Sparco

Discovery Parts Sparco Pro-Am Racer Suit/Shoes/Gloves Package Get the Discovery Parts Performance Racing Backpack free with this expertly curated Sparco safety apparel package! Package Price: $1477.00 in cart RACING HELMET (PICTURED) NOT INCLUDED Comprised of the Sparco's premium Eagle LT fire suit, Skid racing shoes, Arrow racing gloves, and Discovery Parts Performance Racing Backpack to help keep it all together. This package is designed for the serious racer who demands very high performance, lightweight comfort, and advanced safety features. The Discovery Parts Performance Racing Backpack makes it easy to tote your helmet and other essential gear to and from the paddock! (Helmet not included.) SPARCO EAGLE LT FIRE SUIT The Eagle LT is a limited edition suit available only for the US market. The Eagle LT features an all-new design in two colorways. This is a limited edition suit, only available for 2021 (while supplies last). The Eagle LT is the result of over 3 years of research and development. Sparco has patented a new technology called HOCOTEX® which revolutionizes the way racing suits are made. This new exclusive Sparco technology creates a single layer fabric which has the protection of what is normally achieved by a multi-layer fabric. The Eagle LT is FIA approved. Thanks to HOCOTEX®, the Eagle LT is three times more breathable than a suit produced using traditional technology. The use of this relatively thinner fabric along with large side and back stretch panels and 360 degree arm gussets give the Eagle LT ultimate flexibility and comfort. The Eagle LT uses at new stretch material called Eagle fabric. This Eagle Fabric is lighter, more breathable and abrasion resistant than the traditional stretch material. Traditional racing suits have layers of fabric sewn together with a quilted pattern. The quilting provides air space between the layers which bloats in a fire, this provides thermal protection to the driver. HOCOTEX® creates a honeycomb structure with internal air cells that ensure the driver even more fire protection. Traditional box quilting creates an average of 300 air chambers in a size 52 suit. The Eagle LT has over 60,000 microcell air chambers which provide a 10 to 12% increase in heat protection performance. SPARCO SKID SHOES The Skid driving shoe is a lightweight, unique design that has genuine ultra-soft leather upper with an offset closure system without a traditional shoe tongue. This design feature moves the potential pressure point of traditional laces from the top of your foot to the side which gives unparalleled comfort. The Skid also features a stretch rear collar for flexibility. It has a comfortable cushioned inner sole and an all-new slim rubber sole that is anti-slip, anti-static, and oil and fuel resistant. All-new anti-static pure rubber outer sole features a special texture for better pedal grip. The Skid is SFI and FIA approved. SPARCO ARROW GLOVES The Sparco Arrow racing glove provides incredible grip and superior comfort. The palm is printed with high-grip HTX, a Sparco patented material that increases grip, comfort and dexterity. HTX is strategically placed for maximum steering feel and performance. Another Sparco-exclusive feature is Touch-S technology, a Touch Sensitive index finger and thumb. Sparco's patented fire resistant touch sensitive material allows you to use your touch screen data acquisition electronics or phone lap timer apps without taking off your gloves. The Arrow is ultra-lightweight with pre-curved fingers, external stitching and a unique inner thumb seam that gives unparalleled comfort on long stints. The Sparco Arrow is both FIA and SFI approved.

Discovery Parts Seat Mounting Hardware Kit (4) 8x1.25 25mm Bolts (4) 8x1.25 16mm Bolts (4) 8x1.25 Locking Nuts (8) Washers Sparco Part Numbers: 50001 and 50002 - everything you need in one place!

Simpson SFI 3.3 Junior Arm Restraints A must for Sprint, Midget, and off-road racing, Simpson Junior are restraints are SFI 3.3 certified and are designed to keep your youth driver's arms and hands inside the car in the event of an accident or rollover.  Simpson SFI 3.3 Junior Arm Restraints Details: Manufacturer: Simpson Manufacturer part number: 3600J  Colors: Black 3600JBK Blue 3600JBL, Red 3600JR Certification: SFI 3.3 Simpson SFI 3.3 Junior Arm Restraints are easily adjustable to provide freedom of movement, and are covered in flame-retardant foam and flame-retardant cloth, not cheaper nylon covered arm restraints used by other manufacturers. The cuffs and straps are made from high-strength nylon. Simpson Junior Arm Restraints are easily adjustable to provide freedom of movement. For ease of use, we use individual straps with quick release clips.

Sparco 2 Inch Alcantara Harness Pads Special memory foam harness shoulder pads covered in Alcantara suede with embroidered Sparco logo. FEATURES: Memory foam for amazing comfort. Alcantara stays in place, wears well. For use with 2-inch racing harnesses. Includes two harness pads per package.

Sparco 6 Point Racing Harness (3" Steel) Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. Our 6-point harness features 3-inch lap and shoulder straps that attach in the center using an aircraft-quality quick-release buckle with integrated anti-submarine belts. The lightweight steel adjusters allow for smooth, quick adjustments and perfect clamping. Each belt attaches to the frame using snap-on fixings. Available in pull up only. TECHNOLOGY 3" lap and shoulder straps Pull-Up lap belts Light-weight steel adjuster for smooth and quick tensioning Snap-in Kit Mounting included FIA Approved

Sparco 6 Point Racing Harness 2"/3" HANS SHOULDER BELTS W/ ALUMINUM ADJUSTERS Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. Sparco's 6-point HANS-compatible harness features 3-inch lap straps and shoulder straps that taper from 3 inches to 2 inches. This tapered design allows for the integration of a HANS device. Each strap attaches in the center using an aircraft-quality quick-release buckle with integrated anti-submarine belts. The lightweight aluminum adjusters allow for smooth, quick adjustments and perfect clamping. Shoulder and sub belts attach to your car or seat mounts using snap-on fixings and caribiner fasteners for lap belts. This harness is FIA approved. TECHNOLOGY 3" lap belt 3" tapered to 2" shoulder straps Light-weight carabiner fasteners for lap belts Pull-Up lap belts Light-weight aluminum adjuster for smooth and quick tensioning Snap-in Kit Mounting included FIA Approved Available in black, blue, or red.

Sparco Racing Seats ADV Elite Carbon The Sparco ADV Elite is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating FIA 8862-2009. This means that the ADV Elite has been tested to an impact of approximately 70G. This rating is required for WRC racing, and the ADV Elite was specially designed with an upright driving position preferred by Rally drivers. In addition to the Rally driving position, the outer dimensions have been reduced to fit into typically smaller WRC cockpits. With strength at the top of its class, the ADV Elite can withstand over 6,600 lbs. of lateral force. The ADV Elite has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric and special non-slip fabric in the shoulders and seat area. The ADV Elite is FIA approved when mounted with the Sparco #004988ADV side-mount brackets. TECHNOLOGY Ultra-light weight Carbon Fiber construction FIA 8862-2009 approved Testing to an impact of 70G Designed for WRC Rally cockpits & driver position Hans device compatible Fire retardant fabric Special non-slip fabric DIMENSIONS

Sparco ADV XT Carbon Racing Seat The Sparco ADV XT is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating, FIA 8862-2009. This means the ADV XT has been tested to an impact of approximately 70G. This rating is required for GT racing, and the ADV XT was specially designed with a more relaxed, comfortable driving position for GT cockpits. With strength at the top of its class, the ADV XT can withstand over 6,600 lbs. of lateral force. The ADV XT has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric, plus a special non-slip fabric in the shoulders and seat area. The ADV XT is FIA approved when mounted with the Sparco #0049605 side-mount brackets. TECHNOLOGY: Ultra-light weight Carbon Fiber construction FIA 8862-2009 approved Testing to an impact of 70G Designed for GT cockpits and driver position HANS device compatible Fire retardant fabric Special non-slip fabric DIMENSIONS:

Sparco Air Pro RF-5W 1977 SNELL SA2020 The Sparco helmet line is a result of over 40 years of research and development experience, including wind tunnel testing. The new range was designed to meet the requirements of the new Snell SA2020 and FIA 8859-2015 ratings. The 2020 type-approval introduces new impact requirements, the helmets need to dissipate large amounts of energy in different ways. To meet these requirements Sparco is introducing new innovations for driver safety and comfort. All shells now have layers of carbon-Kevlar for greater strength. The helmets have also been wind-tunnel tested to maximize exterior vent placement and flow. The EPS interiors and padding have also been redesigned for increased airflow and driver comfort. Sparco also introduces a new size: Medium/Large. This M/L size takes advantage of using the smaller shell which is lighter and more compact. AIR PRO 1977 The Air Pro 1977 is a painted version of the Air Pro RF-5W. This retro inspired helmet has a white base with blue or red stripes and has a clear coat painted over. The Air Pro 1977 features a carbon-Kevlar/fiberglass construction. It includes a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase circulation to a redesigned interior. The interior has channels which not only cool the driver, but has additional channels which route air towards the visor, which reduces the chance of visor fogging. Air Pro 1977 has removable, washable padding that can be repositioned for a comfortable fit. All interior seams have been removed from areas where greater pressure is exerted on the head. The Air Pro 1977 has been designed to accommodate a drink tube and an intercom system. Available in white with blue or red stripes. Sizes XS to XXL (including size M/L). Air Pro 1977 has Hans clips pre-installed. SNELL SA2020 and FIA 8859-2015 approved. TECHNOLOGY Painted Retro design Light-weight carbon-Kevlar/fiberglass construction New Medium/Large size which uses the lighter and more compact shell Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Pre-molded interior to accommodate drink tubes and an intercom system SNELL SA2020 and FIA 8859-2015 approved An effective helmet is one that fits properly. Have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head, starting at a point about an inch above the eyebrows and around a point in the back of the head that results in the largest measurement, finally wrapping back around to the front. It's a good idea to take a few measurements and order your helmet based on the largest.

Sparco Air Pro RF-5W SNELL SA2020 The Sparco helmet line is a result of over 40 years of research and development experience, including wind tunnel testing. The new range was designed to meet the requirements of the new Snell SA2020 and FIA 8859-2015 ratings. The 2020 type-approval introduces new impact requirements, the helmets need to dissipate large amounts of energy in different ways. To meet these requirements Sparco is introducing new innovations for driver safety and comfort. All shells now have layers of carbon-Kevlar for greater strength. The helmets have also been wind-tunnel tested to maximize exterior vent placement and flow. The EPS interiors and padding have also been redesigned for increased airflow and driver comfort. Sparco also introduces a new size: Medium/Large. This M/L size takes advantage of using the smaller shell which is lighter and more compact.   TECHNOLOGY Lightweight carbon-kevlar/fiberglass construction New Medium/Large size uses lighter, more compact shell Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Pre-molded interior to accommodate drink tubes and an intercom system (sold separately) Snell SA2020 and FIA 8859-2015 approved The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.