AiM 5 Pin 712 to 7 Pin 712 Cable for SmartyCam HD 2.1 to Solo DL, MXS, MXG & MXL2 - 2 Meter

The AiM V02566070 CAN cables have a male 5-pin 712 (screw-in) connector and a 7-pin 712 (screw-in) connector to connect the AiM SmartyCam HD 2.1 (version 2.1 black box looking camera) to your Solo DL, MXS, MXG, MXL2 in the shorter 2 meter length. This cable also is used to connect your AiM SmartyCam HD (version 1) to your AiM logger or SMC Bridge.

AiM 5 Pin 712 to 5 Pin 712 Cable Details:

• Manufacturer: AiM
• Manufacturer part number: V02566070
• Alternate part number: AIM-MC-267
• SmartyCam HD 2.1 to Solo DL, Mychron 5, MXS, MXP, MXG, MXL2 sync cable
• Included with all SmartyCam HD kits
• Length: 2 Meters (6ft)

Note: Not compatible with the original SmartyCam (gray unit with the viewing screen on top) or the later SmartyCam HD "Rev 1". The version 1 can be identified by a 7/8" diameter lens with either a 67 or 87 degree field of view, and a viewfinder flush with the front of the housing. Later SmartyCam HD Rev 2 had a larger 1 3/8" OD lens marked as 60 or 120 degree field of view and a cover over the front viewfinder held on by 8 screws.