Radio Headsets

Speedcom Single Ear Headset The Speedcom SCC-SEIH single-ear intercom headset connects to all Speedcom intercom units and features a built-in IMSA (4C) male connector for simple, reliable driver-to-passenger communications. SPEEDCOM SCC-SEIH SINGLE EAR HEADSET DETAILS Manufacturer: Speedcom Manufacturer part no: SCC-SEIH Flex boom length (including mic): 18cm (7.1 in.) Cable length: 1.1m (3 ft. 9 in.) Cable connector: IMSA 4C, male COMPACT AND COMFORTABLE EARPIECE The actual speaker portion of the Speedcom SCC-SEIH Single Ear Intercom Headset is quite small. Measuring approximately 3.5cm in diameter and 2.0cm thick including the pillow pad. This pad compresses easily with the right amount of give for comfort. FLEX BOOM MICROPHONE Attached to the speaker is a flex boom noise cancelling microphone. The flexible portion of the boom is 14cm long and the mini microphone adds 4cm, making it 18cm (7.1 in.) long in total to easily reach the user's mouth. The compact size works in every helmet we've tried it in. ROBUST WIRING MEANS LONGEVITY AND RELIABILITY Why do students pull the earpiece out by the wire? That's a question for the ages, perhaps. Recognizing this, Speedcom changed how headsets are built by making the SCC-2MPI with a built-in molded plug. Other brands use the two plastic earpiece halves to hold the cable, but Speedcom uses cabling that has a security block built in during the manufacturing stage, so you can pull on it all you want. Is this a more expensive way to build a headset? Yes. Is it the better way to build a headset? Also yes. Using the popular IMSA wiring protocol, the cable is 1.1m (3 ft. 9 in.) long, easily reaching a communication unit that's dash-mounted unit, shoved next to the seat of a D.E. car, or in the instructor's hand.

Racing Radio Foam Ear Buds - Universal Foam Driver Earpieces By Racing Radios. Designed with Ultra High Noise Transducers. Plugs directly into Driver Helmet with 3.5mm jack and has a 19" wiring lead. This is the industry standard foam earpiece used by Racing Radios for over 30 years. Racing Radio Foam Ear Buds Details: Manufacturer: Racing Radios Manufacturer part number: CE31/A-FOAMS Helmet connection: Universal 3.5mm Foam Tipped: Yes Wiring Length: 19" Entry level or Pro: Pro If we look closer at a Racing Radios earpiece, we notice there are quite a few differences. First, the outer foam piece is softer and closer to a smooth/soft material than the harder foam material used by lesser manufacturers. After a year of racing the foam was still soft, but starting to look pretty nasty, so upon trying to remove the foam I noticed that there is a micro drop of glue on the end of the wire to transducer that locked it to the foam earpiece. To remove the foam, I used a new razor blade and cut the foam like a banana and peeled the old foam out of the way. There I could inspect the perfect micro soldering on what is one of the words smallest (transducers) speaker not used for Top Secret surveillance. To install the new foam covers, I use a pair of tweezers to stretch the hole open for 30 seconds and before the hole closes I slide the mini-transducer into the new foam, keeping the end of the sound tube barely covered by the end of the foam. I put a 1/2 a drop of super glue on the wire to foam area and I am done. Racing Radios is considered the go to for Professional Teams of all series and their quality is second to none. Racing Radios foam earpieces are not the cheapest on the web, but they are the best on the web. Trust Racing Radios for the best in race car driver communication.  

Racing Radios Two-Way Headset Premium The new Racing Radios Premium Two-Way Radio Headset features a flex boom noise-canceling microphone, premium comfort ear gels and an incorporated scanner jack on the left ear-cup that enables you to plug an additional audio source. Built for professionals with high-quality components for maximum reliability and durability. Racing Radios Two-Way Headset Premium Details: Manufacturer: Racing Radios Manufacturer part number: RRH-085-H Color: Blue Premium Flex Boom Noise-canceling Microphone Premium Comfort Gel Ear Seals Behind the head fit for maximum ear seal and noise reduction Push-to-talk on the left ear cup 5-Pin Cable Connector on Right Ear Cup Built-in scanner port on left ear-cup to plug in a scanner for a 2nd audio feed. (Headset cable for radio not included) [img-13765-left-large_default]

Racing Radio Foam Ear Buds European RCA Male Plug Foam driver earpieces for European "RCA" style helmet connection. In the USA we use a male 3.5mm connector to connect to our earbud jack, but in many European series the wiring protocol is based on the RCA style connection. Racing Radios RR-CE31-A/FOAMS-RCA has a 19" wiring lead and industry standard foam earpiece used by Racing Radios for over 30 years. Racing Radio Foam Ear Buds Details: Manufacturer: Racing Radios Manufacturer part number: CE31/A-FOAMS-RCA Helmet connection: European RCA Male Foam Tipped: Yes Wiring Length: 19" Entry level or Pro: European Pro This is a very special item only used in European racing series and wil not work with US radio components. If we look closer at a Racing Radios earpiece, we notice there are quite a few differences. First, the outer foam piece is softer and closer to a smooth/soft material than the harder foam material used by lesser manufacturers. After a year of racing the foam was still soft, but starting to look pretty nasty, so upon trying to remove the foam I noticed that there is a micro drop of glue on the end of the wire to transducer that locked it to the foam earpiece. To remove the foam, I used a new razor blade and cut the foam like a banana and peeled the old foam out of the way. There I could inspect the perfect micro soldering on what is one of the words smallest (transducers) speaker not used for Top Secret surveillance. To install the new foam covers, I use a pair of tweezers to stretch the hole open for 30 seconds and before the hole closes I slide the mini-transducer into the new foam, keeping the end of the sound tube barely covered by the end of the foam. I put a 1/2 a drop of super glue on the wire to foam area and I am done. Racing Radios is considered the go to for Professional Teams of all series and their quality is second to none. Racing Radios foam earpieces are not the cheapest on the web, but they are the best on the web. Trust Racing Radios for the best in race car driver communication.

Motorola Acoustic Tube In-Ear Surveillance Kit Acoustic Tube In-Ear Surveillance Kit connects to your Motorola hand held radio and allows complete communication (transmit and receive) with one piece. Listening to requests from crew members and driver coaches who want the smallest/simplest/rugged communications piece, the Pryme Motorola Acoustic Tube In-Ear Surveillance Kit V2 is the answer.. Working from the Motorola Handheld Radio, the harness splits to a mini-snap action push to talk (PTT) and also goes to your earpiece. The single earpiece is a single wire acoustic tube that fits left or right ears. A miniature lapel microphone has a small metal clip for easy positioning. Motorola Acoustic Tube In-Ear Surveillance Kit Details: Manufacturer part number: SPM-2503 Easy and convenient to use. Single wire acoustic tube for left or right ear compatibility. Designed for left or right ear use. Small lapel PTT with inline PTT/ Mic and metal clip. Fits Motorola Two-Pin Style Radios Entry level or Pro: Pro

Racing Radios Peltor Two-Way Headset Racing Radios takes the famous and popular Pro level headset, the Peltor 97042-PEL-6 and adds communication for the highest level of professional racing. Racing Radios Peltor headset line offers customers the same great reliability and functionality as our classic headsets. Racing Radios Peltor Two-Way Headset Details: Manufacturer: Racing Radios Manufacturer part number: RRH-17PEL Behind The Head Fitment -30db Foam Ear Seals Noise Cancelling Microphone Racing Radios Most Popular Pro Headset Designed around the Peltor 97042-PEL-6C hearing protection cup, these two-way headsets have a noise reduction rating of 30db. We ve also outfitted this headset with the Mini flexible driver microphone to allow additional noise cancellation as well as higher quality voice audio while transmitting [img-9996-left-large_default]

Racing Radios Two-Way Headset with Over the Head Strap The Racing Radios classic styled over-the-head headset is reversible, so your microphone can cross over your left or right cheek. The single over the head style is perfect for crew chiefs that prefer not having the dual strap system (one on top and also across the back). Racing Radios Two-Way Classic Headset Details: Manufacturer: Racing Radios Manufacturer part number: RRH158 5 pin cable connection Additional audio input (3.5mm) jack Push-To-Talk Switch PTT on Earcup Noise-canceling adjustable microphone Mounted on one of the earcups is a 3.5mm female jack for listen only through your ear cup speakers. This is most commonly used as a scanner in addition to your primary vehicle communications.

Racing Radios Peltor Two-Way Headset Racing Radios takes the famous and popular Pro level headset, the Peltor X5A 31db reduction headset and adds communication for the highest level of professional racing. Racing Radios Peltor headset line offers customers the same great reliability and functionality as our classic headsets. Designed around the Peltor RRH15PEL hearing protection cup, these two-way headsets have a noise reduction rating of 31db. We ve also outfitted this headset with the Mini flexible driver microphone to allow additional noise cancellation as well as higher quality voice audio while transmitting Racing Radios Peltor Two-Way Headset Details: Manufacturer: Racing Radios Manufacturer part number: RRH-15PEL Behind The Head Fitment -31db Foam Ear Seals Noise Cancelling Microphone [img-9997-left-large_default]