Molecule Wash & Spot Cleaner Kit 4oz ea
$11.95
Molecule Wash & Spot Cleaner Kit
Save some money and try both. Molecule Nomex Suit Wash Effectively Cleans Nomex Fabric (and other technical fabrics) in standard washing machines. It is formulated specifically for the critical requirements of Nomex racing suits. It is expressly designed to remove the unique oils, fuel, and soils that are often encountered in the racing environment.
Molecule Wash & Spot Cleaner Details
Manufacturer: Molecule Labs
Manufacturer part number: MSAK-442
Molecule Wash: 4oz
Molecule Spot Cleaner: 4oz
Concentrated formula effectively cleans technical fabrics in standard washing machines
Removes contaminants that can degrade fabric performance
Contains an antimicrobial agent to inhibit the growth of bacterial odors
Maintains fabric breathability
Contains a fabric brightener to help you look your best
Recommended for Nomex® and other technical fabrics
Molecule Refresh keeps your suits and helmets clean and fresh over long racing weekends and between washings. This spray is designed to reduce odors on all technical fabrics and contains an anti-microbial agent that inhibits the growth of bacterial odors. Molecule Labs Refresher has a light, fresh scent and contains skin-friendly ingredients.
Motorsports injuries have decreased in recent years, thanks to improvements in the quality of protective gear. But despite driver and industry precautions, racing is still a dangerous sport. Exposure to a flash fire for even a few seconds can lead to serious injury or loss of life. Severe skin burns occur more often than they should because protective clothing is not properly cared for or has not been made resistant to flammable liquids.
Racing suits made from Nomex® technical fabric have extraordinary properties to protect drivers from flames and heat. Care instructions published by Nomex® manufacturer DuPont state that this unique fabric requires special care to be fully effective.
DuPont's laundering guide cautions Nomex® users that the fabric must be kept clean. "Flame resistance can be compromised by the presence of flammable contaminants on the garment, " the guide explains.
However, DuPont advises against using ordinary soaps for removing these contaminants. "Soap scums may be flammable and could adversely affect the thermal ensure safety and comfort.
Molecule is the right way to care for Nomex. Molecule Wash effectively cleans Nomex® fabric in standard washing machines. Removes contaminants that can degrade fabric performance. Antimicrobial agent inhibits the growth of bacterial odors. Dissolve and suspend tough spots and stains that can create combustible hot spots with Molecule Spot Cleaner. This cleaner is a concentrated formula that penetrates deeply into Nomex and technical fabrics to safely dissolve embedded spots and stains.
Molecule Protector spray extends the effectiveness of your clean firesuit. Protector spray bonds to Nomex fabric to help reduce flammable stains from oil, grease, fuel, dirt, and other contaminants that may compromise the efficiency of your racing suit. Armor your suit with Simpson Molecule Protector spray.
Do you have a long race weekend coming up? Molecule Refresh spray revives your suit for another day at the track. Molecule Refresh contains an antimicrobial agent to inhibit the growth of bacterial odors and has a light, fresh scent. It's formulated with cosmetic-grade, skin-friendly ingredients and maintains fabric breathability. You can even use it on helmet liners and gloves. Can't wash your suit? Freshen it up with Simpson Molecule Refresh spray.
Molecule works and has been tested with Nomex, CarbonX, Proban, fire-retardant cotton and other technical fabrics.
Sparco Shield RW-9 Nomex Fireproof Shirt
$199.00
Sparco Shield RW-9 Nomex Fireproof Shirt
The Shield RW-9 line of Nomex underwear provides the highest level of breathability, comfort and protection. When designing this line, Sparco studied the driver's sitting position to ensure ultimate fit and comfort. Shield RW-9 uses a seamless construction with ultra-soft stretchable material. There are two different woven materials in key areas; thin stretch Nomex for comfort and mobility as well as a double perforated Nomex for increased breathability and ultimate comfort.
The minimal seams are stitched flat with thin specialized thread for added comfort. All Shield RW-9 pieces are treated with Sparco X-Cool Silver which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool Silver treatment has an anti-bacterial effect. The Shield RW-9 collection has pieces to fit every driver's style, including short-sleeved nomex t-shirts, long-sleeved nomex shirts, nomex pants, nomex balaclava, and nomex socks.
SPARCO RW-9 NOMEX UNDERLAYER SHIRT FEATURES
The Shield RW-9 line is SFI 3.3 homologated (except short-sleeve t-shirt)
Seamless stretchable Nomex in key areas for mobility
Perforated knit in key areas for breathability
Designed for comfort in a driving position
Minimal external seams increase driver comfort
X-Cool Silver draws heat from the skin to cool the driver
X-Cool Silver has anti-bacterial effect
Available in white or black
Sparco Martini Full Zip Sweatshirt
$139.00
Sparco Martini Racing Full-Zip Sweatshirt
The Sparco Martini Full Zip Sweatshirt wears almost like a jacket, bringing everyday style to your racing lifestyle. Designed in Italy and finished with classic Martini Racing graphics, this lightweight hooded zip-up is the perfect choice for cool track mornings, late-night wrenching, or just repping your team in comfort.
Motorsport Heritage in a Lightweight Everyday Jacket
Features:
Track-Inspired Design: Embroidered Sparco and Martini Racing logos with subtle striping detail make this more than just a casual layer.
Premium Cotton Blend: Made from a soft 70% cotton / 30% polyester blend for comfort and breathability without bulk.
Full-Length Zip : Versatile and functional, with a clean cut that fits in at the paddock or the pub.
Color Options: Choose from navy, white, gray, or black—all with Martini Racing accents.
European Fit: Tailored Italian cut; we recommend sizing up for a more relaxed U.S. fit.
Sparco Martini Full Zip FAQs
Is it fleece-lined or insulated? No, it’s lightweight and unlined—perfect for mild weather or trackside layering, not deep winter use.
How should I choose a size? It runs small due to its European fit. We suggest ordering one size up from your usual U.S. jacket size.
Can I machine wash it? Yes, but we recommend cold wash and air drying to preserve the shape and embroidery details.
Layer up with motorsport style—grab the Sparco Martini Full Zip Jacket and wear your racing roots on your sleeve (literally).
Chillout Breakaway Couplings
$84.00
Chillout Breakaway Couplings
The breakaway connectors are a unique latch assembly that consists of two independent mechanisms that secure together and breakaway at 9lbs of pressure. Our break-away adaptors are independent of the current shirt connectors so that they can be placed in a location on the tubing that is best to break away in an emergency situation. These are designed to be connected and disconnected thousands of times, unlike other brands.This latch design prevents unintentional release under standard operating conditions but allows for hands-free release in an emergency. (2 pcs, ¼” hose connectors) It takes about 9 pounds each of force to release our break-away connectors. Others brands need around 40 pounds each to release.
Paragon Ignite Short Sleeve Top
from $289.99
Paragon Ignite Short Sleeve Top
The Paragon Ignite top is Paragon’s flame-retardant option for keeping your core cool in the most intense racing environments. The Ignite Short Sleeve Top is made from a 4.8 oz. Modacrylic/FR Rayon blend that has excellent quick-drying qualities. It features double the sewn-in coolant tubing compared to a typical cooling garment, giving you a lot of tubing covering your core.
Available in Small through XXL with a true-to-size fit, the Paragon Ignite Short Sleeve Top has either right- or left-exit tubing to suit your driver cooling setup.
Paragon offers the option to add a hood to the Paragon Ignite top for extra cooling to the head. The Paragon Ignite hood is made from the same material as the Paragon Ignite Short Sleeve Top for a seamless connection.
Compatible with the full line of Paragon cooling systems and accessories. If you have ever wanted more cooling, the Paragon Ignite series is for you.
Paragon Ignite Pro FR Cooling Shirt Details
Manufacturer: Paragon
Flame resistance rating: none
Tubing exit: choose left- or right-exit
Construction: Modacrylic/FR Rayon blend for superior moisture wicking
Anti-microbial: Ag47 protection
Double the tubing of standard cooling shirt
Won’t shrink, pick, or fade
Extra length
Clean seams for all-day comfort
Machine wash, machine dry
Paragon Everlast Ice
$8.99
Paragon Everlast Ice
Paragon’s Everlast Ice allows for longer cooling periods when added to ice and water in any Paragon cooler or Paragon cooler bag. Paragon Everlast Ice should be kept in a freezer until you're ready to use it. Compatible with non-Paragon coolers. Paragon Everlast Ice is the perfect solution for keeping the water in your Paragon Viking cooler ice-cold at the track. No more running to the store for more ice!
Paragon Everlast Ice Details
Manufacturer: Paragon
Weight: 1 lb.
Reusable and economical
Leakproof, non-toxic gel
Long lasting cold
Efficient transfer of energy
Chillout Systems No Drip 1/4" Shirt Adapters
$105.00
Chillout Systems No Drip 1/4" Shirt Adapters
No Drip Adapters from Chillout Systems are designed to never leak and maximize the reliability of your driver cooling unit without the annoying "drip" when you disconnect.
Chillout Systems No Drip 1/4" Shirt Adapter Details
Manufacturer: ChillOut Systems
Manufacturer Part Number: CO-DLC-1
Works with other ¼" cooling shirts: Yes
Quantity: 4 Pieces (2 complete sets)
We have found in very long endurance races such as the World Racing league 24 Hours of Sebring, multiple driver changes have parasitic loss of fluid during the repetitious connecting of the drivers shirts. No Drip adapters also prevent unintentional release as the Shirt Adapters lock together, linking the hose to your system securely.
Alpinestars Session II Fleece Hoodie
$100.00
$109.95
Alpinestars Session II Fleece Hoodie
100% Polyester, 240gsm HOODED ZIP FRONT POLY FLEECE Zip front body with contrast panels Mesh lined hood, tech drawcords, rib cuffs and hem Chest HD word logo, sleeve graphics Internal main label and external label branding.
Bell HP77 Carbon Fiber Helmet | FIA 8860-2018 ABP
from $4,999.00
Bell HP77 Carbon Fiber Helmet
The Bell HP77 Carbon Fiber Helmet is Bell Racing's flagship open-cockpit helmet, developed from the multiple Formula 1 World Championship-winning HP7 platform and engineered for professional drivers competing at the highest levels of motorsport.
Built around an ultra-lightweight high-strength, high-modulus carbon fiber shell, the HP77 combines advanced ballistic protection, an extremely narrow eyeport, powerful ventilation, excellent aerodynamics, and an optical-grade Double Screen Anti-Fog shield. The helmet is homologated to the FIA 8860-2018 ABP standard.
FIA 8860-2018 ABP Homologated
The Bell HP77 meets the FIA 8860-2018 ABP standard and was the first Bell helmet to meet this specification. ABP, or Advanced Ballistic Protection, adds additional protection in the frontal area of the helmet for drivers exposed to flying debris in open-cockpit competition.
Bell incorporates high-strength ballistic materials above the HP77's narrow eyeport, creating additional protection without compromising the helmet's lightweight carbon construction.
Designed for Open-Cockpit Racing
The HP77 is specifically intended for professional formula and open-cockpit racers. Its narrow eyeport, ballistic reinforcement, aerodynamic shell, anti-fog visor system, and advanced ventilation are designed for the intense conditions found in open-wheel competition.
The HP77 platform remains closely associated with top-level formula racing, including Formula 1, where Bell continues to use the HP77 family with professional drivers.
Ultra-Light Carbon Fiber Shell
The HP77 uses a high-strength, high-modulus carbon fiber shell manufactured for exceptionally low weight and high structural performance.
Bell's High Performance helmet series uses advanced carbon construction combined with a multi-density energy-absorbing liner system to deliver the level of protection required for FIA 8860 racing applications.
Advanced Ballistic Protection
A distinguishing feature of the HP77 is the reinforced frontal area above the visor opening. High-strength ballistic materials are integrated into this section of the helmet to improve protection against flying debris.
The narrow eyeport also reduces the exposed frontal area while maintaining the visibility required for professional open-cockpit competition.
Multi-Density Energy-Absorbing Liner
Inside the shell, Bell uses an advanced multi-density, multi-piece liner engineered to maximize energy absorption and impact performance.
The combination of the carbon outer shell and sophisticated internal energy-management structure allows Bell to deliver extremely high protection while controlling overall helmet weight and dimensions.
Optical-Grade DSAF Shield
The Bell HP77 includes an optical-grade injection-molded Double Screen Anti-Fog (DSAF) shield. The dual-screen construction is designed to control fogging and maintain clear visibility in changing weather and cockpit conditions.
The HP77 uses the Bell SE077 3mm shield and SV(SE07) pivot system.
12-Channel Ventilation System
Bell equips the HP77 with a powerful top and chin-bar ventilation system featuring 12 intake and extraction channels.
The ventilation arrangement is engineered to move a high volume of air through the helmet while supporting the aerodynamic requirements of open-cockpit racing. The standard air-intake configuration includes a two-piece center intake and low-profile side intakes.
Aerodynamic Shell and Shield Design
The HP77 shell and visor system are shaped to improve aerodynamic performance, reduce internal noise, and enhance the helmet's overall energy-management characteristics.
For drivers who need additional aerodynamic tuning, Bell offers optional top spoilers, top gurneys, and chin-bar gurneys separately.
Factory-Installed HANS Anchors
The Bell HP77 comes with factory-installed HANS anchors as original equipment, making the helmet ready for use with compatible Head and Neck Restraint systems.
Drink Tube and Radio Integration
Integrated channels inside the face area provide multiple routing options for drink tubes and radio communication systems.
Bell also offers the HP77 with an optional special-order frontal chin-bar opening for direct drink-tube installation.
High-Comfort Fire-Retardant Interior
The standard HP77 interior uses Bell's Dark Grey High Strength – High Comfort FR fabric.
Custom-order interior colors are also available, including Tan, White, Red, Purple, Blue, Green, Neon Yellow, Pink, and Orange. Additional cost and lead time may apply to custom interior options.
Synthetic Rubber Gasket Seal
A synthetic rubber gasket surrounds the visor opening to help keep dirt and water from entering the helmet, an important feature for open-cockpit racing in changing weather conditions.
Bell HP77 Features
FIA 8860-2018 ABP homologation
Based on Bell's championship-proven HP7 platform
Designed for professional open-wheel and open-cockpit racing
High-strength, high-modulus carbon fiber shell
Integrated ballistic protection in the frontal area
Very narrow eyeport
Advanced multi-density, multi-piece energy-absorbing liner
Optical-grade Double Screen Anti-Fog shield
SE077 3mm shield compatibility
12 intake and extraction ventilation channels
Low-profile side air intakes
Aerodynamically optimized shell and shield design
Integrated drink tube and communication routing channels
Factory-installed HANS anchors
Synthetic rubber visor gasket
Optional top spoiler and aerodynamic gurneys available
HP helmet bag included
Matte carbon fiber finish
Available in sizes 54 through 59+
Who Is the Bell HP77 For?
The HP77 is intended for drivers competing in professional formula, open-wheel, and open-cockpit racing where FIA 8860-2018 ABP homologation is required or preferred.
It is also an excellent choice for racers who prioritize extremely low helmet weight, advanced ballistic protection, premium anti-fog performance, and race-proven aerodynamics.
HP77 vs. HP7
Both helmets are based around Bell's High Performance carbon helmet platform, but the HP77 adds the frontal ballistic protection and narrow eyeport required for FIA 8860-2018 ABP homologation. The HP7 is the better comparison for closed-cockpit applications where ABP certification is not required.
Bell HP77 Shield Compatibility
The HP77 uses the Bell SE077 3mm shield with the SV(SE07) pivot system. Replacement DSAF shields are available in multiple finishes and configurations.
Bell HP77 Interior Color Options
Dark Grey FR fabric is standard. Bell also offers several custom-order interior colors including Tan, White, Red, Purple, Blue, Green, Neon Yellow, Pink, and Orange.
Custom interiors are special-order items and may require additional cost and production time.
Bell HP77 Carbon Fiber Helmet Sizing Chart
Questions & Answers
What certification does the Bell HP77 have?The Bell HP77 is homologated to the FIA 8860-2018 ABP standard.
What does ABP mean on the Bell HP77?ABP stands for Advanced Ballistic Protection. The HP77 incorporates high-strength ballistic materials in the frontal area above the eyeport to provide additional protection from flying debris.
Is the Bell HP77 designed for open-cockpit racing?Yes. Bell specifically developed the HP77 for professional formula and other high-level open-cockpit racing applications.
Is the Bell HP77 carbon fiber?Yes. The HP77 uses an ultra-lightweight high-strength and high-modulus carbon fiber shell.
What shield does the Bell HP77 use?The HP77 uses the Bell SE077 3mm shield and SV(SE07) pivot system.
Does the HP77 shield have anti-fog protection?Yes. The standard optical-grade shield uses Bell's Double Screen Anti-Fog construction for improved fog control and visibility.
Does the Bell HP77 come with HANS anchors?Yes. Factory-installed HANS anchors are included as original equipment.
Can I install a drink tube or radio system?Yes. Integrated channels in the helmet provide multiple routing options for drink tubes and communication equipment.
How many ventilation channels does the HP77 have?The helmet uses 12 intake and extraction channels through its top and chin-bar ventilation system.
Can aerodynamic accessories be added?Yes. Bell offers compatible top spoilers, top gurneys, and chin-bar gurneys separately.
Does the Bell HP77 include a helmet bag?Yes. An HP helmet bag is included.
What interior color comes standard?Dark Grey High Strength – High Comfort FR fabric is standard. Multiple custom interior colors are available by special order.
What sizes are available?Bell lists the HP77 in sizes 54, 55, 56, 57, 58, and 59+.
Sparco Prime-T Racing Shoes
$249.66
$449.00
Sparco Prime-T Racing Shoes
The Sparco Prime-T Racing Shoes combine ultralight construction, secure foot support, and precise pedal feedback for serious auto racing applications. Developed with weight reduction and driver control in mind, the Prime-T features a soft leather upper, an overlapping hook-and-loop closure, and a thin racing sole engineered for demanding pedal boxes.
The streamlined closure system replaces traditional exposed laces with a large hook-and-loop flap that secures the foot while maintaining a clean, low-profile shape. Perforations in the closure and upper work with the breathable fabric tongue to improve airflow and comfort during long sessions behind the wheel.
A lightweight rubber outsole provides direct feedback through the brake, throttle, and clutch pedals. Its stiff construction is especially suited to race cars requiring greater brake-pedal force, helping the driver maintain consistent pressure and control.
Ultralight Leather Construction
The Prime-T uses a soft leather upper to balance low weight, flexibility, and support. Its close-fitting construction helps reduce unnecessary movement inside the shoe while allowing the driver to operate closely spaced pedals accurately.
Full Hook-and-Loop Closure
A large overlapping hook-and-loop closure provides a secure and adjustable fit without exposed laces. The flap covers the breathable fabric tongue and distributes support across the top of the foot.
Breathable Racing Comfort
Perforations throughout the upper and closure encourage airflow around the foot. The breathable fabric tongue provides additional ventilation and cushioning during sprint races, endurance events, qualifying sessions, and track days.
Stiff Sole for Demanding Brake Pedals
The Prime-T outsole uses a stiff setting designed for race cars that require substantial brake-pedal force. This construction supports the foot under heavy braking while retaining the sensitivity needed for accurate throttle and clutch operation.
Responsive Pedal Feel
The thin, lightweight rubber sole creates a direct connection between the driver and the pedals. Its low-profile design helps the driver feel changes in brake pressure, throttle position, and pedal movement more clearly.
Anti-Static and Fluid-Resistant Outsole
The outsole is anti-static and resistant to fuel and oil, making it suitable for use inside the cockpit and around the race paddock. Unnecessary walking on rough or abrasive surfaces should still be avoided to preserve the thin racing sole.
Sparco Prime-T Racing Shoe Features
Ultra-lightweight racing shoe design
Soft leather upper construction
Full overlapping hook-and-loop closure system
Breathable fabric tongue
Perforated closure and upper for improved ventilation
Thin, lightweight rubber racing sole
Stiff outsole setting for high brake-pedal force
Responsive pedal feedback
Anti-static outsole construction
Fuel- and oil-resistant sole
Low-profile fit for closely spaced pedals
FIA 8856-2018 approved
Technical Specifications
Product: Sparco Prime-T Racing Shoes
Manufacturer: Sparco
Model: Prime-T
Upper Material: Soft leather
Closure: Full overlapping hook-and-loop flap
Tongue: Breathable fabric
Ventilation: Perforated upper and closure
Outsole: Lightweight rubber
Sole Properties: Stiff, anti-static, fuel resistant, and oil resistant
Certification: FIA 8856-2018
Sizes: EU 37–48
Sparco Prime-T Racing Shoes Sizing Chart
Frequently Asked Questions
Are the Sparco Prime-T Racing Shoes FIA approved?
Yes. The Sparco Prime-T Racing Shoes are approved to the FIA 8856-2018 standard. Drivers should confirm the current footwear requirements for their racing series and class.
Do the Sparco Prime-T Racing Shoes have traditional laces?
No. The Prime-T uses a large overlapping hook-and-loop flap that secures the foot and covers the breathable tongue.
Why does the Prime-T use a stiff sole?
The stiff outsole supports the foot when applying high brake-pedal pressure. This can be especially beneficial in formula cars, prototypes, and other race cars with firm braking systems.
Does the stiff sole still provide good pedal feedback?
Yes. The sole is thin and lightweight to maintain direct feedback through the pedals while providing the support required for heavy braking.
Are the Sparco Prime-T Racing Shoes breathable?
Yes. The upper and closure include ventilation perforations, while the fabric tongue helps promote airflow around the foot.
Are the soles resistant to fuel and oil?
Yes. The rubber outsole is designed to resist fuel and oil and also features anti-static properties.
Are these shoes suitable for HPDE and track-day driving?
Yes. The secure closure, lightweight construction, and responsive sole make the Prime-T suitable for professional competition, club racing, time trials, autocross, HPDE events, and track days.
How should I care for the Sparco Prime-T Racing Shoes?
Allow the shoes to air dry naturally after use and keep them away from direct heat. Clean the leather with an appropriate leather-care product and avoid unnecessary walking on gravel, rough pavement, or other abrasive surfaces.
Ultralight Support and Precise Pedal Control
The Sparco Prime-T Racing Shoes provide a focused combination of low weight, secure support, ventilation, and direct pedal feedback. Their soft leather upper, full hook-and-loop closure, and stiff fluid-resistant sole make them a strong choice for drivers who demand consistent control under heavy braking.
Bell MAG-10 Carbon Fiber Helmet FIA8859-2024/SA2025
$1,299.95
Bell MAG-10 Carbon Fiber Helmet
The Bell MAG-10 Carbon is a lightweight open-face helmet for drivers who want carbon-shell performance, clear field of view, and all-day comfort in closed-cockpit and track-day environments. With modern ventilation, a long face shield, and hardware compatibility for coms and hydration, it’s a versatile choice for endurance, HPDE, and club racing.
Carbon Performance with Open-Face Visibility
The carbon shell helps reduce fatigue over long stints while the wide eyeport and long visor maximize peripheral vision and airflow. Factory M6 terminals support head-and-neck restraints. Interior materials are fire-resistant and designed for repeatable comfort and easy cleaning between sessions.
Bell MAG-10 Carbon Fiber Helmet Details
Manufacturer: Bell Racing Helmets
Construction: lightweight carbon fiber shell
Orientation: open-face with long clear visor
Homologation: FIA 8859-2024 and Snell SA2025
Hardware: factory-installed M6 HNR terminals
Comms/Hydration: routing-ready (components optional)
Finish: gloss carbon
Bell MAG-10 Carbon Fiber Helmet Features
Open-face carbon design for low weight and wide, unobstructed vision
Multi-density, multi-piece liner for impact energy management
Long clear visor with anti-fog-ready compatibility and broad coverage
Ventilation paths promote airflow for heat management in closed cabins
Routing-ready for radio microphone, speakers, and hydration tube (optional kits)
Factory M6 terminals for head-and-neck restraint systems
Interior uses fire-resistant comfort fabrics for durability and easy care
Bell MAG-10 Carbon Fiber Helmet Sizing Chart
Bell MAG-10 Carbon Fiber Helmet FAQs
Is the MAG-10 legal for my series?It carries FIA 8859-2024 and Snell SA2025. Most club and regional series accept these; always verify event rules.
Who should choose an open-face helmet?Drivers in closed-cockpit cars who want maximum visibility, communication clarity, and reduced weight often prefer open-face designs.
Does it include head-and-neck restraint anchors?Yes. M6 terminals are factory-installed for HNR compatibility.
Can I add radio and hydration?Yes. The helmet is routing-ready for coms and drink tube hardware; add components to match your team’s setup.
What visor options are available?A clear long visor is standard; tinted and specialty visors are available separately to suit lighting and preference.
Can I wear glasses with this helmet?Yes. The open-face layout and liner shape accommodate most prescription frames comfortably.
Get carbon-shell performance, wide-open vision, and race-ready versatility. Order the Bell MAG-10 Carbon today and head to grid with confidence.
Stilo ST6 FN ABP 8859-2024 Carbon Fiber Helmet SA2025
$2,599.95
Stilo ST6 FN ABP Carbon Fiber 8859-2024 / SA2025 Racing Helmet
Advanced ABP protection with Snell SA2025 performance
For over 25 years Stilo has led helmet innovation, and the ST6 FN ABP marks a new benchmark. With development input from top programs, the ST6 refines front and top aero for stability, broadens airflow, and expands visibility so you can focus on driving.
Built from carbon fiber for a light, rigid shell, the ST6 FN ABP blends comfort and cooling with modern safety. From the dual-lock visor system to the revised eyeport and venting, every detail is aimed at confidence and consistency on track.
The ST6 improves on the market-leading ST5 in key areas:
10% lighter than Stilo ST5
26% more airflow than Stilo ST5
11% more visibility
More comfortable liner and cheek pads
More shell sizes for lower weight
Improved visor construction for durability and ease of care
Higher quality visor hardware for increased reliability
Stilo ST6 FN ABP 8859-2024 Carbon Fiber Auto Racing Helmet Features
Puro Tech, Stilo's carbon fiber manufacturing approach minimizes extra coatings to reduce mass while maintaining protection.
New shell size options: Stilo ZERO and ABP helmets are now offered in four shell sizes to deliver the smallest, lightest shell appropriate for your head.
Increased airflow design: redesigned front intake and new top vents route air through EPS channels to reduce sweat and moisture.
Increased downward visibility: a wider eyeport speeds up belt fastening and improves situational awareness.
Interior comfort: reshaped cheek pads stabilize fit and comfort at speed.
Injection-molded visor: improved optical clarity with a washable high-performance anti-fog treatment.
Dual visor lock – compliant with FIA standards in both closed and vented positions.
Updated visor hardware: smoother actuation and easier installation; available in anodized finishes.
Stilo ST6 FN ABP Helmet Details
Manufacturer: Stilo Helmets
Manufacturer part number: AA0810AF1WY
Homologation: FIA 8859-2024 ABP
Certification: Snell SA2025
Compatible shields: Stilo ST6 ABP helmet shields
Open-ear FN design for maximum awareness and cooling
Other Versions of the Stilo ST6 Racing Helmet
Stilo ST6 GT SA2025 Carbon Fiber Helmet
Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet
Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet
Stilo ST6 GT Composite Helmet
Stilo ST6 FN 8860 Carbon Fiber ABP Helmet
Stilo ST6 GT 8860 Carbon Fiber Helmet
Stilo ST6 FN 8860 Carbon Fiber Helmet
Stilo ST6 FN Carbon Fiber Helmet
Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet
Stilo ST6 FN ABP Helmet Sizing Chart
What's Changing in SA2025 Auto Racing Helmets?
SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020‚a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements.
Key SA2025 Helmet Safety Enhancements:
Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes.
Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports.
In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed.
Stilo ST6 FN ABP 8859-2024 / SA2025 Helmet FAQs:
Is this helmet Snell SA2025 certified? Yes, this helmet has both SA2025 certification and FIA 8859-2024 ABP homologation.
What does ABP mean? ABP indicates additional frontal protection meeting the FIA's Advanced Ballistic Protection requirement.
What's the difference between Stilo's FN and GT helmets?
The ST6 GT is designed for closed-cockpit cars (and is often marketed for that “GT” style car environment). It features molded-in side ports for forced air, comms, and/or hydration kits integrated into the helmet shell itself.
The ST6 FN is optimized for open-cockpit, formula / sprint / open-wheel style cars. It has an aerodynamic advantage because it does not feature the side ports present on the GT model.
Can I use ST5 shields on the ST6? No. The ST6 uses its own shield family; choose ST6-specific shields and hardware.
This helmet will ship with signature required for delivery.
Stilo ST6 Offshore Composite Helmet SA2025
$1,149.95
Stilo ST6 Offshore Composite SA2025 Racing Helmet
Stilo ST6 Offshore Composite SA2025: lighter, cooler, clearer
For over 25 years, Stilo has led helmet innovation, and the new ST6 line moves the benchmark again. With development input from top-level programs, the ST6 brings refined front and top aerodynamics, expanded airflow, and a wider field of view to help you strap in faster and drive with more confidence.
The ST6 Offshore Composite keeps weight down while adding ventilation and clarity where it matters. From the track-tested aero to the dual-lock visor mechanism, every update is about performance you can feel in the car.
The ST6 improves on the beloved ST5 in these key areas:
About 10% lighter than comparable ST5 models for reduced neck fatigue in long sessions
Approximately 26% more airflow to manage heat during hot-weather stints
Roughly 11% wider downward visibility for quicker belts and better cockpit awareness
Refined liner and cheek pads for stability at speed and all-day comfort
Expanded shell size range to optimize weight and fit
Re-engineered visor for durability and easy care with a washable anti-fog treatment
Updated visor hardware for smoother actuation and easy swaps
Stilo ST6 GT Composite Offshore Racing Helmet Features
Puro Tech: Stilo's composite manufacturing process minimizes excess coatings to keep mass low without compromising protection.
Added shell size: three shell sizes help deliver the smallest, lightest shell appropriate for your head size.
Stilo Helmets ST6 GT Composite Offshore Helmet Details
Manufacturer: Stilo Helmets
Manufacturer part number: DA0802RF2X
Homologation: FIA 8858-2015 (HANS posts)
Certification: Snell SA2025
Compatible shields: Stilo ST6 helmet shields
Noise-attenuating earmuffs included (ideal for intercom clarity in loud cabins)
Other Versions of the Stilo ST6 Racing Helmet
Stilo ST6 FN Carbon Fiber Helmet
Stilo ST6 GT SA2025 Carbon Fiber Helmet
Stilo Helmet ST6 FN 8859-ABP Helmet
Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet
Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet
Stilo ST6 FN Composite Helmet
Stilo ST6 FN 8859-ABP Helmet
Stilo ST6 GT 8860 Carbon Fiber Helmet
Stilo ST6 FN 8860 Carbon Fiber Helmet
Stilo ST6 FN 8860-ABP Carbon Fiber Helmet
Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet
Stilo ST6 GT Composite Offshore Racing Helmet Sizing Chart
Customers who typically wear a size 59 in other brands often prefer a Stilo size 61 (large shell). If you are between sizes or prefer a tighter fit, consider the smaller option.
What's Changing in SA2025 Auto Racing Helmets?
SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020‚ is a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements.
Key SA2025 Helmet Safety Enhancements:
Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes.
Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports.
In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed.
Stilo ST6 Offshore Composite SA2025 Helmet FAQs:
Does the ST6 Offshore Composite meet Snell SA2025? Yes, this listing reflects the SA2025 certification for U.S. auto racing.
What makes the Offshore version different? It includes noise-attenuating earmuffs designed to reduce cabin noise and improve intercom clarity.
Can I use my ST5 shields on the ST6? No, the ST6 uses its own shield system; choose ST6-specific shields and hardware.
How should I pick my size? Measure head circumference and consult the size chart; if youre between sizes, many drivers prefer the tighter option for stability at speed.
Is the visor anti-fog? Yes, the ST6 visor includes a washable, high-performance anti-fog treatment.
This helmet ships signature required.
Bell Helmets HP6 FIA 8860-2018 Carbon Fiber Racing Helmet
$2,459.95
Bell HP6 FIA 8860-2018 Carbon Fiber Racing Helmet
The Bell Helmets HP6 8860-2018 Carbon Fiber Racing Helmet brings technology developed for Bell's flagship HP7 platform into a lightweight, purpose-built helmet designed specifically for closed-cockpit racing. With its aggressive modern profile, advanced carbon fiber shell and wide eyeport, the HP6 is engineered for professional and serious amateur racers who demand maximum protection without sacrificing visibility, airflow or comfort.
Homologated to the demanding FIA 8860-2018 standard, the HP6 combines an ultra-lightweight advanced carbon shell with a multi-density, multi-piece energy-management liner. The result is a premium competition helmet designed for high-level road racing, endurance racing, GT competition and other closed-cockpit motorsports.
Advanced Carbon Fiber FIA 8860-2018 Protection
The HP6 uses Bell's advanced full carbon fiber shell construction to provide exceptional strength while minimizing helmet weight. Beneath the carbon shell is an advanced multi-density, multi-piece liner engineered to maximize energy absorption and impact performance.
FIA 8860-2018 homologation places the HP6 among Bell's high-performance competition helmets, making it an excellent choice for racers competing in series that require one of motorsport's most demanding helmet standards.
Wide Eyeport Designed for Closed-Cockpit Racing
Bell developed the HP6 specifically around the needs of drivers in closed-cockpit race cars. Its wide eyeport provides an extended field of vision, helping improve awareness of mirrors, competitors, apexes and cockpit controls.
The helmet uses Bell's SE06 3mm shield system, giving drivers access to compatible clear, tinted and specialty visor options for changing track and lighting conditions.
Advanced Ventilation and Forced-Air Compatibility
Strategically positioned extraction vents help maximize cooling and air circulation inside the HP6. For racers using external driver-cooling systems, an optional top forced-air intake can be installed on either the left or right upper ventilation ports.
Aftermarket forced-air systems are also available with Quick Lock V10 connections and compatibility with Maglock-style cooling connections, making the HP6 adaptable to a wide range of professional cockpit cooling configurations.
Integrated Communications and Hydration Capability
Integrated channels inside the HP6 face piece provide routing options for radio communication components, hydration tubes and drinking valves. This allows racers to configure the helmet for endurance racing and other applications where communication and hydration systems are essential.
Optional ear cups can also be installed to increase noise isolation inside loud closed-cockpit race cars. Racers requiring a fully integrated radio and hydration package can also consider Bell's dedicated HP6 RD configurations.
Bell HP6 8860-2018 Carbon Fiber Helmet Features
FIA 8860-2018 homologated racing helmet
Ultra-lightweight advanced full carbon fiber shell
Designed specifically for closed-cockpit racing
Wide eyeport for enhanced driver visibility
Advanced multi-density, multi-piece impact liner
Dark grey high-strength, high-comfort flame-resistant interior
Integrated channels for hydration and radio system installation
Extraction vents designed to maximize cooling and airflow
Optional top forced-air intake can be mounted on either side
Compatible with Quick Lock V10 forced-air systems
Compatible with Maglock-style cooling connections
Optional ear cups available for increased noise insulation
Factory-installed HANS anchors
Bell HP helmet bag included
Matte carbon fiber finish
Bell HP6 Helmet Details
Manufacturer: Bell Helmets
Manufacturer Part Number: 11400
Helmet Model: HP6
Construction: Advanced full carbon fiber shell
Finish: Matte carbon fiber
Homologation: FIA 8860-2018
Interior: Dark grey high-strength, high-comfort FR fabric
HANS Anchors: Factory installed
Shield Type: Bell SE06 3mm
Helmet Bag: Bell HP helmet bag included
Optional Bell HP6 Equipment
Top forced-air intake systems
Quick Lock V10 forced-air connections
Optional noise-isolating ear cups
Radio communication components
Hydration tube and drinking valve systems
Compatible Bell SE06 replacement and tinted shields
Alternative interior colors available by special order
What's Included With the Bell HP6
Bell HP6 FIA 8860-2018 Carbon Fiber Racing Helmet
Clear Bell SE06 3mm DSAF shield installed
Factory-installed HANS anchors
Plastic tear-off posts installed
Bell HP helmet bag
Hex wrench
Bell HP6 8860-2018 Sizing Chart
Bell HP6 8860-2018 Helmet FAQs
Is the Bell HP6 FIA 8860-2018 homologated?Yes. The Bell HP6 is homologated to the FIA 8860-2018 high-performance racing helmet standard.
Is the Bell HP6 designed for closed-cockpit racing?Yes. Bell specifically developed the HP6 for closed-car environments, combining a wide eyeport with ventilation, communication and hydration options suited to GT, endurance and other enclosed race cars.
Does the Bell HP6 include HANS anchors?Yes. Factory-installed HANS anchors are included as original equipment.
Can the Bell HP6 be connected to a forced-air cooling system?Yes. Optional top forced-air intakes can be installed on either the left or right upper ventilation ports. Bell also offers aftermarket forced-air solutions compatible with Quick Lock V10 and Maglock-style systems.
Can radio communications be installed in the HP6?Yes. The helmet includes integrated routing channels for radio communication equipment and hydration components. Bell also offers dedicated HP6 RD versions with integrated communications and hydration equipment.
Can ear cups be installed in the Bell HP6?Yes. Optional ear cups can be installed to provide additional noise insulation in loud race-car environments.
Which shield fits the Bell HP6?The Bell HP6 uses the Bell SE06 3mm shield platform. Compatible clear, tinted and specialty shields are available separately.
Does the Bell HP6 include a helmet bag?Yes. A Bell HP helmet bag is included with the helmet.
Stilo ST5 Side Air Adapter Hose
$49.95
Stilo ST5 Side Air Adapter Hose
Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone.
This adapter hose allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet.
MUST BE USED IN CONJUCTION WITH SIDE AIR KIT YA0653.
OMP ONE EVO FX Gloves | FIA Racing Gloves
$299.00
OMP ONE EVO FX Gloves
The OMP ONE EVO FX Gloves are professional-level racing gloves developed for drivers who demand precise steering feedback, dependable grip, and lasting comfort during demanding competition. Their advanced pre-curved shape supports a natural driving position, helping reduce material bunching and unnecessary hand fatigue during extended sessions.
Lightweight honeycomb fabric promotes airflow throughout the glove, while strategically positioned silicone grip zones improve steering control without sacrificing sensitivity. External finger seams reduce pressure points, and the internally stitched thumb provides refined feel when operating steering-wheel buttons, rotary controls, and paddle shifters.
Ergonomic Construction for Natural Steering Control
The ONE EVO FX is shaped around the position a driver’s hands naturally assume on the steering wheel. Its pre-curved fingers and palm reduce resistance when closing the hand, allowing the driver to maintain a secure grip with less effort.
This ergonomic construction minimizes excess material across the palm and fingertips, helping preserve tactile feedback while reducing fatigue during long races, endurance stints, and repeated high-load steering inputs.
Directional Silicone Grip Zones
Strategically arranged silicone sections provide traction where the glove makes the most contact with the steering wheel. The directional grip pattern helps resist unwanted hand movement during cornering, braking, and rapid steering corrections.
Rather than covering the entire palm with a heavy reinforcement layer, the focused silicone layout maintains a direct connection with the wheel and preserves the sensitivity needed for precise vehicle control.
External Finger Seams for Reduced Pressure
External seams move potentially irritating stitching away from the inside of the fingers. This construction reduces pressure points and improves comfort during extended periods behind the wheel.
The smoother internal finger area also helps the glove conform more closely to the hand, limiting distractions caused by bulky seams or excess material.
Internally Stitched Thumb for Enhanced Feedback
The thumb uses an internal seam configuration to improve sensitivity and control around modern steering-wheel equipment. This construction gives the driver a more precise feel when using push buttons, switches, rotary controls, and paddle-shift systems.
Combining external finger seams with an internally stitched thumb allows OMP to optimize different areas of the glove for their specific driving functions.
Breathable Honeycomb Fabric
Lightweight honeycomb fabric across the outer glove encourages airflow and helps manage heat inside the cockpit. The breathable construction is especially beneficial during endurance competition, warm-weather events, and long sessions where moisture buildup can affect comfort.
The flexible material follows the hand through repeated steering movements without creating unnecessary stiffness or bulk.
Slanted Elastic Cuff
An elasticated cuff keeps the ONE EVO FX securely positioned throughout the session. Its slanted wrist opening follows the natural angle of the forearm, making the glove easier to put on while creating a comfortable overlap with compatible racing-suit sleeves.
The streamlined cuff eliminates the need for a bulky external adjustment strap and maintains a clean, competition-focused fit.
FIA 8856-2018 Homologated Protection
The OMP ONE EVO FX Gloves are homologated to the FIA 8856-2018 standard for fire-resistant driver clothing. This certification makes them suitable for many professional, amateur, and club-level motorsport events requiring current FIA-approved racing gloves.
Drivers should confirm the specific safety-equipment requirements of their racing series or sanctioning organization before competition.
OMP ONE EVO FX Glove Features
FIA 8856-2018 homologated racing-glove construction
Advanced pre-curved shape supports a natural driving position
Directional silicone grip zones improve steering control
Low-profile grip layout preserves tactile feedback
External finger seams reduce internal pressure points
Internal thumb seams improve sensitivity around wheel controls
Breathable honeycomb fabric promotes airflow
Lightweight materials help reduce hand fatigue
Elastic cuff provides secure retention
Slanted wrist opening allows easier entry
Updated OMP competition styling
Available in multiple color combinations
OMP ONE EVO FX Glove Specifications
Manufacturer: OMP
Model: ONE EVO FX
Product Type: Fire-Resistant Auto Racing Gloves
Construction: Lightweight Pre-Curved Design
Outer Fabric: Breathable Honeycomb Material
Grip: Directional Silicone Zones
Finger Seams: External
Thumb Seam: Internal
Cuff: Elasticated with Slanted Opening
Available Sizes: XS, S, M, L, XL, and XXL
Homologation: FIA 8856-2018
Available Colors
White — 020
Red — 061
Black — 071
Fluorescent Yellow — 099
Navy Blue/Cyan — 244
Why Choose the OMP ONE EVO FX?
The ONE EVO FX stands apart through its carefully balanced seam construction, ergonomic shaping, and directional grip design. Every major contact area is configured to improve comfort or control, from the pressure-reducing external finger seams to the sensitive internally stitched thumb.
For drivers competing in sprint, endurance, touring-car, formula, or GT environments, the OMP ONE EVO FX provides a refined combination of certified protection, ventilation, steering precision, and fatigue-reducing comfort.
OMP ONE EVO FX Racing Glove Size Chart
Frequently Asked Questions
Are the OMP ONE EVO FX Gloves FIA approved?Yes. The gloves are homologated to the FIA 8856-2018 standard for fire-resistant driver apparel.
What makes the ONE EVO FX different from a basic racing glove?It uses pre-curved ergonomics, directional silicone grip zones, breathable honeycomb fabric, and specialized seam placement to improve steering precision and long-session comfort.
Why are the finger seams positioned externally?External finger seams move the stitching away from the inside of the fingers, reducing pressure points and improving comfort.
Why does the thumb use an internal seam?The internally stitched thumb provides a closer, more sensitive feel when operating steering-wheel buttons, rotary controls, and paddle shifters.
Do the gloves have silicone across the palm?Yes. Strategically positioned silicone grip zones improve traction while preserving steering-wheel sensitivity.
Are the OMP ONE EVO FX Gloves suitable for endurance racing?Yes. Their pre-curved shape, breathable construction, and pressure-reducing seams are well suited for long sessions and endurance stints.
What sizes are available?The OMP ONE EVO FX Gloves are available in sizes XS through XXL.
How should the gloves fit?They should fit closely around the palm and fingers without restricting movement or leaving excess material at the fingertips.
How should the OMP ONE EVO FX Gloves be cleaned?Follow the care instructions supplied by OMP. In general, avoid bleach, harsh chemicals, machine drying, and direct high heat that could damage the fire-resistant materials or silicone grip.
