Stilo
Stilo ST5 Helmet Shields
from $143.95
Stilo Anti-Fog/Anti-Scratch Visor for the ST5 Helmet
Stilo ST5 visors fit all Stilo SA2020, SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 10 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. From the Stilo dark smoke to a selection of multiple iridiums, Stilo ST5 visors are a great way to ensure your best vision and lap time.
Stilo ST5 GT Visor Part Number Chart:
STI-YA0800 ST5 Clear Visor
STI-YA0801 ST5 Smoked medium visor
STI-YA0802 ST5 Smoked dark visor
STI-YA0803 ST5 Mirror medium visor
STI-YA0804 ST5 Mirror dark visor
STI-YA0805 ST5 Iridium blue medium visor
STI-YA0806 ST5 Iridium blue dark visor
STI-YA0807.2 ST5 Iridium red medium visor
STI-YA0808 ST5 Iridium red dark visor
STI-YA0809.2 ST5 Iridium yellow medium visor - Not FIA Certified
STI-YA0810 ST5 Iridium yellow dark visor - Not FIA Certified
STI-YA0813 ST5 Amber visor - Not FIA Certified
STI-YA0814 ST5 Clear double glazed visor - Dirt / Offroad Friendly
STI-YA0815 ST5 Clear double glazed visor - Not FIA Certified
STI-YA0816 ST5 Sun screen short visor
STI-YA0821 ST5 Visor sun strip blocker
STI-YA0817 ST5 Visor screw kit
STI-YA0818 ST5 Visor locking pin replacement
STI-YA0851 ST5 Clear Anti-Scratch No Anti-Fog - Dirt / Offroad Friendly
High quality, Anti-fog visors shaped for the Stilo ST5 GT helmets. The Stilo ST5 series is unique in that the shield lock is located in the center position of the shield. The shield lock is released by squeezing the outboard sides together and that will then release it from the mount stud that is located in the center of the helmet. The reason for this is to "clean-up" the sides of the helmet where a side impact in a head containment seat may grab parts of the helmet. All Stilo ST5 shilds have the center release mechanism installed on it.All Stilo ST5 shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a micro fiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single pass works best. Repeat if necessary, but usually one pass works great.Stilo Visor Care: Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. This is the official Stilo Visor Cleaner.
Arai
Arai GP-5W Helmet Shields
from $85.25
Arai GP-5W Replacement Shields
Replacement shields for the Arai GP-5W auto racing helmet.
Arai
Arai GP-7 Helmet Shields
from $78.95
Arai GP-7 Anti-Fog Helmet Shields
Available in a variety of colors and tints, these replacement shields fit all versions of the Arai GP-7 SA2020 helmet. The GP-7 series actually fits two different Arai helmet models. The GP-7, and of course the Arai every auto racer wants, the Arai GP-7SRC. All Arai shields we offer at DiscoveryParts.com are Genuine Arai in standard, Anti-Fog, Dual Pane, and with the Arai Visor Tint Strip ontop You know how well your helmet was crafted when it was built and the same care and exacting standards are used in your new Arai GP-7 shields.
Bell
Bell 287 SRV Helmet Shields (Fits K1 Pro, K1 Sport, GP.2 Youth)
from $69.95
Bell 287 SRV Helmet Shields (Fits K1 Pro, K1 Sport, GP.2 Youth)
Bell's 3mm injection molded optically correct polycarbonate face shield. The 287 SRV 3mm shield uses the SRV-1 pivot kit, is compatible with tear offs and is available in a variety of colors. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts.
BELL 287 HELMET SHIELD TINT COLORS:
Clear
Light Smoke
Dark Smoke
Amber
Silver Mirror
Blue Mirror
Gold Mirror
Bell
Bell SE03 Helmet Shields (Fits GP.3 and GTX.3)
from $99.95
Bell SE03 Helmet Shields (Fits GTX.3, GP.3, HP3)
Bell SE03 Double Screen Anti-Fog (DSAF) helmet shields are specifically designed for the SA2015 Bell GP.3 and GTX.3 helmets (including carbon fiber models), and the SA2010 Bell HP3 Carbon Helmet. The Double Screen Anti-Fog treatment features variable thickness that exceeds 5mm in the field of vision for excellent clarity and fog-control. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.)
BELL SE03 HELMET SHIELD TINT COLORS:
Clear
High-Resolution Amber
Light Smoke
Dark Smoke
Blue Chrome
Silver Chrome
Gold Chrome
Rainbow Mirror
Red Metallic
Multilayer Red, Blue or Green
Bell
Bell SE06 3mm Helmet Shields (Fits HP6, GT6)
from $99.95
Bell Racing Helmets SE06 3mm Helmet Shield
Bell SE06 helmet shields are specifically designed for the SA2020 Bell HP6 and GT6 helmets. These 3mm injection-molded optically correct polycarbonate face shield with Double Screen Anti-Fog (DSAF) insert for superior fog control.
Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.)
Bell
Bell SE07 3mm Helmet Shields (Fits RS7, RS7-K, HP7)
from $99.95
Bell Racing Helmets SE07 3mm Helmet Shield
Bell SE07 helmet shields are specifically designed for the SA2020 Bell RS7 and HP7 helmets. These 3mm injection-molded optically correct polycarbonate face shield with Double Screen Anti-Fog (DSAF) insert for superior fog control. The SE07 shield uses the SV (SE07) pivot kit, is compatible with tear offs, and is available in a variety of tint colors.
Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.)
DOES NOT FIT KC7-CMR. KC7 helmets require the SE07 2mm shield.
AVAILABLE TINT COLORS FOR BELL RACING SE07 VISOR:
Clear
Light Smoke
Dark Smoke
Yellow
Silver Mirror
Blue Mirror
Rainbow Iridium Mirror
Multi-Layer Blue
Multi-Layer Red
Bell
Bell SRV-8 Helmet Shields (Fits M.8)
from $69.95
Bell SRV-8 Helmet Shields (Fits M.8)
The Bell SRV-8 is a 3mm injection-molded, optically correct polycarbonate face shield. The SRV-8 3mm shield uses the SRV-1 pivot kit (not included), is compatible with tear offs, and is available in a variety of tint colors and mirror finishes. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.)
BELL SRV-8 HELMET SHIELD TINT COLORS:
Light Smoke
Dark Smoke
Amber
Silver Mirror
Blue Mirror
Clear
HJC
HJC Helmet Shields
from $69.99
HJC AR-10 III and HX-10 III Replacement Shields
Polycarbonate injection molded construction for superior visibility and durability.
Hard coated anti-fog interior.
Pre-installed tear off posts.
Available in Dark Blue, Chrome, Amber, Dark Smoke, and Clear.
Genuine HJC Helmet Shields and Parts bring new life to your HJC auto racing helmet. HJC shields in different tints keep you ahead of the pack in every racing condition.
Racing Optics
Racing Optics (X-Stack) - 2 mil Perimeter Seal Laminated Tearoffs XStack™ 10 (Clear)
$43.95
Racing Optics (X-Stack) - 2 mil Perimeter Seal Laminated Tearoffs XStack™ 10 (Clear)
The Perimeter Seal system is the latest technology from Racing Optics which allows for a tighter seal to visor, blocking out dirt, dust and water from behind the stack.
The XStack™ is a stack of 10 laminated Tearoffs that are 2 mil thick each.
The laminated technology creates a distortion-free optical lens.
Each package contains 3 stacks of 10 Tearoffs for a total of 30 Tearoffs. Clear.
Fits: (Bell: BR8, Dominator.2, GTX.2, GP.2, GP.2 Youth, M.8, 287 Shield) / (Zamp: FS-2, Z-15 Shield, Z-20 Shield, Z-70, FS1.2 RZ) / (RJS) / (G-Force: Revo, Rift, Rookie)
Racing Optics
Racing Optics (X-Stack) - 2mm Laminated Tearoffs X-Stack
$39.95
Racing Optics (X-Stack) 2mm Laminated Tearoffs X-Stack™ 10 (Clear)
The XStack™ 10 is a stack of 10 laminated Tearoffs that are 2 mil thick each. The laminated technology creates a distortion-free optical lens. Each package contains 3 stacks of 10 Tearoffs for a total of 30 Tearoffs. Clear.
RAO-10206C Fits:
Bell: Dominator.3, GTX.3, GP.3, GT.5 Touring, HP.3, HP5 Touring, B2 Apex, B2 Vision, SE03 Shield, SE05 Shield
ROP10203C Fits:
HJC H10 & AR10-III
Racing Optics
Racing Optics (X-Stack) - Bell 287 SRV, SRV-8 and Roux R-1 Helmets
$36.95
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmet Shields
Racing Optics has the most optically advanced tearoff technology. 10 layer "distortion free" laminated tearoff system for the Bell 287, SRV-8 and Roux R-1 helmets. Protect your Bell or Roux Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches.
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmets Details:
Qty in one stack: 10
Thickness: 2 mil
Stacks in one package: 3
Post centers: 12 1/8"
Shape: Banana
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmets Fitment Guide:
Fits Bell:
Bell 287 SRV Shields
Bell GTX.2 Helmets
Bell GP.2 Helmets
Bell Star Infusion Helmets
Bell Dominator.2 Helmets
Bell M.8 Composite SA2015/SA2020
Bell M.8 Carbon SA2015/SA2020
Fits Roux:
R-1 Fiberglass
R-1 Composite
R-1 Gloss Carbon
R-1 Matte Carbon
Racing Optics is a laminated tear off solution for dirt and pavement forms of racing eliminating the need to apply individual tear offs. Racing Optics has the most optically advanced tearoff technology. 10 layer "distortion free" laminated tearoff system for the Bell 287 SRV and Roux R-1 shields. Protect your Bell and Roux Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. For racers who prefer thinner tear offs, Racing Optics is available in X Stack (10 per stack) 2 mil with patterns specific to Bell Helmets including the GTX.2, GP.2, Star Infusion, Dominator.2, and all Roux R-1 helmets. Each sleeve comes with three stacks of 10 Racing Optics. (total of 30)
Racing Optics
Racing Optics (X-Stack) - Impact Helmet Shields Tear Off
$33.95
Racing Optics (X-Stack) - Impact Helmet Shields
Racing Optics has the most optically advanced tear-off technology. 10 layer "distortion free" laminated tear-off system for many Impact helmets. Protect your Impact Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches.
Racing Optics is a laminated tear-off solution for dirt and pavement forms of racing eliminating the need to apply individual tear-offs. Racing Optics has the most optically advanced tear-off technology. 10 layer "distortion free" laminated tear-off system for many Impact shields. Protect your Impact Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. For racers who prefer thinner tear-offs, Racing Optics is available in X Stack (10 per stack) 2 mil with patterns specific to many Impact helmets. Each sleeve comes with three stacks of 10 Racing Optics. (total of 30)
Racing Optics (X-Stack) - Impact Helmets Details:
Qty in one stack: 10
Thickness: 2 mil
Stacks in one package: 3
Post centers: 12 1/8"
Shape: Banana
Racing Optics (X-Stack) - Impact Helmets Fitment Guide:
Impact Vapor
Impact Vapor SC
Impact Air Vapor
Impact Charger
Impact Super Charger
Impact Draft
Scorpion Exo-R2000
Racing Optics
Racing Optics (X-Stack) -SE07
$34.95
Racing Optics (X-Stack) - Impact Helmet Shields
Racing Optics has the most optically advanced tear-off technology. 10 layer "distortion free" laminated tear-off system for many Impact helmets. Protect your Impact Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches.
Racing Optics is a laminated tear-off solution for dirt and pavement forms of racing eliminating the need to apply individual tear-offs. Racing Optics has the most optically advanced tear-off technology. 10 layer "distortion free" laminated tear-off system for many Impact shields. Protect your Impact Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. For racers who prefer thinner tear-offs, Racing Optics is available in X Stack (10 per stack) 2 mil with patterns specific to many Impact helmets. Each sleeve comes with three stacks of 10 Racing Optics. (total of 30)
Racing Optics (X-Stack) - Impact Helmets Details:
Qty in one stack: 10
Thickness: 2 mil
Stacks in one package: 3
Post centers: 12 1/8"
Shape: Banana
Racing Optics (X-Stack) - Impact Helmets Fitment Guide:
Bell RS7
Bell HP7
SKU: 10237C
Schuberth
Schuberth SP1 Visor
from $119.00
Schuberth SP1 Visor
3MM THICK VISOR 3D INJECTED
Schuberth 3mm visor derived directly from their F1 expertise. Twelve different visor shades are available from transparent to dark with several mirrored and multi-layer coating options. All standard visors are compatible with the Pinlock 120 fog resistant lens, and clear tear-off buttons are installed. Each visor comes with a soft visor pouch to protect visors when not in use.
SCHUBERTH SP1 VISOR AVAILABLE COLORS:
Light Smoked Blue
Dark Smoked Blue
Light Smoked Red
Dark Smoked Red
Light Tint
Dark Tint
Light Mirrored Silver
Dark Mirrored Silver
Clear
Clear