Youth

Arai CK-6 Youth Karting Helmet The Arai CK-6 is designed specifically for junior kart racers who are too small to comfortably fit and/or support the weight of an adult model SK-6 karting helmet. Meets the SNELL/FIA CMR standard for junior karting CK-6 FEATURES SRC Superior Resin shell material, developed and formulated in-house at Arai, dramatically improves the bonding properties of standard fibers, allowing the use of less material for reduced weight and lower cost. Removable/Replaceable cheek pads in optional sizes allow for custom fit when needed. Easily removable 5mm top layer of foam allows for further custom fitting. Wide and tall eye port for an exceptional field of view. Large intake vent toggles for easy operation, with large rear vents for improved ventilation. Features taken directly from the GP-6PED auto-racing helmet. Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity. Provides a stronger shell near the opening where it's needed while lowering the center of gravity. Rise in shell above the shoulders for added clearance. SPECIAL YOUTH SIZING XXS: 50-51cm XS: 52-53cm S: 54-56cm M: 57-58cm L: 59cm An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one.

Alpinestars Vapor Driver Racing Suit  The Vapor Suit boasts a soft aramidic exterior, and its triple-layer design is crafted from durable, fire-resistant cotton twill combined with feltro padding, ensuring maximum protection for drivers. For enhanced mobility and comfort, the suit features stretch panels in the crotch, waist, and underarm areas. Its outer shell and lining, made of fire-resistant cotton twill, prioritize driver comfort. Notable design elements include arms and legs that are pre-curved, 3/4 stretchable arm design, and stretch panels on the shoulders. Additionally, the suit has a boot cut leg design with an inner elasticated cuff, further enhancing protection. protection. ALPINESTARS VAPOR DRIVER RACING SUIT FEATURES New, three-layer construction Aramid Modacrylic assembly for maximum comfort, excellent resistance, and low weight. Anatomically engineered, pre-curved arms and legs provide an enhanced fit and an optimum position while driving. 3D Mesh lining for greater breathability. Aramidic knitted stretch panels on the back, waist, and crotch for ease of movement and enhanced comfort. Stretch panel construction on backs of shoulders and crotch for improved range of motion and comfort while driving. Ergonomic collar with soft, knitted lining for extended coverage and maximum comfort. 100% fire-resistant fabric provides high heat and flame-resistant proprieties. Alpinestars’ all-new Formula 1-derived extraction handle design provides an effective safety feature for the extraction of the driver in the event of a crash. Ribbed wrist and ankle cuffs for maximum comfort and reduced weight. Premium metal double-sided zipper, personalized for a versatile and customizable fit. Thigh pockets for convenient storage. Elastic waist construction for belt cinch fit. Regular fit design. Certified to SFI 3.2/5 homologation standard.    

Sparco K-Track Rib Protector   The Sparco K-Track is a hybrid rib protector vest designed to provide lightweight and flexible protection to drivers. It has been developed to exceed the standards set by the latest FIA 8870-2018 homologation, ensuring the highest levels of safety and protection. The K-Track features a sternum plate that adds an extra layer of protection to the driver's chest. The sides of the vest have multiple adjustments, allowing for a customized fit, and it has a soft stretch inner liner that conforms to the driver's shape in the seated position, offering enhanced comfort. YOUTH SIZES 120cm - 60-63cm Chest 130cm - 64-68cm Chest 140cm - 68-71cm Chest 150cm - 72-76cm Chest   ADULT SIZES XXS - 80-84cm Chest XS - 86-89cm Chest S - 94-97cm Chest M - 102-105cm Chest L - 110-113cm Chest     TECHNOLOGY FIA 8870-2018 Approved Lightweight and Flexible Soft Stretch Inner Liner Multiple Adjustments Available in Multiple Sizes

Youth Size HANS III Device with Tether and Posts The HANS Device is synonymous with head and neck restraint technology. It is the most widely used and recognized head and neck restraint in motorsports, the product that all other products on the market are measured against. HANS Devices are used in most racing series. The HANS Device HANS III Youth Series makes the lightest-weight composite HANS device in the world available in youth sizes! These devices feature an all-new design of polymer with a hollow collar that significantly reduces weight. The engineered reinforcements offer exceptional strength with the same high level of safety as every HANS device. The reduced overall mass and weight give extra comfort and movement, well suited for the youth racer. The HANS III youth series will fit neck sizes of 11-14 inches (28-36 cm). Choose from two tether/post styles: standard HANS FIA 8858-2010 Clip In/Out; or SFI 38.1 Quick-Release. HANS SPORT 3 YOUTH HNR FEATURES The lightest weight composite HANS device offered. Engineered reinforcements with hollow collar. Posts and tether included, standard or QR. Exceptional comfort and movement. Suited for the youth racer. Fits neck sizes of 11-14 inches (28-36 cm). SFI 38.1 certified. The Youth Size HANS Device Sport III is value priced with the same performance as the Professional Series HANS Device. It is constructed from an injection molded super-structural carbon composite. The lower, rounded collar saves weight and allows for easier entry/exit in many smaller, tighter spaces. Sliding tethers come standard.

OMP KS-3 Kart Racing Suit OMP KS-3 features high performance design at a competitive price. Constructed with a full Cordura outer layer, the KS-3 is homologated as a CIK-FIA Level 1 suit. The inner lining is composed of a soft, sweat wicking cotton material that is provides maximum breathability. Mesh inserts are built into the thighs, shoulders and pockets to further help with driver cooling. Pre-curved sleeves are attached with a fully-floating system for movement precision, while a low-cut collar is maximizes comfort in a seated karting position. HOMOLOGATION: CIK-FIA LEVEL 1  

Alpinestars KMX-3 S v2 Youth Karting Suit CONSTRUCTION Technical two-layer construction that meets homologation standards features a polyamide stretchy outer shell for optimized performance that is engineered for durability, minimal material bunching and optimum abrasion resistance. Poly-toweling lining offers effective and proven moisture-wicking. Wide tech mesh panels strategically positioned on underarm, sides and seat area for optimized ventilation and airflow. Premium metal YKK zippers with personalized synthetic leather zipper pulls, plus double slider for a versatile and customizable fit. Alpinestars exclusive shoulder epaulette construction provides an effective feature for the extraction of the driver in the event of a crash. Ergonomic collar with soft lining for extended coverage and maximum comfort. PROTECTION Certified to CIK-FIA Level 2 homologation standard, N 2013-1. Alpinestars fully floating arm construction with stretchable knit fabric ensures minimal material resistance while driving. KEY FEATURES Collar features an adjustable closure system for maximum safety and security. Adjustable waist belt for a tight, personalized fit. Anatomical arm, leg and torso patterned paneling for an optimum fit in the driving position. Knitted wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Two thigh pockets offers a convenient storage option for those times away from the driving seat. Comes in a wide range of aggressive new colorways.

Sparco Kerb Lady Kart Racing Suit The new Sparco KERB LADY karting suit is designed specifically for women. Made from light weight abrasion-resistant fabric, the KERB LADY features pre-curved arms, full-floating sleeves and strategically placed stretch panels and elastic for increased mobility. The KERB LADY has internal thigh and underarm vents for better breathability and a unique waist adjustment straps that delete the traditional belt. It features high-contrast accents for ultimate style. Available in 6 colors in sizes XS-XXL. The KERB is CIK-FIA 2013-1 approved.TECHNOLOGY Specific fit for women Unique waist adjustment straps Pre-curved arms Full floating sleeves Back stretch panel Internal leg and underarm vents for breathability CIK-FIA 2013-1 approved

Sparco Kerb Kart Racing Suit The new Sparco Kerb karting suit is designed for safety and comfort. Made from light-weight abrasion-resistant fabric, the Kerb features pre-curved arms, full-floating sleeves and strategically placed stretch panels and elastic for increased mobility and comfort. The Kerb has internal thigh and underarm vents for better breathability and optimal cooling and a unique waist adjustment straps that delete the traditional belt. It features high-contrast accents for ultimate style. The Sparco Kerb is CIK-FIA 2013-1 approved. TECHNOLOGY Unique waist adjustment straps Pre-curved arms Full floating sleeves Back stretch panel Internal leg and underarm vents for breathability CIK-FIA 2013-1 approved

  OMP KS-4 Karting Suit Homologation: CIK-FIA Level 1   PROTECTION AND VALUE Get OMP legendary quality, protection and comfort that kart racers demand in an affordable entry-level suit. The KS-4 is designed with the styling of a high-end suit at an affordable price.   KEY FEATURES Four-layer construction with an outer layer in polyester and interior in soft cotton sponge.  A low cut collar and arm bellows in elastic knitted fabric give you maximum freedom of movement. Mesh inserts for ventilation on your legs, shoulders and through the pockets.

Alpinestars KMX-9 v2 Graphic 5 Kart Racing Suit Certified to CIK-FIA homologation standards, the KMX-9 v2 features an aggressive design and vibrant colorways for entry and intermediate level racers. Boasting three-layer construction for protection and low weight, this suit also has a 100% polyester toweling liner for driver comfort. Other driver-friendly design details include an angled front opening, stretch panels on the back, shoulders and waist for an optimized fit, and breathable mesh material on the crotch and underarms. ALPINESTARS KMX-9 V2 GRAPHIC KART SUIT PROTECTION Certified to CIK-FIA Level 2 homologation standard N 2013-1. Technical three-layer construction that meets the new homologation standard, featuring a Twill polyamide outer shell, plus double technical linings for comfort and fit. Engineered for durability, minimal material bunching and high levels of abrasion resistance while the polytoweling lining offers moisture-wicking properties.   ALPINESTARS KMX-9 V2 GRAPHIC KART SUIT CONSTRUCTION Advanced two-layer construction assembly for optimized performance, improved breathability and weight saving. Alpinestars asymmetric front opening design aids fitting. Tech mesh panels positioned on the underarms and seat area for optimized ventilation. Alpinestars Formula 1-derived design and technology shoulder epaulettes. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort with safe closure system. Adjustable waist belt allows a tight personalized fit. Knitted stretchable panels on back shoulder and lumbar area ensure minimal material resistance while driving. Engineered for durability, minimal material bunching and abrasion resistance, while the poly-toweling lining boasts moisture-wicking properties.   ALPINESTARS KMX-9 V2 GRAPHIC KART SUIT KEY FEATURES Anatomical arm, leg and torso paneling is patterned to create the optimum position while driving. Knitted wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Two thigh pockets offer a convenient storage option for those times away from the driving seat. Premium YKK zipper with personalized zipper pullers, plus double slider for versatile and customizable fit. Comes in two amazing Graphic 5 colorways.  

Alpinestars KMX-9 v2 Graphic 3 Kart Racing Suit Certified to CIK-FIA homologation standards, the KMX-9 v2 features an aggressive design and vibrant colorways for entry and intermediate level racers. Boasting three-layer construction for protection and low weight, this suit also has a 100% polyester toweling liner for driver comfort. Other driver-friendly design details include an angled front opening, stretch panels on the back, shoulders and waist for an optimized fit, and breathable mesh material on the crotch and underarms. Alpinestars KMX-9 v2 Kart Racing Suit PROTECTION Certified to CIK-FIA Level 2 homologation standard N 2013-1. Technical three-layer construction that meets the new homologation standard, featuring a Twill polyamide outer shell, plus double technical linings for comfort and fit. Engineered for durability, minimal material bunching and high levels of abrasion resistance while the polytoweling lining offers moisture-wicking properties. Alpinestars KMX-9 v3 Kart Racing Suit CONSTRUCTION Advanced two-layer construction assembly for optimized performance, improved breathability and weight saving. Alpinestars asymmetric front opening design aids fitting. Tech mesh panels positioned on the underarms and seat area for optimized ventilation. Alpinestars Formula 1-derived design and technology shoulder epaulettes. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort with safe closure system. Adjustable waist belt allows a tight personalized fit. Knitted stretchable panels on back shoulder and lumbar area ensure minimal material resistance while driving. Engineered for durability, minimal material bunching and abrasion resistance, while the poly-toweling lining boasts moisture-wicking properties. Alpinestars KMX-9 v3 Kart Racing Suit KEY FEATURES Anatomical arm, leg and torso paneling is patterned to create the optimum position while driving. Knitted wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Two thigh pockets offer a convenient storage option for those times away from the driving seat. Premium YKK zipper with personalized zipper pullers, plus double slider for versatile and customizable fit. Comes in two amazing Graphic 3 colorways.    

Alpinestars KMX-9 v2 Graphic 1 Kart Racing Suit Certified to CIK-FIA homologation standards, the KMX-9 v2 features an aggressive design and vibrant colorways for entry and intermediate level racers. Boasting three-layer construction for protection and low weight, this suit also has a 100% polyester toweling liner for driver comfort. Other driver-friendly design details include an angled front opening, stretch panels on the back, shoulders and waist for an optimized fit, and breathable mesh material on the crotch and underarms. ALPINESTARS KMX-9 V2 GRAPHIC 1 KART RACING SUIT PROTECTION Certified to CIK-FIA Level 2 homologation standard N 2013-1. Technical three-layer construction that meets the new homologation standard, featuring a twill polyamide outer shell, plus double technical linings for comfort and fit. Engineered for durability, minimal material bunching and high levels of abrasion resistance while the polytoweling lining offers moisture-wicking properties. ALPINESTARS KMX-9 V2 GRAPHIC 1 KART RACING SUIT CONSTRUCTION Advanced two-layer construction assembly for optimized performance, improved breathability and weight saving. Alpinestars asymmetric front opening design aids fitting. Tech mesh panels positioned on the underarms and seat area for optimized ventilation. Alpinestars Formula 1-derived design and technology shoulder epaulettes. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort with safe closure system. Adjustable waist belt allows a tight personalized fit. Knitted stretchable panels on back shoulder and lumbar area ensure minimal material resistance while driving. Engineered for durability, minimal material bunching and abrasion resistance, while the poly-toweling lining boasts moisture-wicking properties. ALPINESTARS KMX-9 V2 GRAPHIC 1 KART RACING SUIT KEY FEATURES Anatomical arm, leg and torso paneling is patterned to create the optimum position while driving. Knitted wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Two thigh pockets offer a convenient storage option for those times away from the driving seat. Premium YKK zipper with personalized zipper pullers, plus double slider for versatile and customizable fit. Comes in two amazing Graphic 2 colorways.    

Alpinestars KMX-9 v2 Graphic 2 Kart Racing Suit Certified to CIK-FIA homologation standards, the KMX-9 v2 features an aggressive design and vibrant colorways for entry and intermediate level racers. Boasting three-layer construction for protection and low weight, this suit also has a 100% polyester toweling liner for driver comfort. Other driver-friendly design details include an angled front opening; stretch panels on the back, shoulders and waist for an optimized fit; and breathable mesh material on the crotch and underarms. ALPINESTARS KMX-9 V2 GRAPHIC 2 SUIT PROTECTION Certified to CIK-FIA Level 2 homologation standard N 2013-1. Technical three-layer construction that meets the new homologation standard, featuring a twill polyamide outer shell, plus double technical linings for comfort and fit. Engineered for durability, minimal material bunching and high levels of abrasion resistance while the polytoweling lining offers moisture-wicking properties. ALPINESTARS KMX-9 V2 GRAPHIC 2 SUIT CONSTRUCTION Advanced two-layer construction assembly for optimized performance, improved breathability and weight saving. Alpinestars asymmetric front opening design aids fitting. Tech mesh panels positioned on the underarms and seat area for optimized ventilation. Alpinestars Formula 1-derived design and technology shoulder epaulettes. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort with safe closure system. Adjustable waist belt allows a tight personalized fit. Knitted stretchable panels on back shoulder and lumbar area ensure minimal material resistance while driving. Engineered for durability, minimal material bunching and abrasion resistance, while the poly-toweling lining boasts moisture-wicking properties. ALPINESTARS KMX-9 V2 GRAPHIC 2 SUIT KEY FEATURES Anatomical arm, leg and torso paneling is patterned to create the optimum position while driving. Knitted wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Two thigh pockets offer a convenient storage option for those times away from the driving seat. Premium YKK zippers with personalized zipper pullers, plus double slider for versatile and customizable fit.

Sparco Thunder Kart Racing Suit The Sparco Thunder 2020 karting suit offers the ultimate balance of performance and value. Made from abrasion-resistant fabric and lined with Sparco’s well-known soft cotton terry, the Thunder is both durable and comfortable. To dissipate heat and cool the body temperature, the Thunder has internal thigh and underarm vents. The Thunder features half-floating sleeves and strategically placed stretch panel and elastic for increased mobility. This stylish two tone suit includes contrast accents and Sparco signature epaulettes. The Sparco Thunder is CIK-FIA 2013-1 approved. TECHNOLOGY Pre-curved arms Full floating sleeves Back stretch panel Internal leg and underarm vents for breathability CIK-FIA 2013-1 approved