Garmin Catalyst™ Driving Performance Optimizer
Garmin Garmin Catalyst™ Driving Performance Optimizer $999.99
Garmin Catalyst Driving Performance Optimizer DISCOVER YOUR FULL TRACK DRIVING POTENTIAL This device is an industry-first, providing virtual coaching in real time and showing a calculated optimal lap. Real time coaching tells you how to go faster in each corner, with audio instructions, so you can keep your eyes up at all times. This is a stark contrast to existing systems which only provide feedback after a corner or after your session. The Catalyst uses your measured optimal lap to guide you to your personal maximum performance, rather than the performance of a professional racing driver.  OverviewGarmin Catalyst uses accelerometers, GPS, video, and the most sophisticated algorithms to evaluate your driving performance and then suggest ways to improve (just like a human coach). Through the display and audio, Catalyst provides a real-time assessment of performance using both gentle suggestions and positive reinforcement. No, it won't clap when you get it right but it does use real-world phrases and encouragement - such as "brake less", "apex later", or "keep pushing". Catalyst is perpetually evaluating and assessing your performance so it can optimize your lap and get you in line. After your session, review track maps showing opportunities for improvement as well as "heat map" displays of deceleration, acceleration, apexes, and speeds.Display & AudioCatalyst uses a 6.95" super wide view LCD IPS screen with vivid TFT colors. The LCD is a touchscreen, able to control functions without the need for a remote control, app, or a laptop. Coaching or playback audio is available via 3.5mm headphone jack or Bluetooth(TM) to your headset or car stereo. The on-screen layout is not programmable.CameraThis is more than just a camera - the remote pod includes the accelerometers. It records up to 30fps in 1080p HD in a 140° field-of-view. It must be mounted facing forward, high up, and centered on your windshield. An on-screen guide will help you align it. The camera contains the accelerometers and very powerful processing software integrates the video into Catalyst's coaching and data. Playback is available on the Catalyst screen with speed and lap times already in sync.CoachingTo unlock all of the coaching features and data you will need to select the Advanced setting. There is also a Basic setting that does not provide as much feedback. During your session, the real-time display is referencing current session data only. However, post-session review can include data from multiple sessions. Catalyst is looking for patterns in your driving to map out where you were fast and opportunities to try a different line, brake less, or carry more speed. The only voice currently available is a Siri-like female voice. Lap time differential is displayed as either red (slower), green (faster), or black (no change). From a student/novice perspective you may want to have an advanced driver/instructor set baselines in your car first. Then overlay that data with your own driving. This way Catalyst can see the full potential and make recommendations. It's important not to "chase" a lap time but to know what is capable and make incremental improvements to get there. Catalyst will never make a recommendation that hasn't been previously successful.Analysis & ReviewCatalyst compiles all of its data to form a True Optimal Lap. This is your best possible lap using all of the data you provided in your sessions. True Optimal Lap is determined not just by lap and sector times but by analyzing your best lines through corners and sectors and using the camera feed to identify track limits. Catalyst retains your track data over a 4-day period so you can pack in a full weekend of driving with progressive coaching and analysis. Post-session data is reviewed through the screen or through the Garmin Connect(TM) smartphone app, including video. Export of data or video files to a laptop is not currently supported nor is it needed. Everything you need is self-contained in the tablet. Catalyst works best when used as a standalone tool to review performance and make adjustments while at the track. IN THE BOX: Garmin Catalyst 32GB microSD pre-installed under covered compartment (auxiliary card slot on the side of the Catalyst device is externally accessible for memory expansion) Remote Cam with polarized lens cover Remote Cam 3.5 meter cable Heavy-duty vehicle suction cup Powered magnetic mount Two 1” connecting arms 1” arm connector Cable clips Socket power cable Documentation INCLUDED ACCESSORIES: One-inch ball adapter screw down mount USB data cable 12V bare wire vehicle power cable Additional Remote Cam adhesive Continue reading to see how and why the Garmin Catalyst Driving Performance Optimizer is unlike anything you've ever experienced. Heck... it's unlike anything you've ever even thought possible!
AiM PDM CAN KeyPad Button Inserts
AiM Sports AiM PDM CAN KeyPad Button Inserts $3.00
AiM PDM CAN Keypad Inserts The AiM keypad inserts allow you to label & use your AiM CAN Keypad. These are a required add-on to operate each button, and are sold individually. AiM PDM CAN Keypad Inserts Details: Manufacturer: AiM Sports Manufacturer part number: BUTTON Quantity: 1 Each button function and backlight is programmed using AiM software and can be set up as momentary, toggle, or multi-position. Once programmed install the button insert for each button. Rear connector is a motorsport-grade Deutsch 6-pin connector wired for power, ground, CAN high, CAN low, TxRx-, and TxRx+.
AiM Sports Solo 2 DL Data Logging Lap Timer
AiM Sports AiM Sports Solo 2 DL Data Logging Lap Timer $799.00
AiM Sports Solo 2 DL Data Logging Lap Timer THE BRAND NEW DATA-LOGGING GPS LAP TIMER FOR MOTORSPORTS The new Solo 2 DL receives data from two satellite constellations, GPS and Glonass; this is a huge step forward since it is unbelievably faster and more precise than the previous version. Power-on requires only a few seconds and lap times are calculated with a max 2/100 sec. of tolerance thanks to 10Hz GPS sampling. A sleek newly-designed case with easier-to-use metal buttons add a premium look and feel to the world's most popular data-logger and GPS lap timer. The screen can be back-lighted in one of the seven colors: ECU CONNECTION Solo 2 DL -- the Solo with an ECU connection -- has over a thousand ECU protocols in its database. Easily connect your Solo 2 DL to your ECU and get reams information with just one cable. In case your ECU protocol isn't in the database, no problem: an ECU Driver Builder is available in the included Race Studio 3 software, allowing you to create your protocol yourself. This gives you access to a huge amount of data from your car that can be overlaid with GPS data to create an incredibly powerful analysis and learning tool! Choose your ECU cable: OBD2: the standard vehicle diagnostic port beneath your dash supplies the Solo 2 DL with a wealth of information. This is the standard cable most people will use. CAN/RS232: the Solo 2 DL can be connected to your CAN Bus for an even richer, broader spectrum of information than OBD2. This cable can require a bit more know-how to connect, however. Coil RPM: the Solo 2 DL now features a digital input allowing to log RPM either from square wave signals (8-50 V each signal) or pulse signals (150-450 V ignition coil trigger – primary circuit).  FIND YOUR TRACK QUICKLY Solo 2 DL has access to a database of more than 3,000 tracks all over the world! As soon as it switches on, the Solo 2 DL identifies its position, recognizes the starting line coordinates of the track, and is ready to start sampling lap times. If your track isn't in the database, no problem: the Solo 2 DL will automatically enter into autolearning mode, figures out the characteristics of the track, and starts lap-timing anyway. PREDICTIVE LAP TIME LEDS The new Solo 2 DL's predictive lap time engine is now even more reliable. And with configurable RGB LEDs, it will give you a clear, fast indication of how your current lap compares with your best possible lap. That's functionality you typically find only on expensive driver-coaching electronic aids; now it's at your fingertips with the Solo 2 DL! RACE MODE SELECTION Solo 2 DL can manage different types of races: Speed races in a closed circuit Point to-point races Regularity Performance tests (0-100 km/h etc.) In each of these configurations, Solo 2 DL gives the relevant information during the race/test along with powerful data review immediately after each session. WiFi & iPHONE CONNECTION WiFi communication with your laptop is easy, fast, and with no connectors or cables. It's the best way to configure your Solo 2 DL, manage the track database, and download lap data to your PC. Connect your Solo 2 DL to your iPhone for quick and easy data analysis, managing your track database, etc. SMARTYCAM INTEGRATION The perfect connection: the Solo 2 DL takes all the data from your ECU, merges it with GPS lap information, and transmits everything seamlessly to a SmartyCam HD or SmartyCam GP HD . The resulting video includes your ECU and lap data in a graphical overlay! Feel free to give us a call at (844) 438-7244 to discuss the cool new features and capabilities of AiM's latest, greatest compact datalogger/lap timer today!
AiM Sports MXS 1.2 Compact Color TFT Dash And Data Logger
AiM Sports AiM Sports MXS 1.2 Compact Color TFT Dash And Data Logger from $2,599.00
AiM MXS 1.2 Color TFT 5" Dash And Data Logger Check Out The MX Series User Manual Here The MXS 1.2, the evolution of MXS, is a beautifully executed compact dash/data logger designed to put data at your fingertips. It can acquire data from your ECU, its internal accelerometer and gyro, the included GPS08 Module, analog/digital inputs and pre-defined math channels. The incredibly sharp, full-color TFT display puts it all front-and-center, in incredible color with a high contrast ratio. It even automatically adjusts its backlight based on ambient light to optimize visibility. Freely configurable pages let you define all the custom pages you wish, choosing from a wide library of page styles and defining which data to display, their end of scale and units of measure. Swapping between pages is as easy as pushing a button! GPS08 Thanks to the included GPS08 Module and AiM's Race Studio 3 software, you can immediately get lap times along with all data needed for engine tuning, shaking down car and driver, and for improving and refining driving technique. A MULTITUDE OF DISPLAYS The MXS 1.2 displays your RPM scale plus all the data you need (speed, water temp, oil pressure, lap times and much more) in pre-configured pages.  Or you can customize pages as you wish, choosing from a wide library of page styles and defining which data to be shown, their end of scale and measure units. Swapping between pages is quite easy using push buttons. A 4GB non-volatile memory stores hours of information for detailed analysis using AiM's Race Studio 3 software. All data can be downloaded to your computer using a built-in secure Wi-Fi connection (no cable required). LOTS OF INPUT/OUTPUT FLEXIBILITY Eight fully configurable analog input channels can sample, log, and display a wide range of temperatures, pressures, and potentiometers (throttle position, steering wheel position, etc). CAN Inputs allow you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (Part No. MC-329, sold separately). These hubs let you connect other inputs such as Lambda Controller (O2), SmartyCam, or even channel expansion hubs, without using any analog channels. A separate CAN Output allows you to send messages to the existing CAN network, adding to the vehicle system control possibilities! The MXS 1.2 can also be connected to many different ECUs to log data gathered by each ECU. An internal three-axis accelerometer, gyroscope, and magnetometer; GPS08 input; four wheel-speed channels; lap time receiver input; and two digital outputs add up to a flexible, expandable data logger that can grow with you. It even has a screw-in port to add analog cameras used for back-up or rear view in visibility-challenged race cars! SHIFT LIGHTS & ALARMS Flexible alarms on the MXS 1.2 include six configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. The integrated shift light array features a host of advanced multicoloured RGB shift light patterns that can be customized as you like, including RPM max for each individual gear. DIGITAL OUTPUTS The MXS 1.2 features two digital outputs (low-side type, switch to ground) that can be configured to activate/deactivate external systems (switch on/off additional lights, cooling fan relays, fluid circulation pumps, etc.) based on those inputs. WiFi CONNECTIVITY A secure 802.11 WiFi connection makes it even more convenient to configure, calibrate, and download your data wirelessly! No need to move your PC close to the vehicle anymore, you can do it from your trailer or tow vehicle up to 60 yards away. TECHNICAL SPECS: Compact 6.7" x 3.8" x 0.9" anodized aluminum housing 5" TFT high-contrast color display Internal 4GB memory Screen resolution 800x480 pixels Two Motorsport connectors and one Binder connector Weight 1.2 lb. (530g) Waterproof IP65 KIT INCLUDES: MXS 1.2 Unit GPS08 Module with cable USB cable 37-pin standard Deutsch-connector harness Software installation CD with Race Studio 3 software. All other sensors and modules sold separately.
AiM Power Distribution Module PDM32 Kit w/ 10
AiM Sports AiM Power Distribution Module PDM32 Kit w/ 10" Display - Road Icons $2,800.00
AiM Power Distribution Module PDM32 Kit w/ 10" Display - Road Icons The AiM PDM32 Power Distribution Module is designed to distribute power to multiple circuits on your vehicle, replacing traditional fuse & relay systems. AiM Power Distribution Module PDM32 Kit w/ 10" Display - Road Icons Details: Manufacturer: AiM Sports Manufacturer Part Number: XC1PDM32D10-C2 Includes 10" Display w/ Road Icons: Yes Includes Choice of GPS Module: Yes 28 high side outputs 4 Half Bridge Outputs Replaces traditional fuse & relay systems Alternate ID: MC-510 AiM PDMs are housed in an anodized billet aluminum case are designed specifically for the rigors of motorsport, and include a complete professional data logger & internal dash controller. Using an AiM PDM at the center of vehicle electronics greatly simplifies your wiring harness and electronics installation while providing much more control. AiM's PDM32 also offers some interesting features that you wouldn't necessarily expect to see in a traditional distribution module, such as: ECU connection for logging data, eliminating the need to add another data logging unit to your car GPS module compatibility for lap timing (GPS module sold separately) Dash controller for managing the 6" or 10" PDM dash displays (displays available separately) 9-axis EMU platform Mirror camera control for adding a reverse camera to the PDM dash display (camera & display available separately) The PDM32 offers 4 different power output levels: 4 rated up to 20 A (high power) 12 rated up to 15 A (mid power) 12 rated up to 10 A (low power) 4 rated up to 35 A (Half Bridge) Protected for over voltage, under voltage, over current, & over temperature Total max current: 120 A Each output provides status feedback for open circuit, short circuit, high temperature, over current, under voltage, & over voltage. Inrush current, number of fault retries, & time between retries are all definable. All the outputs may be configurable as PWM and allow soft start/stop. For every output, a multicolor LED shows the status: Enabled/disabled Activated or not Fault An elegant visual interface allows flexible and powerful configuration for every power output. Some "black boxes" are available for simplifying the configuration. For example, the Wiper may be managed by the LIN connection or using the Half Bridges.   The AiM PDM32 features the following input channels: Analog/Digital: 8 Only Digital: 4 Speed: 2 If configured as Analog inputs, it is possible to activate an internal 2K Ohm resistor for connecting most of the sensors directly. If configured as Digital inputs, it is possible to activate a 10K Ohm Pull Up or a 10K Ohm Pull Down. The PDM32 supports the new 6" & 10" TFT displays, fully configurable with Race Studio 3. It also features two analog camera inputs that allow you to swap your display into a mirror camera with the press of a button or through configurable event logic- reverse gear being the most common option. The PDM32 receives, uses, & records data from: ECU- more than 1,000 protocols available Digital/Analog inputs Internal 9-axis EMU GPS- position & lap time Expansions Push buttons, from RIO02 module or from any commercial CAN keypad, than to simple configurability of CAN protocols All the currents & status of all the power outputs Other user-defined math channels AiM PDMs come with 4,000 tracks in their database and automatically select the one you are driving on, in order to calculate Lap Time when you pass the start/finish line. An internal datalogger is available, capable of recording all the analog inputs, digital inputs, ECU channels, GPS values, currents, & status of all the power outputs. 
AiM Power Distribution Module PDM32 Kit w/ 6
AiM Sports AiM Power Distribution Module PDM32 Kit w/ 6" Display - Road Icons $2,500.00
AiM Power Distribution Module PDM32 Kit w/ 6" Display - Road Icons The AiM PDM32 Power Distribution Module is designed to distribute power to multiple circuits on your vehicle, replacing traditional fuse & relay systems. AiM Power Distribution Module PDM32 Kit w/ 6" Display - Road Icons Details: Manufacturer: AiM Sports Manufacturer Part Number: XC1PDM32D06-C2 Includes 6" Display w/ Road Icons: Yes Includes Choice of GPS Module: Yes 28 high side outputs 4 Half Bridge Outputs Replaces traditional fuse & relay systems AiM PDMs are housed in an anodized billet aluminum case are designed specifically for the rigors of motorsport, and include a complete professional data logger & internal dash controller. Using an AiM PDM at the center of vehicle electronics greatly simplifies your wiring harness and electronics installation while providing much more control. AiM's PDM32 also offers some interesting features that you wouldn't necessarily expect to see in a traditional distribution module, such as: ECU connection for logging data, eliminating the need to add another data logging unit to your car GPS module compatibility for lap timing (GPS module sold separately) Dash controller for managing the 6" or 10" PDM dash displays (displays available separately) 9-axis EMU platform Mirror camera control for adding a reverse camera to the PDM dash display (camera & display available separately) The PDM32 offers 4 different power output levels: 4 rated up to 20 A (high power) 12 rated up to 15 A (mid power) 12 rated up to 10 A (low power) 4 rated up to 35 A (Half Bridge) Protected for over voltage, under voltage, over current, & over temperature Total max current: 120 A Each output provides status feedback for open circuit, short circuit, high temperature, over current, under voltage, & over voltage. Inrush current, number of fault retries, & time between retries are all definable. All the outputs may be configurable as PWM and allow soft start/stop. For every output, a multicolor LED shows the status: Enabled/disabled Activated or not Fault An elegant visual interface allows flexible and powerful configuration for every power output. Some "black boxes" are available for simplifying the configuration. For example, the Wiper may be managed by the LIN connection or using the Half Bridges. The AiM PDM32 features the following input channels: Analog/Digital: 8 Only Digital: 4 Speed: 2 If configured as Analog inputs, it is possible to activate an internal 2K Ohm resistor for connecting most of the sensors directly. If configured as Digital inputs, it is possible to activate a 10K Ohm Pull Up or a 10K Ohm Pull Down. The PDM32 supports the new 6" & 10" TFT displays, fully configurable with Race Studio 3. It also features two analog camera inputs that allow you to swap your display into a mirror camera with the press of a button or through configurable event logic- reverse gear being the most common option. The PDM32 receives, uses, & records data from: ECU- more than 1,000 protocols available Digital/Analog inputs Internal 9-axis EMU GPS- position & lap time Expansions Push buttons, from RIO02 module or from any commercial CAN keypad, than to simple configurability of CAN protocols All the currents & status of all the power outputs Other user-defined math channels AiM PDMs come with 4,000 tracks in their database and automatically select the one you are driving on, in order to calculate Lap Time when you pass the start/finish line. An internal datalogger is available, capable of recording all the analog inputs, digital inputs, ECU channels, GPS values, currents, & status of all the power outputs. 
Aim MX2E Plug & Play Dash Logger Kit For Lotus Elise / Exige
AiM Sports Aim MX2E Plug & Play Dash Logger Kit For Lotus Elise / Exige $2,000.00
Aim MX2E Plug & Play Dash Logger Kit For Lotus Elise / Exige Aim MX2E Plug & Play dash logger and cluster upgrade kit are specifically designed for Lotus Elise/Exige. If you are installing this kit in a 2008+ then this will directly connect to your factory harness. If using this in a 2004-2007 Lotus Elise / Exige you will need an adapter harness for the older chassis. Aim MX2E Plug & Play Dash Logger Kit For Lotus Elise / Exige Details: Manufacturer: AiM Technologies Manufacturer Part Number: XA6MXPLEE0 Fully replaces factory gauge cluster: Yes Includes Cluster Hood: Yes Includes AiM GPS antenna: Yes Expandable input channels: Yes The display can function as a rearview camera: Yes Wi-Fi connectivity: Yes Need adapter cable for 2008+: No Need adapter cable for 2004-2007: Yes
AiM Sports Solo 2 Lap Timer
AiM Sports AiM Sports Solo 2 Lap Timer $459.00
  AiM Sports Solo 2 Lap Timer The new Solo 2 receives data from two satellite constellations, GPS and Glonass; this is a huge step forward since it is unbelievably faster and more precise than the previous version. The power-on requires only a few seconds and the lap times are calculated with a max 0.02 seconds tolerance. A sleek new case with easier-to-use metal buttons give the new SOLO 2 a premium look and feel. The screen can be backlighted in one of the seven available colors:         FIND YOUR TRACK Solo 2 has access to a database of more than 3,000 tracks all over the world! As soon as it switches on, the Solo 2 identifies its position, recognizes the starting line coordinates of the track, and is ready to start sampling lap times. If your track isn't in the database, no problem: the Solo 2 will automatically enter into autolearning mode, figures out the characteristics of the track, and starts lap-timing anyway. PREDICTIVE LAP TIME LEDS The new Solo 2's predictive lap time engine is now even more reliable. And with configurable RGB LEDs, it will give you a clear, fast indication of how your current lap compares with your best possible lap. That's functionality you typically find only on expensive driver-coaching electronic aids -- now it's at your fingertips with the Solo 2! RACE MODE SELECTION Solo 2 can manage different types of races: Speed races in a closed circuit Point to-point races Regularity Performance tests (0-100 km/h etc.) In each of these configurations, Solo 2 gives the relevant information during the race/test along with powerful data review immediately after each session. ON-SCREEN DATA At the end of your session or race, you can quickly review key lap information right on the Solo 2 color TFT display. WiFi AND iPHONE WiFi communication with your laptop is easy, fast, and with no connectors or cables. It's the best way to configure your Solo 2, manage the track database, and download lap data to your PC. Connect your Solo 2 to your iPhone for a quick and comfortable data analysis, managing your track database, etc. Feel free to give us a call at (844) 438-7244 to discuss the cool new features and capabilities of AiM's latest, greatest compact lap timer today!
AiM Sports MXG 1.2 Large Color TFT Dash and Data Logger
AiM Sports AiM Sports MXG 1.2 Large Color TFT Dash and Data Logger from $2,899.00
AiM MXG 1.2 Large Color TFT 7" Dash & Data Logger The AiM MXG 1.2 data-logging dash represents a huge leap forward in racing display flexibility. The brilliant 800x480 pixel, 7.0" color TFT display frees you from the constraints of a single, factory-designed dash display. The MXG shows you the data you want, the way you want in brilliant, high-contrast color. The MXG 1.2 is a large, brilliant dashlogger designed to acquire and display data coming from your ECU, an internal accelerometer and gyro, the included GPS08 Module, analog/digital inputs and pre-defined math channels. Performance data acquired can be expanded by adding up to eight expansion modules (sold separately). The large 7" high-color display makes it perfect for installation in wider cockpits (like in touring and GT cars). CONFIGURABLE PAGES You can define all the custom pages you wish, choosing from a large library of page styles and colors, defining which data you want to see and where (including end of scale and units of measure). Swapping between pages is as easy as pushing one or two buttons! INPUT/OUTPUT FLEXIBILITY Eight fully configurable analog input channels can sample, log, and display a wide range of temperatures, pressures, and potentiometers (throttle position, steering wheel position, etc). CAN Inputs allow you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (Part No. MC-329, sold separately). These hubs let you connect other inputs such as Lambda Controller (O2), SmartyCam, or even channel expansion hubs, without using any analog channels. A separate CAN Output allows you to send messages to the existing CAN network, adding to the vehicle system control possibilities! The MXG 1.2 can also be connected to many different ECUs to log data gathered by each ECU. An internal three-axis accelerometer, gyroscope, and magnetometer; GPS08 input; four wheel-speed channels; lap time receiver input; and two digital outputs add up to a flexible, expandable data logger that can grow with you. It even has a screw-in port to add analog cameras used for back-up or rear view in visibility-challenged race cars! ALARMS & SHIFT LIGHTS Flexible alarms on the MXG 1.2 include six configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. The integrated shift light array features a host of advanced multicoloured RGB shift light patterns that can be customized as you like, including RPM max for each individual gear. DIGITAL OUTPUTS The MXG 1.2 features two digital outputs (low-side type, switch to ground) that can be configured to activate/deactivate external systems (switch on/off additionallights, cooling fan relays, fluid circulation pumps, etc.) based on those inputs. MEMORY & WIFI CONNECTIVITY The 4GB non-volatile memory can store hours of information for detailed analysis using AiM's latest Race Studio 3 software.  A secure 802.11 WiFi connection makes it even more convenient to configure, calibrate, and download your data wirelessly!  No more need to move your PC close to the vehicle, you can do it from your trailer or tow vehicle up to 60 yards away. FEATURES & SPECS: 9.3" x 5.0" x 1.0" Anodized Aluminum housing Large 7.0" high-contrast color TFT display 800x480 pixel screen resolution Internal 4GB memory Two Motorsports and one Binder connector Weight 2.1 lbs (950g) Waterproof IP65 KIT INCLUDES: MXG 1.2 data logging dash GPS08 Module with cable USB cable wiring harness with 37 pin Deutsch connector installation CD with Race Studio 3 software All other sensors and modules sold separately.
AiM SW4 Steering Wheel
AiM Sports AiM SW4 Steering Wheel from $3,000.00
AiM - The New Steering Wheel SW4 is one of the most versatile steering wheels in the market,compatible with a long list of ECU protocols, to meet any driver’s need. Choose your size Compatible with more than 2,000 ECU protocolsSW4 is one of the most versatile steering wheels in the market, with a long list of compatible ECU protocols, to meet any driver’s need. Freely configurable pagesThe high contrast TFT display offers a wide range of possible graphic data layouts,showing the driver all the information he needs in real time.   Individually configurable pushbuttons!8 completely configurable buttons and 2 additional free contact normally open buttons.Rotary switchesSW4 has 3 completely configurable rotary switches.One by one configurable LEDs, Shift lights can be configured for each gear, choosing LED color and RPM threshold values which will turn it on/off.The 4 Alarms LEDs are configurable too. Clutch and Paddle shifts (optional)SW4 can be upgraded adding paddle shifts and clutch shifts.
AiM Power Distribution Module PDM32 Kit w/ 6
AiM Sports AiM Power Distribution Module PDM32 Kit w/ 6" Display - No Icons (Race Version) $2,500.00
AiM Power Distribution Module PDM32 Kit w/ 6" Display - No Icons The AiM PDM32 Power Distribution Module is designed to distribute power to multiple circuits on your vehicle, replacing traditional fuse & relay systems. AiM Power Distribution Module PDM32 Kit w/ 6" Display - No Icons Details: Manufacturer: AiM Sports Manufacturer Part Number: XC1PDM32D06-C2NI Includes 6" Display w/ No Icons: Yes Includes Choice of GPS Module: Yes 28 high side outputs 4 Half Bridge Outputs Replaces traditional fuse & relay systems AiM PDMs are housed in an anodized billet aluminum case are designed specifically for the rigors of motorsport, and include a complete professional data logger & internal dash controller. Using an AiM PDM at the center of vehicle electronics greatly simplifies your wiring harness and electronics installation while providing much more control. AiM's PDM32 also offers some interesting features that you wouldn't necessarily expect to see in a traditional distribution module, such as: ECU connection for logging data, eliminating the need to add another data logging unit to your car GPS module compatibility for lap timing (GPS module sold separately) Dash controller for managing the 6" or 10" PDM dash displays (displays available separately) 9-axis EMU platform Mirror camera control for adding a reverse camera to the PDM dash display (camera & display available separately) The PDM32 offers 4 different power output levels: 4 rated up to 20 A (high power) 12 rated up to 15 A (mid power) 12 rated up to 10 A (low power) 4 rated up to 35 A (Half Bridge) Protected for over voltage, under voltage, over current, & over temperature Total max current: 120 A Each output provides status feedback for open circuit, short circuit, high temperature, over current, under voltage, & over voltage. Inrush current, number of fault retries, & time between retries are all definable. All the outputs may be configurable as PWM and allow soft start/stop. For every output, a multicolor LED shows the status: Enabled/disabled Activated or not Fault An elegant visual interface allows flexible and powerful configuration for every power output. Some "black boxes" are available for simplifying the configuration. For example, the Wiper may be managed by the LIN connection or using the Half Bridges. The AiM PDM32 features the following input channels: Analog/Digital: 8 Only Digital: 4 Speed: 2 If configured as Analog inputs, it is possible to activate an internal 2K Ohm resistor for connecting most of the sensors directly. If configured as Digital inputs, it is possible to activate a 10K Ohm Pull Up or a 10K Ohm Pull Down. The PDM32 supports the new 6" & 10" TFT displays, fully configurable with Race Studio 3. It also features two analog camera inputs that allow you to swap your display into a mirror camera with the press of a button or through configurable event logic- reverse gear being the most common option. The PDM32 receives, uses, & records data from: ECU- more than 1,000 protocols available Digital/Analog inputs Internal 9-axis EMU GPS- position & lap time Expansions Push buttons, from RIO02 module or from any commercial CAN keypad, than to simple configurability of CAN protocols All the currents & status of all the power outputs Other user-defined math channels AiM PDMs come with 4,000 tracks in their database and automatically select the one you are driving on, in order to calculate Lap Time when you pass the start/finish line. An internal datalogger is available, capable of recording all the analog inputs, digital inputs, ECU channels, GPS values, currents, & status of all the power outputs. 
AiM Power Distribution Module PDM32 Kit w/ 10
AiM Sports AiM Power Distribution Module PDM32 Kit w/ 10" Display - No Icons (Race Version) $2,800.00
AiM Power Distribution Module PDM32 Kit w/ 10" Display - Race Icons The AiM PDM32 Power Distribution Module is designed to distribute power to multiple circuits on your vehicle, replacing traditional fuse & relay systems. AiM Power Distribution Module PDM32 Kit w/ 10" Display - Race Icons Details: Manufacturer: AiM Sports Manufacturer Part Number: XC1PDM32D10-C2NI Includes 10" Display w/ No Icons: Yes Includes Choice of GPS Module: Yes 28 high side outputs 4 Half Bridge Outputs Replaces traditional fuse & relay systems AiM PDMs are housed in an anodized billet aluminum case are designed specifically for the rigors of motorsport, and include a complete professional data logger & internal dash controller. Using an AiM PDM at the center of vehicle electronics greatly simplifies your wiring harness and electronics installation while providing much more control. AiM's PDM32 also offers some interesting features that you wouldn't necessarily expect to see in a traditional distribution module, such as: ECU connection for logging data, eliminating the need to add another data logging unit to your car GPS module compatibility for lap timing (GPS module sold separately) Dash controller for managing the 6" or 10" PDM dash displays (displays available separately) 9-axis EMU platform Mirror camera control for adding a reverse camera to the PDM dash display (camera & display available separately) The PDM32 offers 4 different power output levels: 4 rated up to 20 A (high power) 12 rated up to 15 A (mid power) 12 rated up to 10 A (low power) 4 rated up to 35 A (Half Bridge) Protected for over voltage, under voltage, over current, & over temperature Total max current: 120 A Each output provides status feedback for open circuit, short circuit, high temperature, over current, under voltage, & over voltage. Inrush current, number of fault retries, & time between retries are all definable. All the outputs may be configurable as PWM and allow soft start/stop. For every output, a multicolor LED shows the status: Enabled/disabled Activated or not Fault An elegant visual interface allows flexible and powerful configuration for every power output. Some "black boxes" are available for simplifying the configuration. For example, the Wiper may be managed by the LIN connection or using the Half Bridges. The AiM PDM32 features the following input channels: Analog/Digital: 8 Only Digital: 4 Speed: 2 If configured as Analog inputs, it is possible to activate an internal 2K Ohm resistor for connecting most of the sensors directly. If configured as Digital inputs, it is possible to activate a 10K Ohm Pull Up or a 10K Ohm Pull Down. The PDM32 supports the new 6" & 10" TFT displays, fully configurable with Race Studio 3. It also features two analog camera inputs that allow you to swap your display into a mirror camera with the press of a button or through configurable event logic- reverse gear being the most common option. The PDM32 receives, uses, & records data from: ECU- more than 1,000 protocols available Digital/Analog inputs Internal 9-axis EMU GPS- position & lap time Expansions Push buttons, from RIO02 module or from any commercial CAN keypad, than to simple configurability of CAN protocols All the currents & status of all the power outputs Other user-defined math channels AiM PDMs come with 4,000 tracks in their database and automatically select the one you are driving on, in order to calculate Lap Time when you pass the start/finish line. An internal datalogger is available, capable of recording all the analog inputs, digital inputs, ECU channels, GPS values, currents, & status of all the power outputs. 
AiM PDM CAN-Configurable Keypad - 12-Button
AiM Sports AiM PDM CAN-Configurable Keypad - 12-Button $375.00
AiM PDM CAN-Configurable Keypad - 12-Button  PDM Buttons sold separately here This is a CAN-programmable 12-button panel compatible with AiM PDM systems (PDM08 and PDM32). This keypad comes pre-configured for use with AiM protocols and is ready to be programmed through AiM's RaceStudio software. The buttons measure 15mm size and the overall panel size is 181.5mm x 70.0mm x 16.3mm (7.14x2.75x0.64"). AiM PDM CAN-Configurable Keypad - 12-Button Details: Manufacturer: AiM Sports Manufacturer part number: KEY012 Weight: 220g (7.76oz) Connector: Deutsch 6-pin, DT04-4P Supply voltage: 12-24Vdc, Nominal 8-32Vdc Standy current: <50mA Communications BUS: RS485, CANopen J1939 Operating temperature: -40C to +70C Thermal shock: -40C to +85C Salt spray standard: ASTMB117 Chemical resistance: Dirt, Engine cleaner, Isopropyl alcohol, Multi-purpose cleaner, Muriatic acid Waterproof rating: IP67 Button Inserts Sold Separately  Each button function and backlight is programmed using AiM software and can be set up as momentary, toggle, or multi-position. Once programmed install the button insert for each button. Rear connector is a motorsport-grade Deutsch 6-pin connector wired for power, ground, CAN high, CAN low, TxRx-, and TxRx+.
AiM PDM CAN-Configurable Keypad - 8-Button
AiM Sports AiM PDM CAN-Configurable Keypad - 8-Button $350.00
AiM PDM CAN-Configurable Keypad - 8-Button  PDM Buttons sold separately here This is a CAN-programmable 8-button panel compatible with AiM PDM systems (PDM08 and PDM32). This keypad comes pre-configured for use with AiM protocols and is ready to be programmed through AiM's RaceStudio software. The buttons measure 15mm size and the overall panel size is 123.5mm x 70.0mm x 16.3mm (4.86" x 2.75" x 0.64"). AiM PDM CAN-Configurable Keypad - 8-Button Details: Manufacturer: AiM Sports Manufacturer part number: KEY008 Weight: 170g (6 oz) Connector: Deutsch 6-pin, DT04-4P Supply voltage: 12-24Vdc, Nominal 8-32Vdc Standy current: <50mA Communications BUS: RS485, CANopen J1939 Operating temperature: -40C to +70C Thermal shock: -40C to +85C Salt spray standard: ASTMB117 Chemical resistance: Dirt, Engine cleaner, Isopropyl alcohol, Multi-purpose cleaner, Muriatic acid Waterproof rating: IP67 Each button function and backlight is programmed using AiM software and can be set up as momentary, toggle, or multi-position. Once programmed install the button insert for each button. Rear connector is a motorsport-grade Deutsch 6-pin connector wired for power, ground, CAN high, CAN low, TxRx-, and TxRx+.
AiM GS-Dash and EVO 4S Data Logger Dash Display w/GPS
AiM Sports AiM GS-Dash and EVO 4S Data Logger Dash Display w/GPS $1,599.00
AiM GS-Dash and EVO 4S Data Logger Dash Display w/ GPS The Aim GS-DASH and EVO 4s Data Logger and Racing Dash Display Kit has been designed to show data sampled by the new generation of Aim data logger, the EVO 4S. All data coming from your vehicle’s ECU, from the accelerometers, from the GPS module as well as from your custom sensors. Easy and immediate readability In its compact structure, Aim GS-DASH & EVO 4s Truck Racing Data Logger Kit  features a wide 268x128 pixel display to offer the best readability.  The screen can be backlighted in one of the seven available colors and the incorporated light sensor makes brightness and contrast ideal in all light conditions. Up to 9 pages showing the data you need In its compact structure, GS-Dash features a wide 268x128 pixel display to maximise readability.  The screen can be backlighted in one of the seven available colors and the incorporated light sensor makes brightness and contrast ideal in all light conditions. Lap times You can see your truck rolling time, static or predictive lap times (as an absolute value or as a difference vs. the Best Lap). Recall your session highlights A key-data summary is available at the end of each session where you can also see a list of all the laps of the sessions, with their times, min/max speed and min/max RPM's. Configure your LED’s One by One Five RGB shift lights can be configured for each gear, choosing LED color and RPM threshold values which will turn it on/off. Alarms are managed in a very flexible way: you can choose the situation that generates the alarm, the LED behavior (blinking frequency and color) when the alarm appears and the conditions for its switch-off. A warning message can also be shown. Easy Configuration Configuration of Shift lights, alarms and customized data pages is intuitive and immediate using the dedicated Race Studio 3 software. Shift Lights and Alarms are to be configured using Race Studio 3 configuration panel (see image on the left). Data is viewed in customisable pages. With few clicks you can enable up to eight Custom Pages: you decide where to show the desired variables (up to 4 on each page) from those sampled by the ECU, the accelerometers and the GPS values from EVO4S/EVO5. Configuration can be done either using Race Studio 3 (see panel on the left) or via keyboard (see below).   Compact and resistant chassis Its small dimension makes it particularly suitable for small cockpit installation (i.e. bikes, formula cars). Manufactured in aluminum with edge-to-edge glass and metallic pushbuttons the GS-Dash is robust and fully waterproof.