbon fiber seat in 1998 for the Lamborghini Diablo. Since then, countless super cars such as the Bugatti Veyron and Lamborghini Aventador have used Sparco design and technology in their vehicles. In addition to seats, Sparco also produces carbon fiber body panels, bumpers, roofs and aerodynamic pieces, in addition to structural carbon fiber parts like stressed-member engine cradles and other chassis parts. Supplying OEM manufacturers requires every part to pass demanding safety and durability tests. Sparco’s extensive expertise in carbon fiber technology is why they're a Tier One supplier for Alfa Romeo, AMG, Aston Martin, Audi, Bentley, Bugatti, Ferrari, Koenigsegg, Lamborghini and Lotus to name a few.

Sparco QRT-C Performance Carbon Racing Seat The Sparco QRT-C Performance Carbon seat represents the luxury evolution of the Sparco QRT-C race seat. The Sparco QRT-C Performance Carbon uses the same FIA approved light-weight all-carbon fiber race shell as the Sparco QRT-C race seat but is covered in Italian Leather and Alcantara. The Sparco QRT-C Performance Carbon is constructed from “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The seats are handstitched in the Sparco OEM factory in Torino Italy. The Sparco QRT-C Performance Carbon has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller cockpits. The Sparco QRT-C Performance can hold the driver during extreme lateral forces, but is also comfortable for long road trips. The Sparco QRT-C Performance Carbon seat is FIA Approved. Sparco QRT-C Performance Carbon Racing Seat SIZING Large – up to a 36” waist (pants size) WHAT IS Sparco QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies.     QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco QRT-C Performance Carbon Racing Seat TECHNOLOGY Ultralight Carbon Fober Shell Excellent fitment into small cockpits Medium/Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved SPARCO QRT-C PERFORMANCE CARBON DIMENSIONS

Recaro Pro Racer SPG Ultra ORV Racing Seat In motorsport, your faith in the quality and reliability of your equipment must be absolute if you’re going to win. The Pro Racer SPG Ultra ORV is specially designed to address off-road race cars requirements and certified to FIA standard 8855-1999. It is ergonomically designed to provide outstanding support, while offering protection for the back and neck against all the forces of an off-road race course. A Safe Seat Makes for a Sure Win The specially designed head surround (for better visibility), the friction grip surface around the shoulders, and the highly-effective energy-absorbing ENRg+™ Performance cushion foam are all essential when pushing off-road race vehicles to the limit. The seat is suitable for 4-, 5- or 6-point belts as well as HANS/FHR systems. Its particularly robust cover materials are both weather and abrasion resistant. This is the Ultra version to accommodate larger drivers. Check out the XL version here if you need slightly smaller seat dimensions.  Recaro Pro Racer SPG Ultra ORV Racing Seat Details Seat in Ultra-sized version to fit larger drivers Weight: ~20.6 lbs (9.4 kg) FIA 8855-1999 certified and crash tested, good for five years Suitable to work with head and neck safety systems Shock-absorbent ENRg+™ Performance* cushion foam Highly flame-retardant upholstery (FMVSS 302) Suitable for 4-, 5-, 6-point belt (racing use) Seat shell glass fiber reinforced polymer (GFRP) Designed for use in off-road vehicles Robust cover materials are both weather and abrasion resistant

Sabelt GT-Spine Racing Seat The industry's very first racing seat to earn the coveted FIA 8855-2021 homologation, the GT-Spine is good for 10 years from the date of manufacture! This innovative gel-coated fiberglass competition racing seat by Sabelt boasts an aggressive design, DCT head protection, fireproof fabric, and high density foam. The GT-Spine seat also provides excellent lateral support and is more than a worthy choice for safety and comfort where it matters most. Sabelt GT-Spine Racing Seat FEATURES: FIA 8855-2021: Must use F12 Brackets (see pulldown menu) Large weighs 35.5 lbs High side bolstering prevents lateral movement and keeps the driver positioned like never before Six-point harness ready with sub-belt hole in the bottom of the shell High wear resistance velour fabric Heavy-duty M12 mounting bolts (included) This item must be shipped freight Sabelt GT-Spine Racing Seat Dimensions:

Recaro Pro Racer SPG XL ORV Racing Seat In motorsport, your faith in the quality and reliability of your equipment must be absolute if you’re going to win. The Pro Racer SPG XL ORV is specially designed to address off-road race vehicle requirements and is certified to FIA standard 8855-1999. The Pro Racer SPG XL ORV is ergonomically designed to provide outstanding support while offering protection for the back and neck against all the forces of an off-road race course. Specially Designed To Be A Game Changer Off-Road The specially-designed head surround (for better visibility), the friction grip surface around the shoulders, and the highly-effective energy-absorbing ENRg+™ Performance cushion foam are all essential when pushing off-road race vehicles to the very limit. The Recaro Pro Racer SPG XL ORV racing seat is suitable for 4-, 5- or 6-point belts as well as HANS/FHR systems. Its particularly robust cover materials are both weather- and abrasion-resistant. Also available in an Ultra version for larger drivers. Recaro Pro Racer SPG XL ORV Racing Seat Details Seat in XL version Suitable to work with head and neck safety systems Shock-absorbent ENRg+™ Performance* cushion foam Highly flame-retardant upholstery (FMVSS 302) Suitable for 4-, 5-, 6-point belt (racing use) Seat shell glass fiber reinforced polymer (GFRP) Designed for use in off-road vehicles Robust cover materials are both weather and abrasion resistant FIA certified and crash tested Recaro Pro Racer SPG XL ORV Racing Seat Dimensions (in inches)

Sparco ADV XT 8855-2021 Racing Seat SPECIAL ORDER (8-10 WEEKS) - NonRefundable Elevate Your Racing Performance with the Sparco ADV XT 8855-2021 Racing Seat Now you can enjoy your new race seat for up to 10 years*   *Requires Sparco Side Mount 004932 in order to qualify for the 10 year FIA certification.  You may select the side mount when ordering your new Sparco Master 8855-2021 racing seat. Elevate Your Racing Performance with the Sparco ADV XT 8855-2021 Racing SeatIntroducing the Sparco ADV XT 8855-2021 Racing Seat, the pinnacle of racing comfort and safety. Designed to meet the rigorous standards of the FIA 8855-2021 certification, this seat combines cutting-edge technology with exceptional craftsmanship to deliver an unparalleled racing experience.Safety is paramount in motorsport, and the Sparco ADV XT Racing Seat is engineered to provide uncompromising protection. Constructed with a sturdy tubular frame and utilizing high-quality materials, this seat ensures exceptional durability and resilience. It has been rigorously tested to meet the stringent FIA 8855-2021 safety standards, providing you with the confidence to push your limits on the track.But the Sparco ADV XT Racing Seat doesn't stop at safety. It also delivers exceptional comfort, keeping you focused and comfortable during those intense racing sessions. The ergonomic design conforms to your body, providing optimal support and reducing driver fatigue. With its plush padding and premium upholstery, this seat enhances your overall comfort, enabling you to maintain peak performance throughout every race.Experience precision control like never before with the Sparco ADV XT Racing Seat. Its advanced design features integrated side and backrest bolsters that can be easily adjusted to your preferences. This customizable fit ensures optimal stability, allowing you to make precise maneuvers with ease, giving you the competitive edge you need to outperform your rivals.Visually striking and flawlessly crafted, the Sparco ADV XT 8855-2021 Racing Seat is a true embodiment of style and functionality. Its sleek and aerodynamic design, complemented by intricate stitching and attention to detail, will make a statement in any race car interior.When it comes to performance, safety, and comfort, the Sparco ADV XT 8855-2021 Racing Seat exceeds expectations. Its 10-year 8855-2021 certification highlights its exceptional quality and long-lasting durability, ensuring it will be your trusted companion for countless racing adventures.Take your racing experience to the next level with the Sparco ADV XT 8855-2021 Racing Seat. Unlock unparalleled safety, comfort, and performance on the track. Don't settle for anything less than the best—choose Sparco and dominate the competition. WHAT IS 8855-2021 CERTIFICATION? The FIA 8855-2021 certification is a safety standard established by the Fédération Internationale de l'Automobile (FIA), the governing body for motorsport. It specifically pertains to racing seats and sets forth a set of stringent criteria that must be met to ensure the highest level of safety for drivers.The certification encompasses a range of requirements related to the design, construction, and performance of racing seats. These requirements include: Impact Resistance: Racing seats must be able to withstand high-impact forces and provide effective protection to the driver in the event of a crash. They undergo rigorous testing to ensure they can withstand these forces without compromising driver safety. Load-Bearing Capacity: Racing seats are subjected to tests to determine their load-bearing capacity. This ensures that they can support the weight of the driver and maintain their structural integrity under intense racing conditions.Flame Resistance: Racing seats must be constructed from materials that are resistant to fire. This is crucial in motorsport, as a fire incident can occur in the event of a crash. The FIA 8855-2021 certification requires seats to meet specific flame resistance standards to enhance driver safety. Durability: Racing seats undergo tests to evaluate their durability over an extended period of time. This ensures that they can withstand the demands of racing, including vibrations, impacts, and repeated use, without compromising their structural integrity.It is important for racers to choose seats that are certified under the FIA 8855-2021 standard, as it ensures they are investing in a product that meets the highest safety standards set by the governing body of motorsport. By selecting FIA-certified seats, drivers can have confidence in the safety and performance of their racing equipment, allowing them to focus on pushing their limits on the track.  The 10-year 8855-2021 certification is a remarkable achievement that sets the Sparco Master Racing Seat apart from its competitors. This certification signifies that the seat meets the rigorous safety standards established by the Fédération Internationale de l'Automobile (FIA), the governing body for motorsport safety.The FIA 8855-2021 standard is specifically designed to ensure the highest level of safety for racing seats. It encompasses a comprehensive set of criteria that must be met, including impact resistance, load-bearing capacity, flame resistance, and durability. Undergoing rigorous testing and evaluation, the Sparco Master Racing Seat has proven its ability to withstand extreme conditions and provide optimal protection to the driver.The 10-year certification is a testament to the seat's exceptional build quality and longevity. It means that the Sparco ADV XT Racing Seat is built to last, with materials and construction techniques that are designed to withstand the demands of competitive racing over an extended period of time. This certification provides peace of mind to racers, knowing that their investment in the Sparco ADV XT Racing Seat will serve them well for many years to come.Moreover, the 10-year certification demonstrates Sparco's commitment to excellence and their dedication to ensuring the highest level of safety in motorsports. Sparco, renowned for their expertise in producing high-performance racing equipment, has consistently pushed the boundaries of innovation to deliver products that meet and exceed industry standards.Choosing a racing seat with a 10-year 8855-2021 certification means you're making a wise investment in your safety and long-term racing endeavors. It's a clear indication that the Sparco ADV XT Racing Seat has undergone rigorous testing, proven its exceptional quality, and is recognized by the FIA as a product that meets the highest safety standards. DIMENSIONS