Longacre
Longacre Deluxe 2.5" 0-40 psi Tire Gauge
$74.99
Longacre Deluxe Tire Gauge - 2.5" - 0-40 psi by 1/2 LB
The Longacre Deluxe 2.5" Tire Gauge 0-40 psi by 1/2 lb keeps the highest value race cars at the front of the pack. The Longacre Deluxe 52-52013 is a large faced, 2.5" glow in the dark tire gauge with 1/2 lb accuracy and is a track side favorite with many teams from ChampCar to IMSA.
Longacre 0-40 psi Deluxe Gauge Features:
Manufacturer: Longacre
Manufacturer part number: 52013
Gauge Face Size: 2 1/2"
Pressure Range: 0 - 40 psi
Dial Increments: 1/2 lb
Accuracy: 2%
Bleed off: Yes
Holds Pressure: Yes
Includes both angle and ball chucks: Yes
Hose Length: 17"
Internal damper: Yes
Longacre
Longacre Standard 2" Tire Gauge 0-60 by 1 lb
$36.99
Longacre Standard 2" Tire Gauge 0-60 by 1 lb
The Longacre Standard 2" Glow In The Dark Tire Gauge 0-60 by 1 lb is a track side favorite, Small and compact to fits in most glove boxes, but still give accurate readings in all light conditions.
Longacre Standard 2" Tire Gauge 0-60 by 1 lb Details:
Manufacturer: Longacre Racing
Manufacturer Part Number: 52004
Air pressure release button: Yes, qty one
Internal gauge damper for more accurate readings and longer life
Flexible 14" hose with angle chuck installed - also includes ball chuck
2" Glow-In-The-Dark dial face
Quick Compare
Part Number:
52004
52003
53006
Style:
Analog
Analog
Digital
Range:
0-60 psi
0-60 psi
0-60 psi
Size:
2"
2 1/2"
2"
Increments:
1 lb
1/2 lb
.2 lb
Accuracy:
1 lb / 2% mid
1 lb / 2%
.6 lb / 1%
Hose Length:
14"
17"
14"
Chuck:
Angle & ball
Angle & ball
Angle & ball
Holds Pressure:
No
Yes
No
GID / Backlight:
GID
GID
None
[img-1739-left-large_default]
Longacre
Longacre 17" Replacement Mirror
$52.99
Longacre 17" Replacement Mirror
Longacre Wide Angle 17" Racecar Replacement Rear View Mirror. Now you can easily see not just behind you, but in the hidden spots even with your quarter panel in the deepest of brake zones.
LONGACRE 17" MIRROR DETAILS:
Manufacturer: Longacre
Manufacturer Part Number: 22547
Style: Panoramic / Convex
Size: 17"
Housing: Aluminum/ABS Plastic
For a bigger and better field of rear vision, replace your factory rear view mirror with one of these 17" Panoramic mirrors from Longacre Racing. These mirrors are also a direct replacements for those in Longacre Racing's mirror kits.
Longacre
Longacre 14" Replacement Mirror
$43.99
Longacre 14" Replacement Mirror
For a bigger and better field of rear vision, replace your factory rear view mirror with one of these 14" Panoramic mirrors from Longacre Racing.
These mirrors are direct replacements for those in Longacre Racing's mirror kits.
Longacre 14" Mirror Details:
Manufacturer: Longacre
Manufacturer part number: 22544
Housing Material: ABS Impact Plastic
Mirror Material: Optically correct convex (panoramic)
Longacre
Longacre Tire Marking Pen 50882
$11.99
Longacre Tire Marking Pen 50882
Longacre Tire Marking Pen To Mark Your Race Tires With Position or Number Of Runs.
Longacre Tire Marking Pen Details:
Makes a finer line, easy to read
Mark tire sizes, pressures, etc.
Silver marking won't come off due to heat
Manufacturer: Longacre
Manufacturer Part Number: 50882
Color: Metalized Silver
These markings are not easily removable! If you write on a tire "No Grip - Worst Tire Ever" it will be pretty hard to sell on an internet forum. You have been warned.
[img-1818-left-large_default]
Longacre
Longacre Magnum 3" 0-60 psi Tire Gauge
$109.99
Longacre Magnum 3" GID Tire Gauge 0-60 by 1/2 lb
The Longacre Magnum 3" Tire Gauge 0-60psi by 1/2 lb keeps the highest value race cars at the front of the pack.
Longacre Magnum 3" 0-60 psi Tire Gauge Details:
Manufacturer: Longacre
Manufacturer part number: 52001
Huge 3 1/2" Glow-in-the-Dark face for high accuracy and the easiest readability
Dual bleed buttons for faster setting
1/2 lb increments with 2% accuracy
Swivel angle chuck installed with alternate ball chuck included
Holds pressure until released
Internal gauge damper for more consistent, accurate readings
Flexible 17" red hose
Comes with silver case
The Longacre Magnum 52001 is a large faced, 3" glow in the dark tire gauge with 2% accuracy and is a track side favorite with many teams from ChampCar to SRO.
RaceQuip
RaceQuip Adjustable Window Net Straps
$44.95
RaceQuip Adjustable Window Net Straps
These Racequip bottom bar strap on window net mount kits are designed to hold the window net bottom bar in place. They include six, 1.5 in. nylon straps and six 3-bar heavy duty drop forged slides that are adjustable from 8 to 18 in. lengths. The straps can follow the contour of an angled door bar.
RaceQuip Adjustable Window Net Strap Details:
Manufacturer: Racequip
Manufacturer part number: 705005
Color: Black
Qty in kit: 6
Longacre
Longacre 1 3-4" Helmet Hook
$27.99
Longacre 1 3/4" Helmet Hook
Longacre Helmet Hooks keep your race helmet off the floor and safe from scratches and damage. The Longacre 22570 Helmet Hook fits perfectly on all 1.75" (1 3/4") roll bars and will last many years with its durable anodized finish.
Longacre 1 3/4" Helmet Hook Details:
Manufacturer: Longacre
Manufacturer Part Number: 22570
Material: CNC Machined Billet Aluminum
Finish: Black anodized
Mount Diameter: 1.75"
Protect your helmet
Bolts onto your roll bar - no welding (choose size above)
Lightweight billet aluminum - black anodized
Allstar Performance
Allstar Brake Bleeder Bottle Kit With Lanyard
$22.95
Bleed Your Brakes and Contain The Mess!
Contain the mess of bleeding brakes by capturing fluid in this 16oz. bottle with a 12" long hose which attaches to most bleeder screws. The removable cap has a built-in fitting to secure the hose during storage to help prevent spills and a steel lanyard retainer that suspends the bottle from a chassis or suspension component during bleeding.
The bottle features a coated stainless lanyard that's great for hanging the bottle right where you need it, and it stores away easily in your tool box when you're done. The no-leak design makes clean-up and storage easy.
Allstar Brake Bleeder Bottle Kit w/ Lanyard Details:
Manufacturer: Allstar Performance
Manufacturer part number: 11019
Brake Bleeder Hose Included: Yes
Capacity: 16 oz.
Longacre
Longacre Toe Plates with Magnets
$84.99
Longacre Toe-In Plates with Magnets
The Longacre 52-79501 Toe-In Plates use magnets to hold the far end of the tape measure securely while you read the close-end measurement. Simple and easy to store in the spares kit, Longacre toe plates are a trackside must have. Longacre Toe Plates keep the highest value race cars at the front of the pack. Longacre Toe-In Plates with Magnets (pair) is a track side favorite with many teams from ChampCar to Grand-Am.
Longacre Toe Plates with Magnets Details:
Manufacturer: Longacre Racing
Manufacturer Part Number: 52-79501
Quickest and simplest way to measure toe-in
Rest one of these plates against the tire on each side and measure toe directly using the 2 tapes (included)
Formed design is rigid for accuracy and stays put against the tire
Magnets hold tape in place
Dimensions: 23 1/2" x 9"
[img-5557-left-large_default]
How to use Longacre Toe Plates:
This is a fast way to check / set front end toe. It is affected by wheel or tire runout. Be certain wheels run true and tires have no bulges.
Turn wheels to straight ahead: Should be done on level ground. Set caster & camber first.
Lean plates up against wheels: Folded lip goes to the outside. Be sure the entire plate is up against the wheel.
Measure front width, then rear: Use the slots for the tape measure. Subtract one from the other for toe. Larger front width means toe-out.
[img-2164-left-large_default]
Longacre
Longacre Complete Drink Kit 1.75"
$99.95
Longacre Complete Drink Kit - 1.75"
Complete Longacre Drink kit for 1.75" roll bar. This complete Longacre Drink Holder & insulated bottle with extra length drink hose & bite valve keep you hydrated during those hot summer or long races.
Longacre Complete Drink Kit 1.75" Details:
Manufacturer: Longacre
Manufacturer Part Number: 22551
Large capacity(42oz) double insulated bottle with tube
Includes "bite valve" to avoid leaks from tube
Bolts onto your roll bar - no welding required (choose size above)
Lightweight powder coated aluminum
Longacre Part Number: 22551
Roll Bar Diameter Mount Clamp: 1.75"
Longacre
Longacre Complete Drink Kit 1.5"
$99.95
Longacre Complete Drink Kit 1.5"
Complete Longacre Drink kit for 1.5" roll bar. This complete Longacre Drink Holder & insulated bottle with extra length drink hose & bite valve keep you hydrated during those hot summer or long races.
Details:
Large capacity(42oz) double insulated bottle with tube
Includes "bite valve" to avoid leaks from tube
Bolts onto your roll bar - no welding required (choose size above)
Lightweight powder coated aluminum
Longacre Part Number: 52-22553
Roll Bar Diameter Mount Clamp: 1.5"
Longacre
Longacre 1 1/2" Helmet Hook
$27.99
Longacre Helmet Hook - 1.5"
Longacre Helmet Hooks keep your race helmet off the floor and safe from scratches and damage. The Longacre 22572 Helmet Hook fits perfectly on all 1.5" (1 1/2") roll bars and will last many years with its durable anodized finish.
Longacre 1 1/2" Helmet Hook Details:
Manufacturer: Longacre
Manufacturer Part Number: 22572
Material: CNC Machined Billet Aluminum
Finished: Black anodized
Mount Diameter: 1.5" Protect your helmet
Bolts onto your roll bar - no welding
Lightweight billet aluminum - black anodized
Allstar Performance
Allstar Brake Bleeder Bottle Kit With Magnet
$22.95
Contain The Mess Of Bleeding Your Brakes!
Bleeding brakes is a lot cleaner and easier with the Allstar Brake Bleeder Bottle Kit. This rugged magnet-mounted bottle features a no spill/no leak hose storage bung and bottom tube fluid entry. The 12" tube fits over most brake bleed screws
The large 16 oz. bottle holds twice the fluid as most other bottles, allowing more flushes before having to empty it. The magnet-mounted bottle easily sticks to your steel chassis parts, brake rotor, or multiple locations on the vehicle and stores away easily in your tool box. No-leak design for storage makes clean-up easy.
Allstar Brake Bleeder Bottle Kit w/ Magnet Details:
Manufacturer: Allstar Performance
Manufacturer part number: 11018
Brake Bleeder Hose Included: Yes
Capacity: 16 oz.
AeroCatch
AeroCatch 120 Series Flush Mount Hood Pins
$85.95
AeroCatch 120 Series Flush Mount Hood Pins
AeroCatch are installed on some of the fastest race cars on the planet. From Spec Miata to Daytona Prototype, AeroCatch hood pins are every race track every weekend.
AeroCatch 120 Series Plus flush mount hood pin kits consist of lightweight, high-strength glass-reinforced thermoplastic housings containing a hinged, spring-loaded stainless steel pin. This pin engages with the aluminum hood pin forming a secure latch. Compact and aerodynamic, Aerocatch Flush Mount Hood Pins are modern replacements for conventional hood pins, door latches and more. The 120 series are designed to be fitted from above the panel and include a cardboard template to ensure precise cutting and drilling.
Each AeroCatch 120 Hood Pin Kit includes two thermoplastic AeroCatch bodies, two nut fixing plates, two red aluminum strike pins, two rubber bump stops, all necessary fasteners, and an arrow sticker set. Keep your hood, trunk, tailgate, or bonnet shut at high speeds with a set of AeroCatch 120 Series Flush Mount Hood Pins.
AeroCatch 120 Series Flush Mount Hood Pins Details:
Manufacturer: AeroCatch
Manufacturer part number: 120-2000
Hood pin length: 126mm (~ 5.0")
Mounting: above panel
Mount location: top- or side-mount
Hood pin style: flush mount
Hood pin body finish: black