AP Racing
AP Racing by Essex Front Brake Kit (380mm) for F87 BMW M2 (All), F80 M3, F82 M4
$4,999.99
Complete AP Racing Front Road Brake Kit
F87 BMW M2/M2 Competition/M2 CS, F80 M3, F82 M4
Saves approximately 10 unsprung lbs. vs. M2 Competition front brakes
Painted calipers with dust boots add durability in inclement weather conditions
Low noise, vibration, and harshness for a very OE-like experience during daily driving
Huge 380x36mm, 72 vane AP Racing J Hook, fully-floating 2-piece discs
Leverages six piston AP Racing CP9562 World Radi-CAL II calipers with a red, black, or silver painted finish
Utilizes large volume brake pads for heat absorption and longevity
Pistons sized properly to maintain brake bias and work with the OEM master cylinder and ABS system
Designed to mate with OEM rear brakes or our matching rear AP Racing Road Brake Kit
This AP Racing Road Brake Kit Includes:
One pair of AP Racing CP9562 World Radi-CAL II six-piston calipers
One pair of 380mm x 36mm, 72-vane AP Racing CP7177 J-Hook rotors with fully floating 6061 hard anodized aluminum hats and attachment hardware
One pair of caliper mounting brackets and hardware
One pair of Spiegler stainless steel brake lines with abrasion-resistant coating
One set of Ferodo DS2500 brake pads
Detailed installation instructions
AP Racing
AP Racing by Essex Rear Brake Kit (380mm) for F87 BMW M2, F80 M3, F82 M4
$4,799.99
AP Racing Rear Big Brake Kit
F87 BMW M2, M2 Competition, M2 CS, F80 M3, F82 M4
Saves several unsprung lbs. vs. the OEM rear brakes
Retains full function of OEM parking brake
Painted calipers with dust boots add durability in the most punishing driving conditions
Low noise, vibration, and harshness for a very OEM-like experience during daily driving
Features the game-changing AP Racing Radi-CAL II fixed calipers with a red, black, or silver painted finish
Huge 380mm AP Racing J-Hook, fully-floating two-piece discs
Caliper pistons sized properly to maintain proper brake bias and work with the OEM BMW master cylinder and ABS system
Designed to mate with this front AP Racing Big Brake Kit
AP Racing Rear Big Brake Kit Includes:
One pair of AP Racing CP9541 World Radi-CAL II four-piston fixed calipers
One pair of 380mm x 28mm 72-vane AP Racing CP5914 J-Hook discs with fully floating 6061 hard anodized aluminum hats and attachment hardware
One pair of caliper mounting brackets and hardware
One pair of Spiegler stainless steel brake lines with abrasion-resistant coating
One set of Ferodo DS2500 brake pads
Detailed installation instructions
AP Racing
AP Racing by Essex Sprint Front Brake Kit (299mm) for Subaru BRZ/Toyota GR86 (2022+)
$2,499.00
Complete AP Racing Front Brake Kit for Sprint Races
For the Subaru BRZ & Toyota GR86 (2022+)
Newly designed caliper brackets and rotors accommodate the 2022+ BRZ aluminum spindles (old Gen 1 kits will not fit the Gen 2 cars)
Clears Gen 2 (2022 and up) 17- and 18-inch wheels without need for spacers
Features AP Racing CP8350 four-piston fixed calipers
299mm x 32mm 60-vane AP Racing two-piece floating rotors
Saves 20 lbs. of unsprung weight from the nose of vs. OEM brakes
Every component is designed to resist the heat of extended lapping on the race track
Pistons are sized to allow for seamless integration with the OEM master cylinder and ABS system
Designed to work with OEM rear brakes
AP Racing
AP Racing by Essex Endurance Front Brake Kit (325mm) for Subaru BRZ/Scion FR-S/Toyota GT86/GR86 (2013+)
$3,099.00
Complete Front AP Racing Competition Endurance Brake Kit
Subaru BRZ, Scion FR-S, or Toyota GT86/GR86 (2013+)
Clears Gen 2 (2022 and up) 17- and 18-inch wheels without need for a spacer
Features AP Racing CP8350 four-piston calipers
325mm x32 mm, 70 vane AP Racing two-piece floating rotors
Saves approximately 10 lbs. of unsprung weight from nose vs. OEM brakes
Every component is designed to resist the heat of extended racing stints
Pistons are sized to allow for seamless integration with OEM master cylinder and ABS system
Designed to work with OEM rear brakes
Brake Pads That Fit These Calipers:
Carbotech CTW7420
Ferodo FRP3097 D50
PFC 7751.xx.20
Brembo
Brembo Brakes 320x28 Front 2-Piece Rotors & Four Piston Calipers
$3,095.00
For Drivers Who Demand the Utmost From Their Car
Designed and tested specifically for track day enthusiasts as well as drivers who demand the highest performance from their cars, the Brembo 320x20 Two-Piece Floating Rotor and Four Piston Caliper kit offers superlative performance for both daily driving and demanding track day sessions.
Brembo kit consists of cross-drilled or slotted, ventilated, two-piece floating brake discs and aluminum calipers with 4 pistons; a complete set of high performance Brembo brake pads; metal-braided hoses; and high quality hardware.
Brembo Brakes Kit Details:
Fitment: FRONT
Rotor hat material: aluminum
Rotor ring material: cast iron
Rotor type: cross-drilled or slotted, two-piece floating
Rotor size: 320mm D x 28mm W
Caliper: two-piece aluminum, fixed mount, four piston
Braided hoses: INCLUDED
Hardware: INCLUDED
Solutions and Technologies Born on the Race Track
Brembo braking systems consist of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.
The kit consists of fixed aluminum calipers with four opposed pistons combined with cross-drilled or slotted two-piece discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each car model.
The heart of the kit consists of aluminum Brembo calipers, machined from cast aluminum to ensure outstanding rigidity and minimized deflection under hard braking loads. The two-piece discs supplied in the kit feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.
Cross-drilled and slotted rotor finishes are designed and executed with meticulous precision. These holes in the braking surface help dissipate heat, eliminate brake dust, and evacuate gases. A set of high-performance brake pads with specific friction materials for each application, TüV/DOT homologated metal-braided hoses, an adapter, and high-quality fastener hardware complete the kit.
More Braking Torque and Thermal Capacity On Track
Using radial-mounted fixed calipers together with oversized, two-piece floating discs gives your braking system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use.
Fixed calipers improve the durability and efficiency of the system: the four opposed pistons act on the pads with more precision due to the smaller piston diameter and the reduced pressure exerted on each individual piston compared to typical single-piston floating calipers. The greater overall contact area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses result in improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel.
Rotor cross-drilling, together with the greater dimensions of the disc surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track.
Brembo Says You Mean Business
With a combination of painted calipers (available in red or black) flaunting the Brembo logo and cross-drilled discs, this Brembo Brakes kit gives your car an unmistakably sporty, eye-catching look, offering that extra touch for drivers who want their vehicle to stand out from the crowd.
Brembo
Brembo Brakes 320x28 Front Rotors & Four Piston Calipers
$1,995.00
For Drivers Who Demand the Utmost From Their Car
Designed and tested specifically for track day enthusiasts as well as drivers who demand the highest performance from their cars, the Brembo 320x20 Rotor and Four Piston Caliper kit offers superlative performance for both daily driving and demanding track day sessions.
Brembo kit consists of cross-drilled, ventilated, one-piece brake discs and aluminium calipers with 4 pistons; a complete set of high performance Brembo brake pads; metal-braided hoses; and high quality hardware.
Brembo Brakes Kit Details:
Fitment: FRONT
Rotor material: Cast iron
Rotor type: cross-drilled, single piece
Rotor size: 320mm D x 28mm W
Caliper: two-piece aluminum, fixed mount, four piston
Braided hoses: INCLUDED
Hardware: INCLUDED
Solutions and Technologies Born on the Race Track
Brembo braking systems consist of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.
The kit consists of fixed aluminium calipers with four opposed pistons combined with cross-drilled one-piece discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each car model.
The heart of the kit consists of aluminium Brembo calipers, machined from a single billet of cast aluminium that ensures outstanding rigidity and minimized deflection under hard braking loads. The one-piece discs supplied in the kit feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.
Cross-drilled finishes are designed and executed with meticulous precision. These holes in the braking surface help dissipate heat, eliminate brake dust, and evacuate gases. A set of high-performance brake pads with specific friction materials for each application, TüV/DOT homologated metal-braided hoses, an adapter, and high-quality fastener hardware complete the kit.
More Braking Torque and Thermal Capacity On Track
Using radial-mounted fixed calipers together with oversized discs gives your braking system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use.
Fixed calipers improve the durability and efficiency of the system: the four opposed pistons act on the pads with more precision due to the smaller piston diameter and the reduced pressure exerted on each individual piston compared to typical single-piston floating calipers. The greater overall contact area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses result in improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel.
Rotor cross-drilling, together with the greater dimensions of the disc surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track.
Brembo Says You Mean Business
With a combination of painted calipers (available in red or black) flaunting the Brembo logo and cross-drilled discs, this Brembo Brakes kit gives your car an unmistakably sporty, eye-catching look, offering that extra touch for drivers who want their vehicle to stand out from the crowd.