AMT Motorsport AMT Motorsport Corvette C5 To C8 Ultra-Low Seat Mount from $470.00
AMT Corvette C5 to C8 Ultra-Low Seat Mount SUB STRAP MOUNT INCLUDED WITH EACH BASE The Corvette was equipped from the factory with many great things. Seats are not one of those things. Those who have added a proper racing seat to their Corvette often say it's the most important mod they've made to increase their track-day enjoyment and safety. However, a proper racing seat should be mounted from the side on fixed mounts, not using the OEM seat hardware. As a result, headroom becomes a concern with any racing seat in a Corvette, but AMT Motorsports has effectively eliminated that concern with the Ultra-Low Seat Mount. INNOVATIVE DESIGN Countless development hours were spent making the Ultra-Low Seat Mount the best available for the Corvette. (The only way to get your seat lower in your car is to cut a hole in it!) The bottom of the seat can literally touch the floor in your Corvette. By machining a perfect hex in the mounts to accept the mounting bolts for the side brackets, AMT maximizes seat clearance. This machined hex also removes an extra wrench (and a whole lot of headache) from the install process. These seat mounts are machined from 6061-T6 extruded aluminum. Rather than allow the side brackets to only sit on bolts, AMT machines the brackets so there's a perfect mechanical interface with the bottom and side of each floor mount, increasing stiffness and strength. Included with every mount are studs and hardware to allow the mount to be bolted using the factory Corvette seat studs. OPTIONAL SUB-STRAP BAR Finally there is an optional integral, movable cross bar to accept five- and six-point sub straps. This sub-strap bar is bolted to the floor mounts with flat head screws, and there are two more holes in the cross bar in case your sanctioning body requires you to bolt the bar through the floor. Two eye-bolts are included with the cross bar. We don't recommend using a different sub-strap bar with the AMT mount since you'll need to modify either the mount or the sub-strap bar to get it to fit. If you're ordering this mount without a sub-strap bar, you should mount your eyebolts directly through the floor. LIFETIME GUARANTEE As with everything AMT makes make, these mounts and sub-strap bars are proudly 100% made in the USA. If any part of the mount fails for any reason, AMT Motorsport will replace the offending part free of charge.
Brey Krause Brey Krause C6-C7 Corvette Extra Low Seat Mount w- Sub-Bar $262.48
Brey Krause C6/C7 Corvette Extra Low Seat Mount w/ Sub-Bar The Brey Krause R-9153 Driver-side seat mount offers a solution to the low roof-line of the C7 Chevrolet Corvette. The racing seat adapter places the seat rails at a slant, allowing the seat to be lower in a rearward position when combined with a Recaro Slider (sold separately). This slant allows the seat to sit higher when in a forward position (perfect for shorter drivers), while offering increased head clearance when adjusted rearward for taller drivers. The R-9153 bolts directly to the floor of the C7 Corvette, and combines with a Recaro slider to allow the installation of many seat options when used with Brey Krause side-mounts. Also compatible with the C6 Corvette if you are searching for additional head-room.The mounting kit comes complete with an adjustable integrated Sub-Bar for correct mounting of your 5 or 6 point harness system. The design also allows for the reuse of stock 3-point belts, with inboard/outboard lap belt mounting locations built in. Note: Brey Krause Seat brackets must be purchased separately - see Brey Krause R-906X series side mount brackets.PLEASE NOTE: Although this kit allows for the installation of many brands and models of seats, due to the extremely low roof-line and the tight confines of the C7 Corvette, many larger seats will not fit. Please contact one of our racing seat experts 888-748-7223 with questions relating to your particular installation needs. FEATURES: Materials: Aircraft-grade aluminum and Type 304 stainless steel (sub-bar) Finish: Black gloss powder coat Weight: 7.8 lbs. Models: Fits C6 and C7 coupes (2005 - 2019), including Z06 All necessary hardware included
Brey Krause Brey Krause Gen5 Camaro Seat Mount w- Sub-Bar $328.19
Brey Krause Gen5 Camaro Seat Mount w/ Sub-Bar Everything you need in one place! Select driver or passenger side and add a sub-mount bar for each side! Brey-Krause manufactures high quality, performance driving accessories for a variety of automobiles. Innovative engineering and superior workmanship are hallmarks of the Brey-Krause automotive products. All Brey-Krause parts can be installed easily, without any modifications, using existing holes and factory mounting points to ensure that the value of the vehicle is never compromised. Whether the car is used on the road or the track, the Brey-Krause performance driving accessories set the standard in both engineering function and aesthetic design. Features: Material - Type 304 Stainless Steel Finish - Black gloss powder-coat; Satin finish Installation - Attaches to driver side factory seat mounting points R-9172 sub strap mount sold separately (see pull-down) Miscellaneous - Seat brackets must be purchased separately (see pull-down) Compatible side mounts when using Recaro sliders - For Sparco Seats to Recaro Sliders (These parts are made for but not limited to the mentioned seats.): R-9060 - Sparco Evo, Momo Super Cup, R-9061 - Sparco Evo 2, Evo 2+, Corsa, OMP HTE-XL Compatible side mounts when mounting direct to R-9170 - Side Mount Brackets for Sparco Seats (These parts are made for but not limited to the mentioned seats.):R-9071 - Sparco Evo, Pro 2000, R-9072 - Sparco Evo, Pro 2000, R-9073 - Sparco Evo 2, R-9074 - Sparco Evo 2, R-9761 - Sparco Evo 2 Plus, R-9762 - Sparco Evo 2 Plus, R-9075 - Sparco Evo 2 US, R-9076 - Sparco Evo 2 US Fitment: Chevrolet Camaro 5th Gen RACE SEATS ONLY! Does not work with OEM Recaro seats.
Brey Krause Brey Krause Gen6 Camaro Seat Mount w- Sub-Bar $328.19
Brey Krause Gen6 Camaro Seat Mount w/ Sub-Bar Everything you need in one place! Select driver or passenger side and add a sub-mount bar for each side! Brey-Krause manufactures high quality, performance driving accessories for a variety of automobiles. Innovative engineering and superior workmanship are hallmarks of the Brey-Krause automotive products. All Brey-Krause parts can be installed easily, without any modifications, using existing holes and factory mounting points to ensure that the value of the vehicle is never compromised. Whether the car is used on the road or the track, the Brey-Krause performance driving accessories set the standard in both engineering function and aesthetic design. Features: Material - Type 304 Stainless Steel Finish - Black gloss powder-coat; Satin finish Installation - Attaches to driver side factory seat mounting points R-9172 sub strap mount sold separately (see pull-down) Miscellaneous - Seat brackets must be purchased separately (see pull-down) Compatible side mounts when using Recaro sliders - For Sparco Seats to Recaro Sliders (These parts are made for but not limited to the mentioned seats.): R-9060 - Sparco Evo, Momo Super Cup, R-9061 - Sparco Evo 2, Evo 2+, Corsa, OMP HTE-XL Compatible side mounts when mounting direct to R-9170 Driver- Side Mount Brackets for Sparco Seats (These parts are made for but not limited to the mentioned seats.):R-9071 Passenger - Sparco Evo, Pro 2000, R-9072 - Sparco Evo, Pro 2000, R-9073 - Sparco Evo 2, R-9074 - Sparco Evo 2, R-9761 - Sparco Evo 2 Plus, R-9762 - Sparco Evo 2 Plus, R-9075 - Sparco Evo 2 US, R-9076 - Sparco Evo 2 US Fitment: Chevrolet Camaro 6th Gen 2016+ RACE SEATS ONLY! Does not work with OEM Recaro seats.
Brey Krause Brey Krause R-9030 Sub Strap Mount $158.51
Brey Krause Sub Strap Mount The Brey Krause R-9030 works with BK's R-907x side mount brackets in conjunction with factory non-power 996/997/986/987* sliders to give you a straightforward solution to mounting your harness sub straps. A one-piece seat with anti-sub strap pass-through is required. Expertly crafted from 1.5" x 1" x 0.125" wall carbon steel tubing and powder coated in a black wrinkle-finish, the R-9030 is strong and durable. FEATURES: Fits all Porsche 996, 986 , most 997.1 and 987.1 with manual seat sliders* Material: 1.5" x 1" x 0.125" wall carbon steel Finish: Powder coated black wrinkle-finish Weight: 3 lbs. * Note: Factory non-power slider assembly from the 996/986 (and most 997/987s) required for installation. Will not fit 997.2 or 987.2 with tabbed sliders. Will not fit power-operated sliders.
Brey Krause Brey Krause R-9041 Sparco Slider Adapter Porsche 997-987-991-981 $165.41
Easily Install Sparco Racing Sliders In Your Porsche The Brey Krause R-9041 Seat Track Adapter Kit allows the installation of Sparco Seat Sliders to the floor of Porsche 911, Boxster, and Cayman models. This in turn allows the ability to adapt various Brey Krause R-906x Seat Side-Mount Brackets (sold separately) to the floor of your compatible Porsche. FEATURES TIG welded from 7-Ga. T304 stainless steel Adapts Sparco 00493 or Cobra sliders to Porsche 991/981/997/996/987/986 Satin-finish stainless steel Weight: 2 lbs. 6 oz.
Brey Krause Brey Krause R-9044 Seat Adapter w Sub Mount Porsche 996-997-986-987 $282.57
Brey Krause Side-Mount Adapter & Sub Strap Bar The Brey Krause R-9044 Side-Mount Adapter with Integrated Sub-Strap Bar makes installing racing seats in your Porsche straightforward and painless. Designed for the Porsche 996, 997, Boxster or Cayman, the R-9044 does away with your OEM seat sliders, mounting the seat as low as possible in the car and removing excess weight. An integrated sub-strap bar is adjustable for proper 5 or 6-point sub-strap routings. Three front-to-rear fixed mounting points allow your Brey-Krause Side-Mount Adapters (not included) to be installed in several fore-aft positions. Best of all, the entire assembly can be quickly installed before a track event and just as easily removed when you're back home. Voila! The daily driving comfort of your stock seats plus the bolstering and safety of a racing seat when you're at the track.Brey Krause side-mount brackets can be added separately in the dropdown above, creating a ready-to-bolt-in racing seat system! FEATURES: Fits Porsche 911 Carrera (996/997), Boxster & Cayman (986/987) Material: Type 304 Stainless Steel Weight: 4 lbs. Finish: Satin Side mounts not included
Brey Krause Brey Krause R-9172 Sub Strap Mount For 6th Gen Camaro $64.32
64.32 The Brey Krause R-9172 Sub Strap Mount is designed to mount directly to Brey Krause seat track adapters R-9170, and R-9171. This sub strap mount can be used with either driver- or passenger-side mounts. FEATURES: T304 Stainless Steel Brushed Stainless Finish Weight 2 lbs. Side Mounts, Sliders, and Harness not included
Brey Krause Brey Krause R-925X Sub Strap Mount For BK Side Mount Systems $112.46
Adjustable Sub Strap Mounting Bar R-925X The Brey Krause R-9259 Sub Strap Mount is designed to mount directly to any Brey Krause variable-width side mounts and mounting adapters, including those designed to be used with seat sliders. The stainless steel bar is threaded on both ends to allow for length adjustment for seat widths up to 426mm while keeping the sub-strap guide centered. (For seats over 426mm, use the BK-R-9258). This sub strap mount can be used with either driver- or passenger-side mounts. FEATURES: T304 Stainless Steel Brushed Stainless Finish Weight 2 lbs. Side Mounts, Sliders, and Harness not included
Brey Krause Brey Krause R-9775 Cobra Nogaro Mount Porsche 996-997-986-987 Sliders from $249.36
Easily Install Cobra Nogaro Sport Seats In Your Porsche The Brey Krause R-9775 makes adapting the phenomenal Cobra Nogaro seats to your Porsche's OEM manual sliders (not included). It can also be used with the Brey Krause R-9044 Seat Adapter for a lower mounting height and even lighter weight. The Cobra Nogaro is the perfect balance between a full-fledged racing seat (with pass-throughs for harness shoulder and anti-sub belts) and a seat comfortable enough for daily driving or weekend touring. With threaded lap belt bosses on both sides, the R-9775 works on both the driver- and passenger-side. It makes adapting the Nogaro to your OEM Porsche non-powered sliders a breeze. The Schroth Profi II GT3 six-point harness bolts right up, as well as your OEM inboard seat belt receptacle. Add the BK-9030 sub-belt adapter (available in the dropdown above) and you really have the best of both worlds! FEATURES: Fits all Porsche 996, 997, Boxster/Cayman models with manual seat sliders. Designed to fit Cobra Nogaro Sport Seats. Material: 11 gauge, type 304, stainless steel. Finish: Powder coated in durable black wrinkle-finish. Weight: 4 lbs. Seat slider not included Note: Factory non-power slider assembly from the 996/986 (and most 997/987s) required for installation. Will not fit sliders with power option.
Competition Motorsport CMS Performance Harness Install Kit For C8 Corvette from $125.00 $250.00
CMS Performance Harness Install Kit For C8 Corvette This Product Fits The Following Cars: Chevrolet Corvette Stingray, C8 (2020+) Chevrolet Corvette Z06, C8 (2023+) The CMS Performance Harness Install Kit for the C8 Corvette allows you to install the lap belts for a four-point harness in your C8 Corvette. This kit is typically used in conjunction with the CMS Performance C8 Harness Bar or CMS Performance Deluxe C8 Harness Bar to locate the shoulder straps of your harness. Each Harness Install Kit is for one seat (driver or passenger side, they're interchangeable). If you intend to install harnesses for both seats (many HPDE organizers require equal restraints for instructors), order two and save! Quality and Precision Designed and Built in the USA Designed and built in the USA, the CMS Performance Harness Install Kit for the C8 Corvette is CNC cut and fully TIG-welded from high-strength stainless steel and powder-coated satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete, detailed instructions make installation pretty simple (figure about an hour if you're reasonably handy). We recommend the Schroth Profi II ASM Harnesses as a perfect complement to this kit. This Schroth four-point harness features proprietary Anti-Submarine (ASM) technology developed specifically for use in street cars with no sub strap pass-through in the seats. CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance Manufacturer Part Number: HarnInstall-C8 Material: Stainless steel Construction: Full 360o TIG welded Finish: Powder coated satin black Installation: Approx. one hour This product is intended for off-road use only.
Competition Motorsport CMS Performance Sub Strap Mount for Porsche 992-991-981-718 from $195.00
Sub Strap Mount for Porsche LWB For cars with Porsche OEM CFRP Full Bucket ("Lightweight Bucket" or "LWB") Seats Only. FITMENT: 992 GT3/GT3RS 991.1 & .2 GT3/GT3RS 992 GT3/GT3RS 991.2 GT2RS 981 Cayman GT4 718 Cayman GT4 The Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five-, six-, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Lighweight Bucket Seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base. The Performance Sub Strap Mount fits either driver- or passenger-side seats. Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA. Made of solid steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. The Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety. FEATURES: Solid steel construction for maximum safety Allows full fore/aft and up/down seat adjustment Powder-coated to match OEM seat base Fits driver or passenger seat (Porsche LWB only) Simple to install Compatible with OEM seat belt and airbag hardware
Competition Motorsport CMS Performance Ultimate Race Seat Mounting Kit (Porsche) from $410.00
CMS Performance Ultimate Race Seat Mounting Kit For Porsche This Kit Fits the Following Vehicles: Porsche 911 Carrera, 2001-2023 (All) Porsche Boxster, 2001-2023 (All) Porsche Cayman, 2006-2023 (All) Introducing Our Complete Race Seat Mounting Kit: The Ultimate Upgrade for Porsche Motorsports Enthusiasts! Are you a Porsche racing or track-day aficionado looking to upgrade your on-track safety and performance? Look no further than the CMS Performance Ultimate Racing Seat Mounting Kit. One of the very best upgrades you can make for driving your Porsche on the race track is adding a dedicated racing seat. CMS Performance designed this kit to give you a complete solution to installing your choice of seat in your Porsche. No mixing-and-matching, hunting for parts and wondering whether it'll all work together. The CMS Performance Ultimate Race Seat Mounting Kit has everything you need! Precision Engineering for Porsche Excellence The CMS Performance Ultimate Race Seat Mounting Kit is precision- engineered, tailor-made to fit a variety of race seats safely and securely in your Porsche. Crafted with meticulous attention to detail from 3/16" carbon steel, this kit draws on our many years of experience with track-prepped Porsches. Let CMS Performance help you unlock the full potential of your high-performance Porsche on the race track. Custom Powder Coat to Match Your Porsche The CMS Performance Ultimate Race Seat Mounting Kit comes standard in a durable black wrinkle-finish powder coat. CMS Performance can also custom powder-coat your kit in just about any Porsche OEM paint color you like. Simply choose "Custom Color" in the dropdown above and specify the Porsche color you want in your Order Notes at check-out. CMS Performance Ultimate Race Seat Mounting Kit Includes: Mounting base w/ integrated sub strap bar (bolts securely to factory Porsche seat mounting holes) Two steel side-mount race seat brackets All necessary hardware (Grade 8) Detailed installation instructions Optional: high-performance race seat slider Key Features of This Kit: Race-Ready Compatibility: Designed to seamlessly integrate with a wide range of racing seats from Sparco, OMP, Racetech and Sabelt. Our mounting kit ensures a perfect fit on the driver and/or passenger side of your Porsche. Whether you drive a 911, Cayman, or Boxster, CMS Performance has you covered. Fully Integrated: The CMS Performance kit includes everything you need to install a racing seat in your Porsche. No mixing-and-matching, so you can spend less time installing and more time racing. Lightweight Durability: Constructed from premium materials, our kit prioritizes strength without compromising on weight. The integrated design puts a premium on maintaining structural integrity. Customization Options: Tailor your installation to perfection with multiple options, including racing sliders and custom powder-coat colors. Enhanced Safety: Safety is paramount in motorsports, and our kit doesn't cut corners. It's designed to meet or exceed industry safety standards, keeping you protected during the most demanding races. Quick and Easy Installation: The CMS Performance Racing Seat Mounting Kit is engineered for straightforward installation and precise fitment. Seat mounting kit is shown with optional race seat slider.
Discovery Parts Discovery Parts Billet Universal Seat Back Brace $169.95
Discovery Parts Billet Universal Seat Back Brace The Discovery Parts Universal Seat Back Brace is approved by SCCA, IMSA, NASA, BMW CCA and other sanctioning bodies. Our aluminum units are designed to bolt to the back of your racing seat and clamp to your roll bar or cage with no welding required Discovery Parts Billet Universal Seat Back Brace Details Manufacturer: Discovery Parts Manufacturer part number: 64080 Fits roll bars: 1-1/2", 1-5/8", and 1-3/4" in diameter Fore-Aft adjustment: 2" to 14" Seat plate dimensions: 3" x 9" (27 in2) Made in the U.S.A. Starting with a lightweight billet aluminum clamp, the Discovery Parts Universal Seat Back Brace features a specially-designed radius that fits roll bar tubing from 1-1/2" to 1-3/4" in diameter. This simple and rugged design allows a two-piece clamp design for easy installation in tight fitting areas. To save weight, two windows are machined with a convergent radius to allow maximum strength and the lightest weight possible. We specially designed the inside roll-bar radius for secure mounting. This Discovery Parts brace adjusts from 2" up to 14", making it ideal for multi-driver cars. The plate that bolts to the back of the seat is 3" x 9" for a total of 27 in2. This brace can be used with just about any aluminum or composite seat at any angle. For fore or aft adjustments, just loosen the upper main clamp housing and get a perfect adjustment for your seat in any position. For other adjustments the brace can be loosened so that the seat can be tilted or moved up or down, and the brace then re-tightened. SCCA, NASA, BMW CCA Club Racing, and IMSA require such braces on all non-FIA-rated seats. Please note: the design of this brace requires you to drill holes in the back of your racing seat and attach the bracket to the seat. Drilling holes and attaching a brace to a composite seat may void the seat warranty and/or the FIA-rating. Check with your seat manufacturer and sanctioning body to make sure you're in compliance. Installing this brace to an aluminum seat should not void any warranties and should comply with racing rules. Installation instructions and all mounting hardware are included.