Coolshirt
Coolshirt Cool-A-Clava
$115.00
Coolshirt Cool-A-Clava
The Coolshirt Cool-A-Clava literally helps you keep a cool head under pressure! This helmet insert is superior to any current air- or water-based head cooling unit on the market. The Coolshirt Cool-A-Clava plugs in to any current Coolshirt cooler or bag system. The Cool-A-Clava requires no special hardware and can be used with nearly every helmet available!
Last but not least, the Coolshirt Cool-A-Clava eliminates the need to install a separate helmet blower system. That's less drain on your electrical system, fewer hoses, less weight and lower chance of an equipment failure. This is, without a doubt, a must-have to stay cool and focused while on track.
Chillout Systems
Chillout Systems No Drip 1/4" Shirt Adapters
$105.00
Chillout Systems No Drip 1/4" Shirt Adapters
No Drip Adapters from Chillout Systems are designed to never leak and maximize the reliability of your driver cooling unit without the annoying "drip" when you disconnect.
Chillout Systems No Drip 1/4" Shirt Adapter Details:
Manufacturer: ChillOut Systems
Manufacturer Part Number: CO-DLC-1
Works with other ¼" cooling shirts: Yes
Quantity: 4 Pieces (2 complete sets)
We have found in very long endurance races such as the 2021 World Racing league 24 Hours of Sebring, multiple driver changes have parasitic loss of fluid during the repetitious connecting of the drivers shirts. No Drip adapters also prevent unintentional release as the Shirt Adapters lock together, linking the hose to your system securely.
Coolshirt
CoolShirt Replacement Cooler Pump
$104.00
CoolShirt Replacement Cooler Pump
This is a genuine CoolShirt replacement pump used in modern CoolShirt hard coolers. If you have a CoolShirt 13qt or 19qt hard sided cooler, with or without the air option, this is the CoolShirt replacement pump you need.
CoolShirt Replacement Cooler Pump Details:
Manufacturer: CoolShirt
Manufacturer part number: CHI-5012-0003
Manufacturer alternate part number: CHI-CTP
CoolShirt calls it Black Motorsports Pump
Fits CoolShirt Hard Coolers: Yes
Fits CoolShirt bag and soft coolers: No
Power requirement: 2 amps
Add an optional FC-1 Temperature Control for complete control over your cooling comfort in the race car.
Coolshirt
Coolshirt Water Hose
from $95.00
Coolshirt Water Supply Hose
The Coolshirt water supply hose connects your Coolshirt cooling garment to your cooler system. Choose from 4-, 8-, and 12-foot lengths. All Coolshirt water supply hoses come with emergency safety pull fittings that will release with as little as 21 pounds of force.
Coolshirt
Coolshirt Cooler Mounting Tray
from $91.00
The Coolshirt Cooler Mounting Tray secures hard-shell units like the Club or Pro System coolers to your vehicle. Comes with a strap, choose 13- or 19-quart depending on your cooler size.
Bell
Bell 10 Hole Top Air
from $79.95
Bell 10 Hole Top Air
The 10 Hole Top Air is designed to utilize the top and forehead ventilation channels on the HP7, HP5, RS7C LTWT, RS7 Carbon, RS7 Pro, GT5 Carbon, and GT5 helmets to allow these models to be adapted for use as a top forced air helmet. The 10 Hole Top Air design directs airflow around the top of the helmet for comfort and onto the shield to reduce fogging.
The kits are attached using aggressive double-sided adhesive and available in Clear, White, Matte Black, and Carbon. Nozzle configurations include V05, V05 45/90 Degree, or Quick Lock V10. Bell's 10 Hole Top Air is fully compatible with the Maglock system using the standard V05 nozzle.
Coolshirt
CoolShirt Replacement Fan/235 CFM
$77.00
CoolShirt Replacement Fan/235 CFM Air Blower System
This is the factory replacement fan for CoolShirt's ABS-C 235 CFM Air Blower System to keep delivering clean, fresh air to the racer's helmet from the racecar's outside intake. The 235cfm blower is perfect for "hot blooded" drivers or for enduro drivers needing a cooler core temp when the cockpit temperature rises. Keep it running with this replacement fan.
CoolShirt Replacement Fan/235 CFM Air Blower System Details:
Manufacturer: CoolShirt
Manufacturer part number: 5013-0002
CFM: 235
Voltage: 10-16.8 V
Wiring: Yellow+ (Positive), Black - (Ground/Common)
Chillout Systems
Chillout Systems Wiring Harness
$75.00
Chillout Systems Wiring Harness
This 10 AWG wiring harness features a 10-foot shock-resistant rubber power cord wrapped in a protective textile fabric. Overall length is 14 feet.
Chillout Systems
Chillout Systems 4" 285 CFM Blower
$65.00
Chillout Systems 4-Inch 285 CFM Blower
Chillout 4-inch 285 CFM blower offers high air output at a low 4.7 amp draw. Lightweight composite ABS housing makes the Chillout 4" blower the most powerful and reliable in its class.
FEATURES:
285 cubic feet per minute (CFM)
4.7 Amps
12 Volts
Lightweight, durable, and ultra-reliable
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo ST5 Hydration Kit
$49.95
$64.95
Stilo ST5 Helmet Hydration Kit
Hydration bite-valve kit designed specifically for the Stilo ST4 and ST5 helmet.
KIT INCLUDES:
(1) Male hydration connector
(1) Female hydration connector
(1) Hydration tube
(1) Bite valve
Coolshirt
CoolShirt Lightweight Air Hose 1.5" ID x 8'
$49.00
CoolShirt Lightweight Air Hose 1.5" ID x 8'
CoolShirt Helmet Air Hose 1 ½” ID x 8’ is used to connect your helmet cooler to your helmet. Measuring 8 feet long with an inside diameter of 1.5", this easily connects your helmet blower or cooler output to your helmet.
This CoolShirt Helmet Air Hose is a longer version of what is included in our CoolShirt Helmet Blower Systems with 135cfm and CoolShirt Helmet Blower Systems with 235cfm. If extra length of air hose is needed this is the CoolShirt Helmet Air Hose you need.
CoolShirt Lightweight Air Hose 1.5" ID x 8' Details:
Manufacturer: Coolshirt
Manufacturer part numbers: 5013-0003
Manufacturer alternate part number: AIRH-8
Color: Black
Hose ID: 1.5"
Length: 8'
Material: Lightweight Composite
Chillout Systems
Chillout Systems 3" Air Duct Plenum
$48.00
Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system.
The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED:
3" Air Duct Plenum
Coolshirt
Coolshirt Safety-Pull Release Connectors
$45.00
Two female dry quick-disconnects for any Coolshirt system water line. These are designed to disconnect in an emergency by the force of the driver pulling away from the lines.
FEATURES
5/16" female connectors will work with your Coolshirt system (as well as some other cooling products)
Sold as a pair
Coolshirt
Coolshirt Motorsports Drain Kit
$36.00
Coolshirt Motorsports Drain Kit
The Coolshirt motorsports drain kit is designed to make draining your shirt and/or cooler quickly and easily. The kit comes with two female connectors, one male connector, and roughly two feet of tubing.
To drain your garment just connect it to the the female connectors and hang the garment allowing it to gravity-drain. We recommend that you leave the female connectors in the shirt after it has drained for several hours to allow any excess moisture in the tubes to evaporate. If needed, you can blow a light stream or air (10psi or less) through the garment to aid in the draining process.
The male connector and tubing will allow you to plug into the cooler and pump the water out. We recommend that you leave the cooler lip open after pumping the cooler out to allow for any excess moisture to evaporate.
FluidLogic
Maglock Air Hose
from $31.80
Maglock Air Hose
**Maglock Air hose side NOT included**
Maglock Air Hose is built to our exact specifications to ensure that you get the lightest, most flexible hose on the market today. The feedback from our test pilots ensures you that neck fatigue during use is greatly reduced, furthermore, this hose does not leverage or disconnect the Maglock Air in high G or high impact environments. Used by top motorsports athletes including all Andretti Indy cars, Ricky Stenhouse Jr. (NASCAR), Ricky Johnson (TT), and Guy Cosmo (IMSA). We highly recommend our hose to be paired with Maglock Air.
