991.2 GT2 RS - GT3 RS Front NACA Ducts
C3 Carbon 991.2 GT2 RS - GT3 RS Front NACA Ducts from $1,549.99
C3 Carbon Porsche GT2 RS / GT3 RS Front Brake NACA Ducts FITS: 991.2 Porsche GT2 RS and GT3 RS C3 Carbon offers this GT2 RS / GT3 RS 100% carbon fiber front NACA brake duct kit, giving you the uncompromising look, fitment, and finish to match your Porsche's factory carbon perfectly. You get replacements for the two NACA ducts on the exterior (top) of your front trunk bonnet and two replacements for the interior ducts on the bottom side. The NACA ducts match the 2x2 carbon weave on your Porsche's factory carbon, finished with either a high-gloss or smooth satin automotive urethane top coat. The interior ducts are matched to the weave and matte finish of the bonnet's underside. All four pieces are pure dry carbon fiber, no overlays. INCLUDES: Two NACA ducts (top side of bonnet) Two interior ducts (bottom side of bonnet) 3M VHB double-sided trim adhesive FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon Clear-coated with durable automotive urethane OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
Sold out
C3 Carbon Porsche 991.2 GT2 RS Wing End Plates
C3 Carbon C3 Carbon Porsche 991.2 GT2 RS Wing End Plates $1,649.99
C3 Carbon Porsche GT2 RS Wing End Plates FITS: 991.2 Porsche GT2 RS C3 Carbon GT2 RS 100% carbon fiber rear-wing end plates offer the uncompromising look, fitment, and finish to match the GT2 RS carbon rear wing perfectly. C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. The look and finish are simply glorious. These really are the pieces Porsche should have put on the GT2 RS in the first place. The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. Available in high-gloss or matte/satin clear automotive urethane top coat, or satin black top coat. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Available in gloss or matte/satin clear, or satin black top coat OEM-perfect fit Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Porsche GT2 RS Style Wing End Plates for GT3 RS
C3 Carbon C3 Carbon Porsche GT2 RS Style Wing End Plates for GT3 RS $1,649.99
GT2 RS Style Wing End Plates for the GT3 RS FITS: 991.1 & 991.2 Porsche GT3 RS C3 Carbon has created a GT2-Style, 100% dry carbon fiber rear-wing end plates that bolt directly to the factory GT3 RS wing! The OEM GT2 RS end plates use a completely different attachment system (adhesive) than the OEM GT3 RS end plates (bolt-on). But we love the look of the GT2 RS wing ends. So we married the two, giving our customers the look of the GT2 RS on their GT3 RS! The C3 Carbon end plates precisely match the uncompromising look, fitment, and finish of the factory Porsche carbon rear wing. They attach in exactly the same way as the OEM GT3RS end plates; no drilling, modifying, etc. required. Just bolt them up and go. C3 starts with 3D laser scanning to make an ultra-precise, CNC-machined aluminum billet mould for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. The look and finish are truly amazing! The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. Available in either high-gloss or matte/satin automotive urethane clear coat, or satin black automotive coating. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Gloss clear, satin clear, or satin black finish available OEM-perfect fit Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
Sold out
C3 Carbon Porsche GT3 RS Carbon Fiber Rear Wing End Plates
C3 Carbon C3 Carbon Porsche GT3 RS Carbon Fiber Rear Wing End Plates $1,649.99
Carbon Fiber Wing End Plates For Porsche GT3 RS FITS: 991.1 and 991.2 Porsche GT3 RS C3 Carbon 100% carbon fiber rear-wing end plates with the look, fitment, and finish that matches your GT3 RS carbon rear wing perfectly. C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. There's no modification, drilling, etc. needed -- the C3 Carbon parts are ready to bolt on. The look, however, is pure carbon fiber! These really are the pieces Porsche should have put on the GT3 RS in the first place. The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. The high-gloss automotive urethane top coat is hand-applied and polished to a smooth mirror finish. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Easy bolt-on, no modifications required Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 488 GTB Carbon Fiber Firewall Panel
C3 Carbon C3 Carbon Ferrari 488 GTB Carbon Fiber Firewall Panel $799.99
C3 Carbon Ferrari 488 GTB Carbon Fiber Firewall Panel FITS: 2016+ Ferrari F488 GTB Coupe only Stunning carbon fiber panel to add a bit of flair to your 488 GTB engine bay. This piece installs against the firewall under the glass backlight, replacing the stock flat-black plastic trim. C3 Carbon uses ultra-precise CNC-machined billet moulds to create this incredible pre-preg dry carbon fiber replacement with quality, fit, and finish equaling expensive factory Ferrari carbon pieces. C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship at a reasonable price. Installation is simple. This piece can be paired with C3 Carbon engine surrounds in the Engine Bay Carbon Kit for a stunning upgrade of your car's engine bay. FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
Sold out
C3 Carbon Ferrari F12 Carbon Fiber Complete Engine Bay
C3 Carbon C3 Carbon Ferrari F12 Carbon Fiber Complete Engine Bay $4,399.99
C3 Carbon Ferrari F12 Carbon Fiber Complete Engine Bay FITS: Ferrari F12 Berlinetta models When you open the hood of your F12, you see the spectacular 6.2L Ferrari V12 surrounded by...dull black plastic trim. Replace that OEM trim with incredible carbon fiber panels made by C3 Carbon. Formed in the autoclave from pre-impregnated (pre-preg) dry carbon fiber, hand-laid in the factory-original 1x1 3K plain weave, C3 insists on fit and finish as perfect as the factory carbon pieces. C3 brings the luxury of carbon fiber to your F12 engine bay at a fraction of the cost of factory carbon. Easy installation makes these works of art a must-have for the discerning F12 Berlinetta owner. ENGINE BAY INCLUDES: Left and right side panels Engine cover Left and right insulated intake covers FEATURES: Autoclaved pre-preg dry 3k carbon fiber with 1x1 weave matched to Ferrari OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Install in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
Sold out
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Complete Engine Bay
C3 Carbon C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Complete Engine Bay $3,299.99
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Complete Engine Bay FITS: Lamborghini Huracan (2014+) Spectacular carbon fiber replacements for the black plastic engine bay on the Lamborghini Huracan LP610. The quality, beauty, fit, and finish of C3 Carbon for your Lamborghini is unsurpassed. Unlike many competitors, C3 Carbon autoclaves pre-impregnated (pre-preg) dry carbon fiber -- not carbon over fiberglass -- bringing you true factory-level pieces at an affordable price. C3 matches the original Lamborghini 2x2, 3K twill carbon weave perfectly for a uniquely Lamborghini appearance. The C3 carbon fiber engine bay is the perfect upgrade to show off the Huracan's one-of-a-kind engine room. Complete Engine Bay includes part numbers C3-LAMB-HUR092, 093, and 094, saving you over 10%! FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
Sold out
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Engine Bay Front Cover
C3 Carbon C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Engine Bay Front Cover $325.00
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Engine Bay Front Cover FITS: Lamborghini Huracan (2014+) Stunning carbon fiber replacement for the black plastic engine bay front trim on the Lamborghini Huracan LP610. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber engine bay trim installs simply with no modification, bringing you astonishing factory-quality fit and finish at an affordable price. C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. Spectacular appearance and quality make this carbon fiber panel the perfect accent to the Huracan's engine room. FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
Sold out
C3 Carbon Ferrari F12 Carbon Fiber Rear Fog Light Cover
C3 Carbon C3 Carbon Ferrari F12 Carbon Fiber Rear Fog Light Cover $549.99
C3 Carbon Ferrari F12 Carbon Fiber Rear Fog Light Cover Beautiful carbon fiber rear fog lamp cover for your Ferrari F12 Berlinetta. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber process produces a fog lamp cover that installs easily and fits perfectly, a dazzling addition to the back of your F12! C3 has matched the OEM Ferrari 3K 1x1 weave for a perfect original Ferrari appearance. Easy installation makes this a must-have for any F12 owner. Especially complementary to the C3 Carbon Fiber Rear Diffuser for the Ferrari F12. All 2013+ Ferrari F12 models FEATURES: Autoclaved pre-preg dry 3k carbon fiber with 1x1 weave matched to Ferrari OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
Sold out
C3 Carbon Ferrari F12 Carbon Fiber Engine Bay Panels
C3 Carbon C3 Carbon Ferrari F12 Carbon Fiber Engine Bay Panels $2,749.99
C3 Carbon Ferrari F12 Carbon Fiber Engine Bay Panels When you open the hood of your F12, you see a beautiful 6.2L Ferrari V12 surrounded by dull-black plastic trim. Replace that trim with C3's autoclaved, pre-impregnated (pre-preg) dry 3k carbon fiber engine bay trim. Fit and finish are as perfect as the factory carbon pieces, bringsing the beauty of carbon fiber to your engine bay. C3 has matched the OEM Ferrari 1x1 weave for an original Ferrari appearance. Easy installation makes this a must-have for any F12 Berlinetta owner. Fits 2013-2014 Ferrari F12 Berlinetta models FEATURES: Autoclaved pre-preg dry 3k carbon fiber with 1x1 weave matched to Ferrari OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 488 GTB-Spider Carbon Fiber Side Skirts
C3 Carbon C3 Carbon Ferrari 488 GTB-Spider Carbon Fiber Side Skirts $2,749.99
C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Side Skirts Aerodynamic race-inspired side skirts combine functional high performance with the incredible beauty of pure carbon fiber, bringing out the motorsports heritage of your 488 GTB or Spider. C3 Carbon uses ultra-precise CNC-machined billet tooling to create unrivaled pre-preg dry carbon fiber replacements with quality, fit, and finish equal to expensive factory Ferrari carbon pieces. C3 produces only 100% carbon fiber pieces, not fiberglass or plastic overlays. C3 matches the traditional 3K 1x1 plain weave used by Ferrari, sealed with a mirror-finish automotive urethane. The result is factory-original quality, craftsmanship, and appearance at a reasonable price. Straightforward installation makes this a favorite of our Ferrari 488 clientele. FITS: 2016+ Ferrari 488 GTB Coupe and 488 Spider FEATURES: Autoclaved pre-preg dry carbon fiber 3K, 1x1 plain carbon weave Clear-coated with automotive urethane, then hand-polished to a mirror finish Installs without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Surrounds
C3 Carbon C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Surrounds $2,749.99
C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Surrounds Stunning carbon fiber engine cover panels are an excellent upgrade for your 488 GTB! Ferrari displays the gorgeous 488 GTB V8 engine under a glass bonnet, but the stock flat-black plastic engine covers are a significant let down. C3 Carbon uses ultra-precise CNC-machined billet moulds to create incredible pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish equaling the incredibly expensive factory Ferrari carbon pieces! C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship, but at a reasonable price. Straightforward installation makes this a favorite our 488 GTB customers. For the complete carbon treatment for your whole 488 GTB engine room, see our Complete 488 Engine Kit. FITS: 2016+ Ferrari F488 GTB Coupe (for Spider, click here). FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 488 GTB Carbon Fiber Complete Engine Kit
C3 Carbon C3 Carbon Ferrari 488 GTB Carbon Fiber Complete Engine Kit $4,399.99
C3 Carbon Ferrari 488 GTB Carbon Fiber Complete Engine Kit Nothing makes the beautiful 488 engine stand out like a complete engine room in stunning carbon fiber from C3! Your Ferrari displays its gorgeous 488 GTB V8 engine under a glass bonnet, but the stock flat-black plastic engine trim is a bit of a let down. C3 Carbon uses ultra-precise CNC-machined billet moulds to create incredible pre-impregnated (pre-preg) dry carbon fiber replacement pieces with quality, fit, and finish equaling the OEM factory Ferrari carbon pieces. The OEM pieces cost a fortune, though. Finally, you can bring your 488 GTB engine room up to standard with C3 Carbon at a reasonable price! C3 meticulously matches the factory Ferrari 1x1 3K plain weave, perfectly re-creating factory-original appearance and craftsmanship at a reasonable price. Straightforward installation makes this a very popular upgrade for our 488 GTB customers. FITS: 2016+ Ferrari F488 GTB Coupe (for the Spider, click here). KIT INCLUDES: Engine Bay Side Trim Panels (2) Engine Bay Firewal Trim Panel Airbox Cover Oil Cap/Bonnet Latch Cover FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Bay
C3 Carbon C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Bay $2,749.99
C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Bay Stunning carbon fiber engine bay trim panels are a spectacular upgrade for your 488 GTB! Ferrari displays the gorgeous 488 GTB V8 engine under a glass bonnet, but the stock flat-black plastic engine trim is a significant let down. C3 Carbon uses ultra-precise CNC-machined billet moulds to create incredible pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish equaling the incredibly expensive factory Ferrari carbon pieces. Bring your 488 GTB engine room up to standard with C3 Carbon! C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship, but at a reasonable price. Straightforward installation makes this a very popular upgrade for our 488 GTB customers. FITS: 2016+ Ferrari F488 GTB Coupe (not Spider) FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
Sold out
C3 Carbon Ferrari F12 Carbon Fiber Side Skirt Covers
C3 Carbon C3 Carbon Ferrari F12 Carbon Fiber Side Skirt Covers $549.99
C3 Carbon Ferrari F12 Carbon Fiber Side Skirt Covers Add a flash of drama to your F12 with autoclaved, pre-impregnated (pre-preg) dry carbon fiber side skirt covers from C3 Carbon. C3 matches the factory 1x1 3K plain weave for an original Ferrari appearance; meticulously hand-laid, C3 Carbon gives you the luxurious look of carbon at a fraction of the Ferrari price. The C3 carbon side skirt covers install easily and dramatically upgrade the look of your F12 Berlinetta! FITS: Ferrari F12 Berlinetta FEATURES: Autoclaved pre-preg 100% dry carbon fiber with 1x1 3K plain weave matched to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.