Porsche Harnesses

Schroth Porsche GT3 Enduro 2x2 6 Point Racing Harness THIS HARNESS FITS THE FOLLOWING VEHICLES: Porsche 991 GT3/GT3RS Porsche 981/718 GT4/GT4RS Porsche 918 DESIGNED FOR THE FASTEST DRIVER CHANGES Comes in black and red with 2" shoulder and 2" waist/sub belts. The Schroth Porsche GT3 Enduro 2x2 Harness takes the best features of the best-selling Enduro belt and adds a few improvements. Save time in driver changes with the Schroth Enduro belt with "ZIP Adjusters" that allow for exceptional ease of adjustment (tightening) and release for faster and smoother driver changes. Note: This harness is designed for street cars with Porsche's factory One-Piece Carbon Bucket seats. If you are in a GT3 Cup Car or have a different fixed-back race seat, a standard Enduro will be better suited for your vehicle. Endurance racing drivers need to be able to get in and out of the car quickly and easily during a race. The Schroth Porsche GT3 Enduro 6 Point Racing Harness uses the newest, most innovative technology available to ensure ease of use during quick driver changes in the most arduous conditions. The Schroth Enduro 6 Point Racing Harness is considered the fastest, easiest harness to use among many drivers. All while maintaining the superior quality and durability for which Schroth is famous. The Schroth Porsche GT3 Enduro 2x2 Racing Harness has been tested for quality and ease of use in the WEC endurance series and in 24-hour races at legendary venues like Germany’s Nürburgring Nordschleife. The Schroth Enduro 6 Point Harness is at the top of its game, constructed for racers who need superior driver restraint technology. The new design of the ZIP Adjuster is integrated into the lap belt buckle attachments, making the position of the adjusters ideal for quick, precise tightening. This design -- featuring clearly-marked belt release straps, extra large, easy-to-see, yellow hand loops on the lap belts -- also ensures efficient, smooth releases and tightenings for quicker, easier driver changes. The Schroth Enduro 6 Point Racing Harness also has these ZIP Adjusters on the shoulder belts. MADE ESPECIALLY FOR YOUR PORSCHE Schroth ups the ante with its Porsche GT3 Enduro 2x2, with sewn-in lap belt attachments specifically for Porsche's OEM carbon bucket seats. The lap belts bolt in simply, without any drilling or other modifications for a factory-installed look. Attachment of the shoulder belts requires the use of a roll bar or harness bar, and the sub straps must be mounted to a sub strap bar beneath the seat. BUILT FOR ENDURANCE RACING AND BEYOND The Schroth Enduro 2x2 6 Point Harness is a first choice for endurance racing teams, racing schools, and corporate ride-along venues where transitioning in and out of the race car quickly while maintaining top safety and durability is a winning combination. The Schroth Enduro 2X2 6 point race belt is Schroth's top-of-the-line racing harness for Endurance racing. The Schroth Enduro belt features the widely praised ZIP Adjusters integrated into the lap belt buckle attachments to optimize the position of the adjusters for perfect and fast adjustment. The rotational design of the ZIP Adjusters allows for exceptional ease of adjustment (tightening) and release for faster and smoother driver changes. The Schroth Enduro 2X2 6 point harness is designed specifically for when fast driver changes are needed in endurance racing. The lap belt straps have large, easy to grab adjuster loops for the easiest adjustment. Newly designed compact aluminum rotary buckle features a quicker, more positive “click” and an ergonomic release lever. One of the main features of the Enduro 2X2 belt systems is the 2" (50mm) lap belt for added safety over 3" designs. A 2" belt rides within the crest of the human pelvis where a 3" belt would rest on the edges. This allows you to get the belt up to an inch and a half tighter. That means the lap belt will be working earlier in an accident because it gets loaded faster. It's also more comfortable and easier to adjust because there's less friction through the adjuster. SCHROTH ENDURO 2X2 PORSCHE GT3 SHOULDER BELTS This is the first thing a Schroth Profi II racer is going to notice - the shoulder belts. Instead of going from 2" from the adjuster up and 3" from the adjuster down, the Enduro 2x2 has a full length 2" wide shoulder belt. At first, being a racer who does not like change, I wanted my same 3/2" shoulder belt. Upon sitting in a race seat and mounting the harness, Schroth actually improved on something I though did not need improvement. They are easy to lay up on my HANS device, are a little lighter, and the new small adjusters are nice. Actually, really nice. I like the new lightweight adjusters better than my Profi II. This is a nice upgrade I did not know needed upgrading. The shoulder belt camlock ends are still keyed (angled) for individual left and right to keep driver comfort at a maximum, no matter how large or small the driver is. We love this feature on all Schroth belts. SCHROTH ENDURO 2X2 PORSCHE GT3 WAIST BELTS At first look, you appreciate the technology that Schroth puts into their ZIP adjusters that are part of the slip-in end of the waist belt. Spring loaded, but easy to release. German perfection is found in the Schroth Enduro series harness sets. Featuring a precise sewn-in waist belt to chassis fitting, the Schroth Porsche waist belt fits perfect. Everything is in the perfect position and legal for all competition you may see, even the 24 Hours of LeMans. We sew the Schroth B43A end on both of the waist belts so installation is like your super car came out of Stuttgart. Schroth Porsche GT3 Enduro 2x2 Harness Waist Belts 2" vs 3". All Schroth Enduro Belts are 2" (50mm) wide and are more effective that the 3" (75mm) waist belt. Why is 2" webbing more effective than 3" webbing? Let's start looking at the shape of our human body. The Iliac Crest (IC) is the part of the pelvic bone that sticks out above the hips. 2" webbing fits entirely within the recession created by the Iliac Crest where 3" webbing rides over the top of the Iliac Crest. Because of this, the 3" webbing has less contact area by percentage than the 2" webbing which will cause more bruising during an impact where the belt is making contact with the pelvic bone. Since the 2" webbing rides inside the Iliac Crest, it can be worn as much as 1" to 1.5" tighter and at the same time is more comfortable for the driver. Since the 2" webbing fits well within the Iliac Crest of the pelvis, it is less likely to slide up above the crest and cause submarining, a condition where the body slides down below the lap belt possibly causing internal organ damage.Research shows that the faster the pelvis is captured, the lower the resultant loads on the chest, head, and neck. There is no difference in the strength of the 2" webbing vs the 3" webbing. All webbing - 2" or 3" - must meet the same FIA homolgation test loads.There is an additional benefit of the 2" lap belts. The required force to properly and tightly adjust the belts in the car is much easier than with 3" belts. We at DiscoveryParts love and prefer the Schroth 2" waist belt system. Schroth Porsche GT3 Enduro 2x2 Harness Camlock: different or the same? The buckle looks like our old reliable Schroth Profi cam lock in non-glare matte black, and looks and feels the same externally. The only upgrade is a different amount of force required to turn the buckle. It is solidly positioned and has a very sharp snap when releasing. Nothing too drastic, if you start turning the camlock (in either direction) it just is tight, tight, tight, and boom - released. Actually there is no boom, it just releases cleanly. Schroth Porsche GT3 Enduro 2x2 Harness Sub Belt: safety is #1 with Schroth and comfort is elevated beyond any other harness competitor. Going back to safety, the buckle position is not just important, but paramount. For the loading of the belts to be properly spread over your pelvis, Iliac crest, and upper torso, we need the buckle to be positioned correctly on the driver. To help position the belt easily the first time and quickly fine-tune the position for a multiple driver car, Schroth added two adjusters for you. Sub-belt install time of a Schroth harness is 70% less than competitor harness sets. Available in Black or Red See Schroth's Harness Installation Checklist Here SCHROTH ENDURO 2X2 PORSCHE GT3 RACING HARNESS DETAILS FIA 8853-2016 Homologated Specific lap belt attachments for Porsche OEM carbon bucket seats ZIP Adjusters in lap and shoulder belts ensure quick, easy fit Extra large, easy-to-grab hand loops on the shoulder belts Sewn-in bungee loops on the shoulder belts Two-inch (50mm) lap belts provide superior safety and comfort Patented RFR lightweight buckle INCLUDED HARDWARE (6) SG23 7/16" Eyebolts (2) SG39 7/16" Backing Plates (12) S3 7/16" Lock Washers Lap belt attachments are designed for Porsche OEM carbon bucket seats only.

Schroth Profi Porsche GT3 Cup 2x2 Harness This is a specially made harness that is built after ordering. Please allow 2 weeks to build this custom harness. Fitting the Porsche GT3 Race Car perfectly. If your car has center-lugs and an air-jack from the factory, this your belt. If you are GT3 came with a carpet, then the Schroth Flexi 2x2 Porsche GT3-GT4 6 Point Racing Harness is a better fit. Porsche 991 GT3 Cup Cars Come With Schroth Belts Direct From The Factory. If you need to replace them because of an incident, updating or if you're putting the factory GT3 seat setup into another car, you'll want these Schroth Profi Porsche 991 2x2 belts. Schroth Porsche 991 GT3 Cup 2x2 Harness Details: Manufacturer: Schroth Colors: Black, Blue, Red, Yellow Shoulder belt width: 2" Waist belt width: 2" (pull-down to tighten) Sub belt width: 2" Shoulder belt attachment: Wrap (around harness bar) Waist belt attachment: Special Porsche GT3 sewn in fitting Sub belt attachment: Snap ends (eye bolts & washers included) Ratings: FIA 8853-2016 Approved Valid through 2027 Schroth Porsche 991 GT3 Cup 2x2 Harness Part Numbers: Black: SR-94660U-0 Blue: SR-94660U-1 Red: SR-94660U-2 Yellow: SR-94660U-H2 Schroth Porsche 991 GT3 Cup 2x2 Harness Shoulder Belts: This is the first thing a Profi II racer is going to notice - the shoulder belts. Instead of going from 2" from the adjuster up and 3" from the adjuster down, the Profi 2x2 has a full length 2" width shoulder belt. At first, being a racer who does not like change, I wanted my same 3/2" shoulder belt. Upon sitting in a race seat and mounting the harness, Schroth actually improved on something I though did not need improvement. Easy to lay up on my Hans device, are a little lighter, and the new small adjusters are nice. Actually, really nice. I like the new lightweight adjusters better than my Profi II. This is a nice upgrade I did not know needed upgrading. The shoulder belt camlock ends are still keyed (angled) for individual left and right to keep driver comfort at a maximum, no matter how large or small the driver is. We love this feature on all Schroth belts. Schroth Porsche 991 GT3 Cup 2x2 Harness Waist Belts: Featuring a perfect sewn-in waist belt to chassis fitting, the Schroth Porsche waist belt fits perfectly. Everything is in the perfect position and legal for all competition you may see, even the 24 Hours of LeMans. Below is an image of your sewn-on waist belt to chassis fitting. Schroth Porsche 991 GT3 Cup 2x2 Harness Waist Belts 2" vs 3": All Schroth Flexi Belts are 2" (50mm) wide and are more effective that the 3" (75mm) waist belt. Why is 2" webbing more effective than 3" webbing? Let's start looking at the shape of our human body. The Iliac Crest (IC) is the part of the pelvic bone that sticks out above the hips. 2" webbing fits entirely within the recession created by the Iliac Crest where 3" webbing rides over the top of the Iliac Crest. Because of this, the 3" webbing has less contact area by percentage than the 2" webbing which will cause more bruising during an impact where the belt is making contact with the pelvic bone. Since the 2" webbing rides inside the Iliac Crest, it can be worn as much as 1" to 1.5" tighter and at the same time is more comfortable for the driver. Since the 2" webbing fits well within the Iliac Crest of the pelvis, it is less likely to slide up above the crest and cause submarining, a condition where the body slides down below the lap belt possibly causing internal organ damage. Research shows that the faster the pelvis is captured, the lower the resultant loads on the chest, head, and neck. There is no difference in the strength of the 2" webbing vs the 3" webbing. All webbing - 2" or 3" - must meet the same FIA homolgation test loads. There is an additional benefit of the 2" lap belts. The required force to properly and tightly adjust the belts in the car is much easier than with 3" belts. We here at DiscoveryParts love and prefer the Schroth 2" waist belt system. Schroth Porsche 991 GT3 Cup 2x2 Harness Camlock: Different or the same? The buckle looks like our old reliable Schroth Profi cam lock in non-glare matte black, and looks and feels the same externally. The only upgrade is a different amount of force required to turn the buckle. It is solidly positioned and has a very sharp snap when releasing. Nothing too drastic, if you start turning the camlock (in either direction) it just is tight, tight, tight, and boom - released. Actually there is no boom, it just releases cleanly. Schroth Porsche 991 GT3 Cup 2x2 Harness Sub-Belt: Schroth Flexi 2x2 6 point harness has a dual sub strap system with T bar camlock connection. For comfort, Schroth uses a double dog leg fabric style that lets the flat part of the belt touch you, not the side. Safety is #1 with Schroth and comfort is elevated beyond any other harness competitor. Going back to safety, the buckle position is not just important, but paramount. For the loading of the belts to be properly spread over your pelvis, Iliac crest, and upper torso, we need the buckle to be positioned correctly on the driver. To help position the belt easily the first time and quickly fine-tune the position for a multiple driver car, Schroth added two adjusters for you. Sub-belt install time of a Schroth harness is 70% less than competitor harness sets.

Schroth Flexi 2x2 Porsche GT3/GT4 Racing Harness Porsche GT3 Cup Cars come with Schroth belts direct from the factory. If you're putting harnesses in your Porsche GT3, GT3RS, or GT4 with the Lightweight Bucket (LWB) seat setup, you'll want these belts! The Flexi 2x2 GT3 features 2” shoulder belts ideal for Frontal Head Restraint (FHR or HANS) devices. It has 2" pull-down Profi lap belts with sewn-in anchors specifically made for Porsche's carbon fiber Lightweight Bucket ("LWB") seats. A T-bar adjustable sub-strap is standard, and shoulder- and sub-strap attachment hardware is wrapped in. The FHR/HANS specific shoulder belts are designed to make the driver safer and more comfortable. The full 2" shoulder webbing fits perfectly on a FHR or HANS device, creating optimal force distribution on the surface of the device. The main impetus behind the 2" lap belt is added safety. A 2" belt rides within the crest of the human pelvis, where a 3" belt would rest on the edges. This allows you to get the belt up to an inch-and-a-half tighter, so the lap belt will work earlier in an accident because it gets loaded faster. It's also more comfortable and easier to adjust as there's less friction through the adjuster. Comes with Porsche-specific attachments for the lap belts and snap-in attachments at sub-strap points. The shoulders come ready to be wrapped around a roll bar or roll cage. Bolt-in attachments can be purchased separately for shoulder- and sub-straps. Available in Black and Red. If you drive a GT3 Cup car or are driving a Porsche with a fixed-back racing seat, a standard non-Porsche harness such as the Enduro 2x2 or Flexi 2x2 would be better suited for your vehicle. See Schroth's Harness Installation documentation here. FEATURES: FHR/HANS specific 2” shoulder belts. 2” Flexi pull-down lap belts with sewn-in Porsche hardware. T-bar adjustable sub-strap. Rotary cam lock. FIA 8853-2016 homologation.

Schroth Porsche GT3/GT4 Four-Point Harness (ASM) Fits The Following Cars (Only With Factory Carbon Bucket Seats): Porsche 996/997/991/992 GT2RS, GT3, GT3RS Porsche 981/718 GT4, GT4RS Porsche 918 DESIGNED ESPECIALLY FOR YOUR PORSCHE The Schroth Porsche GT3/GT4 four-point harness is designed specifically for the factory Porsche one-piece carbon seats. This harness comes with specific lap-belt brackets that don't require any drilling for installation, as they attach to the factory-engineered lap-belt mounting locations. A harness bar or roll bar are required for installation of the shoulder belts. Schroth's exclusive ASM (anti-submarine) technology on this four-point harness holds the driver pelvis snug in case of a crash, preventing submarining below the lap belt and sliding out of the seat. With this harness, there no need to install a sub-strap mounting bar under the seat, which is also very useful for Porsche passenger seats that don t have a pre-cut sub-strap slot. The Schroth Porsche GT3/GT4 Four-Point Harness has a street-legal FE Camlock that releases like a traditional seat belt -- just a push of the button! Designed for Porsche OEM lightweight carbon bucket seats. This is NOT an FIA homologated competition restraint. SCHROTH PORSCHE GT3/GT4 4-POINT ASM HARNESS DETAILS Manufacturer: Schroth Available colors: black, red Not FIA homologated FMVSS209 Approved for use as primary restraint on USA roads Shoulder belts: 2" webbing, pull-down adjusters Lap belts: 2" webbing, pull-down Zip adjusters Shoulder fittings: LV4 (2" shoulders) LV10 also included Lap fittings: Sewn-in B43A (Porsche-specific hardware) INCLUDED HARDWARE (2) S82 flat washers (2) S184 flat washers (2) SG29 bolts (2) S104 spacers/collars

Sabelt Enduro Silver Series Porsche GT2/GT3/GT4 Racing Harness Built specifically for the Porsche GT2, GT3, and GT4, this six-point Sabelt Enduro Silver Series racing harness provides all the safety and security you've come to expect from Sabelt in a package that makes installation in your Porsche extremely fast and easy. The Sabelt Silver Series harness is easily adjusted using bright yellow tabs that pull down, making securing and releasing your harness simpler than ever. NEW FULLY INTEGRATED CAM LOCK The newly designed cam lock buckle now integrates the sub belts into the fixture, greatly increasing driver safety in the event of an impact. A number of other handy features have been added, including Velcro communication/hydration routing on top of shoulder straps and silicone grip on the underside to keep your head-and-neck restraint device securely in place while on the track. Sabelt is an industry-leading manufacturer of motorsport harnesses and safety accessories, and their Silver Series Enduro Porsche racing harnesses stand out for good reason. SABELT SILVER SERIES ENDURO PORSCHE RACING HARNESS DETAILS Manufacturer: Sabelt Manufacturer part no.: CFCIxxx00024 FIA 8853-2016 homologation Available in black, blue, or red webbing New camlock buckle fully integrated with the sub belts Bright yellow pull-down straps for easy adjustment Velcro on shoulder straps secures loose ends Communication/hydration routing on shoulder belts

Sabelt Porsche GT3/GT4 4 Point Harness Built specifically for the Porsche GT2, GT3, and GT4, these four-point racing harnesses provide all the safety and security you've come to expect from Sabelt in a package that makes adding safety to your Porsche extremely fast and easy. The harness is easily adjusted using the bright yellow tabs that pull down, making securing and releasing your harness simpler than ever. A number of other handy features have been added, including communication/hydration routing on top of shoulder straps and silicone grip on the underside to keep your head-and-neck restraint device securely in place while on the track.Sabelt is an industry leading manufacturer of motorsport harnesses and accessories, for good reason. FEATURES: NOT FIA or SFI CERTIFIED Easily adjusted using the yellow pull-down straps. Velcro patches on shoulder straps for securing loose ends. Communication/hydration routing on shoulder belts keep lines secure and out of the way.

CMS Performance Sub Strap Mount for Porsche Lightweight Carbon Bucket Seats This Product Fits the Following Cars: 992 GT3/GT3RS 991.1 & 991.2 GT3/GT3RS 991.2 GT2RS 981 Cayman GT4 718 Cayman GT4 718 Cayman GT4RS The Best Way to Install Sub Straps in your Porsche The CMS Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five-, six-, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Light Weight Bucket seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the CMS Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base. The CMS Performance Sub Strap Mount fits the driver- and/or passenger-side seats. Born In The USA CMS Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA. Made of solid carbon steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. CMS Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety. CMS Performance Sub Strap Mount Details: Solid steel construction for maximum safety Allows full fore/aft and up/down seat adjustment Powder-coated satin black standard; several Porsche colors available in the drop-down above! Fits driver or passenger seat (Porsche LWB only) Simple to install Compatible with OEM seat belt and airbag hardware

Sub Strap Mount for Porsche LWB   For cars with Porsche OEM CFRP Full Bucket ("Lightweight Bucket" or "LWB") Seats Only. FITMENT: 992 GT3/GT3RS 991.1 & .2 GT3/GT3RS 992 GT3/GT3RS 991.2 GT2RS 981 Cayman GT4 718 Cayman GT4 The Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five-, six-, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Lighweight Bucket Seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base. The Performance Sub Strap Mount fits either driver- or passenger-side seats. Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA. Made of solid steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. The Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety.     FEATURES: Solid steel construction for maximum safety Allows full fore/aft and up/down seat adjustment Powder-coated to match OEM seat base Fits driver or passenger seat (Porsche LWB only) Simple to install Compatible with OEM seat belt and airbag hardware