Hans

HANS Device 24 Hour Express Recertification Get your HANS (Simpson and Stilo Brand) device recertified with 24 hour turn around that includes UPS overnight return shipping. DiscoveryParts will provide a Level 2 recertification and get your HANS shiped back to you via UPS overnight shipping included to the 48 states. HANS Device 24 Hour Express Recertification Details Manufacturer: Simpson Manufacturer part number: I5044-ON SFI Spec: 38.1 Is this for HANS devices only: Yes Is this for any other brands: No DiscoveryParts is certified by Simpson Racing / HANS for all Hans devices that have a SFI 38.1 tag (silver metal foil decal) installed. All HANS SFI 38.1 Devices must be recertified every five years. Certification / Recertification example: Your device was certified or recertified in January, 2015 or earlier, it will require recertification by February 1, 2020. A Hans device passing inspection will result in a new SFI 38.1 conformance sticker punched with the date of recertification. This device will now will be valid for five years. IMPORTANT UPS does not guarantee any level of shipping priority. DiscoveryParts guarantees that we will send your device UPS overnight to your destination with UPS Overnight shipping, but UPS does what UPS does. DiscoveryParts will ship your device within 24 hours after receiving your device (Monday - Friday). HANS Device Recertification Levels Level 1: Device Inspection, replace SFI tag (included in level 2) Level 2-QC: Device Inspection, replace SFI tag, + replace Quick Click Anchor Tether system Level 2-PA: Device Inspection, replace SFI tag, + replace Post Anchor Tether system To Recertify Your Device Pay for this item and print our a copy of your paid receipt. Print and fill out this FORM Pack your device that has a silver SFI 38.1 tag on it, complete the printed out form from step 1 then ship it insured and trackable to the address on the form with a copy of your paid receipt. We will inspect your device then call you with options for recertification. Your recertified device will be shipped back to you via UPS overnight within 24 hours of receiving your device.

HANS Device Recertification Please Do Not Pre-Pay. Get your HANS device recertified in Dawsonville, GA (North of Atlanta). PLEASE DO NOT PREPAY for any certification. We will contact you with a total for the recertification. Usually only Level 2 (an SFI label and a tether) is required. HANS Device Recertification Details: Manufacturer: Simpson Manufacturer part number: I5044 SFI Spec: 38.1 DiscoveryParts is certified by Simpson Racing / HANS for all Hans devices that have a SFI 38.1 tag (silver metal foil decal) installed. All HANS SFI 38.1 Devices must be recertified every five years. DiscoveryParts can accomplish this at our store inside Atlanta Motorsports Park, trackside at one of our events, or by printing the attachment below and mailing it, along with your device, to us. If you are coming directly to our Dawsonville location with your Hans device, please call to confirm that a certified Hans inspection technician will be on site when you plan to arrive. Certification / Recertification example: Your device was certified or recertified in January, 2015 or earlier - it will require recertification by February 1, 2020. A Hans device passing inspection will result in a new SFI 38.1 conformance sticker punched with the date of recertification. This device will now will be valid for five years. HANS Device Recertification Levels: Level 1: Device Inspection, replace SFI tag $35.00 Level 2-QC: Device Inspection, replace SFI tag $35.00, + replace Quick Click Anchor Tether system $21.00 Level 2-PA: Device Inspection, replace SFI tag $35.00, + replace Post Anchor Tether system $42.00 Level 3-QC: Device Inspection, replace SFI tag $35.00, + replace rubber shoulders $75.00, + Quick Click Tether $21.00 Level 3-PA: Device Inspection, replace SFI tag $35.00, + replace rubber shoulders $75.00, + Post Anchor Tether $42.00 To Recertify Your Device: Print and fill out this FORM Pack your device that has a silver SFI 38.1 tag on it, complete the printed out form from step 1 then ship it insured and trackable to the address on the form. We will inspect your device then call you with options for recertification. Your recertified device will be shipped back to you. DO NOT PREPAY for any certification. We will contact you with a total for the recertification. Usually only an SFI label and a tether.

HANS Helmet Post Anchors HANS helmet post anchors to attach your HANS or Stand21 head-and-neck restraint to your Snell SA2015 or SA2020 helmet. (Those helmets have threaded M6 inserts molded into the helmet.) These post anchors are FIA-approved and screw right into those helmet inserts.

HANS Tether for Sport I, Adjustable, Pro Ultra, & Pro For Quick Click Anchors  Hans Device Replacement Tether For your Hans Adjustable, Pro Ultra, Sport I, and Hans Professional with Quick Click anchors. This Hans replacement tether and slider kit comes in the standard 16.5" length and others for special applications. HANS Tether for Sport I, Adjustable, Pro Ultra, & Pro For Quick Click Anchors Details: Manufacturer: Simpson Manufacturer part number: TK.1241.4 Length: Standard 16.5" / 420cm length works in most applications and is the one that comes standard with every adult device. Some race series require replacements between 2 and 5 years A great upgrade for an older fixed tether device. Kit includes one tether, two tether carriers and 4 new mount screws Length of X-Short tether from inside of both loops: 14.5" / 370cm TK12414XS Length of Short tether from inside of both loops: 15.5" / 395cm TK12414S Length of Standard tether from inside of both loops: 16.5" / 420cm TK12414 Length of Long tether from inside of both loops: 17.5" / 445cm TK12414L If you have a medium or large device, please stay with the standard 16.5" length Your device is safest with the factory installed and tested 16.5" length. If you feel you need a special length, please call us at 706-344-1235 so we can make sure you have the safest set-up.

HANS Pro Ultra / Ultralite / Sport 1 Tether Kits Replace the tether kit on your HANS Pro Ultra / Ultralite / Sport 1 if you're involved in an incident, or swap out your existing tether for a longer or shorter one. For use with Sliding tethers and post anchors only.

HANS Pro Ultra Lite The Ultimate Carbon Fiber HANS Device The HANS Pro Ultra Lite 20 Degree is both SFI 38.1 and FIA approved. With aerospace-grade carbon, the HANS Pro Ultra Lite Head Restraint is over 100 grams lighter compared to its Ultra counterpart. Not only does it save on weight, its smaller size helps with entry and exit from even smaller, tighter racecars. The HANS Device Pro Ultra Lite Head Restraint is constructed of 100% carbon fiber with a hollow core for increased weight reduction without sacrificing strength. Its sliding tethers offer superior visibility for the driver. Includes HANS posts (button-style) for your SA2015 helmet. Discovery Parts carries only dual-certified FIA/SFI HANS devices to ensure all customers are getting a HANS device that will work with their sanctioning body.

HANS Quick Click Anchors Quick Click Anchors feature pull strings for fast release Pull strings have velcro patches sewn onto ends

HANS Sport II Device Replacement Tether For Quick Click Anchors  Hans Device Replacement Tether For your Hans Sport II device with Quick Click anchors. This Hans replacement tether and slider kit fits the Hans Sport II (also nicknamed the Hans 3) device and comes in the standard 16.5" length and others for special applications. HANS III Tether For Quick Click Anchors Details: Manufacturer: Simpson Manufacturer part number: TK.1441.3 Length: Standard 16.5" / 420cm length works in most applications and is the one that comes standard with every adult device. Some race series require replacements between 2 and 5 years A great upgrade for an older fixed tether device. Kit includes one tether, two tether carriers and 4 new mount screws Length of X-Short tether from inside of both loops: 14.5" / 370cm TK11413XS Length of Short tether from inside of both loops: 15.5" / 395cm TK11413S Length of Standard tether from inside of both loops: 16.5" / 420cm TK11413 Length of Long tether from inside of both loops: 17.5" / 445cm TK11413L If you have a medium or large device, please stay with the standard 16.5" length

HANS Sport 2 Tether Kits Replace the tether kit on your HANS Sport 2 if you're involved in an incident, or swap out your existing tether for a longer or shorter one. For use with Sliding tethers and post anchors only.

HANS Device Sport 3 Head & Neck Restraint HANS Device Sport 3 Head Restraints are the lightest HANS Sport Series device to date. HANS Device Sport 3 Head Restraints present a contemporary approach to building a lightweight, strong, and safe HANS Device. Now in the third generation, HANS Device Sport 3 Head Restraints have a new design and polymer with a hollow collar which reduces the weight significantly. Its engineered reinforcements guarantee a very strong structure with a reduced mass. HANS Device Sport 3 Head Restraints provide the same level of safety as every HANS Device with the lightest, most comfortable injection-molded HANS made to date. HANS Device Sport 3 Head Restraints are developed with ease of driver entry/exit in mind. Its rounded back is lower than the original HANS Device design, reducing the risk of getting caught on a roll cage or in window openings when moving in and out of a racecar. Authentic HANS Devices set the standard in top performance in lab crash testing and real-life race crash results. The HANS Sport 3 is only available in a 20o Layback Angle configuration, suitable for the majority of racing applications including most Stock Cars, Modifieds, Drag, Legends, Bandalero and most road racing cars. However, the HANS Device Sport 3 Head Restraints are not compatible with cars that have extreme layback seats such as formula type cars, IndyCars, etc. HANS SPORT 3 HNR FEATURES Discovery Parts carries only dual homologation FIA/SFI HANS devices to make sure you're getting the right certification for any racing organization needs. Includes HANS posts (button-style) for your SA2015 helmet. Only 4 oz. (100 g) heavier than the HANS Pro Device! Improved fit, reduced weight compared to past models. Sliding tethers are standard. Injection molded super-structural carbon composite construction. Lower rounded collar saves weight and allows for easier entry/exit in many smaller, tighter vehicles.

HANS Tether for Hans III For Quick Click Anchors  Hans Device Replacement Tether For your Hans III with Quick Click anchors. This Hans replacement tether and slider kit fits the Hans III (also nicknamed the Hans Sport 3) device and comes in the standard 16.5" length and others for special applications. HANS Tether for Hans III For Quick Click Anchors Details: Manufacturer: Simpson Manufacturer part number: TK.1441.7Length: Standard 16.5" / 420cm length works in most applications and is the one that comes standard with every adult device. Some race series require replacements between 2 and 5 years A great upgrade for an older fixed tether device. Kit includes one tether, two tether carriers and 4 new mount screws Length of X-Short tether from inside of both loops: 14.5" / 370cm TK14417XS Length of Short tether from inside of both loops: 15.5" / 395cm TK14417S Length of Standard tether from inside of both loops: 16.5" / 420cm TK14417  Length of Long tether from inside of both loops: 17.5" / 445cm TK14417L If you have a medium or large device, please stay with the standard 16.5" length Your device is safest with the factory installed and tested 16.5" length. If you feel you need a special length, please call us at 888.748.7223 so we can make sure you have the safest set-up.

HANS Sport III Tether For Post Anchors  Hans Device Replacement Tether For your Hans Sport III device with Post anchors. This Hans replacement tether and slider kit fits the Hans Sport III device and comes in the standard 18" length and others for special applications. HANS Sport III Tether For Post Anchors Details: Manufacturer: Simpson Manufacturer part number: TK.1441.3 Some race series require replacements between 2 and 5 years A great upgrade for an older fixed tether device. Kit includes one tether, two tether carriers and 4 new mount screws Length of X-Short tether: 16" / 406cm TK14317XS Length of Short tether: 17" / 431cm TK14317S Length of Standard tether: 18" / 457cm TK14317 Length of Long tether: 19" / 482cm TK14317L If you have a medium or large device, please stay with the standard 18" length

Youth Size HANS III Device with Tether and Posts The HANS Device is synonymous with head and neck restraint technology. It is the most widely used and recognized head and neck restraint in motorsports, the product that all other products on the market are measured against. HANS Devices are used in most racing series. The HANS Device HANS III Youth Series makes the lightest-weight composite HANS device in the world available in youth sizes! These devices feature an all-new design of polymer with a hollow collar that significantly reduces weight. The engineered reinforcements offer exceptional strength with the same high level of safety as every HANS device. The reduced overall mass and weight give extra comfort and movement, well suited for the youth racer. The HANS III youth series will fit neck sizes of 11-14 inches (28-36 cm). Choose from two tether/post styles: standard HANS FIA 8858-2010 Clip In/Out; or SFI 38.1 Quick-Release. HANS SPORT 3 YOUTH HNR FEATURES The lightest weight composite HANS device offered. Engineered reinforcements with hollow collar. Posts and tether included, standard or QR. Exceptional comfort and movement. Suited for the youth racer. Fits neck sizes of 11-14 inches (28-36 cm). SFI 38.1 certified. The Youth Size HANS Device Sport III is value priced with the same performance as the Professional Series HANS Device. It is constructed from an injection molded super-structural carbon composite. The lower, rounded collar saves weight and allows for easier entry/exit in many smaller, tighter spaces. Sliding tethers come standard.

Stilo HANS Helmet Post Anchors (for SA2015 and newer) Stilo branded HANS helmet post anchors to attach your HANS or Stand21 head-and-neck restraint to your Snell SA2015 or SA2020 helmet. (Those helmets have threaded M6 inserts molded into the helmet.) These post anchors are FIA-approved and screw right into those helmet inserts. Stilo's FIA Approved HANS Posts In Black/Blue/Red Anodized Metal With Laser Engraving Dresses Up Every Stilo build. These are the Stilo FIA Internationally Approved Hans Posts.  Includes one pair (does one helmet) Stilo FIA HANS Posts in Red Details: Manufacturer: Stilo Manufacturer part number: AK 1131.12K-Stilo AK113112K-STILO BLACK Manufacturer part number: AK 1131.12B-Stilo AK113112B-STILO BLUE Manufacturer part number: AK 1131.12R-Stilo AK113112R-STILO RED Qty in kit: Two Color: Red Nut washers included: No FIA approved: Yes

Stilo HANS Zero Head Restraints The Stilo HANS Zero combines the best of the Simpson's HANS development group with a fresh Italian design engineered in partnership with Italian helmet manufacturer Stilo. The result is the absolute extreme in weight saving along with HANS proven safety technology to create the lightest, most comfortable HANS Device ever. Using proprietary techniques and aerospace grade carbon fiber, the Stilo HANS Zero is 15% lighter than the HANS Ultra Lite (now the next-lightest HANS on the market). SFI 38.1 certified and FIA 8858 approved. Made in America. NOTE: 30o Layback, size Medium only (which we've tested and works in both open and closed cars). Give Discovery Parts a call at 888-748-7223 for more details.