Image of Schroth Flexi 2x2 6 Point Racing Harness in black
Schroth Schroth Flexi 2x2 6 Point Racing Harness $549.00
Schroth Flexi 2x2 6 Point Racing Harness  2028 Expiry Schroth Flexi 2x2 6 Point Hans Harness is our #1 selling Hans harness. 2" for every belt, adjusters in all positions (even on the sub-belt) and the best harness material you will ever put in your race car. Schroth Flexi 2x2 6 Point Hans Harness Details: Manufacturer: Schroth Colors: Black, Blue, Red, Silver, Yellow Shoulder belt width: 2" Waist belt width: 2" Sub belt width: 2" Shoulder belt attachment: Wrap (around harness bar) Waist belt attachment: Snap ends (eye bolts & washers included) Sub belt attachment: Snap ends (eye bolts & washers included) Ratings: FIA 8853-2016 Approved Valid through 2028 Schroth Part Numbers Black: SR-94530-0 Blue: SR-94530-1 Red: SR-94530-2 Silver: SR-94530-9 Yellow: SR-94530-H3 Schroth Flexi 2x2 6 Point Hans Harness Shoulder Belts: This is the first thing a Profi II racer is going to notice - the shoulder belts. Instead of going from 2" from the adjuster up and 3" from the adjuster down, the Profi 2x2 has a full length 2" width shoulder belt. At first, being a racer who does not like change, I wanted my same 3/2" shoulder belt. Upon sitting in a race seat and mounting the harness, Schroth actually improved on something I thought did not need improvement. Easy to lay up on my Hans device, are a little lighter, and the new small adjusters are nice. Actually, really nice. I like the new lightweight adjusters better than my Profi II. This is a nice upgrade I did not know needed upgrading. The shoulder belt camlock ends are still keyed (angled) for individual left and right to keep driver comfort at a maximum, no matter how large or small the driver is. We love this feature on all Schroth belts. Schroth Flexi 2x2 6 Point Hans Harness Waist Belts: At first look, you would say that the waist belts are the same as the old Profi II. If you did say that, you are correct. Schroth maintained the great flexibility of the Profi II waist belts to ensure they could be installed in a pull-up or pull-down configuration. You simply unwrap and remove the chassis snap end and cam-lock end and swap them around. Re-wrap like you just unwrapped and you now have a pull-up harness. Race prep shops love this feature as one part number can be configured for every driver preference. Schroth Flexi 2x2 6 Point Hans Harness Waist Belts 2" vs 3": All Schroth Flexi Belts are 2" (50mm) wide and are more effective than the 3" (75mm) waist belt. Why is 2" webbing more effective than 3" webbing? Let's start looking at the shape of our human body. The Iliac Crest (IC) is the part of the pelvic bone that sticks out above the hips. 2" webbing fits entirely within the recession created by the Iliac Crest where 3" webbing rides over the top of the Iliac Crest. Because of this, the 3" webbing has less contact area by percentage than the 2" webbing which will cause more bruising during an impact where the belt is making contact with the pelvic bone. Since the 2" webbing rides inside the Iliac Crest, it can be worn as much as 1" to 1.5" tighter and at the same time is more comfortable for the driver. Since the 2" webbing fits well within the Iliac Crest of the pelvis, it is less likely to slide up above the crest and cause submarining, a condition where the body slides down below the lap belt possibly causing internal organ damage. Research shows that the faster the pelvis is captured, the lower the resultant loads on the chest, head, and neck. There is no difference in the strength of the 2" webbing vs the 3" webbing. All webbing - 2" or 3" - must meet the same FIA homologation test loads. There is an additional benefit of the 2" lap belts. The required force to properly and tightly adjust the belts in the car is much easier than with 3" belts. We here at DiscoveryParts love and prefer the Schroth 2" waist belt system. Schroth Flexi 2x2 6 Point Hans Harness Camlock: Different or the same? The buckle looks like our old reliable Schroth Profi cam lock in non-glare matte black, and looks and feels the same externally. The upgrade is an increase amount of force required to turn the buckle. It is solidly positioned and has a very sharp snap when releasing. Nothing too drastic, if you start turning the camlock (in either direction) it just is tight, tight, tight, and boom - released. Actually there is no boom, it just releases cleanly. Schroth Flexi 2x2 6 Point Hans Harness Sub Belt: Schroth Flexi 2x2 6 point harness has a dual sub strap system with T bar camlock connection. For comfort, Schroth uses a double dog leg fabric style that lets the flat part of the belt touch you, not the side. Safety is #1 with Schroth and comfort is elevated beyond any other harness competitor. Going back to safety, the buckle position is not just important, but paramount. For the loading of the belts to be properly spread over your pelvis, Iliac crest, and upper torso, we need the buckle to be positioned correctly on the driver. To help position the belt easily the first time and quickly fine-tune the position for a multiple driver car, Schroth added two adjusters for you. Sub-belt install time of a Schroth harness is 70% less than competitor harness sets.
Sabelt Steel Series 2 Inch Rally Harness black
Sabelt Sabelt Steel Series 2 Inch Rally Harness $329.00
Sabelt Steel Series 2 Inch Rally Harness Featuring full-length 2" belt webbing, super-strong steel adjusters, and Sabelt's innovative and patented cam-lock buckle, the Steel Series are among our favorite six-point harnesses for safety, craftsmanship, and comfort. With a market-leading price tag, the Sabelt Steel Series represent great value as well! FEATURES: FIA 8853-2016 Approved Shoulder straps: full 2’’ width, steel adjuster Shoulder mount: snap hook / tri-bar Lap belts: full 2’’ width, steel adjuster Crotch belt: full 2’’ width - snap hook / tri-bar mounting Pull-up lap adjusters Snap hook mounting New compact buckle designed with crotch mount integrated into cam-lock body
Sabelt Silver Series Enduro 6 Point Racing Harness Red
Sabelt Sabelt Silver Series Enduro 6 Point Racing Harness $579.00
Sabelt Silver Series Enduro 6 Point Racing Harness Includes both pull-up and pull-down lap belts, offering more flexibility than any other harness on the market! Replacing the previous design which featured 2"/3" combination shoulder straps, the new Sabelt Silver Series 6-Point Racing Harness uses 2″ belts throughout, secured with lightweight aluminum hardware. The harness is easily adjusted in the cockpit with bright yellow tabs that pull down, making driver changes and cockpit ingress/egress easier than ever. The newly-designed cam lock buckle now integrates the sub belts into the fixture, heightening driver safety in the event of an impact. A number of other handy features have been added, including communication and hydration routing on top of the shoulder straps and silicone grip on the underside to keep your head-and-neck restraint device securely in place while on the track. Sabelt is an industry-leading manufacturer of motorsport harnesses and accessories, for good reason. FEATURES: FIA certified. New compact buckle is fully integrated with the sub-belts. Easily adjusted using yellow pull-down straps. Velcro patches on shoulder straps for securing loose ends. Communication/hydration routing on shoulder belts keep lines secure and out of the way.
Schroth B23A Bendable Harness Snap End Kit
Schroth Schroth B23A Bendable Harness Snap End Kit $14.95
Schroth B23A Bendable Harness Snap End Kit Schroth B23A harness ends are bendable and make racing harnesses easier where there is very little clearance. The Schroth B23A bendable snap-on harness adapter lets you bolt one end to the chassis, bend it to the needed shape, and attach your harness snap end. Schroth B23A Bendable Harness Snap End Kit Details: Manufacturer: Schroth Manufacturer part number: B23A Manufacturer alternate part number: SR 01324 Bendable Fittings: Yes (2) Bolts: Yes (2) 7/16-24 Wavy Washers: Yes (2) Combination Washers: Yes (2) The B23A End Fitting Kit is a set of bolt in brackets that are usually sewn into 2" Lap belts. Schroth slang calls it a "Rallye End" kit because it usually comes on the street legal Rallye style belts. Like the 01323 kit, it is designed to be bent. These pieces are commonly used in Porsche applications where space for an Eye bolt is insufficient. This bracket can be bolted to the car, then bent so that a Snap-In bracket can be used to fix the harness to the bracket. We use Schroth B23A brackets in many applications where stock mounting locations do not leave sufficient space, or if the thread pitch is different from the eye bolts. If you have a Miata, S2000 or are putting a large/very large seat in a full interior car this is the harness mount kit you want.
The Lifeline Copse 6 Point Racing Harness delivers extreme attention to detail such as high contrast pull down loops on both the lap and shoulder adjusters as well as the strategically placed Velcro for communication cables and/or hydration tubes. They also include both snap hook and bolt-in end fittings. black
Lifeline Lifeline Copse 6 Point Racing Harness $499.99
Lifeline Copse 6 Point Racing Harness Carrying the FIA 8853-2016 homologation standard, these high quality harnesses are designed and made in the UK at Lifeline's ISO 9001:2015 accredited factory. This ensures the high quality and attention to detail seen on the rest of Lifeline's motorsport safety systems are carried over to every feature of the Lifeline Copse 6 Point Racing Harness. This state of the art Lifeline Copse 6 Point Racing Harness features lightweight aluminum adjusters for quick and easy adjustment and release. With the added benefit of lap strap zip adjusters that are integral within the lap strap tongue, these Lifeline Copse 6 Point Racing Harnesses are the perfect choice for endurance racing when changing from one driver to another, but they're also a fantastic choice for sprint races. The Lifeline Copse 6 Point Racing Harness delivers extreme attention to detail such as high contrast pull down loops on both the lap and shoulder adjusters as well as the strategically placed Velcro for communication cables and/or hydration tubes. They also include both snap hook and bolt-in end fittings. The unique and lightweight aluminum buckle mechanism on the Lifeline Copse 6 Point Racing Harness has been designed for easy, positive latching and the buckle has been manufactured from high quality aerospace grade materials, ensuring maximum confidence from the driver that the harness is correctly and safely latched in place. Webbing: Full 2" material is used in all positions. The benefits of 2" webbing has been proven many years ago and Lifeline built this harness using the latest knowledge of racing safety data; Camlock: Lifeline uses a lightweight oversized rotary lever system to make release easy, even with gloves on. Also a very nice feature we noticed, is the ability for the lever to go "over-center" and stay in an open position. This does not seem like a big benefit, but we all have released a harness to have the lever go back to closed, still attached to one belt. Lifeline mitigates this issue with a great racer input design;Waist adjusters: Seen on all the hi-end harness systems, the "Zip" enduro driver pull-down adjuster is spring loaded to always keep tension on the waist belts, no matter how much you move around in your chassis. What makes this an enduro driver favorite is the adjuster is what clicks into the camlock. You can have a team with a 140 lb driver and a 340lb driver, the adjuster is always in the same position. From an ITC VW to a Porsche GT2 with 1200lb front springs, you will appreciate the detail on Lifeline's waist adjustment system;Chassis fittings: To make installation easy and safe, Lifeline included both bolt-on and snap-on end fittings. Lifeline uses a non-sewn/lock-bar system to make using the enclosed harness ends or wrapping around the cage easy; andBorn of Quality: Built by artisans in the UK: Not just designed in the UK and built somewhere else, the Lifeline Copse harness is both designed and manufactured in the UK at Lifeline's ISO 9001:2015 accredited factory. This harness is only available in pull-down lap belt configuration.
Schroth Enduro Six-Point Racing Harness 94510
Schroth Schroth Enduro 6 Point Racing Harness $689.00
Schroth Enduro Six-Point Racing Harness 2028 EXPIRY Endurance racing drivers need easy, fast methods to get in and out of the car during a race. The Schroth Enduro 6 Point Racing Harness uses the newest, most innovative technology to ensure quality, durability, and ease of use during quick driver changes in the most arduous conditions. The Schroth Enduro 6 Point Racing Harness is considered the fastest, easiest harness to use among many drivers. The Schroth Enduro 6 Point Racing Harness has been tested for quality and ease of use in the WEC endurance series, and in 24-hour races at legendary venues like Germany’s Nordschleife (the "Green Hell"). This Schroth Enduro 6 Point Racing Harness is at the top of its game, constructed for racers who need superior driver restraint technology. The new design of the ZIP Adjuster technology is integrated into the lap belt buckle attachments, making the position of the adjusters ideal for quick, precise tightening. The design, featuring clearly-marked belt release straps, extra large, easy-to-see, yellow hand loops on the lap belts, also ensures efficient, smooth releases and tightenings for quicker, easier driver changes. The Schroth Enduro 6 Point Racing Harness has these Zip Adjusters on the shoulder belts. A first choice for racing schools or corporate ride-along days where transitioning customers in and out of the racecar means more drivers per session! The Schroth Enduro 2X2 6 point race belt is Schroth's top-of-the-line racing harness for Endurance racing. The Schroth Enduro belt features the widely praised ZIP Adjusters integrated into the lap belt buckle attachments to optimize the position of the adjusters for perfect and fast adjustment. The rotational design of the ZIP Adjusters allows for exceptional ease of adjustment (tightening) and release for faster and smoother driver changes.The Schroth Enduro 2X2 6 point harness is designed specifically for when fast driver changes are needed in endurance racing. The lap belt straps have large, easy to grab adjuster loops for the easiest adjustment. Newly designed compact aluminium rotary buckle features a quicker, more positive “click” and an ergonomic release lever.One of the main features of the Enduro 2X2 belt systems is the 2" (50mm) lap belt for added safety over 3" designs. A 2" belt rides within the crest of the human pelvis where a 3" belt would rest on the edges. This allows you to get the belt up to an inch and a half tighter. That means the lap belt will be working earlier in an accident because it gets loaded faster. It's also more comfortable and easier to adjust because there's less friction through the adjuster.Comes with Snap-In attachments at Lap and Sub points. The Shoulders come ready to be wrapped around a roll-bar. Snap or Bolt in attachments can be purchased separately. FIA 8853-2016 Approved. Available in black or red. Features: FIA Certified ZIP Adjusters in shoulder belts ensure best fit Simple and easy-to-adjust ZIP adjusters integrated into the lap belt latches Extra large, easy-to-grab hand loops on the shoulder belts Sewn-in bungee loops on the shoulder belts Two-inch (50mm) lap belts provide superior safety and comfort Patented RFR lightweight buckle Included Hardware: Six SG23 7/16" eyebolts Twelve S3 washers Two SG39 reinforcement plates
Sparco 6 Point Racing Harness (3
Sparco Sparco 6 Point Racing Harness (3" Steel) $365.00
Sparco 6 Point Racing Harness (3" Steel) Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. Our 6-point harness features 3-inch lap and shoulder straps that attach in the center using an aircraft-quality quick-release buckle with integrated anti-submarine belts. The lightweight steel adjusters allow for smooth, quick adjustments and perfect clamping. Each belt attaches to the frame using snap-on fixings. Available in pull up only. TECHNOLOGY 3" lap and shoulder straps Pull-Up lap belts Light-weight steel adjuster for smooth and quick tensioning Snap-in Kit Mounting included FIA Approved
Schroth Reinforcement Plates 7/16
Schroth Schroth Reinforcement Plates 7/16" x 20TPI $5.00
Schroth Reinforcement Plates 7/16" x 20TPI Schrtoth SG39 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor. Schroth Racing SG39 Reinforcement Plate Details: Manufacturer: Schroth Manufacturer part number: SG39 Length: 3.25" Width: 2" Welded Nut Size/Pitch: 7/16 x 20TPI Finish: Zinc Plated Material: Steel Quantity in kit: 1 Schroth 7/16" x 20TPI Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a 7/16 x 20 TPI nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to. This back-up plate is what comes standard issue with most Schroth Racing Harness kits
OMP - EYE BOLT PLATE (DB4186)
OMP OMP - EYE BOLT PLATE (DB4186) $6.50
Seat belt plate with threaded 7/16 nut ready to be welded to the chassis. Complying with FIA. MEASURES50x80x3 mm
Schroth Formula 2x2 6 Point Racing Harness
Schroth Schroth Formula 2x2 6 Point Racing Harness $499.00
The Formula 2x2: Your Go-To Belt for Formula Type Cars The Formula 2x2 features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" non-adjustable Formula lap belts, and individual non-adjustable sub straps. Individual Sub Straps Make the Formula 2x2 Different The sub straps loop through the lap belts and latch into the shoulder belts. The classic “D” ring used in previous Formula belts has been replaced with sewn-in webbing, creating a more lightweight and comfortable fit. The sub straps are typically anchored very far rearward, almost to the lap belt mounting points. See Schroth Harness Installation documents for more details. This racing harness is typically used in single-seat open-wheeled cars with very reclined seating positions. It's not recommended for use in traditional road-racing sports cars or vehicles with more upright seating positions. Comes with wrapped snap-in attachments at all six points. Bolt-in attachments can be purchased separately. The Formula 2x2 is available in Black or Red. FEATURES: FHR/HANS specific 2” shoulder belts 2” Formula non-adjustable lap belts Individual non-adjustable sub straps Rotary cam lock FIA 8853-2016 approved
Schroth Flexi 2x2 Porsche GT3-GT4 6 Point Racing Harness for Porsche oem carbon bucket seats 94700US Black
Schroth Schroth Flexi 2x2 Porsche GT3-GT4 6 Point Racing Harness $619.00
Schroth Flexi 2x2 Porsche GT3/GT4 Racing Harness 2028 EXPIRY Porsche GT3 Cup Cars come with Schroth belts direct from the factory. If you're putting harnesses in your Porsche GT3, GT3RS, or GT4 with the Lightweight Bucket (LWB) seat setup, you'll want these belts! The Flexi 2x2 GT3 features 2” shoulder belts ideal for Frontal Head Restraint (FHR or HANS) devices. It has 2" pull-down Profi lap belts with sewn-in anchors specifically made for Porsche's carbon fiber Lightweight Bucket ("LWB") seats. A T-bar adjustable sub-strap is standard, and shoulder- and sub-strap attachment hardware is wrapped in. The FHR/HANS specific shoulder belts are designed to make the driver safer and more comfortable. The full 2" shoulder webbing fits perfectly on a FHR or HANS device, creating optimal force distribution on the surface of the device. The main impetus behind the 2" lap belt is added safety. A 2" belt rides within the crest of the human pelvis, where a 3" belt would rest on the edges. This allows you to get the belt up to an inch-and-a-half tighter, so the lap belt will work earlier in an accident because it gets loaded faster. It's also more comfortable and easier to adjust as there's less friction through the adjuster. Comes with Porsche-specific attachments for the lap belts and snap-in attachments at sub-strap points. The shoulders come ready to be wrapped around a roll bar or roll cage. Bolt-in attachments can be purchased separately for shoulder- and sub-straps. Remember you will need a submount bar for your OEM carbon bucket seats which you can find right here. Available in Black, Red, Blue and Yellow. If you drive a GT3 Cup car or are driving a Porsche with a fixed-back racing seat, a standard non-Porsche harness such as the Enduro 2x2 or Flexi 2x2 would be better suited for your vehicle. FEATURES: FHR/HANS specific 2” shoulder belts. 2” Flexi pull-down lap belts with sewn-in Porsche hardware. T-bar adjustable sub-strap. Rotary cam lock. FIA 8853-2016 homologation.
OMP - EYE BOLT (DB4206)
OMP OMP - EYE BOLT (DB4206) $4.85
7/16" eye bolt to attach harness snap-hook fittings.
Schroth Enduro 2x2 Porsche GT3 6 Point Racing Harness
Schroth Schroth Enduro 2x2 Porsche GT3 6 Point Racing Harness $779.00
Schroth Porsche GT3 Enduro 2x2 6 Point Racing Harness 2028 EXPIRY FITS*   Porsche 991 GT3/GT3RS Porsche 981/718 GT4 Porsche 918   FAST DRIVER CHANGES Fitting the Porsche GT3 with Porsche's carbon bucket seats - comes in black and red with 2" shoulder and 2" waist/sub belts. The Schroth Porsche GT3 Enduro 2x2 Harness takes the best features of the best-selling Enduro belt and adds a few improvements. Save time in driver changes with the Schroth Enduro belt with "ZIP Adjusters" that allow for exceptional ease of adjustment (tightening) and release for faster and smoother driver changes. Note: This harness is designed for street cars with Porsche's factory One-Piece Carbon Bucket seats. If you are in a GT3 Cup Car or have a different fixed-back race seat, a standard Enduro will be better suited for your vehicle. Endurance racing drivers need to be able to get in and out of the car quickly and easily during a race. The Schroth Porsche GT3 Enduro 6 Point Racing Harness uses the newest, most innovative technology available to ensure ease of use during quick driver changes in the most arduous conditions. The Schroth Enduro 6 Point Racing Harness is considered the fastest, easiest harness to use among many drivers. All while maintaining the superior quality and durability for which Schroth is famous. The Schroth Porsche GT3 Enduro 2x2 Racing Harness has been tested for quality and ease of use in the WEC endurance series and in 24-hour races at legendary venues like Germany’s Nürburgring Nordschleife. The Schroth Enduro 6 Point Harness is at the top of its game, constructed for racers who need superior driver restraint technology. The new design of the ZIP Adjuster is integrated into the lap belt buckle attachments, making the position of the adjusters ideal for quick, precise tightening. This design -- featuring clearly-marked belt release straps, extra large, easy-to-see, yellow hand loops on the lap belts -- also ensures efficient, smooth releases and tightenings for quicker, easier driver changes. The Schroth Enduro 6 Point Racing Harness also has these ZIP Adjusters on the shoulder belts. MADE FOR PORSCHE Schroth ups the ante with its Porsche GT3 Enduro 2x2, with sewn-in lap belt attachments specifically for Porsche's OEM carbon bucket seats. The lap belts bolt in simply, without any drilling or other modifications for a factory-installed look. Attachment of the shoulder belts requires the use of a roll bar or harness bar, and the sub straps must be mounted to a sub strap bar beneath the seat. ENDUROS AND BEYOND The Schroth Enduro 2x2 6 Point Harness is a first choice for endurance racing teams, racing schools, and corporate ride-along venues where transitioning in and out of the race car quickly while maintaining top safety and durability is a winning combination.  The Schroth Enduro 2X2 6 point race belt is Schroth's top-of-the-line racing harness for Endurance racing. The Schroth Enduro belt features the widely praised ZIP Adjusters integrated into the lap belt buckle attachments to optimize the position of the adjusters for perfect and fast adjustment. The rotational design of the ZIP Adjusters allows for exceptional ease of adjustment (tightening) and release for faster and smoother driver changes.The Schroth Enduro 2X2 6 point harness is designed specifically for when fast driver changes are needed in endurance racing. The lap belt straps have large, easy to grab adjuster loops for the easiest adjustment. Newly designed compact aluminium rotary buckle features a quicker, more positive “click” and an ergonomic release lever.One of the main features of the Enduro 2X2 belt systems is the 2" (50mm) lap belt for added safety over 3" designs. A 2" belt rides within the crest of the human pelvis where a 3" belt would rest on the edges. This allows you to get the belt up to an inch and a half tighter. That means the lap belt will be working earlier in an accident because it gets loaded faster. It's also more comfortable and easier to adjust because there's less friction through the adjuster.Schroth Porsche GT3 Enduro 2x2 Harness Shoulder Belts:This is the first thing a Profi II racer is going to notice - the shoulder belts. Instead of going from 2" from the adjuster up and 3" from the adjuster down, the Enduro 2x2 has a full length 2" width shoulder belt. At first, being a racer who does not like change, I wanted my same 3/2" shoulder belt. Upon sitting in a race seat and mounting the harness, Schroth actually improved on something I though did not need improvement. They are easy to lay up on my Hans device, are a little lighter, and the new small adjusters are nice. Actually, really nice. I like the new lightweight adjusters better than my Profi II. This is a nice upgrade I did not know needed upgrading. The shoulder belt camlock ends are still keyed (angled) for individual left and right to keep driver comfort at a maximum, no matter how large or small the driver is. We love this feature on all Schroth belts.Schroth Porsche GT3 Enduro 2x2 Harness Waist Belts:At first look, you appreciate the technology that Schroth puts into their ZIP adjusters that are part of the slip-in end of the waist belt. Spring loaded, but easy to release. German perfection is found in the Schroth Enduro series harness sets.Schroth Porsche GT3 Enduro 2x2 Harness Waist Belt Chassis Fittings:Featuring a precise sewn-in waist belt to chassis fitting, the Schroth Porsche waist belt fits perfect. Everything is in the perfect position and legal for all competition you may see, even the 24 Hours of LeMans. We sew the Schroth B43A end on both of the waist belts so installation is like your super car came out of Stuttgart.  Schroth Porsche GT3 Enduro 2x2 Harness Waist Belts 2" vs 3":All Schroth Enduro Belts are 2" (50mm) wide and are more effective that the 3" (75mm) waist belt. Why is 2" webbing more effective than 3" webbing? Let's start looking at the shape of our human body. The Iliac Crest (IC) is the part of the pelvic bone that sticks out above the hips. 2" webbing fits entirely within the recession created by the Iliac Crest where 3" webbing rides over the top of the Iliac Crest. Because of this, the 3" webbing has less contact area by percentage than the 2" webbing which will cause more bruising during an impact where the belt is making contact with the pelvic bone. Since the 2" webbing rides inside the Iliac Crest, it can be worn as much as 1" to 1.5" tighter and at the same time is more comfortable for the driver.Since the 2" webbing fits well within the Iliac Crest of the pelvis, it is less likely to slide up above the crest and cause submarining, a condition where the body slides down below the lap belt possibly causing internal organ damage.Research shows that the faster the pelvis is captured, the lower the resultant loads on the chest, head, and neck. There is no difference in the strength of the 2" webbing vs the 3" webbing. All webbing - 2" or 3" - must meet the same FIA homolgation test loads.There is an additional benefit of the 2" lap belts. The required force to properly and tightly adjust the belts in the car is much easier than with 3" belts. We here at DiscoveryParts love and prefer the Schroth 2" waist belt system. Schroth Porsche GT3 Enduro 2x2 Harness Camlock:Different or the same? The buckle looks like our old reliable Schroth Profi cam lock in non-glare matte black, and looks and feels the same externally. The only upgrade is a different amount of force required to turn the buckle. It is solidly positioned and has a very sharp snap when releasing. Nothing too drastic, if you start turning the camlock (in either direction) it just is tight, tight, tight, and boom - released. Actually there is no boom, it just releases cleanly.Schroth Porsche GT3 Enduro 2x2 Harness Sub Belt:Safety is #1 with Schroth and comfort is elevated beyond any other harness competitor. Going back to safety, the buckle position is not just important, but paramount. For the loading of the belts to be properly spread over your pelvis, Iliac crest, and upper torso, we need the buckle to be positioned correctly on the driver. To help position the belt easily the first time and quickly fine-tune the position for a multiple driver car, Schroth added two adjusters for you. Sub-belt install time of a Schroth harness is 70% less than competitor harness sets. Available in Black or Red See Schroth's Harness Installation Checklist Here FEATURES FIA 8853-2016 Homologated Specific lap belt attachments for Porsche OEM carbon bucket seats ZIP Adjusters in lap and shoulder belts ensure quick, easy fit Extra large, easy-to-grab hand loops on the shoulder belts Sewn-in bungee loops on the shoulder belts Two-inch (50mm) lap belts provide superior safety and comfort Patented RFR lightweight buckle INCLUDED HARDWARE (6) SG23 7/16" Eyebolts (2) SG39 7/16" Backing Plates (12) S3 7/16" Lock Washers * Lap belt attachments are designed for Porsche OEM carbon bucket seats only
Schroth Harness Grips
Schroth Schroth Harness Grips $15.95
Schroth Harness Grips Schroth's street legal harnesses have loops sewn into the end of each adjusting strap. These are plastic dowels that can be put through those loops to give something firm to grab on to when adjusting the belts. This really gives you an advantage when the temperatures are high, or when you're wearing gloves. It makes it much easier to get the belts as tight as you should be wearing them. Sold in sets of four which is enough for one street legal harness [img-15499-left-large_default] Schroth Harness Grips Details: Manufacturer: Schroth Manufacturer part number:00092 Material: Plastic
OMP ONE 2
OMP OMP ONE 2" Versa 6 Point Racing Harness $479.00
OMP ONE 2" Versa 6 Point Racing Harness The Super-Light ONE Versa 6 point camlock harness from OMP is designed specifically for sedan drivers using a HANS device. Special lightweight adjusters and compact lap belt mounting hardware are used to keep weight to a minimum. Even the buckle tabs have been lightened. This Versa model is ideal for endurance racing. The shoulder belts are 2" wide along the entire length for better alignment with a HANS device. Each shoulder strap has loops just above the adjusters for attaching radio cables, drink tubes, or rubber bands. The lap belts are 2" wide, and you get both a lap belt set with pull-up adjusters and a lap belt set with pull-down adjusters to suit all installations. The 2" sub straps also have pull-up adjusters for quick driver changes. The rotary camlock buckle is permanently attached to the sub belts by a rounded T-bar. No more sitting on the buckle when you get in the car! Hook-and-loop fasteners on the lap and shoulder belts can also be used to keep the belts out of the way during driver changes. A special detent prevents accidental buckle release. The shoulder belts include 3-bar sliders for wrap-around mounting. The lap belts have lightweight carabiners sewn in for use with eyebolts (included). The anti-sub belts have snap-in end plates installed with 3-bar sliders for easy conversion to wrap-around mount. Includes 4 forged eyebolts with 7/16-20 UNF threads. Available in Black or Red