Bell HP77 8860-2018 Carbon Fiber Helmet
Bell Bell HP77 8860-2018 Carbon Fiber Helmet $5,750.00
Bell HP77 8860-2018 Carbon Fiber Helmet The HP77, based on Bell’s highly successful F1 World Champion proven HP7 design, provides the latest impact protection by lowering the visor opening by 12 mm and reinforcing the front of the helmet with advanced ballistic protection. The HP77 is the most advanced FIA8860-2018 helmet in Bell’s product line and sets a new standard for a lightweight, aerodynamically superior carbon fiber helmet performance for the intense demands of open-wheel and open-cockpit forms of racing. The HP77 is homologated to the FIA8860-2018 ABP standard, the most rigorous sport helmet standard on the planet. The HP77 was designed for professional formula racers competing at the highest levels of the sport and for any other racing driver who treats safety as a paramount importance. FEATURES: Homologation: FIA8860-2018 ABP Visor opening lowered 12 mm for added ballistic protection from middle size debris High-strength and high modulus carbon fiber ultra-lightweight carbon shell Advanced multi-density, multi-piece liner for energy absorption and impact performance Optical grade injection molded Double Screen Anti-Fog (DSAF) visor Top and chin bar ventilation system with 12 air intake and extraction channels Air intake system includes two-part center and side air intakes Shell and shield design optimized to improve aerodynamic performance Integrated channels for drink tube and radio systems Top spoiler, top and chin bar gurneys available separately Factory installed HANS anchors Available front chinbar hole for drink tube HP helmet bag included Color: Carbon, Matte Finish Sizes: 54 to 59+ All sizes shown in centimeters Shield and pivot kit: SE77 shield , SV(SE07) pivot kit Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order - additional charges will apply). Grey is standard
Sparco Prime RF-10 8860 Supercarbon
sparco Sparco Prime RF-10 8860 Supercarbon $2,999.00
- New FIA 8860-2010 helmet compliant with Snell 2020 approval- Double-sized shell and polystyrene with vents- Hans clip- Removable and washable interior- Ready for drink system- FIA approved visor- Carbon fibre shell
-11% sale
Stilo ST5.1 GT Carbon Fiber Helmet SA2020
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo ST5.1 GT Carbon Fiber Helmet SA2020 $2,038.95 $2,266.00
Stilo ST5.1 GT Carbon SA2020 Helmet The ST5.1 GT Carbon is Stilo's Snell SA2020-compliant version of their best-selling carbon helmet. With an autoclave molded carbon fiber shell, the ST5.1 GT Carbon offers strength superior to fiberglass and composites while minimizing weight. With its large eyeport, the Stilo ST5.1 GT Carbon offers unsurpassed peripheral vision and all of the available tinted, mirrored, and iridium-colored visors (sold separately) have a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. Although updated to meet the newest Snell SA2020 certification, the Stilo ST5.1 GT Carbon retains its FIA 8858-2015 homologation as well. This makes the helmet legal for nearly all road race usage (except for those sanctioning bodies requiring FIA 8860 homologation). INTEGRATED FLEXIBILITY The Stilo ST5.1 GT Composite is unsurpased in built-in flexibility. Its two side ports can be fitted with three different types of integrated communication electronics, forced air, helmet eject system, or a hydration system. Thanks to its innovative shell design, mounting and routing these options to the ST5.1 GT is sleek and seamless. When not in use, you don't even know the features are there. Whether you're using side-mounted communications, side air, or a built-in hydration kit for staying hydrated during long enduro stints, everything is neat, tidy and completely out of the way when not needed. Stilo offers simply the best modular racing helmet on the market. Industry-standard M6 threaded receivers are molded into the helmet shell to accommodate anchors for whichever head-and-neck restraint you use. Size Note: We have found that customers who typically wear a size 59 helmet are most comfortable in size 60, which uses the large shell. Please order accordingly. FEATURES: Noise attenuating earmuffs to reduce exterior noise Ports for integrated communications, forced air, or hydration SA2020 Snell certification offers increased protection All existing Stilo ST5 shields and other Stilo accessories work on new ST5.1 SA2020 helmets OTHER VERSIONS OF THE STILO ST5.1: For the composite version, see the Stilo Helmets ST5.1 GT Composite Helmet. For the FIA 8860-2018 version, see the Stilo Helmets ST5 GT Zero 8860-2018 Carbon Helmet. An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements, and order your helmet based on the largest of those measurements. This helmet will ship to you with signature required for delivery.
Bell RS7C LTWT Carbon Fiber Helmet SA2020
Bell Bell RS7C LTWT Carbon Fiber Helmet SA2020 $1,999.95
  Bell RS7C LTWT Carbon Fiber Helmet SA2020 Based on the HP7 design and featuring a lightweight carbon composite shell using Bell‚Äôs high-pressure proprietary molding system, the RS7 LTWT Carbon uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance, and energy absorbing capabilities. The Double Screen Anti-Fog (DSAF) shield and rubber gasket seal ensure air, water, and dust will not enter the eyeport. FEATURES Aerospace-grade, ultra-lightweight carbon fiber shell. Snell SA2020 approved. Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance. Multi-purpose fit system that can be used with or without included ear cups. Optical grade injection molded Double Screen Anti-Fog (DSAF) visor. Top and chin bar ventilation system with 14 air intake and extraction channels. Interior ventilation channels enhanced to maximize airflow. Shell and shield design optimized to improve aerodynamic performance. Integrated channels in face piece offer multiple options to install drink tube and radio systems. Top spoiler, top and chin bar gurneys available separately. Top air attachments available separately. Factory installed HANS anchors. Synthetic rubber gasket seal to prevent dirt and water from entering the helmet. Shield and pivot kit: SE07, SV(SE07). Color: Carbon Matte Clear. Sizes: 7 1/8- (57-) to 7 5/8+ (61+). All sizes shown in centimeters.
Schuberth SP1 Carbon Fiber SA2020 Helmet
Schuberth Schuberth SP1 Carbon Fiber SA2020 Helmet $1,949.00
Schuberth SP1 Carbon Helmet SNELL SA2020 & FIA 8859-2015 With nearly 100 years dedicated to developing head protection solutions -- and 20 years of providing the most technologically advanced helmets to top drivers in F1, IndyCar and other top series -- Schuberth presents its first motorsport helmet with both FIA 8859-2015 and SNELL SA2020 certifications: the SP1 Carbon. AERODYNAMICS & VENTILATION The SP1 Carbon was developed with extensive wind tunnel testing to achieve ideal aerodynamics and optimum air flow. It offers a perfect aerodynamic balance that can be customized with various spoilers and ventilation scoops to meet the requirements of every type of racing. With 12 ventilation channels across the SP1's shell, optimum circulation is achieved through aerodynamic design and air flow channels built into the EPS (interior padding), providing the ideal flow for intake of cool air and exhaust of hot air. COMMUNICATION SYSTEM READY Channels in the cheek pads allow for easy installation of radio communications. A full selection of plug & play integrated electronics are available as options. From comfortable ear cup speakers to a 3.5mm jack for your ear buds -- or a system with both! -- you can choose a mic integrated into your chin pad or a boom mic. Schuberth helmet communications options make it easy to seamlessly integrate your race comms.  FULL CARBON SHELL & 3MM VISOR Every SP1 Carbon helmet is produced in Schuberth's own factory in Italy, by the same hands that produce the masterpiece SF3 FIA 8860-2018 ABP helmets used by many F1 drivers. The SP1 uses an exclusive, autoclave-cured carbon fiber shell handcrafted to create a unique helmet combining light weight, solid construction and superior safety in an iconic design. The SP1's 3D Injected visor is directly derived from their F1 expertise, offering 12 hues ranging from transparent to dark with several mirroring and multi-layered coating options. All standard visors are Pinlock 120 lens equipped for optimum fog resistant performance. External tear-off buttons are also installed. AVAILABLE ACCESSORIES Schuberth SP1 Top Air Schuberth SP1 Individual Vent Scoops Schuberth SP1 Visors Schuberth SP1 Scoops Shuberth SP1 Helmet Bag Schuberth SP1 Visor Pouch WEIGHT Small shell (XS, S, M, L): 3.0 lb (1.36 kg) Large shell (L+, XL, XXL): 3.2 lb (1.46 kg)
Bell RS7 Carbon Fiber Helmet SA2020
Bell Bell RS7 Carbon Fiber Helmet SA2020 $1,499.95
Bell RS7 Carbon Fiber Helmet SA2020 The Bell RS7 Carbon Fiber SA2020 helmet features Bell’s high-pressure, proprietary molding system based on the innovative HP7 design. This ultra-lightweight carbon shell is designed for optimum acoustic comfort, energy absorbing capability, and gives the Bell RS7 Carbon Fiber SA2020 helmet ideal aerodynamic performance. Top forced air inserts improve internal ventilation while the hollow synthetic rubber gasket seal ensures that air, water, and dust won’t enter the helmet in outdoor environments. The Bell RS7 Carbon Fiber SA2020 helmet’s advanced ventilation system features 14 intake and extraction channels with air intake covers in a refined aero design for the most discerning racers. FEATURES: Snell SA2020 and FIA 8859-2015 homologation. Includes clear SE07 3MM DSAF shield (SV SE07 pivot system) and DSAF anti-fog insert. Ultra-lightweight carbon fiber shell, high-pressure molding system improves shell strength. 14 intake and exhaust channels provide amazing ventilation. Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection. Improve high-speed aerodynamic stability with optional chin bar and top Gurneys and rear spoiler (sold separately). Top forced-air inserts including eyeport, eight-hole and ten-hole options when used with forced air system (sold separately). Integrated channels for optional integrated drinking tube and radio microphone systems. Ultra-plush grey Comfort-Max FR® interior fabric provides superior moisture wicking. Pro-style, multi-density foam interior with contoured cheek pads for professional fit. Narrow eye port. M6 terminal hardware and hex wrench for Head and Neck Restraint anchors. This helmet will ship to you with signature required for delivery.
Bell GT6 Carbon Fiber Helmet SA2020
Bell Bell GT6 Carbon Fiber Helmet SA2020 $1,249.95
Bell GT6 Carbon Fiber Helmet SA2020 Derived from HP6, the GT6 CARBON features the same modern and aggressive design, developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an ultra-lightweight Premium carbon shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. It can be fitted with optional earcups providing optimal noise insulation, with fully integrated radio communication kit and hydration systems (available separately or in RD version). FEATURES Ultra-lightweight Premium Carbon Composite shell Wide eyeport opening for optimal vision in closed cockpit cars Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Integrated channels in face piece offering multiple options to install drinking tube, valves, and radio systems Extraction vents to maximize cooling and air circulation Factory installed Hans anchors as original equipment Optional Top and Side air intakes available for use with external cooling system Optional earcups for increased noise insulation Interior: Dark Grey High Strength – High Comfort FR Fabric Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order) Color: Carbon, Gloss Finish Homologation: FIA8859-2015 & Snell SA2020 Sizes: 6 3/4 (54) to 7 5/8+ (61+) IN THE BOX GT6 Carbon Clear SE06 3mm DSAF Shield Installed Drawstring Helmet Bag Plastic Tearoff Posts Installed Hex Wrench Key
Stilo ST5.1 GT Offshore Composite Helmet SA2020
Stilo Stilo ST5.1 GT Offshore Composite Helmet SA2020 $1,234.95
Stilo ST5.1 GT Offshore Composite Helmet SA2020 Note: This helmet includes communications in the left port. Stilo ST5 GT SA2020 Offshore Composite Helmet OrangeThe legend returns. The SA2020 Stilo ST5 GT helmet carries over everything that made the SA2015 version one of the most-loved helmets on the grid. Featuring the same tall eye-port and iconic side ports of the previous generation, the SA2020 ST5 GT from Stilo is worth getting excited about. This Offshore variant is already wired up for communications, and sports a bright orange shell, making it easy to spot. Stilo ST5 GT SA2020 Offshore Composite Helmet Orange Details:Manufacturer: StiloManufacturer part number: DA0702BF2TColor: OrangeM6 Nut Washer for HANS and other neck restraintsRating: SA2020Shield lock position: CenterReplaceable cheek pads: YesSizes: X-Small - XXX-Large (54 - 64 cm) This is a slightly heavier version of the ST5 Carbon helmet. It is made from a Kevlar Multi-Sandwich Fiber composite formed in an autoclave. It carries the same Snell SA2020 certification as the Carbon helmet, but the different material adds the weight. This different material yields a slightly heavier helmet, but at a reduced cost. The Snell SA2020 rating satisfies almost all racing sanctioning bodies’ requirements for helmet certifications.Available with integrated electronics, top- or side-forced air supply, hydration, or any combination of the three, this helmet offers flexibility while maintaining a clean cabin. There are no wires or hoses hanging down below the helmet – everything integrates seamlessly with the shell of the helmet.Features an M6 nut integrated into the shell to interface with Head and Neck Restraint Systems.All Stilo shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a microfiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single-pass works best. Repeat if necessary, but usually, one pass works great.Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. We have found that customers who had previously worn a 59cm (Large) ST4 helmet are most comfortable in a 60cm (Large Plus) which utilizes the larger shell size. If you have any version of ST5 (composite, carbon, offshore or FIA 8860) the sizing is true and you should stay with the same size. Note: There are many things we can do to adjust your helmet fit. Obviously the best thing is to come into our show room and try on the helmets, but many times, that is just not possible. One of the great things about Stilo helmets is the adjustability with helmet padding. Crown padding, Cheek padding and different ear muff sizes are all available. Please contact a DiscoveryParts helmet expert at 888-748-7223. INTEGRATED FLEXIBILITY The Stilo ST5.1 GT Composite is unsurpased in built-in flexibility. Its two side ports can be fitted with 3 different types of integrated communication electronics, forced air, helmet eject system, or a hydration system. Thanks to its innovative shell design, mounting and routing these options to the ST5.1 GT is sleek and seamless. When not in use, you don't even know the features are there. Whether you're using side-mounted communications, side air, or a built-in hydration kit for staying hydrated during long enduro stints, everything is neat, tidy and completely out of the way when not needed. Stilo offers simply the best modular racing helmet on the market. Industry-standard M6 threaded receivers are molded into the helmet shell to accommodate anchors for whichever head-and-neck restraint you use. Size Note: We have found that customers who typically wear a size 59 helmet are most comfortable in size 60, which uses the large shell. Please order accordingly. FEATURES: Includes noise attenuating earmuffs to reduce exterior noise and maximize effectiveness of communications with your crew. Select communications, forced air, hydration or eject options now, or add them later. New 2020 Snell Certification offers increased protection for all head forms at higher g-forces and speeds All Existing Stilo ST5 shields and other accessories work on new ST5.1 SA2020 helmets All sizes shown in centimeters An effective helmet is one that fits properly. Have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head, starting at a point about an inch above the eyebrows and around a point in the back of the head that results in the largest measurement, finally wrapping back around to the front. It's a good idea to take a few measurements and order your helmet based on the largest. This helmet will ship to you with signature required for delivery.
Bell BR8 Carbon Fiber Helmet SA2020
Bell Bell BR8 Carbon Fiber Helmet SA2020 $1,199.95
  Bell BR8 Carbon Fiber Helmet SA2020 Designed for off-road and dirt forms of racing, the versatile and ultra-lightweight BR8 Carbon can be used in multiple configurations including standard, left or right side forced air, left or right 3/4 top forced air, or top forced air. Utilizing an innovative kit system (included with the helmet), racers can customize the BR8 Carbon to adapt to different forms of racing and seat configurations providing the ultimate flexibility in one model. The BR8 Carbon features an aerodynamic front duckbill, Double Screen Anti-Fog (DSAF) insert to create a positive visor seal and prevent shield fogging, and rear-facing Venturi airflow vents that prevent dust from entering the helmet while still allowing forced air to be introduced into the helmet. The BR8 Carbon features a unique air chamber system that evenly distributes airflow around the head regardless of the top air configuration used. The helmet can be used with or without ear cups.         FEATURES Lighweight Carbon Shell FIA 8859-2015 and Snell SA2020 approved Integrated channels in face piece offer multiple options to install drink tube and radio system Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance. Multi-purpose fit system that can be used with or without included ear cups. Includes front duckbill to enhance aerodynamic performance Interior ventilation channels enhanced to maximize airflow Can be converted to left or ride side air, 3/4 left or right top air, or top air by using a versatile kit system (included) with forced air nozzle and cover plates Integrated channels in face piece offer multiple options to install drink tube and radio systems. Comes with standard rear-facing vents that create a Venturi effect allowing air to exchange and circulate in the helmet while preventing dust and dirt from entering Interior: Dark grey high strength and high comfort fire resistant fabric Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Shield and pivot kit: SRV-8 Color: Carbon Gloss Clear Sizes: 7 1/8- (57-) to 7 5/8+ (61+) All sizes shown in centimeters
Bell GP.3 Carbon Fiber Helmet SA2020
Bell Bell GP.3 Carbon Fiber Helmet SA2020 $1,199.95
  Bell GP.3 Carbon Fiber Helmet SA2020 The Bell GP.3 Carbon Fiber Helmet SA2020 is ideal for open-environment racers who need maximum ventilation and clear vision in complex racing environments. This helmet has traditional F1 styling, an ultra-lightweight Carbon shell, and a dynamic air intake system for cutting-edge aerodynamic performance. The¬†Bell GP.3 Carbon Fiber Helmet SA2020 is a top pick for formula, kart, and all types of open wheel racers who value comfort, performance, and professional-level features. This helmet now has improved shield integration, a rubber gasket seal, manual lever closable air vents, and a double-screen, anti-fog (DSAF) visor to accommodate any tough race in the elements. FEATURES: Snell SA2020 and¬†FIA 8859-2015 homologation. Includes clear SE03 3MM DSAF shield (SV SE03/05 Pivot System) with DSAF anti-fog insert. Ultra-lightweight carbon shell with improved shell strength from high-pressure molding. Direct-flow chin vents and manual air intakes provide exceptional ventilation. Chin bar Gurney (duckbill) improves aerodynamic performance. Ambient noise reduction options with ear cup configuration. Hollow synthetic rubber gasket seals out water, dust, and dirt. Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection. Integrated drinking tube systems and integrated channels for optional radio microphone systems. Ultra-plush grey Comfort-Max FR¬Æ¬†interior fabric improves moisture wicking. Contoured cheek pads for professional fit. Includes M6 HANS-device hardware and hex wrench.   This helmet will ship to you with signature required for delivery.
Bell GTX.3 Carbon Fiber Helmet SA2020
Bell Bell GTX.3 Carbon Fiber Helmet SA2020 $1,199.95
          Bell Racing Helmets GTX.3 Carbon Helmet SA2020 The sleek, aerodynamic Bell Racing Helmets GTX.3 Carbon Helmet SA2020 features an ultra-lightweight carbon fiber shell, a front chin-bar gurney and an integrated rear wing to provide the open-cockpit driver with improved aerodynamic performance and high-speed stability. The Bell Racing Helmets GTX.3 Carbon is ideal for use in dusty, open-wheel environments with its integrated shield, double screen anti fog (DSAF) visor, rubber gasket seal, and rear-facing vents to help with air exchange and provide clear vision while racing in the elements. This stylish helmet carries Snell SA2020 approval, FIA 8859-2015 Homologation, and comes with M6 terminal hardware for your Head and Neck Restraint (HANS) device. These safety and comfort features make the Bell Racing Helmets GTX.3 Carbon Helmet SA2020 is ideal for dirt track, karting, open-wheel, formula, and all types of open-compartment racing where clean, distraction-free airflow is essential for competition. FEATURES Snell SA2020 and¬†FIA 8859-2015 homologations. SE03 3mm DSAF clear shield (SV SE03/05 pivot system). Ultra-lightweight carbon fiber construction with improved shell strength from high-pressure molding system. Drive confidently with sleek aerodynamic styling with integrated wing. Venturi airflow system allows air exchange while preventing dust and dirt from entering the helmet. Chin bar Gurney (duckbill) improves aerodynamic performance. Hollow synthetic rubber gasket seal keeps out dust, dirt, and water. Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection. Install integrated drinking tube systems and radio microphone systems (sold separately) with integrated channels in the face piece. Ultra-plush grey Comfort-Max FR¬Æ interior improves comfort and moisture wicking. Pro-style, multi -foam density interior with contoured cheek pads for professional fit. Standard-size eye port. Double Screen Anti-Fog (DSAF) visor insert for improved anti-fog performance. M6 terminal hardware and hex wrench for Head and Neck Restraint devices All sizes shown in centimeters This helmet will ship to you with signature required for delivery.
Bell M.8 Carbon Fiber Helmet SA2020
Bell Bell M.8 Carbon Fiber Helmet SA2020 $1,099.95
Bell M.8 Carbon Fiber Helmet SA2020 The Bell M.8 Carbon Fiber SA2020 is designed with comfort in mind while keeping with traditional Bell M style. Its large eye port opening and adjustable forehead vents to reduce potential fogging are designed for the driver who wears sunglasses or eyeglasses. The Bell M.8 Carbon Fiber SA2020 is available in seven sizes, from XS to XL+, providing a near-custom fit with a wide spectrum of sizes. The helmet is certified for use with HANS devices with integrated M6 female threaded inserts for HANS post anchors, which are sold separately. The Bell M.8 Carbon Fiber SA2020 includes a clear face shield and black visor strip, shield hardware with a hex wrench, and a drawstring helmet bag to keep it all together. Snell SA2020 and FIA 8859-2015 approved. FEATURES: Snell SA2020 and FIA 8859-2015 homologated. Carbon fiber shell is ultra-lightweight (Size M = 2.9 lbs./1.3 kg). High-pressure molding system improves shell strength. High-impact custom bead absorbing liner is multi-piece/multi-density for low- and high-velocity impact protection. Integrated channels for optional drinking tube and radio microphone systems. Black Comfort-Plus FR® interior fabric for excellent moisture wicking. Exceptional fit with multi-density foam interior. Best-in-class ventilation system includes direct-flow chin vents and manual level air intakes. Hollow synthetic rubber gasket seal keeps out water, dust, and dirt. Large eye port for eyeglass wearers. Includes clear SRV-8 3mm SRV shield (SRV-1 pivot system). Tinted shields also available . M6 terminal hardware and hex wrench for Head and Neck Restraint anchors. Available only in carbon fiber finish. This helmet will ship to you with signature required for delivery.
Arai GP-7 Helmet SA2020
Arai Arai GP-7 Helmet SA2020 from $1,069.95
Arai GP-7 SA2020 Helmet A driver favorite, the Arai GP-7 SA2020 helmet combines the most popular Arai features with new, improved upgrades. The¬†GP-7 is constructed with Arai‚Äôs own PBcLc (Peripherally Belted Complex Laminate) shell construction and the same shell shape as the Formula 1 grade GP-7SRC model. New ventilation, a soft EPS liner, and a wider eye port for optimized peripheral vision are part of this new shell which gives the driver notable strength and flexibility. Replaceable cheek pads make racing comfortable for any driver, as do the three larger, closeable intake vents and two larger exhaust vents on the ventilation system. The¬†GP-7 helmet is Snell SA2020 certified with factory-installed M6 washers/nuts. Drivers of any skill level can install their own Head and Neck Restraint system using a 6mm bolt. The FIA-8859-2015 certification sticker is applied to the interior liner of the helmet. POSITIVE SHIELD LATCH Simple yet effective, the positive latch mechanism on the¬†GP-7 SA2020 helmet gives the driver solid shield latching, but is seamlessly integrated into the standard shield system for ease of use. NEW SHIELD PIVOT HARDWARE The¬†GP-7 SA2020 features new shield pivot hardware with improved aerodynamics based on the updated track slider design. An increased peripheral field of view is featured on the 6 series, which surpasses the 5 series in visibility. The wider eye port, shield, and pivot hardware were all developed on the RC and adapted to the¬†GP-7 SA2020 helmet. VENTILATION Increased airflow is key to the¬†GP-7 SA2020 helmet‚Äôs design. This includes bigger, closeable intake vents with large 10mm holes in both front and rear. Larger rear vents also provide better airflow. M6 ANCHORS Drivers of all skill levels will appreciate the integrated, pre-installed M6 threaded washer/nut with 6mm threads which accepts a range of Head and Neck Restraint devices. A flat surface area around the mounting nut will let the anchor post base to rest flush along the surface of the helmet and around the full perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material. NEW CHINBAR The GP-7 SA2020‚Äôs new, ergonomic chinbar and ridge at the bottom edge of the shell lowers the center of gravity and increases the structural integrity of the helmet. Additional improvements include a rise in the shell above the shoulders for increased clearance. EJECT READY CROWN PAD Arai's optional Eject system can be easily accommodated via a pre-cut pocket under the helmet‚Äôs crown pad.¬†   An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one. This helmet will ship to you with signature required for delivery.
Sparco Sky RF-7W Carbon Fiber Helmet SA2020
Sparco Sparco Sky RF-7W Carbon Fiber Helmet SA2020 $1,049.00
SNELL SA2020 The Sparco helmet line is a result of over 40 years of research and development experience, including wind tunnel testing. The new range was designed to meet the requirements of the new SNELL SA2020 and FIA 8859-2015 ratings. The 2020 type-approval introduces new impact requirements, the helmets need to dissipate large amounts of energy in different ways. To meet these requirements Sparco is introducing new innovations for driver safety and comfort. All shells now have layers of carbon-Kevlar for greater strength. The helmets have also been wind-tunnel tested to maximize exterior vent placement and flow. The EPS interiors and padding have also been redesigned for increased airflow and driver comfort. Sparco also introduces a new size: Medium/Large. This M/L size takes advantage of using the smaller shell which is lighter and more compact.    SKY RF-7W The Sky RF-7W has a carbon fiber outer shell reinforced with layers of carbon-Kevlar. It includes a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase circulation to a redesigned interior. The interior has channels which not only cool the driver, but has additional channels which route air towards the visor, which reduces the chance of visor fogging. Sky RF-7W has removable, washable padding that can be repositioned for a comfortable fit. All interior seams have been removed from areas where greater pressure is exerted on the head. The Sky RF-7W has been designed to accommodate a drink tube and an intercom system. Available in sizes XS to XL (new size M/L) with a red or black interior. Sky RF-7W has Hans clips pre-installed. SNELL 2020 and FIA 8859-2015 approved.   TECHNOLOGY Red or black interior option Light-weight carbon fiber  with carbon-kevlar base layers New Medium/Large size which uses the lighter and more compact shell Hans clips pre-installed Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Pre-molded interior to accommodate drink tubes and an intercom system SNELL SA2020 and FIA 8859-2015 approved An effective helmet is one that fits properly. Have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head, starting at a point about an inch above the eyebrows and around a point in the back of the head that results in the largest measurement, finally wrapping back around to the front. It's a good idea to take a few measurements and order your helmet based on the largest. This helmet will ship to you with signature required for delivery.
Sparco Sky RF-7W Carbon Fiber Helmet SA2020
Sparco Sparco Sky RF-7W Carbon Fiber Helmet SA2020 $1,049.00
SNELL SA2020 The Sparco helmet line is a result of over 40 years of research and development experience, including wind tunnel testing. The new range was designed to meet the requirements of the new SNELL SA2020 and FIA 8859-2015 ratings. The 2020 type-approval introduces new impact requirements, the helmets need to dissipate large amounts of energy in different ways. To meet these requirements Sparco is introducing new innovations for driver safety and comfort. All shells now have layers of carbon-Kevlar for greater strength. The helmets have also been wind-tunnel tested to maximize exterior vent placement and flow. The EPS interiors and padding have also been redesigned for increased airflow and driver comfort. Sparco also introduces a new size: Medium/Large. This M/L size takes advantage of using the smaller shell which is lighter and more compact.    SKY RF-7W The Sky RF-7W has a carbon fiber outer shell reinforced with layers of carbon-Kevlar. It includes a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase circulation to a redesigned interior. The interior has channels which not only cool the driver, but has additional channels which route air towards the visor, which reduces the chance of visor fogging. Sky RF-7W has removable, washable padding that can be repositioned for a comfortable fit. All interior seams have been removed from areas where greater pressure is exerted on the head. The Sky RF-7W has been designed to accommodate a drink tube and an intercom system. Available in sizes XS to XL (new size M/L) with a red or black interior. Sky RF-7W has Hans clips pre-installed. SNELL 2020 and FIA 8859-2015 approved.   TECHNOLOGY Red or black interior option Light-weight carbon fiber  with carbon-kevlar base layers New Medium/Large size which uses the lighter and more compact shell Hans clips pre-installed Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Pre-molded interior to accommodate drink tubes and an intercom system SNELL SA2020 and FIA 8859-2015 approved An effective helmet is one that fits properly. Have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head, starting at a point about an inch above the eyebrows and around a point in the back of the head that results in the largest measurement, finally wrapping back around to the front. It's a good idea to take a few measurements and order your helmet based on the largest. This helmet will ship to you with signature required for delivery.