Helmet Hardware & Parts

Arai GPV-R Interior Pad IV Dial In the Crown Fit of Your Arai GPV-R The Arai GPV-R Interior Pad IV lets drivers fine-tune the crown fit of XL GPV-R helmets by changing the thickness of the interior padding. Whether you're replacing worn padding or looking for a slightly snugger fit, a fresh interior pad can make a noticeable difference in how your helmet feels. Interior Pad IV is designed specifically for size XL Arai GPV-R helmets and is available in two thicknesses to help you achieve the right combination of comfort and security. Choose Your Interior Pad Thickness Thicker interior padding creates a snugger crown fit, while the standard pad maintains the original factory fit of your XL GPV-R. 10mm: Optional thicker pad for a snugger XL fit 7mm: Standard factory thickness for XL Refresh the Fit of Your Helmet Helmet padding naturally compresses with use. If your GPV-R has started to feel a little roomier around the crown, the shell may still fit perfectly—the interior padding may simply be showing its age. Replacing the interior pad can restore a more secure, supportive feel and freshen up the inside of your helmet. Arai GPV-R Interior Pad IV Details Fits Arai GPV-R size XL helmets Replacement crown interior pad Available in 7mm and 10mm thicknesses 7mm is the standard factory thickness for XL 10mm provides a snugger crown fit Ideal for replacing worn or compressed interior padding Fit Tip: If you're happy with the original fit of your XL GPV-R, choose the standard 7mm pad. If you'd like a little less room around the crown, the 10mm pad provides a snugger fit. Important: Interior Pad IV fits Arai GPV-R helmets in size XL only. Other GPV-R helmet sizes use different interior pads.

Arai GPV-R Interior Pad III Dial In the Crown Fit of Your Arai GPV-R The Arai GPV-R Interior Pad III lets drivers fine-tune the crown fit of Medium and Large GPV-R helmets by changing the thickness of the interior padding. Whether you need a little more room or a more secure fit, swapping the interior pad is an easy way to personalize how your GPV-R feels. It's also an excellent way to refresh an older helmet. Interior padding naturally compresses with use, and a fresh Interior Pad III can restore much of the snug, supportive feel your GPV-R had when it was new. Choose Your Interior Pad Thickness Thicker interior pads create a snugger crown fit, while thinner pads provide additional room. Interior Pad III is specifically designed for Medium and Large GPV-R helmets. 12mm: Optional thicker fit for Medium and Large 10mm: Standard thickness for Medium; optional thicker fit for Large 7mm: Standard thickness for Large; optional thinner fit for Medium Refresh the Fit of Your Helmet If your GPV-R has started to feel a little roomier around the crown, the helmet may not be the problem—the padding may simply have compressed over time. Replacing the interior pad can restore a more secure, supportive feel while freshening up the inside of your helmet. Arai GPV-R Interior Pad III Details Fits Arai GPV-R Medium and Large helmets Replacement crown interior pad Available in 7mm, 10mm, and 12mm thicknesses Allows crown fit to be adjusted without changing helmet size Ideal for replacing worn or compressed interior padding Fit Tip: If your GPV-R feels too tight around the crown, choose a thinner interior pad. If you need a snugger fit around the top of your head, choose a thicker pad. Important: Interior Pad III fits GPV-R helmets in sizes Medium and Large only. Other GPV-R helmet sizes use a different interior pad.

Arai GPV-R Interior Pad II Fine-Tune the Crown Fit of Your Arai GPV-R A great helmet fit is about more than cheek pressure. The Arai GPV-R Interior Pad II allows you to fine-tune the fit around the crown and top of your head, helping you achieve a more secure, comfortable feel inside your GPV-R. It's also an easy way to refresh a helmet whose interior has compressed with use. Swap in a fresh Interior Pad II to restore the supportive feel of your GPV-R without replacing the entire helmet. Choose Your Interior Pad Thickness Thicker interior pads create a snugger crown fit, while thinner pads provide additional room. Choose the thickness that best matches your helmet size and desired fit. 12mm: Optional thicker fit for XS and Small 10mm: Standard thickness for XS; optional thicker fit for Small 7mm: Standard thickness for Small; optional thinner fit for XS Refresh the Fit of Your Helmet Helmet padding naturally compresses over time. If your GPV-R has started to feel a little roomier around the crown, replacing the interior pad can restore a more secure, supportive fit and freshen up the inside of the helmet. Arai GPV-R Interior Pad II Details Fits Arai GPV-R helmets Replacement crown interior pad Available in 7mm, 10mm, and 12mm thicknesses Allows crown fit to be fine-tuned without changing helmet size Ideal for replacing worn or compressed interior padding Fit Tip: If your GPV-R feels too tight around the crown, choose a thinner interior pad. If you need a snugger fit around the top of your head, choose a thicker pad.

Arai GPV-R Helmet Cheek Pads Fine-Tune the Fit of Your Arai GPV-R Your helmet can be the right size and still need a little fine-tuning. Arai GPV-R Cheek Pads let you customize the fit around your cheeks and jaw for a more secure, comfortable feel behind the wheel. Whether you're replacing worn-out padding or dialing in the fit of a new GPV-R, multiple thickness options make it easy to add a little room—or snug things up for a more precise fit. Choose Your Cheek Pad Thickness Thinner cheek pads provide more room inside the helmet, while thicker cheek pads create a snugger fit. This allows you to adjust cheek pressure without changing the helmet's primary shell or crown fit. 12mm: Thinner option for significantly more cheek room 15mm: Thinner option for additional cheek room 20mm: Standard cheek pad thickness for size Large 25mm: Standard cheek pad thickness for sizes XS, Small, Medium, and XL 30mm: Thicker option for a snugger cheek fit 35mm: Extra-thick option for increased cheek support 40mm: Thickest option for the snuggest available cheek fit Refresh an Older Helmet Cheek pads naturally compress with use. If your GPV-R doesn't feel as secure as it once did, a fresh set of cheek pads can restore much of that snug, supportive feel without replacing the entire helmet. Arai GPV-R Cheek Pad Details Fits Arai GPV-R helmets Sold as a replacement cheek pad set Available in multiple thicknesses for personalized fit Ideal for replacing worn or compressed cheek pads Allows cheek and jaw fit to be adjusted independently of helmet size Fit Tip: If your current cheek pads feel too tight, choose a thinner set. If the helmet feels loose around your cheeks or jaw, choose a thicker set.

Stilo ST5 Shield and Peak Pivot Kit The Stilo ST5 Shield and Peak Pivot Kit allows a Stilo Peak Visor and Shield to be used together on all ST5 helmets. The visor will have to be able to open and close and the peak visor can be adjusted to the perfect angle to keep the sun out of your eyes. Stilo has a reputation for excellence and the ST5 peak and visor kit will not disappoint. Remember, if you are using a shield in combination with a visor, ( Stilo ST5 Short Sun Visor or other visors of your choice ) it is recommended that you order this kit for the visor and shield to all go on a Stilo helmet.  Stilo ST5 Shield and Peak Pivot Kit Manufacturer: Stilo Manufacturer part number: YA0864 Fitment: Stilo ST5 versions

Stilo Venti WRX Peaks Carbon Peak and Peak Set Options for Stilo Venti WRX Helmets The Stilo Venti WRX Peak lineup gives drivers a purpose-built way to equip their WRX helmet for off-road, rally, dirt, and raid competition. This single listing brings the WRX carbon peak options, fitting kits, and raid peak sets together so you can select the exact Stilo part number needed for your helmet setup. Choose from standard carbon peaks, extended carbon peaks, fitting kits, and WRX Raid peak sets. These options are built specifically for Stilo Venti WRX helmet configurations and allow racers to tailor their setup for sun control, visibility, and event-specific helmet use. Available WRX Peak Options YA0280 Carbon Peak Fitting Kit YA0281 Carbon Peak YA0282 Extended Carbon Peak YA0283 Extended Carbon Peak YA0298 Short Peak Fitting Kit YA0280-A WRX Raid Short Peak Set YA0282-A WRX Raid Extended Peak Set YA0283-A WRX Raid Extended Peak Set Zero Made for Stilo Venti WRX Helmet Setups These WRX peak options are designed for drivers who want to configure a Stilo Venti WRX helmet for demanding racing environments. Peak kits and sets provide dedicated Stilo fitment, while the carbon construction gives the helmet a clean, premium race-ready look. Peak, Fitting Kit, and Raid Set Selection Select the variant that matches the Stilo WRX accessory configuration you need. The listing includes separate carbon peak components, peak fitting kits, and complete WRX Raid peak sets so you can order the correct part without splitting the family across multiple pages. FAQs Are these parts made for Stilo Venti WRX helmets?Yes. These are WRX peak accessories listed for Stilo WRX helmet fitment. What options are included in this listing?This listing combines the Stilo WRX carbon peaks, extended peaks, fitting kits, and Raid peak sets into one Shopify product with selectable variants. What is the difference between a peak and a peak set?A peak is the peak accessory itself, while the WRX Raid peak set listings are sold as a separate assembled set option from Stilo. Are the fitting kits listed here?Yes. The YA0280 Carbon Peak Fitting Kit and YA0298 Short Peak Fitting Kit are included as variant choices. How do I order the correct part?Select the variant by Stilo part number and description so the exact WRX peak, kit, or set needed is added to the cart. Build out your Stilo Venti WRX helmet with the WRX peak, fitting kit, or Raid peak set that matches your racing setup.

Stilo ST5 Top Ram Air Vent Kit Force cool air into your helmet with the Stilo ST5 Top Ram Air Vent Kit. Most formula car, open-wheel, and karting drivers use these high-impact ABS clear plastic ram air vents to keep cool. Do they work? They work amazingly well. Jump out of the draft and feel a rush of cool air as you make that offline, last-corner pass. STILO ST5 TOP RAM AIR VENT KIT DETAILS Manufacturer: Stilo Manufacturer part number: YA0822 Qty in kit: two (sold as a pair) Material: high-impact plastic Attaches how: 3M VHB double-sided tape Fits all Stilo ST5 helmets Does not fit Stilo ST4 helmets; use Stilo YA0620 ST4 Ram Air Intake Kit For those customers in open-cockpit cars, some additional aerodynamics may be desired. We offer a top-air vent to help move cooler air into the helmet, a rear spoiler for stability and slight downforce, and a vent block-off kit to allow for more control of the airflow inside the helmet. All pieces are made of clear plastic, and easily adhere with pre-installed double-sided adhesive tape.

Stilo ST5 Front Spoiler Kit For Open Cockpit Racers, The Stilo ST5 Front Spoiler stabilizes your helmet and stops buffeting and lifting at high speeds. Used in WKA kart racing to compensate for the extreme upright seats some kart racers have. For those customers in open cockpit cars, some additional aerodynamics may be desired by the driver. We offer a front spoiler to help split air around the helmet. No more helmet lifting and instability under the highest speeds in a car with questionable driver aero. All pieces are made of clear plastic, and adhere with double-sided adhesive tape. Stilo ST5 Front Spoiler Kit Details: Manufacturer: Stilo Manufacturer part number: YA0823 Reduce Helmet Buffeting Removable Fits All Stilo ST5 Models Can be painted

Stilo Ear Pillows for ST4 and ST5 Stilo Spare Ear Pillows for ST4 and ST5 Details: Manufacturer: Stilo Manufacturer new part number: YA0016 Fitment: All ST4 and ST5 helmets

Stilo Seal Visor Rubber ST5, ST4 F and ST4 GTW Replacement rubber seal for your Stilo helmet visor that fits ST5, ST4 F and ST4 GTW style helmets. This Genuine Stilo part fits the eyeport seal of all modern Stilo full face helmets. Stilo Seal Visor Rubber ST5, ST4 F and ST4 GTW Details: Manufacturer: Stilo Manufacturer part number: YA0660 Fitment: ST4F All Models, ST4W All Models, Stilo ST5 Models, Trophy and WRC, SA2010, SA2015, FIA 8858, FIA 8859, FIA 8860 In general, YA0660 is the eye port rubber for all ST5 except ABP. YA0874 can be used on all helmets both auto and karting.

Bell Forced Air Adaptor QL Nozzle 90° Bell's forced air helmets feature the new Quick Lock forced air nozzle that locks the forced air connector in place and allows for easy release when it's time to leave the vehicle. BELL QUICK LOCK 90° NOZZLE DETAILS Manufacturer: Bell Racing Helmets Manufacturer Global part number: 2070067 Manufacturer old part number 2029001 Angle: 90º Material: soft neoprene The smaller nozzle design helps accelerate airflow into the helmet with more force. The Quick Lock nozzle can be used with traditional 1.5-inch diameter forced air hoses by using the air adaptor kits that connect the hose with the Bell Quick Lock nozzle. This Bell part also connects to the Stilo New Style Top Air Adapter perfectly.

Bell Forced Air Adaptor QL Nozzle Straight Bell Helmets 2070066 Helmet Hose Adapter Small helmet fitting to large supply hose. This Bell Adapter attachment hose to air vents on Bell helmets. For use with the smaller 0.875" helmet air intake tubes. This Bell part also connects to the Stilo New Style Top Air Adapter perfectly. Bell Forced Air Adaptor QL Nozzle Straight Details: Manufacturer: Bell Big end I.D. 1.3225" & Big end O.D. 1.6230" Small end I.D. .8750" & Small end O.D. .9915" Manufacturer US part number: BR-2029000 Manufacturer Global part number: 2070066 Color: Black Material: Synthetic hi-temp

Stilo Bottom Rubber Trim for ST5, CMR, and KRT Did you put your Stilo helmet on your Hans device then then in your helmet bag? After a while, the Hans grip material will start to wear through the Stilo bottom rubber seal. One way to prevent this is to place a towel between your Hans device and your helmet so keep the abrasion to a minimum. If you have not been doing this, the this Stilo Replacement Rubber Seal For the Bottom of Your Stilo Helmet is the fix. Fits all Stilo SA2010 and SA2015 helmets. This is a Genuine Stilo Part for a perfect fit. Stilo Bottom Rubber Trim for ST5, CMR, and KRT Details: Manufacturer: Stilo Manufacturer new part number: YA0874 Fitment: ST5, CMR and KRT Helmets In general, YA0660 is the eye port rubber for all ST5 except ABP. YA0874 can be used on all helmets both auto and karting.

Molecule Anti-Fog Spray 4oz improves visibility and is designed specifically to inhibit fog causing moisture on the interior of shields. Apply to the inside surface of visors, goggles or wind screens to guard against distortion. Molecule Rain Repel Spray Details: Manufacturer: Molecule Labs Manufacturer part number: MLHAF41 Size: 4oz Apply to visors, goggles, windshields or windscreens and watch rain fly off Spray on, allow slight haze, reapply Molecule Anti-fog to ensure uniform coverage Wipe final haze with dry cloth and watch rain easily keep clear Environmentally friendly, biodegradable and non-hazardous DiscoveryParts Pro Tip: Do not use any Molecule shield product on your Stilo visors as it is not compatible with the Stilo special anti-fog coating.

Molecule Rain Repel Spray 4oz Improves visibility in wet weather. Easy to apply formula repels rain and water. For use on windshields, visors, goggles or windscreens. RAIN REPEL DETAILS Manufacturer: Molecule Labs Manufacturer part number: MOL-MLHRR-41 Size: 4oz Apply to visors, goggles, windshields or windscreens and watch rain fly off Spray on, allow slight haze, reapply Molecule RAIN REPEL to ensure uniform coverage Wipe final haze with dry cloth and watch rain easily keep clear Environmentally friendly, biodegradable and non-hazardous Designed to increase the surface tension of water to quickly shed large beads from visors. As rain falls, it sticks to the microscopic edges on the surface of visors or screens. Rain Repel reduces the friction between water droplets and the surface to keep vision clear. Pro Tip: Do not use any Molecule shield product on your Stilo visors as it is not compatible with the Stilo special anti-fog coating.