MyChron Replacement & Patch Cables

Cables

AiM Cables For Your Kart Racing Needs. Racing demands the best in connections. We offer Genuine AiM cable harnesses, cable extensions, converters, power supply cables and more. 5 Pin 719 threaded, ECU connection, 711 threaded, and more. Trust AiM to take you to the finish line.

AiM Data Hub 4-Port CAN for AiM MXG, MXS, & Pista
Last items in stock
Extend The Capabilities Of Your AiM Solo DL, MXS, MXG, MXL, Pista / Pro Data Logger without occupying any more channels or running more cables to your dash. AiM 4-Port CAN Data Hub connects up to four CAN peripherals to each Data Hub. 
$59.00
AiM MyChron Kart Four Port Expansion Module
In Stock
A complete, value-for-money instrument for professional kart analysis. MyChron Expansion is the new channel multiplier improving MyChron5, MyChron5 2T, MyChron4, and MyChron4 2T performances, thanks to four additional channels and a further connector for the CAN bus.
$249.00
AiM 719 to 3-pin 712 Adapter Cable for Rotax Temp Sensor
In Stock
This patch cable has a 719 push-on connector at one end and a 3-pin 712 screw-in connector at the other. It is only used in karting applications, usually with the Rotax engine. This is the same cable included with the AiM Rotax Water Temperature Sensor Kit (Part No. AIM-MC-040). 
$34.99
MyChron 5 & 4 2T Y-Cable, H2O Temp & EGT
In Stock
AiM Y-Cable is designed for the MyChron5 and MyChron  2T kart dash. It has a 7-pin male 712 (screw-in) connector for the dash, one K-type (2-pin flat yellow) female connector to accept a K-type thermocouple, and a 4-pin female 719 (push-in) connector for a thermoresistor temperature sensor like the AiM Rotax Water Temperature Sensor Kit.
$44.99
AiM MyChron 14mm CHT Sensor Under Spark Plug
Last items in stock
AiM CHT (Cylinder Head Temperature) Sensor Kit that fits under a 14mm spark plug and has a 719 thread on connector to go to your AiM Mychron. Install this AiM Mychron 14mm Under Plug CHT sensor under the spark plug of most air cooled engines like the LO-206, Yamaha KT100 and most every Honda out there. This is the exact replacment sensor sent with all Aim MyChron Kits.
$44.99
AiM MyChron EGT Bung - Weld In
In Stock
Weld-in EGT Bung for all AiM MyChron Kart Dashs. The AiM EGT weld-in bung is an easy way to gather EGT temperatures by simply welding it into your exhaust and threading an AiM EGT Sensor into it. We have found the bung should be mounted 150mm (5.90") from the exhaust port to most accurately measure temperatures ranging from 0 to 1832° F (up to 1000°C). 
$4.95
MyChron5 & 4 2T Y-Cable, CHT & EGT
Last items in stock
AiM Y-Cable is designed for the MyChron5 2T kart dash.This Y-Cable is designed for the MyChron5 2T and MyChron4 2T kart dash. It has a 712 7-pin male connector for the dash, and two K-type (2-pin flat yellow) female connectors to accept K-type thermocouples.
$44.99
AiM MyChron EGT Thermocouple Sensor
In Stock
AiM EGT Sensor with a K-Type (two blade flat yellow) connector. Install this AiM Mychron 3/4/5 EGT Thermocouple 150mm (5.90") from the exhaust port to accurately measure temperatures ranging from 0 to 1832° F (up to 1000°C).  This is the exact replacment sensor sent with all Aim MyChron Kits.
$44.99
AiM MyChron 3 (Auto) Download Cable
Last items in stock
MyChron3 Plus 4 Pin (719 Connector) to USB (Auto) Download Cable. This AiM USB to 719 (4 pin) cable is how you download your data from your dash. This cable fits AiM MyChron3 Plus or MyChron3 Extreme kart dashes AiM MyChron3 Plus, Gold, and XG-Log auto dashes, 
$69.99
MyChron Kart Accelerator/Brake Pedal Position Sensor Kit
Last items in stock
This sensor uses a magnet to send kart throttle or brake position data to your MyChron5 or MyChron 4 kart data logger. Easy to connect and program the AiM MyChron Kart pedal Position sensor can give accurate data analysis of brake lock-up, and throttle position VS RPM & Lateral and Longitudinal G's. This is one of AiM's best kart sensors.  
$118.99
AiM MyChron 5 Battery Replacement Pack
Have a charged extra MyChron 5 battery pack, ready to go. Be ready for anything on the kart track with this rechargeable Lithium battery. You will no longer need to carry with you or worse, locate at your track, your dead MyChron 5 Battery.
$65.00
AiM MyChron 5 External Power Cable
AiM MyChron 5 external power lead allows you to power your MyChron5 directly from your kart battery. Also can be connected to any 12V DC mini battery pack (RC Car) or portable power supply for endurance kart racing using their spec karts.
$33.00
AiM MyChron 5 Battery Block Off Plate
Last items in stock
AiM MyChron 5 battery block off plate is used when you use an external power cable to power you MyChron 5 dash. By powering your MyChron 5 by your kart battery, you now have an almost eternal power supply for your kart dash. To seal your MyChron 5 against the elements, this AiM battery block off plate kit is used.
$16.00
MyChron5 & 4 2T Y-Cable, CHT & EGT - 5 meter
Last items in stock
AiM Y-Cable is designed for the MyChron5 2T kart dash.This Y-Cable is designed for the MyChron5 2T and MyChron4 2T kart dash. It has a 712 7-pin male connector for the dash, and two K-type (2-pin flat yellow) female connectors to accept K-type thermocouples.
$60.00
AiM MyChron 5/4 RPM Tach Lead with Plastic Clip
In Stock
AiM replacement RPM wire with plastic clip to mount to your kart spark plug wire and AiM Mychron 5S, 5 or 4 (all versions) kart dash. Measuring 65" long, you simply snap the plastic lead around your spark plug wire and loop the other insulated wire end through your AiM MyChron 5/4 display. This item usually lasts many years unless it has been damaged by dragging on the ground or accidentally cut.
$11.99
AiM MyChron 5/4/3 Thermocouple Patch Cable
In Stock
AiM MyChron Thermocouple Patch Cable, part number AiM V03CCB15M has a 3 Pin 712 (thread-on) male connector with a K-Type (two blade flat yellow) female connector on the other end. This patch cable is used to connect the AiM Mychron 3/4/5 dash to your AiM thermocouple K-Type connector.
$34.99
AiM MyChron 12mm CHT Sensor Under Spark Plug
Last items in stock
AiM CHT (Cylinder Head Temperature) Sensor Kit that fits under a 12mm spark plug and has a 712 thread on connector to go to your AiM Mychron. Install this AiM Mychron 12mm Under Plug CHT sensor under the spark plug of many air cooled engines.
$44.99
AiM Data Hub 2-Port CAN for AIM MyChron5 & 4
Extend the capabilities of your AiM MyChron4 (kart) dash without occupying any more channels or running more cables to your dash. With the 2-port CAN data hub for AiM MyChron4, connect up to two CAN peripherals to each data hub. 
$76.00
AiM MyChron EGT Sensor w/ Patch Cable - 2 Piece
AiM EGT Sensor Kit with 719 connector. Install this AiM Mychron 4EGT Thermocouple 150mm (5.90") from the exhaust port to accurately measure temperatures ranging from 0 to 1832° F (up to 1000°C).  This is the exact replacement sensor sent with all Aim MyChron Kits.
$79.99
AiM MyChron 14mm CHT Sensor Under Spark Plug - K-Type
AiM CHT (Cylinder Head Temperature) Sensor Kit that fits under a 14mm spark plug and has a K-Type connector to go to your AiM Mychron 2T. Install this AiM Mychron 14mm Under Plug CHT sensor under the spark plug of most air cooled engines like the LO-206, Yamaha KT100 and most every Honda out there. This is the exact replacement sensor sent with all Aim MyChron 2T Kits.
$44.99
AiM MyChron Water Thermocouple w/ 5mm Threads
AiM EGT Water THermocouple Sensor with a K-Type (two blade flat yellow) connector and 5mm threads on the sensor. Install this AiM MyChron5, Mychron4, or Mychron3, MyChron 3 Gold Auto and Mychron 3 Plus Water Temperature that has 5mm male threads into any 5mm female port and connect to your K-Type (yellow flat) connector.
$44.99
AiM MyChron Kart Tire Temperature Sensor Kit
This complete AIM Kart Tire Temperature sensor kit covers all 4 tires, easily connects to your MyChron 5 or MyChron 5 2T and is specifically designed to measure the surface temperature of all 4 kart tires, providing important info for chassis tuning, tire exploitation, and driver behavior. 
$499.00
AiM Mychron 3/4/5 Infrared Beacon Receiver
he MyChron Optic Lap Receiver is used with the MyChron Optic Lap Transmitter (Part No. AIM-MC-001) for fast, reliable lap time sampling right to your dash. This unit is the same receiver included with MyChron Kart Dash Kits. The 4-pin 712 (screw-in) connector works with all AiM / MyChron kart dashes from the MyChron3 through to the MyChron5.
$74.99
AiM MyChron 10mm CHT Sensor Under Spark Plug
AiM CHT (Cylinder Head Temperature) Sensor Kit that fits under a 10mm spark plug and has a 712 thread on the connector to go to your AiM Mychron. Install this AiM Mychron 12mm Under Plug CHT sensor under the spark plug of many air-cooled engines.
$38.99