Sparco Superleggera Race Suit (DISCONTINUED COLORWAYS) The Sparco Superleggera race suit is the lightest FIA 8856-2018 approved suit on the market. The Superleggera is not only lightweight, it's also one of the most comfortable race suits available at any price. It features a special four-way stretch panel that runs from each underarm down to the hip. These side stretch panels, combined with a generous rear stretch panel, give the driver the ultimate in flexibility and range-of-motion when in a seated position. The Sparco Superleggera fire resistant auto race suit also has a breathable inner-thigh stretch panel, 360º floating arm gussets, and pre-curved arms and legs. The Sparco Superleggera auto race suit is both FIA and SFI homologated. SPARCO SUPERLEGGERA RACE SUIT TECHNOLOGY FIA 8856-2018 homologated SFI 3.2A/5 approved Lightest FIA suit on the market Pre-curved arms and legs Lightweight zipper and collar Inner-thigh stretch panel Four-way stretch panels strategically placed throughout SKU 001142

Sparco Superleggera Driver Race Suit The Sparco Superleggera is the lightest FIA 8856-2018 homologated race suit on the market today. Beyond the Superleggera being extraordinarily lightweight, it is also one of the most comfortable race suits available at any price. The Sparco Superleggera features a special four-way stretch panel that runs from each underarm down to the hip. These side stretch panels, combined with a rear stretch panel, give you the ultimate in mobility and freedom of movement, especially in the seated position. The Sparco Superleggera race suit also has a breathable inner thigh stretch panel, 360º floating arm gussets, and pre-curved arms and legs. It all adds up to unsurpassed comfort to go with the Superleggera's FIA and SFI approved safety. SPARCO SUPERLEGGERA DRIVER RACE SUIT DETAILS FIA 8856-2018 homologated SFI 3.2A/5 approved Lightest FIA suit on the market Pre-curved arms and legs Lightweight zipper and collar Inner-thigh mesh stretch panel Four-way mesh stretch panels on both sides and up the back SKU: 001142

Sparco Gulf Racing Driver Suit The Golden Age of Endurance Racing Brought Back to Life! In the golden years of endurance racing, Sparco and Gulf Racing contributed to the triumphs of the best racing drivers in the world. Now this partnership is renewed, and fans of the Gulf Racing historical livery have access to beautiful re-creations of the original Sparco products. All of Sparco's Gulf Racing reproductions have been updated with the newest Sparco safety technology and carry current FIA homologations. Classic Racing Heritage Meets Modern Technology The Sparco Gulf Racing Replica Race Suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability, and comfort when compared to the original worn back in the day. The suit features iconic Gulf Racing embroideries and patches to faithfully recreate the original look. The Gulf Racing replica race suit is made from Sparco's latest generation fabrics, offering a soft, lightweight outer fabric and breathable inserts at the sides, plus a large lower-back stretch panel for maximum comfort. The Sparco Gulf Racing Replica Race Suit also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and Sparco's signature epaulettes. Available in sizes EU48 - EU66. Sparco Gulf Replica Race Suit Details: Gulf Racing embroideries Lightweight three-layer fabric Pre-curved arms  Lightweight zipper and collar Breathable stretch panels FIA 8856-2018 approved Suit only (shoes, helmet, gloves, balaclava, house and car not included)

Sparco Stealth RF Carbon | FIA 8859-2024 / SA2025 The Sparco Stealth RF Carbon Helmet is built for racers who demand elite protection and comfort at the highest levels of motorsport. With a lightweight carbon fiber shell that exceeds the newest FIA 8859-2024 and Snell SA2025 standards, it delivers unmatched strength and energy absorption without the bulk. Sparco’s advanced ventilation system keeps you cool under pressure, while the fire-retardant, removable linings ensure lasting comfort throughout endurance sessions. Every detail of this helmet is engineered to perform—ready to race straight out of the box with factory-installed HANS/FHR posts. Pure Carbon Performance. Pure Racing Focus. Sparco Stealth RF Carbon Features Lightweight Carbon Fiber Shell: Constructed from ultra-strong carbon fiber to minimize neck fatigue and maximize protection while maintaining an optimal weight balance. Efficient Ventilation System: Multiple air intakes on the chin bar and top, combined with rear exhaust ports, help regulate airflow and reduce heat build-up during long stints. Removable Fire-Retardant Linings: Easily removable and washable interior linings keep your helmet fresh and race-ready. Optional Drink System Compatibility: Integrated ports make it simple to connect an optional hydration system for endurance events. 3-Position Adjustable Visor: Adjustable visor positions provide tailored airflow and visibility for varying track conditions. Central Locking Visor Mechanism: The secure locking system ensures a firm seal and reliability at high speeds. Factory-Fitted FHR Posts: Supplied ready for HANS/FHR use, meeting professional racing safety standards. Dual Shell Sizes: Available in two shell sizes for precise fit and comfort. Seven Size Options: Covers a wide range of head sizes to achieve a perfect racing fit. Certifications: FIA 8859-2024 and Snell SA2025 approved for use in professional and amateur motorsport worldwide. Sparco Stealth RF Carbon FAQs Is the Sparco Stealth RF Carbon legal for FIA-sanctioned events? Yes, it meets FIA 8859-2024 and Snell SA2025 standards, making it approved for all major motorsport disciplines. Does this helmet include HANS posts? Yes, it comes pre-installed with factory-fitted FHR (HANS) posts, ready for immediate use. What sizes are available? The Stealth RF Carbon is offered in seven sizes across two shell molds, ensuring optimal comfort and fit. Can I add a drink system? Yes, the helmet is pre-configured for an optional drink system setup, ideal for endurance and GT racing. How do I clean the interior? The interior fire-retardant linings are removable and washable, allowing easy maintenance between races. Take your racing experience to the next level with the Sparco Stealth RF Carbon Helmet — precision-built for uncompromised safety, cooling, and performance lap after lap.

Sparco Pro ADV QRT Racing Seat The Sparco Pro-ADV competition seat is the result of a collaborative partnership between Sparco and FIA. The goal was to identify ways to improve safety. The results are new levels in ergonomics, materials and above all safety, are all found in the Sparco Pro-ADV seat. Increased rigidity and the use of impact-absorbing materials are the major advances found in the Sparco Pro-ADV.  The Sparco ADV QRT holds the title of Sparco's Best head-restraint seat. Sparco has offered the Pro ADV for many years, but the latest update to the Pro ADV QRT is that it receives Sparco's QRT Ultra-Light Technology, offering an industry unmatched strength-to-weight ratio for fiberglass composite seats. The head restraint shape has been tweeked to better fit smaller cockpits, while the overall seat dimensions still fit Medium-to-Large drivers up to a 35" waist. The new Sparco PRO ADV QRT is an upgraded evolution of the original Sparco PRO ADV. The new PRO ADV QRT features a new head restraint redesign that allows better fitment with vehicles with smaller cockpits. The Sparco PRO ADV QRT will fit a medium/large size driver (up to 35 inch waist). The Sparco Pro ADV QRT is made with all-new QRT Technology which results in an ultra-light shell. The Sparco Pro-ADV QRT is FIA-approved. WHAT IS SPARCO QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. SPARCO PRO ADV QRT RACING SEAT TECHNOLOGY QRT Ultralight fiberglass composite shell Excellent head and shoulder protection Special non-slip fabric for shoulders and bottom cushion Excellent ergonomics Fire retardant fabric FIA approved SPARCO PRO ADV QRT RACING SEAT DIMENSIONS

Sparco Circuit / Circuit II QRT Racing Seat    The Sparco Circuit QRT is an ultra-light competition seat specifically designed for circuit use. Made from aramadic fiber-reinforced fiberglass with all-new QRT technology, the Sparco Circuit QRT has an ultra-light shell. The Sparco Circuit QRT includes integrated bolsters to protect the head. This seat can be used with a Hans device for even greater protection. The ultra-light shell is then wrapped in an impact-absorbing and fire retardant fabric that helps hold the body.  The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. The Sparco Circuit QRT is FIA approved and available in two sizes: Circuit QRT (Standard) and Circuit II QRT (Large). SPARCO QRT TECHNOLOGY QRT technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT technology gives an average weight savings of 30% when compared to standard fiberglass technology. The main benefit is that QRT seats approach weight of carbon fiber seat at the price of a fiberglass composite seat. Sparco Circuit QRT Race Seat Technology QRT technology – 30% weight savings Ultra-light Aramadic fiber-reinforced fiberglass shell Integrated head bolsters for greater safety HANS device compatible Fire retardant fabric FIA approved The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. Sparco Circuit QRT Fiberglass Racing Seat Details Manufacturer: SparcoManufacturer part number: 008019RNRRating: FIA 8855-1999Mounting: SideWeight: Shell Only: 19.73lbsHans CompatibleUltra-light Aramaic fiber-reinforced fiberglass shellIntegrated head protectionNo-slip fabric for shoulders and bottom cushionSmooth and slim backrest for high lateral supportPre-shaped thigh cushion helps separate the driver's legsSelf-extinguishing fabric   Sparco Circuit QRT Race Seat Dimensions

X-20 Drag Racing Suit: Lightweight Protection for High-Speed Action! Ready to feel invincible on the drag strip? Enter the X-20 Drag Racing Suit—a blend of protection, comfort, and style that doesn’t mess around when it comes to keeping you safe at top speed. This isn’t your average suit; it’s a 7-layer fortress of protection made from our exclusive X-Light fabric. Whether you’re flooring it in a Top Fuel dragster or just trying to shave milliseconds off your ET in a door-slammer, the X-20 has you covered—literally. Features that Speak for Themselves (and Maybe Even Yell "GO!") SFI 3.2A/20 Approved – Translation: This suit is built to handle extreme heat and impact, meeting the highest safety standards in the sport. Exclusive X-Light Fabric – It’s like wearing a cloud that’s been beefed up for battle. You get breathability and flexibility without giving up protection. Fully Floating Sleeves – Mobility matters when you’re strapped in, so we’ve got you covered with sleeves that let you steer, shift, and fist pump when you crush that quarter-mile. Expandable Waist & Internal Knitted Cuffs – Because comfort matters. A stretchy waist and snug cuffs make sure this suit fits just right, so you can focus on hitting the throttle. One Piece or Two? – Choose between a single-piece overall or a two-piece jacket and pants set. Either way, you’re winning in style. Let’s Get Specific SFI Rating: 3.2A/20 Material: 7 layers of X-Light fabric Design: Box-quilt stitching for extra durability Options: Available as a one-piece suit or two-piece jacket and pants set Size Range: (Insert size details here) – Fits like a glove… that’s also fireproof. FAQs AnsweredQ: Is the X-20 suit fireproof?A: You bet! With its SFI 3.2A/20 rating, this suit can withstand intense heat, protecting you from the fire risks inherent in drag racing. Q: Can I wash my X-20 suit at home?A: Not quite. Due to the specialized materials and construction, you’ll want to have this suit professionally cleaned to maintain its protective properties. Q: How should the X-20 fit?A: Think snug, but not restrictive. The expandable waist and internal cuffs will help it conform to your body while allowing freedom of movement where you need it most—like your arms and legs. Q: Is this suit approved for professional drag racing?A: Absolutely! The X-20 meets SFI 3.2A/20 standards, so you’re race-ready whether you’re competing in sanctioned events or just breaking personal records. Call to ActionSo, are you ready to suit up and unleash your inner speed demon? The X-20 Drag Racing Suit is built for the bold, for the racers who want to feel light, move fast, and stay protected. Don’t just imagine yourself crossing the finish line—make it a reality. Get your X-20 Drag Racing Suit today and feel the difference between a race and a victory!

Sparco Prime LT Race Suit (Limited Edition) The Sparco Prime LT race suit is a limited edition suit available only for the US market. The Prime LT design features two unique colorways. This limited edition suit was only made available for a single year in 2021. The Sparco Prime LT race suit is the same suit material developed for the McLaren F1 team and is one of the lightest FIA approved racing suit in the world. The Prime LT race suit has unparalleled technological features created in the Sparco R&D laboratories. This project involved optimizing every detail of the suit in terms of material and construction. Details such as an ultra slim zipper, soft & seamless Nomex/Vicosa wrist and ankle cuffs, neck and shoulder pads further reduced, thinner thread used and stitching flattened even more. The Sparco Prime LT race suit features a three-layer construction using proprietary Sparco technology. The third, outer layer is a double-faced mesh made from original DuPont Nomex Comfort, an innovative fabric that delivers both extreme protection and maximum comfort, woven using the Kompact® system. This material contains a high percentage of antistatic fibers, giving it extremely effective antistatic properties as well as exceptional breathability. The Sparco Prime LT race suit weighs from 240 to 270 grams per square meter (depending on size). SPARCO PRIME LT RACE SUIT TECHNOLOGY Lightest FIA approved suit in the world Exclusive DuPont Nomex Comfort fibers provide superior fire protection and comfort Pre-curved arms and legs Lightweight zipper and collar Breathable stretch panels FIA 8856-2000 approved SKU 001133U

Sparco Pro 2000 QRT Martini Racing Seat SIZE: Medium (up to a 34” waist) The Sparco Pro 2000 QRT Martini Racing Edition is a limited production seat. It features the Iconic Martini Racing stripes and is available in period correct Navy or Grey. The Sparco Pro 2000 QRT Martini Edition is designed for a medium size driver with a waist size up to 34 inches. The Pro Sparco 2000 QRT Martini Edition is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Sparco Pro 2000 QRT Martini Edition is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Sparco Pro 2000. The Sparco Pro 2000 QRT Martini Edition is a unique FIA seat as it can be bottom mounted in addition to the traditional side mounting. This gives additional installation options. EVOLUTION OF AN ICON:  The  Sparco Pro 2000 QRT Martini Edition The Sparco Pro 2000 QRT is an evolution of Sparco's iconic Pro 2000 seat. The Sparco Pro 2000 QRT has been upgraded with new ergonomics and technology. It is designed for a medium size driver with a waist size up to 34 inches. The Sparco Pro 2000 QRT is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Sparco Pro 2000 QRT is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Sparco Pro 2000 QRT is FIA approved. WHAT IS SPARCO QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio, generating the lightest fiberglass composite seat shells currently on the market. In fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. The  Sparco Pro 2000 QRT Martini Edition Technology QRT ultra-light fiberglass composite shell Excellent fitment into small cockpits Adjustable lumbar cushions Excellent ergonomics Fire retardant fabric FIA approved The  Sparco Pro 2000 QRT Martini Edition Dimensions

Sparco AIR-15 Drag Suit: Lightweight Protection for Your Fastest Runs When it’s you against the quarter-mile, every millisecond counts—and the Sparco AIR-15 Drag Suit is here to help you shave off time while keeping you cool, comfortable, and, most importantly, protected. As the lightest and most breathable SFI 15-rated drag racing suit on the market, the AIR-15 gives you the edge to leave your competition in the dust. Maximum Protection Without the Bulk Let’s face it: drag racing is about speed, precision, and leaving your rivals in awe. The AIR-15 is made from Sparco’s exclusive X-light multi-layer fabric, offering a perfect balance between weight and protection. You’ll feel like you’re wearing a second skin instead of a suit, but with all the safety of an SFI-approved armor. It’s rated SFI 3.2A/15, which means you get top-tier fire resistance without the bulk. Because in drag racing, the only thing that should be heavy is your foot on the gas. Precision Fit for Precision Driving Whether you’re pulling G’s off the line or cruising back to the pits, the AIR-15 has been designed with drag racers in mind. The suit comes in both a one-piece overall and a two-piece jacket and pants set, so you can choose the fit that works best for your racing style. Plus, features like fully floating sleeves, internal knitted cuffs, and an expandable waist ensure maximum mobility. So, when you’re making those split-second shifts or lining up the perfect launch, you won’t feel held back by your gear. Bonus points? This suit includes SFI-approved sewn-on arm restraints, so you’ll stay safe and secure without sacrificing flexibility. Sparco AIR-15 Drag Suit Key Features X-Light Multi-Layer Fabric: Unmatched comfort and breathability while providing SFI 3.2A/15 fire protection. Available in One-Piece or Two-Piece Sets: Choose the style that best suits your needs—either a single overall (in black only) or a jacket and pants combo (with a black or grey jacket). Fully Floating Sleeves and Expandable Waist: Designed to move with you, not against you, for full control on the strip. SFI-Approved Arm Restraints: Stay locked in safely during your run. Internal Knitted Cuffs: Keep everything snug while preventing unwanted shifts or movement during high-speed runs. Pants only available in Black  Frequently Asked Questions (FAQ) 1. Is the AIR-15 suit legal for competitive drag racing?Absolutely! The AIR-15 meets the SFI 3.2A/15 standard, which is required for high-speed drag racing events. You’ll be protected and compliant at all your races. 2. What’s the difference between the one-piece and two-piece options?The one-piece is perfect for those who prefer seamless protection, while the two-piece gives you the flexibility to remove the jacket between runs. Both options offer the same high level of protection and comfort. Ready to Feel the Thrill? The Sparco AIR-15 Drag Suit is your ultimate companion for the drag strip. Offering unparalleled comfort, protection, and style, it’s designed for drag racers who take their craft seriously—and want to look good while doing it. Order now and get ready to launch your racing game into overdrive!

Sparco Circuit II QRT Sim Racing Seat – Maximum Comfort for Serious Sim Racers! *NON FIA or SFI* Calling all larger sim racers! The Sparco Circuit II QRT Sim Racing Seat is here to level up your virtual racing experience. Designed for those who need a little extra room, this seat combines Sparco’s top-notch QRT Technology with unparalleled comfort, so you can dominate the virtual track without sacrificing a shred of performance. Built with an ultra-light aramidic fiber-reinforced fiberglass shell, the Circuit II QRT is wider, comfier, and tougher than ever before. Whether you’re in the final lap of a marathon sim race or just warming up, this seat’s deep side bolsters and integrated head bolsters will keep you locked in tight. It’s like having a personal pit crew for your sim racing setup! Why You Need This Sparco Circuit II QRT (SIM) Seat QRT Technology – Cutting-edge tech for a seat that’s 30% lighter but just as strong as heavier models. Wider shell for large sim racers – Accommodates drivers with up to a 36” waist comfortably. Integrated head bolsters – Keeps you safe and supported during intense sim racing battles. Deep side bolsters for enhanced lateral support – No more sliding around when the action heats up! Fire retardant, non-slip fabric – Built for long hours of sim racing without any discomfort or slippage. Comfort Built for Extended Sim Racing Sessions Whether you’re gunning for the podium in an online tournament or simply cruising through your favorite sim game, the Circuit II QRT has your back—literally. Its wider design provides extra room for larger sim racers, and with its advanced ergonomic construction, you’ll stay comfortable for hours. (No pit stops necessary.) Sizing Info Sparco Circuit II QRT (SIM) Large: Fits drivers with up to a 36” waist. Finally, a sim seat for the big dogs! The QRT Advantage – What Makes It Special? Sparco’s Quick Resin Technology (QRT) is the future of sim racing seats. Developed in Sparco’s Italian lab, QRT reduces the weight of the seat by 30% compared to traditional models, while still maintaining unbeatable strength. Translation? You’ll feel more connected to your rig and less bogged down by extra weight. Plus, it looks super cool. Sparco Circuit II QRT (SIM) FAQs Is this seat compatible with my sim racing rig? Absolutely! The Circuit II QRT is designed to work with most sim racing rigs. Its wide shell and adjustable harness slots mean it’ll fit snugly into your setup. How durable is the fabric? The fire retardant and non-slip fabric ensures you stay in control during every race. It’s built to withstand even the sweatiest gaming marathons. Is this seat comfortable for long gaming sessions? Yes! The deep side bolsters and supportive design make it ideal for hours of uninterrupted sim racing without sacrificing comfort. Ready to Crush Your Next Sim Race? Upgrade your sim racing experience with the Sparco Circuit II QRT Sim Seat—built for larger drivers, designed for maximum comfort, and engineered to deliver performance. Click ‘Add to Cart’ now and leave your competition in the dust!

Sparco Victory Driver Race Suit FIA 8856-2018 The lightweight and breathable Sparco Victory 2023 racing suit is feature packed with lightweight HOCOTEX® fabric construction, comfort stretch panels, and is dual SFI 3.2A/5 and FIA 8856-2018 homologated. Built in Italy with pride, the new lightweight and breathable Sparco Victory race suit brings the performance of competitor's suits that are double the price to weekend racers. It's hard to improve on a classic, but Sparco has done just that with the updated Victory racing suit! Built from the popular Victory racing suit that brought HOCOTEX® technology to this price point. Largely keeping the popular Victory classic design with modern color options, the new Victory race suit takes things a step further with an improved cut, style, and fit. An improved stretch panel on the lower-back further improves mobility, while preformed sleeves maintain excellent steering performance. Sparco's unique HOCOTEX® technology makes use of an intricate honeycomb structure that contains thousands of protective microcapsules built into a super-thin and breathable fabric weave. Twice as breathable as other entry-level suits, these insulating compartments replace the multi-layer fabric construction found in every other suit on the market, all while maintaining dual SFI 3.2A/5 and FIA 8856-2018 certifications for zero compromises in protection! SPARCO VICTORY RACE SUIT DETAILS FIA 8856-2018 and SFI 3.2A/5 homologated Soft, lightweight, and twice as breathable as a standard multi-layer suit Single-layer comfort with multi-layer protection Hidden front pockets Fully-floating pre-formed sleeves with stretch panels Additional stretch gusset in the shoulders and armpits Three years of research and development HOCOTEX® patented Sparco technology Made in Italy The only single-layer SFI 3.2A/5 suit on the market

Sparco Pilot QRT Racing Seat The Sparco Pilot QRT is the largest composite seat on the market. It was designed to accommodate a larger as well as a taller driver. The Sparco Pilot QRT is made with all-new QRT Technology which results in an ultra-light shell which is important with such a large seat. The Sparco Pilot QRT has integrated head bolsters to protect the head and deep side bolster for maximum lateral containment. This seat can be used with a Hans device for even greater protection. The ultra-light shell is then wrapped in an impact-absorbing and fire retardant fabric that helps hold the body. The Sparco Pilot QRT is FIA approved. Sparco Pilot QRT Fiberglass Racing Seat Details Manufacturer: SparcoManufacturer part number: 008018RNRRating: FIA 8855-1999Mounting: Side HANS compatible QRT Ultralight fiberglass composite shell Designed for a large driver (widest and tallest Sparco seat)Excellent ergonomicsFire retardant fabricSpecial non-slip fabricFIA approved WHAT IS SPARCO QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco Pilot QRT Racing Seat TECHNOLOGY QRT Ultralight fiberglass composite shell Designed for a large driver (widest and tallest Sparco seat) Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved Sparco Pilot QRT Racing Seat DIMENSIONS