all

Sabelt X-Pad Off-Road Racing Seat (Waterproof) The Sabelt X-Pad Off-Road Racing Seat is a compact, full-containment racing seat engineered for vehicles with limited cockpit space. Designed for racers who demand the protection of a halo-style seat without sacrificing fitment flexibility, the X-Pad delivers FIA-approved safety, exceptional driver support, and innovative waterproof construction in one of the most compact containment seats available. Perfect for vehicles such as the Mazda Miata, Chevrolet Corvette, compact off-road race vehicles, rally cars, and other tight-cockpit applications, the X-Pad was specifically developed to maximize interior driver space while minimizing overall seat dimensions. By utilizing thinner, high-density foam padding and redesigning the outer shell profile, Sabelt was able to significantly reduce the seat's exterior dimensions without compromising comfort or driver accommodation. The result is a racing seat that fits where many full-containment seats cannot while still comfortably accommodating a wide range of drivers. Compact Full-Containment Design The X-Pad provides the enhanced lateral support and head protection of a modern containment seat while maintaining a remarkably compact footprint. Its optimized shoulder and hip geometry helps improve driver protection and control while fitting vehicles where traditional halo seats may be too large. This innovative design makes the X-Pad an excellent choice for road racing, endurance racing, autocross, time attack, rally competition, off-road racing, and high-performance track-day vehicles. Waterproof Construction Unlike traditional racing seats that absorb moisture and dirt, the Sabelt X-Pad features a waterproof design that can be easily cleaned after use. Whether exposed to mud, dust, rain, or harsh off-road conditions, the X-Pad is built to withstand demanding environments while maintaining its appearance and performance. When it's time to clean the seat, simply hose it off and get back to racing. Sabelt X-Pad Features FIA 8855-1999 homologated racing seat Compact full-containment design for small cockpit vehicles Integrated halo-style head protection Waterproof construction for off-road and endurance applications Optimized shoulder and hip geometry inspired by FIA 8862 safety principles Thin, high-density foam padding for maximum interior space Lightweight fiberglass composite shell Excellent fitment for Miata, Corvette, and other compact race cars Outstanding lateral support and driver containment Standard side-mount installation Technical Specifications Homologation: FIA 8855-1999 Seat Type: Full-Containment Racing Seat Construction: Fiberglass Composite Shell Mounting: Standard Side Mount Weight: 8.75 kg (19.3 lb) Waterproof: Yes Integrated Head Protection: Yes Why Choose the Sabelt X-Pad? The Sabelt X-Pad solves one of the most common challenges faced by racers: fitting a modern containment seat into a compact cockpit. Its space-efficient design, FIA-approved safety, waterproof construction, and outstanding driver support make it an excellent choice for sports cars, endurance racers, off-road vehicles, and track-day builds where space is at a premium. ```

CALPIER REBUILD KIT FOR ALFA GUILIA CCM FRONT 28mm/32mm/38mm GiroDisc CCRK1-209 front caliper rebuild kit for Alfa Guilia CCM front caliper with 28mm/32mm/38mm seals. Track days can be especially hard on the piston seals and dust boots in your brake calipers. Heat, in particular, will do a number on them. (Titanium heat shields behind your pads can help with that.) This kit is put together from the highest-quality components to rebuild a brake caliper back to like-new condition. One kit is required per caliper (we suggest doing them both as long as you're doing it). Once you rebuild them, get the Ti heat shields as well and lengthen the interval between rebuilds. The shields and seals are available as a kit for convenience (and a bit of savings). We only source superior quality brake components (brakes for track use are serious business); some kits don't take it as seriously. Any questions give us a call, we're happy to help!

Acura NSX (2016-present) Alfa Romeo Giulia Quadrifoglio, converted to iron rotors Audi C7 RS6 & RS7 Chevrolet Camaro ZL1 (5th & 6th Gen) Chevrolet Camaro Z/28 (5th Gen) Chevrolet C7 Corvette Z06 & Grand Sport (all) McLaren MP4-12C, 570S & 650S Mercedes-AMG GT S/C/R with OEM iron rotors The Girodisc S/S or "street/strip" pads represent the ultimate in high performance brake pads. The semi-metallic compound maintains a consistent coefficient of friction from 0 to 1000 degrees making them an ideal option for people that are looking for a dual purpose pad that will work well on both the street and the race track. The formula has very little compressibility ensuring a very firm pedal and immediate bite which has made the S/S pads a favorite among people who autocross and those who demand the most out of their street cars. Inevitably these will dust more than our Magic pads however with the addition of our anti-noise shims that come on every set of pads they will not make any noise if they are bed in properly.

Girodisc Alfa Romeo Giulia Quadrifoglio with CCM Rotors - Rear Rotors The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. Girodisc Alfa Romeo Giulia Quadrifoglio with oem CCM rotors Details: Manufacturer: Giro Disc Manufacturer Part Number: A2-209 Surface: Slotted Material: Steel Intended for Street/Track Use: Yes For Use with Stock Calipers: Yes Rotor Construction: Vented Rotor Style: Slotted surface Rotor Material: Iron Rotor Finish: Black E-coat Quantity: Sold pair (one axle set) Girodisc Alfa Romeo Giulia Quadrifoglio with OEM CCM rotors - Rear Rotors Fitment: Alfa Romeo Giulia Quadrifoglio 2016+ Girodisc Advantages: GiroDisc brake kits are seen at every track weekend on very exotic and extreme track cars. What made GiroDisc owners leave their OEM rotors and upgrade to a 2 piece GiroDisc kit? Less Rotating Mass via 2 piece design Lightweight 6061-T6 Aluminum Hat Grade 12 floating hardware to allow the rotor to grow when heated Curved vane design creates a cooler rotor Significant cost reduction compared to OEM GiroDisc Rotor Hat: The GiroDisc rear central is manufactured using aircraft grade 6061-T6 aluminum. Less weight creates a huge advantage in acceleration and braking. Anyone who has spent the money for a lightweight double disk clutch kit with aluminum flywheel knows the importance of rotating mass. Using a lightweight rotor kit allows the brakes to decelerate the vehicle not the rotor. GiroDisc Floating Rotor Ring: Quality hi-carbon cast iron is the foundation of every GiroDisc brake rotor. Every rotor ring is made carefully in house at the GiroDisc factory in Washington state. The GiroDisc rotor utilizes a curved vane design that was originally developed in racing to act as a centrifugal air pump to force cooling air from the center of the rotor ring to the outside. This principle is similar to what is know as a squirrel cage fan design. By having impellers (vanes) between the two rotor faces, the air is moved radially, from the center outward, changing the direction of the airflow and increasing velocity. This design is mechanically strong, reliable very effective. Chances are your street cars heater blower motor and home furnace utilize GiroDisc Rotor Ring Hardware: The GiroDisc rotor ring and light-wight aluminum hat have a floating mount system, which utilizes 8 or 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These drive pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The drive pins are secured by grade 12 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads. GiroDisc Rotor Ring Replacement: Once the Girodisc system is in place, simply replace the cast iron rotor when needed. Your GiroDisc replacement rotor rings come complete with 2 new rotor rings and all required floating rotor hardware. This is a very simple task that is quite fun. The aluminum rotor hat usually does not ever need replacement unless bent or damaged. If you damaged has reached your GiroDisc hat, you almost have quite a bunch of other things to replace also. The hat is rugged and overly strong.

Girodisc Alfa Romeo Giulia Quadrifoglio with CCM Rotors - Front Rotors The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. Girodisc Alfa Romeo Giulia Quadrifoglio with oem CCM rotors Details: Manufacturer: Giro Disc Manufacturer Part Number: A1-209 Surface: Slotted Material: Steel Intended for Street/Track Use: Yes For Use with Stock Calipers: Yes Rotor Construction: Vented Rotor Style: Slotted surface Rotor Material: Iron Rotor Finish: Black E-coat Quantity: Sold pair (one axle set) Girodisc Alfa Romeo Giulia Quadrifoglio with OEM CCM rotors - Front Rotors Fitment: Alfa Romeo Giulia Quadrifoglio 2016+ Girodisc Advantages: GiroDisc brake kits are seen at every track weekend on very exotic and extreme track cars. What made GiroDisc owners leave their OEM rotors and upgrade to a 2 piece GiroDisc kit? Less Rotating Mass via 2 piece design Lightweight 6061-T6 Aluminum Hat Grade 12 floating hardware to allow the rotor to grow when heated Curved vane design creates a cooler rotor Significant cost reduction compared to OEM GiroDisc Rotor Hat: The GiroDisc front central is manufactured using aircraft grade 6061-T6 aluminum. Less weight creates a huge advantage in acceleration and braking. Anyone who has spent the money for a lightweight double disk clutch kit with aluminum flywheel knows the importance of rotating mass. Using a lightweight rotor kit allows the brakes to decelerate the vehicle not the rotor. GiroDisc Floating Rotor Ring: Quality hi-carbon cast iron is the foundation of every GiroDisc brake rotor. Every rotor ring is made carefully in house at the GiroDisc factory in Washington state. The GiroDisc rotor utilizes a curved vane design that was originally developed in racing to act as a centrifugal air pump to force cooling air from the center of the rotor ring to the outside. This principle is similar to what is know as a squirrel cage fan design. By having impellers (vanes) between the two rotor faces, the air is moved radially, from the center outward, changing the direction of the airflow and increasing velocity. This design is mechanically strong, reliable very effective. Chances are your street cars heater blower motor and home furnace utilize GiroDisc Rotor Ring Hardware: The GiroDisc rotor ring and light-wight aluminum hat have a floating mount system, which utilizes 8 or 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These drive pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The drive pins are secured by grade 12 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads. GiroDisc Rotor Ring Replacement: Once the Girodisc system is in place, simply replace the cast iron rotor when needed. Your GiroDisc replacement rotor rings come complete with 2 new rotor rings and all required floating rotor hardware. This is a very simple task that is quite fun. The aluminum rotor hat usually does not ever need replacement unless bent or damaged. If you damaged has reached your GiroDisc hat, you almost have quite a bunch of other things to replace also. The hat is rugged and overly strong.  

A2-266 Girodisc 2pc REAR Brake Rotors GT4 ClubSport This high-performance product is built to meet the demands of competitive racing. Designed for durability, precision, and track-day performance. Engineered for Performance on the Track This Girodisc system is a 380mm two-piece steel rotor and aluminum hat combination, a direct-replacement upgrade for the one-piece OEM GT4 Clubsport steel brakes. The A2-266 will bolt directly to the GT4 ClubSport and work perfectly with your OEM calipers. There are two main reasons for replacing your OEM rotors: first, the Girodisc rotors are designed to shed heat more effectively than the original rotors; second, the slotted Girodisc A2-266 will far outlast the OEM drilled rotors. When subjected to intense heat in a racing or track-day environment, the drilled holes in the OEM rotors originate cracks which can lead to rotor failure. When paired with the Girodisc A1-266 front rotors, your factory brake bias and ABS efficiency are maintained. When used with Pagid or PFC performance brake pads, and RF1 brake fluid (also available from Discovery Parts), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum.  The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations.  The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.   The rotor and hat mount together through a floating mount system which utilizes eight to ten high strength alloy steel drive pins manufactured by Girodisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by Grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

0458.08.13.44 (08 Compound) One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range.   Fits Mazda Miata, 1990-93, Rear

Discovery Parts is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most Girodisc products the same or next business day to ensure we meet your delivery deadline. Fits Nissan GT-R (R35, 2007+) The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. These Girodisc rear rotors are approx 18.8 lbs. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. The central hat section of the Girodisc rotor is made from strictly USA-sourced 6061-T6 aircraft specification aluminum. The disc is made from Girodisc's own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved-vane design, developed in racing to act as a centrifugal pump forcing cool air through the disc. The disc and hat have a floating mount system, which utilizes 12 high-strength alloy steel drive pins, manufactured in the US by Girodisc and cadmium plated for long-lasting corrosion resistance. These pins take the loads from braking while maintaining the axial and radial float between the hat and disc. They are secured by class 12.9 cap screws and hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise springs on the disc side, allowing the iron disc to expand as it heats up while eliminating the rattle and noise commonly associated with floating rotors. This float also allows the rotor to self center between the brake pads. Once the Girodisc system is in place, you simply replace the cast iron discs when needed. This reduces cost over time by allowing you to re-use the aluminum central hats. Sold/priced per pair

Goodridge G-Stop High Performance Stainless Brake Lines CHOOSE A KIT FOR THE FOLLOWING CARS: Porsche 718 (2017+ all) Porsche 981 (2013-16 all, including GT4 & Spyder) Porsche 987 (2005-12 all) Porsche 986 (1998-2004 all) Goodridge G-Stop high performance brake lines for the Porsche Boxster and Cayman consist of the finest quality PTFE inner hose covered by a braided stainless steel outer casing. This gives you a much firmer, more responsive brake pedal by eliminating the “spongy” feel that often accompanies stock rubber brake lines, making them ideal for the very high brake pressures seen during HPDE track days. G-Stop High Performance Brake lines are abrasion and corrosion resistant so they last a long time under harsh conditions. Goodridge G-Stop high performance brake lines are direct bolt-on replacements for all of the rubber brake lines in your Porsche's brake system1. Four brake lines are included in each kit, with hose ends and brake line brackets that match the car’s original equipment. Conforming to Federal Motor Vehicle Safety Standard Number 106, Goodridge G-Stop high performance brake lines are U.S. DOT certified and T.U.V. approved. All Goodridge G-Stop brake lines go through a nine-point Quality Assurance testing process that includes measuring tensile strength and the ability to sustain line pressures to 3,000 psi. GOODRIDGE G-STOP STAINLESS STEEL BRAKE LINE DETAILS Precise fit for your Porsche 718, 981, 987, or 986 Boxster/Cayman Incl. 2 Front Lines/2 Rear Lines/Adapters/Line Locators Greater braking efficiency Resistance to abrasion and corrosion Firmer pedal under heavy braking Added reliability, safety and brilliant looks Technically superior and race proven DOT, TUV, ADR, DEKRA, ARAICCC, ISO9001 Accredited. FMVSS 106 compliant DOT approved 1 Note: Brake components should be installed by a competent mechanic in a professional manner. Incorrect installation of brake components can be a major safety hazard.

A1-032 Girodisc 2pc Front Brake Rotors (OEM PCCB) FITS THE FOLLOWING CARS: Porsche 981 Boxster/Cayman (w/ OEM PCCB) Porsche 991 Carrera (w/ OEM PCCB) is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline. This Girodisc system upgrades your Porsche 981 or 991 equipped with factory PCCB brakes to a 350mm two-piece steel disc and aluminum hat. This two-piece floating rotor design will bolt directly to your Porsche front and work flawlessly with the OEM calipers. Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Girodisc rotors maintain the low rotational and unsprung mass of your PCCB rotors while being far more durable -- particularly when swapping wheels on and off at the race track. Combined with Pagid or PFC performance brake pads and RF-1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving. The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc. The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors. This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs. Sold/priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

A2-159 Girodisc 2pc Rear Brake Rotors (McLaren 570 - 650S - 600LT - 720S) This high-performance product is built to meet the demands of competitive racing. Designed for durability, precision, and track-day performance. Engineered for Performance on the Track FITMENT (REAR): McLaren 650S McLaren 570S McLaren 720S McLaren 600LT is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country.  We ship most Girodisc systems the same or next business day to ensure we meet your delivery deadline. The Girodisc system for the McLaren 600LT, 720S, 650S or 570S is a direct replacement for the OEM carbon ceramic rotors. No modifications are necessary, the Girodisc rotors will bolt directly to your McLaren and work with the original calipers without issue.  We recommend Pagid 4346 racing brake pads for this Girodisc system, in either RS29 (endurance) or RS14 (sprint) compound. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum.  The disc is made from cast iron to the same specification and material as used by professional racing organizations. It is a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.Once the Girodisc system is in place, simply replace the cast iron rotor when needed. When used with Pagid pads and high-temp racing brake fluid, you have a truly amazing, race-proven solution to the fragile, ultra-expensive carbon-ceramic rotors on your McLaren. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

Girodisc D2-146 Rear Replacement Rotor Rings Replacement rotor rings for the Girodisc A2-146 two-piece floating rotors for the Porsche 991 GT3 and GT3 RS equipped from the factory with steel rotors. Includes all hardware necessary for safely replacing worn rotor rings. These are not replacements for the factory rotors -- they are replacement rotor rings for the Girodisc A2-146. Sold/priced per pair. FEATURES Built for racing reliability and consistent performance Compatible with demanding track environments Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

D1-159 GiroDisc Replacement Rotors REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT. is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair. Features: Built for racing reliability and consistent performance Compatible with demanding track environments Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

D1-023 GiroDisc Replacement Rotors REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT. is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

A1-123 Girodisc 2pc Front Brake Rotors for Mercedes SLS AMG FITMENT: Mercedes SLS AMG is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (available from ), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

A1-023 Girodisc 2pc Front Brake Rotors McLaren MP4-12C FITS: McLaren MP4-12C with OEM steel rotors This Girodisc system is a direct replacement for the original-equipment steel rotors on the McLaren MP4-12C. Girodisc's 380mm rotors are larger than the 370mm OEM rotors and come with machined aluminum caliper spacers. is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline. This Girodisc system upgrades the OEM brakes to a two-piece steel disc and aluminum hat. This two-piece "floating rotor" design will bolt directly to the MP4-12C front and work flawlessly with the OEM calipers using the supplied spacers. Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Much lighter than the OEM rotors, Girodisc rotors reduce rotational and unsprung mass giving you stronger braking and faster suspension response. Combined with Pagid or PFC performance brake pads and RF-1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving. The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc. The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors. This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs. Sold/priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.