Longacre
Allstar SFI 45.1 Hi-Density Bar Padding - 3' Black
$39.99
Allstar SFI 45.1 Hi-Density Bar Padding - 3' Black
ChampCar legal SFI 45.1 roll bar padding providing maximum flame retardation and energy absorption. Constructed from hi-density fire resistant materials, you have the impact protection you need and the fire protection you hope you never need.
Allstar SFI 45.1 Hi-Density Bar Padding - 3' Black Details:
Manufacturer: Allstar
Manufacturer part number: 14112
Required in NHRA, SCCA, NASCAR, Grand-Am, PWC, NASA, BMWCCA, ChampCar, PCA and more.
Rating meets SFI spec 45.1
Provides maximum in energy absorption and flame retardation
Will not drip or melt in fire
Fits bars from 1-1/4" to 1-3/4"
36" length, pre-taped adhesive
For perfect corners use a hack saw and a miter box
#1 Seller in Roll Bar Padding
Allstar SFI 45.1 roll bar padding won't melt or drip in a fire and is our #1 seller in roll-bar padding.
CMS Performance
CMS Performance Harness Install Kit For C7 Corvette
from $125.00
CMS Performance Harness Install Kit For C7 Corvette
This Product Fits The Following Cars:
Chevrolet Corvette Stingray & Z51, C7 (2014-2019)
Chevrolet Corvette Z06, C7 (2015-2019)
Quick and Easy Installation of Harness Lap Belts in the C7 Corvette
The CMS Performance Harness Install Kit for the C7 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C7 Corvette.
Each CMS Performance C7 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor.
CMS Performance is 100% Designed and Built in the USA
All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C7 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions.
For the C7 Corvette, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C7 Corvette without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price!
CMS Performance Harness Install Kit Details:
Manufacturer: CMS Performance
manufacturer Part: Harninstall-C7
Construction: 360o TIG welded stainless steel
Finish: Satin black powder coat
Designed, manufactured, and powder coated by CMS Performance in the USA
This product is intended for off-road use only.
CMS Performance
CMS Performance Harness Install Kit For C8 Corvette
from $125.00
CMS Performance Harness Install Kit For C8 Corvette
This Product Fits The Following Cars:
Chevrolet Corvette Stingray & Z51, C8 (2020+)
Chevrolet Corvette Z06, C8 (2023+)
Quick and Easy Installation of Harness Lap Belts in the C8 Corvette
The CMS Performance Harness Install Kit for the C8 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C8 Corvette. The kit is typically used along with the CMS Performance C8 Harness Bar or Deluxe C8 Harness Bar. Together they give C8 Corvette driving enthusiasts an elegant, secure way to use a racing harness.
Each CMS Performance C8 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits now, you save $25 and you can install a harness for your passenger or instructor.
CMS Performance is 100% Designed and Built in the USA
All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C8 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions.
For the C8 Corvette, we recommend the Schroth Profi II ASM Harness for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C8 Corvette that don't have a pass-through in the seat cushions to accommodate the sub straps of a six-point racing harness.
CMS Performance Harness Install Kit Details:
Manufacturer: CMS Performance
manufacturer Part: Harninstall-C8
Construction: 360o TIG welded stainless steel
Finish: Satin black powder coat
Designed, built, and powder coated in the USA
This product is intended for off-road use only.
CMS Performance
CMS Performance Harness Install Kit For Gen 6 Camaro
from $125.00
CMS Performance Harness Install Kit For Gen 6 Camaro
This Product Fits The Following Cars:
Chevrolet Camaro Coupe, all (2016+)
Quick, Easy Installation of Harness Lap Belts in the Gen 6 Camaro
The CMS Performance Harness Install Kit for the Gen 6 Camaro provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your Gen 6 Camaro.
Each CMS Performance Gen 6 Camaro Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor.
CMS Performance is 100% Designed and Built in the USA
All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance Gen 6 Camaro Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions.
For the Gen 6 Camaro, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the Gen 6 Camaro without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price!
CMS Performance Harness Install Kit Details:
Manufacturer: CMS Performance
manufacturer Part: Harninstall-G6C
Construction: 360o TIG welded stainless steel
Finish: Satin black powder coat
Designed, manufactured, and powder coated by CMS Performance in the USA
This product is intended for off-road use only.
CMS Performance
CMS Performance Rear Seat Delete BMW F87 M2
$399.00
Rear Seat Delete for BMW F87 M2
Complete your CMS Performance roll bar installation with this custom-made rear seat delete kit for the BMW F87 M2.
Made from high-strength ABS plastic and upholstered to match the look of your BMW M2 interior. Set includes seat back and two seat-bottom replacement panels.
CMS Performance
CMS Performance Rear Seat Delete BMW G87 M2
$399.00
Rear Seat Delete for BMW G87 M2
Complete your CMS Performance roll bar installation with this custom-made rear seat delete kit for the BMW G87 M2.
Made from high-strength ABS plastic and upholstered to match the look of your BMW G87 M2 interior. Set includes seat back, two seat-bottom replacement panels, brackets and plastic push fasteners.
CMS Performance
CMS Performance Sub Strap + Lap Belt Mount for BMW
from $145.00
CMS Performance Sub Strap + Lap Belt Mount for BMW
This Mount Fits All Sub-Models Of Current BMW Cars
The Best Way to Mount Harness Lap and Sub Belts in Your BMW
The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory BMW seats, giving you strong, secure mounting points for your racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original BMW mounting bolts.
CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace.
The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA.
CMS Performance Sub Strap + Lap Belt Mount for BMW Details:
Manufacturer: CMS Performance
Manufacturer part no.: CMSP-SS-BLACK-BMW
Construction: TIG-welded solid carbon steel
Finish: satin black powder-coat
Fitment: fits driver or passenger seat
Allows full fore/aft and up/down seat adjustment
Does not interfere with OEM seat belts or airbag hardware
CMS Performance
CMS Performance Sub Strap + Lap Belt Mount for Mustang GT350/GT350R/S550
from $145.00
CMS Performance Sub Strap + Lap Belt Mount for GT350/GT350R/S550
This Mount Fits All Variants of the Following Cars:
Ford Performance Shelby GT350 (2015-2020)
Ford Performance Shelby GT350R (2016-2020)
Ford Performance Shelby GT500 (2021+)
Ford S550 Mustang GT (2015-2023)
The Best Way to Mount Harness Lap and Sub Belts in Your Shelby Mustang
The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Ford Performance seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original Ford mounting bolts.
CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace.
The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA.
CMS Performance Sub Strap + Lap Belt Mount Details:
Manufacturer: CMS Performance
Manufacturer part no.: CMS-SL-003
Construction: TIG-welded solid carbon steel
Finish: satin black powder-coat
Fitment: fits driver or passenger seat
Allows full fore/aft and up/down seat adjustment
Does not interfere with OEM seat belts or airbag hardware
CMS Performance
CMS Performance Sub Strap + Lap Belt Mount for Toyota GR Supra/GR86
from $145.00
CMS Performance Sub Strap + Lap Belt Mount for Toyota GR Supra/GR86
This Mount Fits All Variants of the Following Cars:
Toyota GR Supra A90/A91 (2019+)
Toyota GR86 (2021+)
The Best Way to Mount Harness Lap and Sub Belts in Your GR Supra or GR86
The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Toyota seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original seat mounting bolts.
CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace.
The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA.
CMS Performance Sub Strap + Lap Belt Mount Details:
Manufacturer: CMS Performance
Manufacturer part no.: CMS-SL-005
Construction: TIG-welded solid carbon steel
Finish: satin black powder-coat
Fitment: fits driver or passenger seat
Allows full fore/aft and up/down seat adjustment
Does not interfere with OEM seat belts or airbag hardware
CMS Performance
CMS Performance Sub Strap Mount for C8 Corvette
from $145.00
CMS Performance Sub Strap Mount for Corvette C8
This Mount Fits All Variants of the Following Cars:
Chevrolet Corvette C8
Chevrolet Corvette C8 Z51
Chevrolet Corvette C8 Z06
Chevrolet Corvette C8 ZR-1
The Best Way to Mount Harness Lap and Sub Belts in Your C8 Corvette
The CMS Performance Sub Strap Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for racing harness sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts.
CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap Mount provides an extremely strong structure to which you can wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace.
The CMS Performance Sub Strap Mount is designed, manufactured, and powder-coated entirely in-house in the USA.
CMS Performance Sub Strap Mount Details
Manufacturer: CMS Performance
Manufacturer Part Number: Harninstall-C8
Construction: TIG-welded solid carbon steel
Finish: satin black powder-coat
Fitment: fits driver or passenger seat
Allows full fore/aft and up/down seat adjustment
Does not interfere with OEM seat belts or airbag hardware
CMS Performance
CMS Performance Sub Strap Mount for Porsche 992-991-981-718
from $195.00
Sub Strap Mount for Porsche LWB
For cars with Porsche OEM CFRP Full Bucket ("Lightweight Bucket" or "LWB") Seats Only.
FITMENT:
992 GT3/GT3RS
991.1 & .2 GT3/GT3RS
992 GT3/GT3RS
991.2 GT2RS
981 Cayman GT4
718 Cayman GT4
The Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five-, six-, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Lighweight Bucket Seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base.
The Performance Sub Strap Mount fits either driver- or passenger-side seats.
Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA. Made of solid steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. The Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety.
FEATURES:
Solid steel construction for maximum safety
Allows full fore/aft and up/down seat adjustment
Powder-coated to match OEM seat base
Fits driver or passenger seat (Porsche LWB only)
Simple to install
Compatible with OEM seat belt and airbag hardware
CMS Performance
CMS Performance Sub Strap Mount for Porsche Carbon Bucket Seat
from $195.00
CMS Performance Sub Strap Mount for Porsche Lightweight Carbon Bucket Seats
This Product Fits the Following Cars:
992 GT3/GT3RS
991.1 & 991.2 GT3/GT3RS
991.2 GT2RS
981 Cayman GT4
718 Cayman GT4
718 Cayman GT4RS
The Best Way to Install Sub Straps in your Porsche
The CMS Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five-, six-, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Light Weight Bucket seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the CMS Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base.
The CMS Performance Sub Strap Mount fits the driver- and/or passenger-side seats.
Born In The USA
CMS Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA. Made of solid carbon steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. CMS Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety.
CMS Performance Sub Strap Mount Details:
Solid steel construction for maximum safety
Allows full fore/aft and up/down seat adjustment
Powder-coated satin black standard; several Porsche colors available in the drop-down above!
Fits driver or passenger seat (Porsche LWB only)
Simple to install
Compatible with OEM seat belt and airbag hardware
Competition Motorsport
CMS Rollbar Harness Collars
$24.95
Harness Belt Roll Bar Guide Clamp
Keep your shoulder belts or head containment net straps in place with our heavy duty but lightweight aluminum 2 piece harness guide clamp that fits 1.5" and 1.75" roll bars perfectly.
Harness Belt Roll Bar Guide Clamp Details:
Manufacturer: DiscoveryParts
Manufacturer part number 1.5": RB-COLLAR-AL15-BLK
Manufacturer part number: 1.75": RB-COLLAR-AL175-BLK
Material: Steel
Finish: Black oxide
Keeps your belts or cage nets in place, assisting in protection in a multiple impact.
2 Piece design makes installation easy
Assists in perfect belt geometry
Smooth radius on all edges so no scrapes or cuts when working in the area
Sold in qty one each
Perfectly sized to fit all roll bars with either 1.75" or 1.50" harness cross-bars. Precision-machined roll bar harness collars help keep your harness shoulder straps in exactly the right place on your roll bar. Easy to install double-split collars with high-strength Allen bolt hardware, they are available in satin black powder-coated aluminum.