Karting Data Acquisition & Video

Kart Data / Video

Kart Racing Data Acquisition/Video. A data acquisition system measures and records important vehicle parameters via sensors, optical beacons, and even GPS. These parameters can be analyzed to gain insight into the behavior of the engine, chassis, and driver, which can ultimately result in greater predictability and better performance on race day. Data acquisition is the key to unlocking free speed! Over recent years, data acquisition systems have become powerful tools that are vital to success at all levels of motorsports. Or, maybe you want to share a video of your winning lap and podium photo op with family and friends - we've got you covered there too. Let us maximize your machine and you with our full line of data acquisition and video products.

AiM MyChron Kart Four Port Expansion Module
Last items in stock
A complete, value-for-money instrument for professional kart analysis. MyChron Expansion is the new channel multiplier improving MyChron5, MyChron5 2T, MyChron4, and MyChron4 2T performances, thanks to four additional channels and a further connector for the CAN bus.
$299.00
AiM Data Hub 4-Port CAN for AiM MXG, MXS, & Pista
In Stock
Extend The Capabilities Of Your AiM Solo DL, MXS, MXG, MXL, Pista / Pro Data Logger without occupying any more channels or running more cables to your dash. AiM 4-Port CAN Data Hub connects up to four CAN peripherals to each Data Hub. 
$77.00
AiM Data Hub 2-Port CAN for AIM MyChron5 & 4
Last items in stock
Extend the capabilities of your AiM MyChron4 (kart) dash without occupying any more channels or running more cables to your dash. With the 2-port CAN data hub for AiM MyChron4, connect up to two CAN peripherals to each data hub. 
$76.00
AiM MyChron Rotax Coolant Temperature Sensor Kit M10
In Stock
This thermoresistive Water Temperature sensor is for use with AiM MyChron3, MyChron4 and MyChron 5 and 2T versions of kart dashes. The sensor has M10 male threads for easy installation in Rotax engines. The sensor lead has a 719 push-on connector, and includes a 1.5 meter adapter cable to connect to your MyChron dash.
$79.95
AiM 719 to 3-pin 712 Adapter Cable for Rotax Temp Sensor
In Stock
This patch cable has a 719 push-on connector at one end and a 3-pin 712 screw-in connector at the other. It is only used in karting applications, usually with the Rotax engine. This is the same cable included with the AiM Rotax Water Temperature Sensor Kit (Part No. AIM-MC-040). 
$34.99
MyChron 5 & 4 2T Y-Cable, H2O Temp & EGT
In Stock
AiM Y-Cable is designed for the MyChron5 and MyChron  2T kart dash. It has a 7-pin male 712 (screw-in) connector for the dash, one K-type (2-pin flat yellow) female connector to accept a K-type thermocouple, and a 4-pin female 719 (push-in) connector for a thermoresistor temperature sensor like the AiM Rotax Water Temperature Sensor Kit.
$60.00
AiM MyChron 14mm CHT Sensor Under Spark Plug
In Stock
AiM CHT (Cylinder Head Temperature) Sensor Kit that fits under a 14mm spark plug and has a 719 thread on connector to go to your AiM Mychron. Install this AiM Mychron 14mm Under Plug CHT sensor under the spark plug of most air cooled engines like the LO-206, Yamaha KT100 and most every Honda out there. This is the exact replacment sensor sent with all Aim MyChron Kits.
$44.99
AiM MyChron EGT Bung - Weld In
In Stock
Weld-in EGT Bung for all AiM MyChron Kart Dashes. The AiM EGT weld-in bung is an easy way to gather EGT temperatures by simply welding it into your exhaust and threading an AiM EGT Sensor into it. We have found the bung should be mounted 150mm (5.90") from the exhaust port to most accurately measure temperatures ranging from 0 to 1832° F (up to 1000°C). 
$6.00
MyChron5 & 4 2T Y-Cable, CHT & EGT
In Stock
AiM Y-Cable is designed for the MyChron5 2T kart dash.This Y-Cable is designed for the MyChron5 2T and MyChron4 2T kart dash. It has a 712 7-pin male connector for the dash, and two K-type (2-pin flat yellow) female connectors to accept K-type thermocouples.
$50.00
AiM MyChron EGT Thermocouple Sensor
In Stock
AiM EGT Sensor with a K-Type (two blade flat yellow) connector. Install this AiM Mychron 3/4/5 EGT Thermocouple 150mm (5.90") from the exhaust port to accurately measure temperatures ranging from 0 to 1832° F (up to 1000°C).  This is the exact replacment sensor sent with all Aim MyChron Kits.
$74.99
AiM MyChron 14mm CHT Sensor Under Spark Plug - K-Type
Last items in stock
AiM CHT (Cylinder Head Temperature) Sensor Kit that fits under a 14mm spark plug and has a K-Type connector to go to your AiM Mychron 2T. Install this AiM Mychron 14mm Under Plug CHT sensor under the spark plug of most air cooled engines like the LO-206, Yamaha KT100 and most every Honda out there. This is the exact replacement sensor sent with all Aim MyChron 2T Kits.
$44.99
AiM MyChron EGT Thermocouple Sensor - T12/ICC Pipe (CIK/ FIA Homologated)
In Stock
AiM EGT Sensor designed for KZ & KF CIK/FIA homoligated exhaust pipes. Easily connects with any K-Type (two blade flat yellow) connector and threads onto your KZ or KF homologated exhaust pipes sach as IAME, ROK, DeBei, TM and many others. Install this AiM Mychron 3/4/5 EGT Thermocouple into the exhaust port to accurately measure temperatures ranging from 0 to 1832° F (up to 1000°C).  
$74.99
AiM MyChron 5 Battery Replacement Pack
Have a charged extra MyChron 5 battery pack, ready to go. Be ready for anything on the kart track with this rechargeable Lithium battery. You will no longer need to carry with you or worse, locate at your track, your dead MyChron 5 Battery.
$65.00
AiM MyChron Controller for Infrared Tire Temp Sensors
Last items in stock
The AiM IR Temp Controller unit is designed specifically to connect four MyChron IR Tire Temperature Sensors to your AiM MyChron5 via the CAN "EXP" port. It can also connect inline with the MyChron Expansion.
$143.99
AiM MyChron 5 External Power Cable
AiM MyChron 5 external power lead allows you to power your MyChron5 directly from your kart battery. Also can be connected to any 12V DC mini battery pack (RC Car) or portable power supply for endurance kart racing using their spec karts.
$38.00
AiM MyChron 5 Battery Block Off Plate
AiM MyChron 5 battery block off plate is used when you use an external power cable to power you MyChron 5 dash. By powering your MyChron 5 by your kart battery, you now have an almost eternal power supply for your kart dash. To seal your MyChron 5 against the elements, this AiM battery block off plate kit is used.
$18.00
MyChron5 & 4 2T Y-Cable, CHT & EGT - 5 meter
In Stock
AiM Y-Cable is designed for the MyChron5 2T kart dash.This Y-Cable is designed for the MyChron5 2T and MyChron4 2T kart dash. It has a 712 7-pin male connector for the dash, and two K-type (2-pin flat yellow) female connectors to accept K-type thermocouples.
$60.00
AiM MyChron 5/4 RPM Tach Lead with Plastic Clip
Last items in stock
AiM replacement RPM wire with plastic clip to mount to your kart spark plug wire and AiM Mychron 5S, 5 or 4 (all versions) kart dash. Measuring 65" long, you simply snap the plastic lead around your spark plug wire and loop the other insulated wire end through your AiM MyChron 5/4 display. This item usually lasts many years unless it has been damaged by dragging on the ground or accidentally cut.
$11.99
AiM MyChron 5/4/3 Thermocouple Patch Cable
In Stock
AiM MyChron Thermocouple Patch Cable, part number AiM V03CCB15M has a 3 Pin 712 (thread-on) male connector with a K-Type (two blade flat yellow) female connector on the other end. This patch cable is used to connect the AiM Mychron 3/4/5 dash to your AiM thermocouple K-Type connector.
$50.00
AiM MyChron 12mm CHT Sensor Under Spark Plug
Last items in stock
AiM CHT (Cylinder Head Temperature) Sensor Kit that fits under a 12mm spark plug and has a 712 thread on connector to go to your AiM Mychron. Install this AiM Mychron 12mm Under Plug CHT sensor under the spark plug of many air cooled engines.
$44.99
AiM MyChron 5 Battery Charger
Last items in stock
AiM MyChron 5 battery charger is used to power up your MyChron 5 rechargeable lithium batteries. Plug into a USB port and you're ready to start charging your MyChron5 battery!
$60.00
MyLaps TR2 GO Kart Lifetime Rechargeable Transponder - No Subscription
The new, never registered, rechargeable MyLaps TR2 GO lifetime transponder allows for quick and easy transfer of your transponder between multiple vehicles. A full charge is achieved in 14 hours and will give the transponder a minimum of 3 days of continuous operating time.
$429.00
AiM SmartyCam HD Rev. 2.1 Video Camera With Video Overlay
SmartyCam HD Rev.2.1 By AiM Changes Racecar Video Forever. AiM started with the game changing SmartyCam original (grey unit). When the SmartyCam grew again to the HD (black box) the already loved features remained and even a few more were added. Now we present the SmartyCam HD Rev.2. The culmination of every video camera AiM has produced. Other cameras systems sorry....Check and Mate
AiM MyChron5 S GPS Kart Dash w/ 1 Sensor
Power and compact, the AiM Mychron5 is the  Kart Dash & Data Logger you have been waiting for. GPS enabled, multi colored screen, and is expected to be the most popular part Aim has ever released. Building off the tested and proven Mychron 4, it improves on the most favorite kart dash ever produced.
AiM MyChron5 S 2T GPS Kart Dash w/ 2 Sensors
Powerful and compact, the AiM Mychron5 is the  Kart Dash & Data Logger you have been waiting for. GPS enabled, multi colored screen, and is expected to be the most popular part Aim has ever released. Building off the tested and proven Mychron 4 2T, it improves on the most favorite kart dash ever produced.
MyChron Kart Accelerator/Brake Pedal Position Sensor Kit
This sensor uses a magnet to send kart throttle or brake position data to your MyChron5 or MyChron 4 kart data logger. Easy to connect and program the AiM MyChron Kart pedal Position sensor can give accurate data analysis of brake lock-up, and throttle position VS RPM & Lateral and Longitudinal G's. This is one of AiM's best kart sensors.  
$135.00
AiM SmartyCam GP HD 2.2 Video Camera with Data Overlay
Last items in stock
SmartyCam GP HD 2.2 is the latest generation in the best in motorsports cameras. AiM SmartyCam 2.2 has been dedigned for the ultimate in reliability and durability in the motorsports world. If you have an AIM dash and want to add great videos that include all the technical information that will help you improve your performance. SmartyCam GP HD 2.2 is a quite versatile system.
New
AiM SW4 Datalogger 320mm Steering Wheel
The all-new AiM Formula Steering Wheel 4 GT320 is AiM's most advanced steering wheel to date. Get a closer look at our brand new design of display and functions.
$3,349.00