Carbon TOP AIR APLLIQUÉ FOR STILO
Stilo Carbon TOP AIR APLLIQUÉ FOR STILO $300.00
Designed for performance, the Chillout Carbon Fiber Top Air Aplliqué for Stilo directs air via the rear intake barb and through small holes located on all ST5 helmets.  Constructed from ultra light weight and incredibly resilient, pre-impregnated, dry carbon fiber, the front deflector improves vision by directing air towards the visor and away from the eyes. Old air flows out of the rear holes and from the bottom of the helmet, forcing out hot air and CO2 build-up.  FEATURES Constructed from 1mm dry 3k 2x2 twill weave carbon fiber Connects directly to the Maglock or FluidLogic Helmet air system  Compatible with most Stilo helmets Ultra lightweight and durable  One piece carbon fiber construction, no glue or plastic used. 
image of stilo visr cleaner in a can
Stilo Stilo Acrysol Visor Cleaner $19.95
Stilo Visor Cleaner Ground Shipping only on this item. Stilo helmet visors have a special anti-fog coating that is harmed by any type of ammonia, acidic, or even vinager based cleaners. The only safe way to clean a Stilo visor is with this very fast drying, ultra-purified solvent based cleaner. Stilo Visor Cleaner Details: Manufacturer: Stilo Manufacturer part number: YA0640 Size: 20 oz Aerosol: Yes Approved by Stilo: Yes Acrysol is commonly used in premium auto body shops. Used primarily for body panel degreasing prior to top color coat application, and is the official Stilo visor cleaner. How do you clean a Stilo Visor? We prefer to remove the shield from the helmet and spray a wet mist amount on the inside first. Then quickly and lightly, use a single wiping action to to go from one side to the other going the long way. We then turn the visor over and repeat using the single swipe method. If debris/mud/etc remain, repeat until perfect. This is the Official certified cleaning agent that will keep your vision perfect in front and the competition behind and not damage your special anti-fog coating.
Stilo Bottom Rubber Trim for ST5, CMR, and KRT
Stilo Stilo Bottom Rubber Trim for ST5, CMR, and KRT $12.50
Stilo Bottom Rubber Trim for ST5, CMR, and KRT Did you put your Stilo helmet on your Hans device then then in your helmet bag? After a while, the Hans grip material will start to wear through the Stilo bottom rubber seal. One way to prevent this is to place a towel between your Hans device and your helmet so keep the abrasion to a minimum. If you have not been doing this, the this Stilo Replacement Rubber Seal For the Bottom of Your Stilo Helmet is the fix. Fits all Stilo SA2010 and SA2015 helmets. This is a Genuine Stilo Part for a perfect fit. Stilo Bottom Rubber Trim for ST5, CMR, and KRT Details: Manufacturer: Stilo Manufacturer new part number: YA0874 Fitment: ST5, CMR and KRT Helmets In general, YA0660 is the eye port rubber for all ST5 except ABP. YA0874 can be used on all helmets both auto and karting.
-11% sale
Stilo Carbon Curva 8870 Rib Protector
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo Carbon Curva 8870 Rib Protector $616.95 $686.00
Stilo Carbon Curva 8870 Rib Protector Homologated by the FIA World Motor Sport Council and developed by Stilo, the new Stilo Carbon Curva 8870 Karting Body Protection features Carbon Curva technology patented by the Italian manufacturer, which allowed the fusion of protective carbon and flexible carbon adding top functionality to a device designed to protect the driver's chest and rib, crucial body areas in karting. The drivers wear it under their CIK-FIA-approved overalls, remaining free to move their arms, neck, and head, as it perfectly fits the body. Mandatory in FIA Karting Championships, Cups, and Trophies from the 2021 season, the FIA 8870-2018 Standard for Karting Body Protection (KBP) is extremely light and comfortable. A combination that provides superior protection to kids and adults within an all-in-one device. Designed to withstand 60J of energy to the chest and 100J of energy to the ribs, the FIA KBP standard prevents injuries from impacts with flat or curved structures, the steering wheel or edge of the seat, and the steering column.
Stilo Carbon Curva Rib Protector
Stilo Stilo Carbon Curva Rib Protector $380.95
Stilo Carbon Curva Rib Protector Stilo has developed their patented-technology Kart Carbon Curva Rib Protector for the serious kart racer. Unlike other protectors on the market, this protector incorporates a patented fusion of protective carbon and flexible carbon to form a more comfortable, form-fitting solution while offering superior protection. A great fit results in less movement within the protector, increasing both comfort and protection. Made with an ultra-lightweight carbon construction, the Carbon Curva is vailable in both Medium and Large sizes.
Stilo Carbon Peak Visors ST5 Helmets
Stilo Stilo Carbon Peak Visors ST5 Helmets $246.95
Stilo ST5 Carbon Peak Visors Similar to the bill of a ball cap, the ST5 Peak Visor by Stilo is effective at blocking the sunlight from your eyes. The peak visor can be adjusted to the angle of the sun throughout the day. Fitted for the SA2020 Stilo ST5 models, the ST5 peak is the perfect visor for keeping the sun out of your eyes.    Stilo ST5 Peak Visors Details: Manufacturer: Stilo Fits Stilo ST5: Yes Stilo YA0862 Gloss Carbon Fiber (FIA 8859 weave) Stilo YA0863 Gloss Carbon Fiber (FIA 8860 weave)
-10% sale
Stilo Cheek Pads
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo Cheek Pads $81.37 $90.41
Stilo Cheek Pads Replacement cheek pads for Stilo ST5 / ST5.1 helmets help you customize your helmet to provide the perfect fit!
-28% sale
Stilo Chin Pad
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo Chin Pad $39.95 $54.95
Stilo Chin Pad Replacement chin pad for Stilo ST5.1
sale
Stilo Communications Kits
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo Communications Kits from $118.95 $133.00
Stilo Communications Kits Discovery Parts does not recommend installing these kits without proper training and tools. Call us at (888) 748-7223 and we'll make arrangements for you to send your helmet to us for professional installation and/or retrofitting. PLEASE NOTE: We will not warranty any Stilo communications kit that has not been professionally installed by our team of experts. Stilo AE0210 Details: Manufacturer: Stilo Manufacturer part number: AE0210 Microphone: Yes, Gentex button shaped microphone that fits in chin bar of all Stilo Helmets Speakers: Yes, mounted in nose reducing padded Stilo Ear Cups Wiring protocol: Female IMSA (4C) The Stilo AE0210 is easily the #1 Stilo electronics wiring kit. Fitting all Stilo ST5 GT helmets that have side ports, SA2020, FIA 8859, FIA 8860-2010 and FIA 8860-2018. The round, button microphone is placed into the factory installed hole in the chinbar padding and ear cups are placed into the recesses on each side of the helmet.  Stilo AE0214 Details: Manufacturer: Stilo Manufacturer part number: AE0214 Audio in: Earbud 3.5mm female jack Microphone: Gentex button shaped microphone that fits in chin bar of all Stilo Helmets Who would want the Stilo AE0214? Anyone with a Stilo helmet with custom earbuds that does not want the ear-cups installed. If you find ear cups uncomfortable and use ear buds, then the Stilo AE0214 electronics kit is for you. Audio In: This Stilo EarBud Rally electronics kit uses the Stilo 3.5mm female earbud jack. All audio will be played into your ear buds. Microphone: Your Stilo helmet has a female recess in the front chin bar to place a microphone. The Stilo EarBud Electronics gives you a microphone that fits into the recessed area of your Stilo chin bar.  Stilo AE0320 Details: Manufacturer: Stilo Manufacturer part number: AE0320 Audio in: Earcup and Earbud, both work at the same time Audio out: Gentex flex boom microphone Stilo description: Gen Boom, Speakers, Earbuds 3.5mm What racers prefer the Stilo AE0320? Anyone with an extremely loud race engine. Some formula cars with the engine close to the driver or a ultra high compression race V8. If your car is very loud, or you went to too many Who concerts when you were younger, this is a great communication upgrade.Audio In: This Stilo Dual Rally electronics kit uses the proven Stilo powered ear cup audio electronics for each ear, but also lets you use your earbuds in addition. The audio will be played into both the ear cups and your earbuds at the same time. Microphone: Your Stilo helmet has a female recess in the cheek pad backing and front chin bar to place a noise canceling microphone. The Stilo Dual Rally & Ear Bud Electronics gives you a Gentex noise canceling microphone on a flex boom. You can place the microphone barely touching your upper lip and save your crew chiefs ears. Stilo AE0216 Details: Manufacturer: Stilo Manufacturer part number: AE0216 Microphone: Gentex boom-mounted noise-canceling mic Speakers: Mounted in noise reducing padded Stilo Ear Cups The Stilo AE0216 wiring kit takes the proven ear cups from the AE0210 kit, but replaces the round button microphone with a boom microphone. The boom style microphone allows the driver to place the microphone barely touching their upper lip. This reduces ambient noise transmission through your radio system. This is a great choice for loud cars or anything with a straight cut gearbox. Stilo AE0321 Details: Manufacturer: Stilo Manufacturer part number: AE0321 Wiring protocol: IMSA (4C) Audio in: Earcup Audio out: Gendex flex boom microphone Stilo description: 4 Conductor, Gentex Boom Mic, Earcup Speakers and Earbud 3.5mm Jack Who would want the Stilo AE0321? First you would have a Stilo Formula or Naked Helmet (no side ports), have a race car wired with IMSA communications and want the Stilo noise reduction ear cup communication. Some formula cars with the engine close to the driver or a ultra high compression race V8. If your car is very loud, or you went to too many Who concerts when you were younger, this is a great communication upgrade.Helmet connection: This Stilo cable uses an IMSA (4C) male plug attached to a coil cord to ensure there are no accidental disconnects. Audio In: This Stilo Ear Cup Electronics with Flex Mic and IMSA Coil Cord uses the proven Stilo earcup audio electronics to keep the race car out and the crew member in your ear. There is also a 3.5mm female jack for earbuds. The receiving audio will work through the ear cups or earbuds or both together. This is a proven race worth set-up. Microphone: Your Stilo helmet has a female recess in the front chin bar to to place a noise cancelling microphone, but the 0231 kit uses a Gentex noise cancelling microphone on the end of a flex-boom so you can place the microphone so it is barely touching you upper lip. This is popular in hi-speed formula cars, and extreme environments like Baja 1000, power boats, V8 SuperCars etc. Stilo AE0322 Details: Manufacturer: Stilo Manufacturer part number: AE0322 Wiring protocol: NASCAR (3C) Audio in: Earcup Audio out: Gendex flex boom microphone Stilo description: 3 Conductor, Gentex Boom Mic, Earcup Speakers and Earbud 3.5mm Jack Who would want the Stilo AE0322? First you would have a Stilo Formula or Naked Helmet (no side ports), have a race car wired with NASCAR communications and want the Stilo noise reduction ear cup communication. Some formula cars with the engine close to the driver or a ultra high compression race V8. If your car is very loud, or you went to too many Who concerts when you were younger, this is a great communication upgrade.Helmet connection: This Stilo cable uses a NASCAR (3C) male plug attached to a coil cord to ensure there are no accidental disconnects. Audio In: This Stilo Ear Cup Electronics with Flex Mic and NASCAR Coil Cord uses the proven Stilo earcup audio electronics to keep the race car out and the crew member in your ear. There is also a 3.5mm female jack for earbuds. The receiving audio will work through the ear cups or earbuds or both together. This is a proven race worth set-up. Microphone: Your Stilo helmet has a female recess in the front chin bar to to place a noise canceling microphone, but the 0231 kit uses a Gentex noise canceling microphone on the end of a flex-boom so you can place the microphone so it is barely touching you upper lip. This is popular in hi-speed formula cars, and extreme environments like Baja 1000, power boats, V8 SuperCars etc. Stilo SRO-9217 Kit Details: Manufacturer: Stilo Manufacturer part number: SRO-9217-KIT Helmet Connection 1: Female IMSA connection to connect to the radio harness Helmet Connection 2: Female 3.5mm connection to connect to earbuds Microphone: Gentex noise canceling with flex boom Earpad kit: 2 soft noise transparent earpads If you run in the SRO GT World Series, GT America, GT4 or TC America series, the SRO 2022 rule book removed the legal use of your Stilo earcup communication kit. Our Stilo SRO-9217 kit makes converting your Stilo GT series helmet to the SRO rules fast and easy. We include a genuine Stilo Gentex Boom Mic w/ 3.5mm Earbud Connection and SRO legal ear pad kit. While Stilo earcup communications are still allowed in IMSA, NASCAR, INDYCAR, F4, F3 and many other series, you will need to convert your Stilo GT series helmet to compete while driving in the SRO series. The Stilo SRO-9217 helmet electronic kit replaces your Stilo earcup kit with a Gentex flex boom microphone, 3.5mm earbud connection and soft earpads. Stilo AE0217 Kit Details: Manufacturer: Stilo Manufacturer part number: AE0217 Helmet Connection 1: Female IMSA connection to connect to the radio harness Helmet Connection 2: Female 3.5mm connection to connect to earbuds Microphone: Gentex noise cancelling with flex boom Stilo AE0217 is the helmet electronic kit that uses the female threaded receptacle, a Gentex flex boom microphone, and a 3.5mm earbud connection. If you are using your normal foam or custom earbuds and want a Gentex noise canceling microphone on a flex boom, this is your Stilo helmet wiring kit.
Stilo Crown Pads
Stilo Stilo Crown Pads $35.00
Stilo Crown Pads Replacement crown pads for Stilo ST5 / ST5.1 helmets help you customize your helmet to provide the perfect fit!
-31% sale
Stilo Ear Pillows for ST4 and ST5
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo Ear Pillows for ST4 and ST5 $34.95 $49.95
Stilo Ear Pillows for ST4 and ST5 Stilo Spare Ear Pillows for ST4 and ST5 Details: Manufacturer: Stilo Manufacturer new part number: YA0016 Fitment: All ST4 and ST5 helmets
sale
Stilo Helmet Aero Kits
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo Helmet Aero Kits from $60.77 $67.52
Stilo Helmet Aero Kits These aero kits from Stilo provide all the downforce needed for open-cockpit drivers to reduce helmet lift. They are especially popular for IndyCar, Formula Atlantic, and Radical drivers. Choose between rear aero, front IndyCar kit, or both!
-12% sale
Stilo Helmet Bag Plus HANS
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo Helmet Bag Plus HANS $119.00 $134.95
Stilo Helmet and HANS Bag High quality helmet bag for your Stilo helmet1. Features a durable canvas exterior with a padded velour interior held closed with heavy duty zippers for years of use. Not only do helmet bags help protect your helmet from damage if it falls or bounces around during transport, they also eliminate the need to carry the helmet in hand, allowing you to carry more gear without the fear of dropping this particularly expensive piece of safety gear. This high quality Stilo bag is designed to carry both your helmet and your HANS1, featuring a durable canvas exterior, a padded velour interior, a detachable shoulder strap for hands-free transport, and ventilation ports on the underside of the bag for faster drying. ADDITIONAL FEATURES: Mesh interior pocket for small accessories such as HANS posts or visor hardware. Thick rubber feet to stand bag upright. Two comfortable rubberized non-slip carrying handles. One easily-removable rubberized shoulder strap. Convenient business card window to insert owner's card in case you misplace the bag. Heavy-duty zippers and durable construction for years of hassle free use in racing environments. Note 1: Helmet, HANS device, and other accessories are not included.
-10% sale
Stilo Helmet Cable for IMSA Radio Systems
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo Helmet Cable for IMSA Radio Systems $86.52 $96.13
Stilo Helmet Adapter for IMSA Radio Systems Genuine Stilo to IMSA helmet adapter cord to connect the female communication port on your Stilo Helmet to any female IMSA car harness. The short cable has a 4-inch coiled section while the long cable has a 10-inch coiled section. Stilo to IMSA Adapter Cable (4C to 4C) Details: Manufacturer: Stilo Manufacturer part number: AC0212 (short) / AC0224 (long) Helmet end: Stilo 4C Chassis end: IMSA 4C Cord type: Semi-coiled
Sold out -11% sale
Stilo Helmet Skirt
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo Helmet Skirt $153.95 $172.00
Stilo Helmet Skirt Stilo 2 layer nomex fitted helmet skirt. Fire retardant fitted helmet skirt can be used to help prevent dust and debris from coming inside the helmet. Its design keeps the skirt tight to the helmet without the use of Velcro and helps eliminate dust, smoke or flames from entering the helmet. Fits any ST5 full face helmet. SFI 3.3 approved! Features a cutout for Eject Helmet Removal tube