AiM Cables For Your Racing Needs.

AiM Cables

AiM Cables For Your Racing Needs. Racing demands the best in connections. We offer Genuine AiM cable harness, cable extensions, converters, power supply cables and more. 5 Pin 719 threaded, ECU connection, 711 threaded, and more. Trust AiM to take you to the finish line.

SmartyCam GP HD 2.2 to AiM Dash Connection Cable
In Stock
AiM SmartyCam GP HD 2.2 and SmartyCam HD Version 1 (Black Box Camera) replacement connection cable to connect to your Solo DL, MXS, MXG, MXP, MXL2, AiM Data Logger or SMC Bridge. This is a connection cable that has a 712 5 pin male connector on one end and another 712 5 pin male connector on the other end. 
$49.99
AiM MXL 3.5mm Download Cable
Last items in stock
AiM MXL Download Cable to download your data from your MXL Dash to your laptop. The AiM MXL Download Cable lets you easily transfer your AiM Data to your Laptop.
$69.99
AiM 719 to 712 Adapter Cable 2 Meter
In Stock
AiM 719 to 4 Pin Adapter Cables Have a Female 4-pin 719 connector at one end and a male 4-pin 712 connector at the other to connect most analog automotive sensors to the MyChron3 XG-Log Auto Dash or AiM EVO4 Data Logger. 
$38.99
AiM 719 to 719 Patch Cable 2 Meter
In Stock
AiM 719 to 719 extension cables have a female 4-pin 719 connector at one end and a male 4-pin 719 connector at the other to connect most analog automotive sensors to AiM Auto Dashes. This is a Male to Female extension cable and can be connected to other 719-719 cables to extend the length from dash to sensor. If you have a screw on connector, look at the AiM 712 Cables.
$33.99
AiM 719 to 719 Patch Cable 1.5 Meter
In Stock
AiM 719 to 719 Extension Cables Have a Female 4-pin 719 Connector at one end and a male 4-pin 719 connector at the other to connect most analog automotive sensors to AiM Auto Dashes. This is a Male to Female extension cable and can be connected to other 719-719 cables to extend the length from dash to sensor. If you have a screw on connector, look at the AiM 712 Cables.
$28.99
AiM 719 to 719 Patch Cable 1 Meter
In Stock
AiM 719 to 719 Extension Cables Have a Female 4-pin 719 Connector at one end and a male 4-pin 719 connector at the other to connect most analog automotive sensors to AiM Auto Dashes. This is a Male to Female extension cable and can be connected to other 719-719 cables to extend the length from dash to sensor. If you have a screw on connector, look at the AiM 712 Cables.
$28.99
AiM 719 to 719 Patch Cable 3 Meter
Last items in stock
AiM 719 to 719 Extension Cables Have a Female 4-pin 719 Connector at one end and a male 4-pin 719 connector at the other to connect most analog automotive sensors to AiM Auto Dashes. This is a Male to Female extension cable and can be connected to other 719-719 cables to extend the length from dash to sensor. If you have a screw on connector, look at the AiM 712 Cables.
$36.99
AiM SmartyCam 7-Pin to 5-Pin CAN Cable with Microphone Jack, 4M
Last items in stock
AiM Smartycam CAN/RS232 Cable with a Microphone to your original AiM SmartyCam (2009-2013) and new SmartyCam HD v2 / SmartyCam HD GP all have an internal microphone for great racing sound, but it does limit your sound options. This special cable has an external microphone 3.5mm mono jack at the end of the "Y" lead. 
$68.99
AiM MXL to MXG, MXS, MXL2 Adapter Harness
Last items in stock
For use when you upgrade from an AiM MXL Pista or Strada to the modern MXS, MXG, MXP or MXL2 dash. You could remove the MXL harness from the chassis and replace it with the supplied harness that comes with the MXS, MXG or MXL2 or use this adapter harness to make installation easy.
$365.00
AiM LVDS 2 Meter Camera Cable for SmartyCam GP HD Up tp Rev 2.1) to Recorder Unit
Last items in stock
Replacement AiM SmartyCam HD GP to base recording unit cable. This cable connects the bullet cam to the base recorder, has special shielding, and is only used in the Smarty HD GP camera systems. This cable has 5 pin male screw-in (712 type) on each end but is unique to this application only. 
$91.99
AiM 12V Power Cord for Solo Cig Lighter For Old Solo
Last items in stock
Power Your AiM Solo With This 12V Power Cable Using Your Car Cigarette Lighter. Easy to install by threading into your 3-pin bottom port on your AiM Solo so provide endless power throughout your longest races and weekends. 
$39.99
AiM 719 4 Pin Male Connector
Last items in stock
AiM 4 Pin 719 Male Connector to replace or add to your AiM Data system. AiM 719 fittings are the most commonly used temperature and pressure sensor connector fittings, linear & string potentiometers and AiM extension cables. 
$10.00
AiM 719 4 Pin Female Connector
In Stock
AiM 4 Pin 719 Female Connector to replace or add to your AiM Data system. AiM 719 fittings are the most commonly used temperature and pressure sensor connector fittings, linear & string potentiometers and AiM extension cables. 
$10.00
AiM 719 to 712 Adapter Cable 1.5 Meter
In Stock
AiM 719 to 4 Pin Adapter Cables Have a Female 4-pin 719 connector at one end and a male 4-pin 712 connector at the other to connect most analog automotive sensors to the MyChron3 XG-Log Auto Dash or AiM EVO4 Data Logger. 
$38.99
AiM 719 to 712 Adapter Cable 1 Meter
In Stock
AiM 719 to 4 Pin Adapter Cables Have a Female 4-pin 719 connector at one end and a male 4-pin 712 connector at the other to connect most analog automotive sensors to the MyChron3 XG-Log Auto Dash or AiM EVO4 Data Logger. 
$38.99
AiM 719 to 712 Adapter Cable 3 Meter
In Stock
AiM 719 to 4 Pin Adapter Cables Have a Female 4-pin 719 connector at one end and a male 4-pin 712 connector at the other to connect most analog automotive sensors to the MyChron3 XG-Log Auto Dash or AiM EVO4 Data Logger. 
$38.99
AiM 719 to 712 Adapter Cable .5 Meter
In Stock
AiM 719 to 4 Pin Adapter Cables Have a Female 4-pin 719 connector at one end and a male 4-pin 712 connector at the other to connect most analog automotive sensors to the MyChron3 XG-Log Auto Dash or AiM EVO4 Data Logger. 
$38.99
AiM 719 to 712 Adapter Cable 4 Meter
In Stock
AiM 719 to 4 Pin Adapter Cables Have a Female 4-pin 719 connector at one end and a male 4-pin 712 connector at the other to connect most analog automotive sensors to the MyChron3 XG-Log Auto Dash or AiM EVO4 Data Logger. 
$38.99
AiM MyChron 3 (Auto) Download Cable
Last items in stock
MyChron3 Plus 4 Pin (719 Connector) to USB (Auto) Download Cable. This AiM USB to 719 (4 pin) cable is how you download your data from your dash. This cable fits AiM MyChron3 Plus or MyChron3 Extreme kart dashes AiM MyChron3 Plus, Gold, and XG-Log auto dashes, 
$69.99
AiM SmartyCam CAN Cable with Microphone Jack, 2M
Last items in stock
The original AiM SmartyCam (2009-2013) and new SmartyCam HD v2 / SmartyCam HD GP all have an internal microphone for great racing sound, but it does limit your sound options. This special cable has a 3.5mm mono jack for an external microphone. The input from this jack automatically mixes with the sound from the SmartyCam internal microphone.
$67.99
AiM 719 to 712 Adapter Cable 2.5 Meter
In Stock
AiM 719 to 4 Pin Adapter Cables Have a Female 4-pin 719 connector at one end and a male 4-pin 712 connector at the other to connect most analog automotive sensors to the MyChron3 XG-Log Auto Dash or AiM EVO4 Data Logger. 
$38.99
AiM 719 to 719 Patch Cable .5 Meter
Last items in stock
AiM 719 to 719 Extension Cables Have a Female 4-pin 719 Connector at one end and a male 4-pin 719 connector at the other to connect most analog automotive sensors to AiM Auto Dashes. This is a Male to Female extension cable and can be connected to other 719-719 cables to extend the length from dash to sensor. If you have a screw-on connector, look at the AiM 712 Cables.
$28.99
AiM 37 Pin Primary Harness for MXM, MXS, MXG, MXL2 Dashes
Last items in stock
This is the harness that comes with new AIM MXM, MXS, MXG and MXL2 dashes. Having a 37 pin connector on the dash side and break-out connections for 12v+, 12V-, CAN ECU connection, K line, analog sensor channels 1,2,3,4, digital wheel speed, optical lap timing sensor input, and CAN expansion. For use when you move your primary AiM Dash Logger from your primary vehicle to your back-up vehicle. 
$424.99
AiM 712 Thread On Dust Cap
In Stock
This stainless steel thread on dust cap fits all AiM 712 female connections. This AiM 712 dust cap fits all 3, 4, 5, and 7 pin female ports found on AiM Mychron's, AiM Evo data Loggers, AIM data hubs and more. We usually seal all open ports to eliminate any water damage in the wettest conditions.
$4.95
AiM Solo 2 DL RPM Input Wire
In Stock
The AiM V02589020, called the AiM Solo 2 DL RPM Input Wire, is used to connect your AiM Solo 2 DL to an older generation (non-ECU) vehicle. On the bottom right of your Solo 2 DL there is an 8 pin connector that you can connect to the low voltage side of your coil. The peak can be anywhere from 150 to 400 V or from a square wave with a peak of 5 to 50 V. 
$45.00
AiM Solo 2 DL CAN/RS232 Wiring Harness (New Solo 2 DL)
Last items in stock
This AiM V02569050 harness connects your Solo 2 DL to your ECU via CAN or RS232 wiring. One end has a 7-pin 712 (screw-in) connector to fit the Solo 2 DL, and the other has 6 non-terminated wires (CAN+, CAN-, RS232RX, RS232TX, Power, and Ground).
$44.99
AiM Solo 2 DL to OBD-II Connector (new Solo 2 DL)
In Stock
AiM Solo 2 DL to OBD-II Port Connection Cable On Your Car For Easy Addition of RPM and other vehicle data. One end has the K-Line (OBD-2) plug to fit the diagnostic port, and the other end has a 7-pin 712 (screw-in) connector for the Solo 2 DL. OBD-II is also known as K-Line.
$49.99
AiM Shift Light Module Patch Cable 1 Meter
Last items in stock
The AiM Shift Light Module has a female 712 5 pin connection on the module. To connect it to your AiM dash you will need an extension cable like the AiM V02554810 that has both male 712 5 pin male going to a 712 5 pin male connector. The 712 5 pin has 5 pins and a chrome threaded barrel (screw-in) connection.
$39.99
AiM Solo 2 & Solo 2 DL AC Wall Charger
Last items in stock
The AiM X06A12VBM, is the wall charger in every new AiM Solo 2 and Solo 2 DL kit. This wall charger takes the US 120VAC wall outlet and adapts it to the required 12VDC you need to charge your AiM Solo 2 or Solo 2 DL the night before your event. 
$34.95
AiM 712 5 Pin Male Binder Connector
Last items in stock
This 712 AiM 5 pin threaded connector with male pins is a common cable end on many AiM CAN connections. If you are shortening or making custom length cables, the AiM 9904130005 Binder 712 5-pin/Male is a common part. 
$17.00
AiM 5-Pin 712 to DC (Lighter Plug) Cable for Solo2/Solo2DL
In Stock
Power Your AiM Solo 2 or Solo 2 DL with this 12V Power Cable Using Your Car Cigarette Lighter. Easy to install by threading into your 5-pin bottom port on your AiM Solo 2 or Solo 2 DL so provide endless power throughout your longest races and weekends. 
$51.99
AiM Solo 2 Vehicle Power Wiring Harness
In Stock
Now you can power your AiM Solo 2 (non DL)  for your entire endurance race without the need to charge the battery. The power cable that comes with the AiM Solo 2 in the package is set up for a cigarette lighter connection, but this is a hard wire connection for true race cars.
$52.99
AiM Hondata K-Pro Interface Cable
Last items in stock
The AiM X05EFIHKPRO adapter cable connects your AiM Sports MXL Strada and Pista dash displays to the Hondata K-Pro ECU. It connects to the dash via the CAN+ and CAN- wires off of the Hondata harness and to your AiM 12VDC+, 12VDC-, and RS232RX
$84.00
AiM Trackday Kit Short Cable for SmartyCam HD Rev 2.1 & Solo 2 DL
In Stock
The AiM Trackday kit mount offers a neat solution for connecting your Solo 2 DL & SmartyCam HD Rev 2.1 without dealing with the 2 meter cable normally included with the Smartycam. This is the same cable included in the AiM Trackday Kit.
$50.00
AiM 5 Pin 712 to 7 Pin 712 Cable for SmartyCam HD 2.1 to Solo DL, MXS, MXG & MXL2 - 2 Meter
In Stock
The AiM V02566070 CAN cables have a male 5-pin 712 (screw-in) connector and a 7-pin 712 (screw-in) connector to connect the AiM SmartyCam HD 2.1 (version 2.1 black box looking camera) to your Solo DL, MXS, MXG, MXL2 in the shorter 2 meter length. This cable also is used to connect your AiM SmartyCam HD (version 1) to your AiM logger or SMC Bridge.
$49.99
AiM 719 to 719 Patch Cable 4 Meter
AiM 719 to 719 Extension Cables Have a Female 4-pin 719 Connector at one end and a male 4-pin 719 connector at the other to connect most analog automotive sensors to AiM Auto Dashes. This is a Male to Female extension cable and can be connected to other 719-719 cables to extend the length from dash to sensor. If you have a screw on connector, look at the AiM 712 Cables.
$38.99
AiM Solo DL to OBD-II Connector (Old Solo DL)
AiM SoloDL to OBD-II Port Connection Cable On Your Car For Easy Addition of RPM and other vehicle data. One end has the K-Line (OBD-2) plug to fit the diagnostic port, and the other end has a 7-pin 712 (screw-in) connector for the SoloDL. OBD-II is also known as K-Line.
$49.99
AiM Solo Wiring Harness (Old Solo)
Now you can power your AiM Solo (original non-DL)  for your entire endurance race without the need to charge the battery. The power cable that comes with the AiM Solo in the package is set up for a cigarette lighter connection, but this is a hard wire connection for true race cars
$44.99
AiM OBD-2 to MXL2, MXS & MXG Dash Cable
AiM cable for connecting an AiM dash like the AiM MXS, MXG, MXL Pro, and Evo 4. This is a special cable that takes your OBD-2 (K-Line) car connector and conects to the next generation AiM dashes via the Deutsch DTM Connector.
$99.99
AiM 7-Pin 712 to DC (Lighter Plug) Cable for Old SoloDL
Power Your AiM Solo DL With This 12V Power Cable Using Your Car Cigarette Lighter. Easy to install by threading into your 73-pin bottom port on your AiM Solo DL so provide endless power throughout your longest races and weekends. 
$34.99
AiM Cable for SOLO, MXS, MXG & MXL2 connect, download
AiM download cable for the AiM MXS, MXG & MXL2 dash loggers. Now you can easily download without wi-fi for a faster download when pit time counts. Secure and lightning fast, download your data the fastest way possible, with the AiM Download cable.
$9.99
AiM Solo DL CAN/RS232 Wiring Harness (Old Solo DL)
Moving your original AiM Solo DL from one car to another and need another harness for only power or both power and data input, this is your cable. If you are putting a Solo DL into an older vehicle and need a power supply cable, use this and use only the + and - wires and fold back the can inputs. 
$44.99