HD Racing Video

AiM Sports SmartyCam 3 Dual Data Logger Camera The SmartyCam 3 Dual is a true dual lens HD motorsports camera and data logger designed for the rigors of competition. Taking the best features of the SmartyCam 2.1 and 2.2 GPHD, the SmartyCam 3 Dual brings two full HD images from independant cameras in H.264 1920x1080 pixels at a clear 60 fps. AiM Sports SmartyCam 3 Dual Data Logger Camera Details: Manufacturer: AiM Manufacturer part number 67 : XS3DB6767L2L200 Manufacturer part number 84 : XS3DB8484L2L200 Manufacturer part number: 120 : XS3DB120120L2L200 Video format: H.264 1,920x1,080 pixels @ 60 fps Display resolution: 2.4" 240 x 320 pixels Lens: Low distortion camera lens CMOS Sensor: Global shutter Field of view: 67 , 84 or 120 Internal battery: Rechargeable lithium battery Video Out: 3G-SDI External power: 9-15 V Supported MicroSD Card (not included): Up to 2TB Usage temperatures: -10 C/+50 C Auto Power On/Off: Yes Auto Start/Stop Recording: Yes Body: Anodized Aluminum Dimensions: Main unit 154.4 x 109.6 x 42 mm Dimensions: Bullet camera 24 diam x 48.2 mm Connectors: Deutsch 22 pin (1), SMA SDI Video out (1), SMA bullet connection (2), USB-C (1) Bullet camera cable length: 2M Weight: Main unit 800 g Weight: Bullet camera each 45 g Waterproof: IP65 Dual Motorsports CamerasThe SmartyCam 3 Dual features two separate bullet cameras that are easily placed anywhere in the cockpit with the included 2M (6.5' foot) SMA cables. SMA cables are small, shielded, and feature threaded connections on each end for the best in video data in the harshest of race conditions. Video Streaming OutputSmartyCam 3 Dual features a video streaming output channel with SDI interface. Your 3G-SDI format video and audio stream is now able to be sent to a data streamer at your choice of 30 or 60 fps. Live data streaming has never been easier. RaceStudio 3 with AnalysisThe AiM Race Studio 3 software is included to allow you to customize and configure your overlays in a virtually infinite variety of ways. You can easily add your team logo, sponsor information, track map or graphic objects from a list of pre-determined sets with the same layout or single objects from different sets, This could even be adding your second camera video in Picture in Picture mode with your team logo and track map showing.. AiM RaceStudio 3 is powerful and fully customizable for your team and sponsor needs.Video Analysis Post RaceThe entire video session is then downloaded on your PC and then split easily. Replay of individual videos of separate laps can now be simultaneously viewed to identify best race line and lowest lap time. Share and Compare is now available for you to compare your best lap with your friends personal best. AiM Race Studio 3 makes lower lap times easy.Internal Datalogger Built-inThe SmartyCam 3 Dual has a second ECU CAN interface allowing for CAN expansions without the need for an ECU bridge. Both your video and CAN data is stored on a standard removable SD card with capacity of up to 2TB with all data stored in MP4 file format. At the end of your test, your SD Card contains all the information you need for a deep data analysis and lower lap times. SD card is sold separately.Designed for the extremeThe SmartyCam 3 Dual is a true motorsports camera protected by a solid aluminum housing with a hard anodized finish. Built for the rigors of racing with an IP65 waterproof rating, the SmartyCam 3 Dual is at home in your Porsche GT3 Cup, Super Trofeo, TA2 Camaro, F4, or 125cc Shifter Kart. Whatever you drive, Trust the AiM SmartyCam 3 Dual to get you great video and data.Automatic Start & StopEasy integration and automation with your AiM family of data components. The SmartyCam 3 Dual can be set up to automatically power on, start recording, stop recording, lock your data and video file and power down. Focus on your competition, not your proven data system.No "Wave Effect" with Global Shutter CMOSSolid motor mounts, straight cut gearboxes, and hi revving race engines affect most wave type shutter systems. If you have ever seen a video that gets “wavy” at high RPM’s, you are seeing the limits of wave shutters. SmartyCam 3 Dual uses the solid CMOS Global Shutter to provide quality, crisp, clear videos in the most aggressive of race cars.High Quality Video in a Small Video File SizeOptimized video compression in H.264 allows a more compact video size for a perfect balance of file size and video quality. Full HD is accomplished without the massive file size normally required using this compression. Championship World Racing League, SRO, and ChampCar teams swap video cards at every practice, qualifying and race pit stop. This data is only readable after it is uploaded, so the H.264 allows for a faster data download of your driver and vehicle’s performance and vehicle health.

AiM Trackday Kit SmartyCam HD 67 Lens + Solo 2 DL USA The AiM Trackday kit features a Solo 2 DL, SmartyCam HD Rev 2.1, a suction cup mount that holds both devices, and the associated cables to allow each device to function properly. AiM Trackday Kit SmartyCam HD 67 Lens + Solo 2 DL USA Details: Manufacturer: AiM Technologies Manufacturer Part Number: X99SHD6796U2DL Solo 2 DL Connection: OBD2 SmartyCam HD Lens Angle: 67 Included mount carries both devices: Yes Suction Cup mount included: Yes Included needed cables: Yes What are the differences between the AiM Solo 2 and the new AiM Solo 2 DL? The DL stands for engine and vehicle data download. If you have a modern vehicle, your AiM Solo 2 DL can extract your engine and chassis data and extrapolate that information for a better understanding of not just driver performance, but vehicle performance and health. AiM Solo 2 DL Details: Manufacturer: AiM Manufacturer base part number: X47SOLO2001U0 Manufacturers part number Solo 2 DL with OBD2 cable: X47SOLO2DL01U0 Display: Graphical Display resolution: 128 x 64 pixels Display pages: Up to 8 freely configurable Backlight: 7 configurable RGB colors Shift lights/alarm LEDs" 10 configurable RGB LEDs Integrated track database: Yes Inertial platform: Internal 3 axis 5G accelerometer + 3 axis gyro + 3 axis magnetometer WiFi connection: Yes GPS sampling rate: 10Hz ECU connection: Yes via OBD-2 cable included Connectors: 1 socket (binder) 712, 5-pins, 1 socket (binder) 712, 8-pins memory: 4 GB Battery type: Lithium rechargeable Pushbuttons: Metallic Dimensions: 98.0 x 73.7 x 30.2 mm Weight: 240 g, internal battery included Waterproof: IP67 AiM Solo 2 DL Improvements: GPS: Ability to use both GPS and Glonass allowing for faster power-up Lap accuracy: with up to 2/100 sec of tolerance Backlight: 7 color options Auto Learning: If you are at a new track, the AiM Solo 2 will auto-learn the course RGB LEDs: RGB (Red/Blue/Green) LEDs are user-configurable Recall: On-screen data recall for easy quick review Wi-Fi: Download via Wi-Fi without cables iPhone connection: Data download to your iPhone Choose from 7 backlight colors for a perfect display Configurable RGB LEDs for predictive lap times or your custom information Fully loaded database of over 3,000 world tracks The AiM Solo 2 DL has access to over 3,000 tracks from all over the entire globe. As soon as you turn your Solo 2 DL on, the internal processors self identify your exact position and recognizes the official track starting line coordinates and prepares for auto-recording of your lap times. SmartyCam Control Put your engine and performance data directly onto your SmartyCam HD video Complete SmartyCam HD Control Seamless full camera control with no additional driver inputs, your Solo 2 DL does all the work Race Mode Selection AiM Solo 2 DL can manage 4 different types of racing: Speed races in a closed circuit (road race/circle track) Point to point races: Hill Climbs, Autocross Regularity: Your custom area Performance tests: 0-60mph, 0-100mph user-programmable to custom fields WiFi Download Download via any WiFi device No cables to lose or leave at home Download to Race Studio 3 fast and easy On-Screen Data Recall Post-session easy review Perfect for driver coaches compilation of your most important data fields We have been amazed (and faster) with the information the AiM Solo 2 DL provided and we welcome the newest addition, and feature-packed AiM Solo 2 DL to our AiM data logging line. Thank you AiM for making data logging and analysis easy. SmartyCam HD Rev.2.1 By AiM Changes Racecar Video Forever. AiM started with the game-changing SmartyCam original (grey unit). When the SmartyCam grew again to the HD (black box) the already loved features remained and even a few more were added. Now we present the SmartyCam HD Rev.2. The culmination of every video camera AiM has produced. Other cameras systems sorry...Check and Mate AiM SmartyCam HD Rev. 2.1 Video Camera With Video Overlay Details: Manufacturer: AiM Manufacturer part number: 67 X98SHD04J6721 Manufacturer part number: 84 X98SHD04J8421 Connection on camera to dash harness or data hub: SmartyCam 7 pin female Connection cable has available 3.5mm female jack for an external microphone or radio connection SmartyCam HD Revision 2.1 automatically overlays on videos all the data you need: speed, RPM, lap number, gear shifts, and much more. Simply choose the data and the graphic layout you prefer in the huge selection of overlays available. What Kind of Data:SmartyCam HD overlays data from different sources on the videos themselves. From GPS: track map and vehicle position, as well as speed, lap and split times. From AiM logger connected to your ECU: RPM, throttle, engaged gear, acceleration, temperatures, pressures, and - in presence of additional sensors - also their values. All this info will be overlayed on videos in every single point of the track. SmartyCam HD uses the newest Race Studio 3, the powerful software which allows you to configure all details of your videos and to get plenty of fun and information out of them. You can configure your overlays in a virtually infinite variety of modes: add your logo and the track map, and choose your graphic objects from a list of pre-determined sets with the same layout or even single objects from different sets. Your videos will be truly "yours" in all details, from the data to their graphic layouts Video analysisThe video of a whole session once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap: so that you can simultaneously watch two of them and check where you were faster or slower. The same operation can be performed with any SmartyCam HD video recorded on the same track: you will be able to compare your best lap with your friends' personal best! A lens specifically designed for Motorsports must be robust, must be able to work when the engine rolls 100 times per second, and have good resolution and brightness. But above all a lens designed for motorsports must reduce distortion, which is a typical problem of lenses used by generic action-cameras: objects placed at ten meters' distance look very far, making it impossible to accurately determine whether the track is straight or curved. SmartyCam HD telecentric lens with six elements reduces distortion to the minimum and will withstand track vibrations for years. Moreover, the lenses with different HFOV's allow a tailor-made framing in all kinds of vehicles.

AiM Trackday Kit SmartyCam HD 84 Lens + Solo 2 DL The AiM Trackday kit features a Solo 2 DL, SmartyCam HD Rev 2.1, a suction cup mount that holds both devices, and the associated cables to allow each device to function properly. AiM Trackday Kit SmartyCam HD 84 Lens + Solo 2 DL USA Details: Manufacturer: AiM Technologies Manufacturer Part Number: X99SHD8496U2DL Solo 2 DL Connection: OBD2 SmartyCam HD Lens Angle: 84 Included mount carries both devices: Yes Suction Cup mount included: Yes Included needed cables: Yes What are the differences between the AiM Solo 2 and the new AiM Solo 2 DL? The DL stands for engine and vehicle data download. If you have a modern vehicle, your AiM Solo 2 DL can extract your engine and chassis data and extrapolate that information for a better understanding of not just driver performance, but vehicle performance and health. AiM Solo 2 DL Details: Manufacturer: AiM Manufacturer base part number: X47SOLO2001U0 Manufacturers part number Solo 2 DL with OBD2 cable: X47SOLO2DL01U0 Display: Graphical Display resolution: 128 x 64 pixels Display pages: Up to 8 freely configurable Backlight: 7 configurable RGB colors Shift lights/alarm LEDs" 10 configurable RGB LEDs Integrated track database: Yes Inertial platform: Internal 3 axis 5G accelerometer + 3 axis gyro + 3 axis magnetometer WiFi connection: Yes GPS sampling rate: 10Hz ECU connection: Yes, 3 available Connectors: 1 socket (binder) 712, 5-pins, 1 socket (binder) 712, 8-pins memory: 4 GB Battery type: Lithium rechargeable Pushbuttons: Metallic Dimensions: 98.0 x 73.7 x 30.2 mm Weight: 240 g, internal battery included Waterproof: IP67 AiM Solo 2 DL Improvements: GPS: Ability to use both GPS and Glonass allowing for faster power-up Lap accuracy: with up to 2/100 sec of tolerance Backlight: 7 color options Auto Learning: If you are at a new track, the AiM Solo 2 will auto-learn the course RGB LEDs: RGB (Red/Blue/Green) LEDs are user-configurable Recall: On-screen data recall for an easy quick review Wi-Fi: Download via Wi-Fi without cables iPhone connection: Data download to your iPhone Choose from 7 backlight colors for a perfect display Configurable RGB LEDs for predictive lap times or your custom information Fully loaded database of over 3,000 world tracks The AiM Solo 2 DL has access to over 3,000 tracks from all over the entire globe. As soon as you turn your Solo 2 DL on, the internal processors self identify your exact position and recognizes the official track starting line coordinates and prepares for auto-recording of your lap times. SmartyCam Control Put your engine and performance data directly onto your SmartyCam HD video Complete SmartyCam HD Control Seamless full camera control with no additional driver inputs, your Solo 2 DL does all the work Race Mode Selection AiM Solo 2 DL can manage 4 different types of racing: Speed races in a closed circuit (road race/circle track) Point to point races: Hill Climbs, Autocross Regularity: Your custom area Performance tests: 0-60mph, 0-100mph user-programmable to custom fields WiFi Download Download via any WiFi device No cables to lose or leave at home Download to Race Studio 3 fast and easy iPhone Connectivity Easy, fast true data analysis Manage your track database View engine parameters On-Screen Data Recall Post-session easy review Perfect for driver coaches compilation of your most important data fields We have been amazed (and faster) with the information the AiM Solo 2 DL provided and we welcome the newest addition, and feature-packed AiM Solo 2 DL to our AiM data logging line. Thank you AiM for making data logging and analysis easy. SmartyCam HD Rev.2.1 By AiM Changes Racecar Video Forever. AiM started with the game-changing SmartyCam original (grey unit). When the SmartyCam grew again to the HD (black box) the already loved features remained and even a few more were added. Now we present the SmartyCam HD Rev.2. The culmination of every video camera AiM has produced. Other cameras systems sorry...Check and Mate AiM SmartyCam HD Rev. 2.1 Video Camera With Video Overlay Details: Manufacturer: AiM Manufacturer part number: 67 X98SHD04J6721 Manufacturer part number: 84 X98SHD04J8421 Alternate part number: AIM-MC-549-Rev2.1 Cable included length: 4M Connection on camera to dash harness or data hub: SmartyCam 7 pin female Connection cable has available 3.5mm female jack for an external microphone or radio connection SmartyCam HD Revision 2.1 automatically overlays on videos all the data you need: speed, RPM, lap number, gear shifts, and much more. Simply choose the data and the graphic layout you prefer in the huge selection of overlays available. What Kind of Data:SmartyCam HD overlays data from different sources on the videos themselves. From GPS: track map and vehicle position, as well as speed, lap and split times. From AiM logger connected to your ECU: RPM, throttle, engaged gear, acceleration, temperatures, pressures, and - in presence of additional sensors - also their values. All this info will be overlayed on videos in every single point of the track. SmartyCam HD uses the newest Race Studio 3, the powerful software which allows you to configure all details of your videos and to get plenty of fun and information out of them. You can configure your overlays in a virtually infinite variety of modes: add your logo and the track map, and choose your graphic objects from a list of pre-determined sets with the same layout or even single objects from different sets. Your videos will be "yours" in all details, from the data to their graphic layouts Video analysisThe video of a whole session once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap: so that you can simultaneously watch two of them and check where you were faster or slower. The same operation can be performed with any SmartyCam HD video recorded on the same track: you will be able to compare your best lap with your friends' personal best! A lens specifically designed for Motorsports must be robust, must be able to work when the engine rolls 100 times per second, and have good resolution and brightness. But above all a lens designed for motorsports must reduce distortion, which is a typical problem of lenses used by generic action-cameras: objects placed at ten meters' distance look very far, making it impossible to accurately determine whether the track is straight or curved. SmartyCam HD telecentric lens with six elements reduces distortion to the minimum and will withstand track vibrations for years. Moreover, the lenses with different HFOV's allow a tailor-made framing in all kinds of vehicles.

AiM Sports SmartyCam 3 Corsa   Introducing the upgraded SmartyCam 3 Corsa, the newest iteration of the SmartyCam HD. This enhanced version takes the well-known design to new heights, featuring an improved Global Shutter and the ability to capture video at up to 60 frames per second. Unlike conventional action cameras that cater to various extreme activities like skydiving or riding monstrous waves, the SmartyCam HD is meticulously crafted by dedicated motorsports enthusiasts who live and breathe the racetrack. Its narrow angle lens is specifically tailored for seamless mounting in sedans and sports cars, neatly fitting within the A-pillars for optimal placement.           Video format H.264 1,920x1,080 pixels @ 60 fps  Display resolution 128x128 pixels  Lens Low distortion camera lens  CMOS Sensor Global shutter  Field of view 67° or 84°  Internal battery Rechargeable lithium battery  External power 9-15 V  Supported MicroSD Card (not included) Up to 2 TB  Connectors 3 Binder 712 female connectors + 1 USB-C  Usage temperatures -10°C/+50°C  Auto Power ON Yes  Auto Power OFF Yes  Auto Start/Stop Recording Yes  Body Coated aluminum  Dimensions 102.2 x 63 x 46.5 mm  Weight 280 g, battery included  Waterproof IP65

AiM Sports SmartyCam 3 Corsa Data Logger Camera The new AiM SmartyCam 3 Corsa in both 67° and 84° takes everything we loved from the proven AiM SmartyCam 2.1 and upgrades the video to 1920x1080 FHD with 60 frames per second utilizing H.264 MPEG-4 protocol with 2TB of SD card capacity. AiM SmartyCam 3 Corsa Video Camera with Data Overlay Details: Manufacturer: AiM Manufacturer part number 67°: XS3CRFHD067L201 Manufacturer part number 84°: XS3CRFHD084L201 Cable included length: 4M  Cable included end #1: 5 pin 712 male Cable included end #2: 5 pin 712 male Cable connections on camera: 5 pin 712 female Weight: 200g Internal Battery: Yes External power input: 9-15 VDC Operating temperature: 14°F to 122°F SD card capacity: 2TB Audio: Internal microphone inside the camera housing Built-In ECU Bridge:The AiM SmartyCam engineers loaded the AiM SmartyCam 3 Corsa with features racers have requested for years, like a built-in ECU bridge. If you have a factory race car, BMW M4 GT4, Porsche Clubsport, GT3 Cup or Aston Martin Vantage GT4, you can now use your AiM SmartyCam Corsa stand alone and piggyback your ECU inputs. No external modules or additional wiring needed. Simple, non-invasive perfection.Automatic On/OffAiM SmartyCam 3 Corsa can be switched on/off automatically by the dash/logger it is connected to: simply decide after what period of non-activity the camera will have to switch-off. Both operations can also be carried out using the front facing buttons also, if you prefer.Recording can also be started/stopped automatically or via keyboard: the camera will start recording when the speed or RPM threshold is exceeded. You simply decide how long after dropping below the selected threshold the video will automatically stop. Straight Cut Dog Box/Solid Motor Mounts/Engine HarmonicsEngine rumble causes vibrations, which are not a good thing for video recording. Never again will you experience that seasick "wave effect" you get when watching videos recorded by a generic camera, when the car rolls at 7000 RPM. AiM SmartyCam 3 Corsa has been designed for that environment and for those vibrations. "Wave effect" is just a memory.Generic action cameras are designed to record videos in many different situations, such as skiing or surfing, but in motorsports they tend to record misleading videos. Those cameras straighten out the view ahead: when on track, the corners simply disappear. So, when you wish to check your track performance, those videos are useless, because the images are distorted. Being a camera dedicated to motorsports, AiM SmartyCam 3 Corsa features lenses specifically designed to avoid distortion. The camera is available in two versions: 67 ° & 84 ° Real Time Data OverlayWith no driver input, the AiM SmartyCam 3 Corsa will automatically overlay on your videos all the data you need: speed, RPM, lap number, gear shifts and much more. Simply choose the data and the graphic layout you prefer in the huge selection of overlays available. What Kind of Data?AiM SmartyCam 3 Corsa overlays data from different sources on the videos themselves.From GPS: track map and vehicle position, as well as speed, lap and split times.From Aim logger connected to your ECU: RPM, throttle, engaged gear, acceleration, temperatures, pressures and in the presence of additional sensors, also their values.All this info will be overlayed on videos in each single point of the track. Smarty Manager 3 SoftwareWith SmartyManager 3, AiM SmartyCam 3 Corsa dedicated software, you can add your logo and the track map on videos. The wide choice of graphic objects you can select allows you to choose from a list of pre-determined sets with the same layout or to choose single objects from different sets. Now, your videos will be truly “yours” in all details, from data to their graphic layouts.

AiM Sports SmartyCam 3 GP The all-NEW SmartyCam 3 GP camera has been designed for motorsport with a single purpose:To provide great videos and supply you with all the information you need.SmartyCam 3 GP camera overlays all the data from both GPS and AiM loggers connected to your ECU. Full HD camera system, Video output, CAN connection, USB-C connection, and GPS port are only a few of the features of SmartyCam 3 GP: the power of simplicity. Video format: H.264 1920x1080 pixels @ 60 FPS Display resolution: 2.4" 240 x 320 pixels Lens: Low distortion camera lens CMOS sensor: Global Shutter Field of view: 67°, 84° or 120° Internal battery: Rechargeable lithium battery Video Out: 3G-SDI External power: 9-15 Volt Supports SD card: Up to 2 TB Connectors: 2 Binder 712 female connectors + 2 SMA female connector (see pinout page) + 1 USB-C Usage temperatures: -10°C/+50°C Auto Power ON: Yes Auto Power OFF: Yes Auto Start/Stop Recording: Yes Body: Anodised Aluminium Dimensions: Main unit 120.8 x 80.2 x 30.9 mm | Bullet camera 24 diam x 46.0 mm (120° lens) | Bullet camera 24 diam x 41.0 mm (67°-84° lens Bullet Cable Length: From 0.5 m to 4 m (7 lengths available) Weight: Main Body - 320g, Bullet Camera - 45g Waterproof: IP65  

Garmin Catalyst Driving Performance Optimizer The Garmin Catalyst is a robust driver data and video system aimed at making driver improvement easier than ever before. Garmin has been the leader in GPS based active sport recording for decades, and now crosses over into the automotive performance data field with the Garmin Catalyst Driving Performance Optimizer. Garmin Catalyst Driving Performance Optimizer Details: Manufacturer: Garmin Manufacturer Part Number: 010-02345-00 Physical Dimensions: 7.84" x 4.79" x 0.93" Display Size: 6.0" x 3.5" Touch Screen: Yes Weight: 15.04 oz Battery: Rechargeable Lithium-Ion Battery Life (Claimed): Up to 2 hours Internal Memory: 16GB Expandable Memory: Yes; up to 256GB via dual SD card slots Includes SD card: Yes, includes 1 (one) 32GB MicroSD card Includes Mount: Yes GPS: Yes GLONASS: Yes 10Hz Multi-GNSS Positioning: Yes Garmin Connect Compatible: Yes Includes Remote Camera: Yes Camera Resolution: 1080p Camera Field of View: 140 Camera Frame Rate: 30 fps Software & Track Database Updates: Yes Bluetooth Connectivity: Yes, to car stereo or Bluetooth headset Tracks Your Racing Line: Yes Real-Time Audio Cues/Coaching: Yes True Optimal Lap w/ Video: Yes Built-In Accelerometers: Yes Displays Best Lap Time: Yes Displays Adaptive Delta Time: Yes Displays Lap Count & Total Session Time: Yes Preloaded Global Track Database: Yes Session Comparisons: Yes Driving Performance Scores: Yes Automatically Identifies Areas of Biggest Time Gain: Yes Supports Multiple Users: Yes Supports Multiple Cars: Yes Stores History of On-Track Performance: Yes Current Weather Plus Forecast via Wi-Fi: Yes Segment Analysis (Racing line, Speed, & Accel/Decel): Yes DISCOVER YOUR FULL TRACK DRIVING POTENTIAL This device is an industry-first, providing virtual coaching in real time and showing a calculated optimal lap. Real time coaching tells you how to go faster in each corner, with audio instructions, so you can keep your eyes up at all times. This is a stark contrast to existing systems which only provide feedback after a corner or after your session. The Catalyst uses your measured optimal lap to guide you to your personal maximum performance, rather than the performance of a professional racing driver. Overview:Garmin Catalyst uses accelerometers, GPS, video, and the most sophisticated algorithms to evaluate your driving performance and then suggest ways to improve (just like a human coach). Through the display and audio, Catalyst provides a real-time assessment of performance using both gentle suggestions and positive reinforcement. No, it won't clap when you get it right but it does use real-world phrases and encouragement - such as "brake less", "apex later", or "keep pushing". Catalyst is perpetually evaluating and assessing your performance so it can optimize your lap and get you in line. After your session, review track maps showing opportunities for improvement as well as "heat map" displays of deceleration, acceleration, apexes, and speeds. Display & Audio:Catalyst uses a 6.95" super wide view LCD IPS screen with vivid TFT colors. The LCD is a touchscreen, able to control functions without the need for a remote control, app, or a laptop. Coaching or playback audio is available via 3.5mm headphone jack or Bluetooth(TM) to your headset or car stereo. The on-screen layout is not programmable.CameraThis is more than just a camera - the remote pod includes the accelerometers. It records up to 30fps in 1080p HD in a 140 field-of-view. It must be mounted facing forward, high up, and centered on your windshield. An on-screen guide will help you align it. The camera contains the accelerometers and very powerful processing software integrates the video into Catalyst's coaching and data. Playback is available on the Catalyst screen with speed and lap times already in sync. Coaching:To unlock all of the coaching features and data you will need to select the Advanced setting. There is also a Basic setting that does not provide as much feedback. During your session, the real-time display is referencing current session data only. However, post-session review can include data from multiple sessions. Catalyst is looking for patterns in your driving to map out where you were fast and opportunities to try a different line, brake less, or carry more speed. The only voice currently available is a Siri-like female voice. Lap time differential is displayed as either red (slower), green (faster), or black (no change). From a student/novice perspective you may want to have an advanced driver/instructor set baselines in your car first. Then overlay that data with your own driving. This way Catalyst can see the full potential and make recommendations. It's important not to "chase" a lap time but to know what is capable and make incremental improvements to get there. Catalyst will never make a recommendation that hasn't been previously successful. Analysis & Review:Catalyst compiles all of its data to form a True Optimal Lap. This is your best possible lap using all of the data you provided in your sessions. True Optimal Lap is determined not just by lap and sector times but by analyzing your best lines through corners and sectors and using the camera feed to identify track limits. Catalyst retains your track data over a 4-day period so you can pack in a full weekend of driving with progressive coaching and analysis. Post-session data is reviewed through the screen or through the Garmin Connect(TM) smartphone app, including video. Export of data or video files to a laptop is not currently supported nor is it needed. Everything you need is self-contained in the tablet. Catalyst works best when used as a standalone tool to review performance and make adjustments while at the track. In the Box: Garmin Catalyst 32GB microSD pre-installed under covered compartment (auxiliary card slot on the side of the Catalyst device is externally accessible for memory expansion) Remote Cam with polarized lens cover Remote Cam 3.5 meter cable Heavy-duty vehicle suction cup Powered magnetic mount Two 1” connecting arms 1” arm connector Cable clips Socket power cable Documentation Included Accessories: One-inch ball adapter screw down mount USB data cable 12V bare wire vehicle power cable Additional Remote Cam adhesive Continue reading to see how and why the Garmin Catalyst Driving Performance Optimizer is unlike anything you've ever experienced. Heck... it's unlike anything you've ever even thought possible!

AiM Sports SmartyCam 3 Data Logger Camera The new AiM SmartyCam 3 Sport Sport takes AiM data system video to the next level. Specs include a resolution of 1920x1080 FHD with 60 frames per second utilizing H.264 (MPEG-4 Advanced Video Coding) to bring the best video quality of any AiM camera ever. Not a plastic "action-sports" camera, but a real motorsports camera built to the rigors that a race car demands. The AiM SmartyCam 3 Sport is the latest generation of the best in motorsports cameras. If you have an AIM dash and want to add great videos that include all the technical information that will help you improve your performance, the AiM SmartyCam Sport 3 is your answer. AiM SmartyCam 3 Sport Video Camera with Data Overlay Details: Manufacturer: AiM Manufacturer part number 67°: XS3S674U Manufacturer part number 84°:  XS3S844U Cable included length: 4M  Cable included end #1: 5 pin 712 male Cable included end #2: 5 pin 712 male Cable connection on camera: 5 pin 712 female Audio: Internal microphone inside the camera housing AiM SmartyCam 3 Sport Sport offers the ultimate in reliability and durability in the motorsports world. If you have an AIM dash or data logger and want to add great videos that include all the technical information that will help you improve your performance, the AiM SmartyCam 3 Sport Sport is the professional motorsports answer. Automatic On/Off AiM SmartyCam 3 Sport can be switched on/off automatically by the logger it is connected to: simply decide after what period of non-activity the camera will have to switch-off. Both operations can also be carried out using the keyboard, if you prefer. Recording can also be started/stopped automatically or via keyboard: the camera will start recording when the speed or RPM threshold is exceeded. You simply decide how long after dropping below the selected threshold the video will automatically stop. Straight Cut Dog Box/Solid Motor Mounts/Engine Harmonics Engine rumble causes vibrations, which are not a good thing for video recording. Never again will you experience that seasick "wave effect" you get when watching videos recorded by a generic camera, when the car rolls at 7000 RPM. AiM SmartyCam 3 Sport has been designed for that environment and for those vibrations. "Wave effect" is just a memory. Generic action cameras are designed to record videos in many different situations, such as skiing or surfing, but in motorsports they tend to record misleading videos. Those cameras straighten out the view ahead: when on track, the corners simply disappear. So, when you wish to check your track performance, those videos are useless, because the images are distorted. Being a camera dedicated to motorsports, AiM SmartyCam 3 Sport features lenses specifically designed to avoid distortion. The camera is available in two versions: 67 Degree & 84 Degree Real Time Data Overlay With no driver input, the AiM SmartyCam 3 Sport will automatically overlay on your videos all the data you need: speed, RPM, lap number, gear shifts and much more. Simply choose the data and the graphic layout you prefer in the huge selection of overlays available. What Kind of Data? AiM SmartyCam 3 Sport Sport overlays data from different sources on the videos themselves. From GPS: track map and vehicle position, as well as speed, lap and split times. From Aim logger connected to your ECU: RPM, throttle, engaged gear, acceleration, temperatures, pressures and in the presence of additional sensors, also their values. All these info will be overlayed on videos in each single point of the track. Smarty Manager 3 Software With SmartyManager 3, AiM SmartyCam 3 Sport dedicated software, you can add your logo and the track map on videos. The wide choice of graphic objects you can select allows you to choose from a list of pre-determined sets with the same layout or to choose single objects from different sets. Now, your videos will be truly “yours” in all details, from data to their graphic layouts.

Garmin Dash Cam 67w 16 GB Class 10 Micro SD Card Included! Want to record your track sessions without the fuss of setting up a full data acquistion system and/or lap timer? If so, the Garmin Dash Cam 67w may be the solution you're looking for. That fact that it's also helpful for daily driving is a bonus, but that's not why you're shopping at Discovery Parts after all. You're probably wondering if you can record your sessions easily. To answer that question, here's a direct quote from the Garmin Product Strategy Manager we spoke to: "Yes! The user will be able to upload all the footage from the SD card to the Drive app. They just need to make sure that they prompt the dash cam to upload the footage so the camera doesn't automatically record over it." So there you have it! Garmin technology and simplicity in an unobtrusive package to capture your laps quickly and easily. IN THE BOX: Garmin Dash Cam 67w Pre-installed 16 GB microSD card Low profile adhesive/magnetic mount Vehicle power cables Dual USB power adapter Documentation

Garmin Dash Cam 57w 16 GB Class 10 Micro SD Card Included! Want to record your track sessions without the fuss of setting up a full data acquistion system and/or lap timer? If so, the Garmin Dash Cam 57w may be the solution you're looking for. That fact that it's also helpful for daily driving is a bonus, but that's not why you're shopping at Discovery Parts after all. You're probably wondering if you can record your sessions easily. To answer that question, here's a direct quote from the Garmin Product Strategy Manager we spoke to: "Yes! The user will be able to upload all the footage from the SD card to the Drive app. They just need to make sure that they prompt the dash cam to upload the footage so the camera doesn't automatically record over it." So there you have it! Garmin technology and simplicity in an unobtrusive package to capture your laps quickly and easily. IN THE BOX Garmin Dash Cam 57w Pre-installed 16 GB microSD card Low profile adhesive/magnetic mount Vehicle power cables Dual USB power adapter Documentation

AiM Sports SmartyCam GP HD Base Mount Kit This strong, adjustable mount holds your AiM Sports SmartyCam GP HD base unit securely to your roll bar or harness bar. Two pivoting ball joints give you lots of adjustment while keeping it safe and secure during races and track days while the V-shaped base and two different size hose clamps fit a wide range of tubing sizes, from 1" to 2" OD. The rectangular base adapter provides a stable, bolt-on base for secure mounting of the SmartyCam GP base. The wide range of adjustment lets you aim the viewing screen in just about any direction. Includes V-base with ball, double clamp arm, top ball with 2-bolt diamond mounting flange, rectangular mount base adapter, 2 hose clamps, and rubber isolator strap.

AiM Sports SmartyCam GP HD Roll Bar Mount This strong, adjustable mount holds your AiM SmartyCam GP HD bullet camera securely to your roll bar or harness bar. Two pivoting ball joints give you lots of adjustment, keeping it pointed in the right direction during races and track days. The cast aluminum base and stainless steel clamp create a solid base for this heavy-duty mount. INCLUDED IN THE PACKAGE: Cast aluminum lower mount Jubilee clamp 60mm single clamp arm Ball head with 1/4-20 threaded stud Ridged lock washer

AiM Sports SmartyCam HD Roll Bar Mount Kit This adjustable mount holds your AiM SmartyCam HD Rev 2.1 securely to your roll bar or harness bar. Allows you to quickly, securely mount your camera and keeping it pointed in the right direction during track days and other racing events. Two pivoting ball joints allow a wide range of adjustment and cast aluminum base mounts incredibly securely. KIT INCLUDES: Cast aluminum lower mount Jubilee clamp 60mm single clamp arm Ball head with 1/4-20 threaded stud Ridged washer

AiM SmartyCam GP HD Suction Mount This adjustable mount holds your AiM SmartyCam GP HD Rev 2.2 securely to your windshield, allowing you to quickly mount your camera and keep it pointed in the right direction during races, track days, and other driving events. Two pivoting ball joints allow a wide range of adjustment, and the 3 1/2" diameter lever-actuated suction cup base works on any smooth, clean, flat surface. The machined aluminum collar accepts a lipstick-type camera measuring 24mm (0.94") OD. You can also eliminate the collar to mount a lightweight, compact camera with a standard 1/4-20 tripod mount (including SmartyCam and SmartyCam HD). KIT INCLUDES: Suction cup base Lower ball clamp 60mm clamp arm Top ball with 1/4-20 mounting stud Machined collar

AiM SmartyCam HD Suction Mount This adjustable mount holds your AiM SmartyCam HD Rev 2.1 securely to your windshield or any other smooth, flat surface. Allows you to quickly mount your camera and keeping it pointed in the right direction during track days and other racing events. Two pivoting ball joints allow a wide range of adjustment and the 3 1/2" diameter, lever-actuated suction cup base mounts incredibly securely. KIT INCLUDES: Suction cup Clamp base with ball (screws provided) 60mm single clamp arm Ball head with 1/4-20 threaded stud Ridged washer