all

Griot's Garage Track Spray 22oz Ground Shipping Only Safely remove the scuff marks from tire rubber after your last lap record. Griot's Garage track spray is formulated to remove rubber granules from your car's body without causing any damage. Spray it on, let the spray dwell for a few seconds, and wipe it off to remove rubber marks and keep your car looking factory fresh. Griot's Garage Track Spray Details Manufacturer: Griot's Garage Manufacturer part number: 10979 Removes marks from rubber accumulated at driving events Spray on - wipe off Size: 22oz spray Track Spray excels at eliminating embedded rubber debris and is safe on all exterior surfaces so you can keep your tracked daily driver, vintage racer, or full-on race car looking podium-ready all the time. It is thick so it will cling to your ride's rocker panels. Track Spray contains a specially formulated blend of proprietary cleaning ingredients designed to remove rubber particles and contaminants from exterior sheet metal and trim surfaces. Just because a car pounds the pavement on the race track doesn't mean it can't look its best on the street. Spot test on vinyl graphics or clear bras.

Bell Forced Air Adaptor QL Nozzle 90° Bell's forced air helmets feature the new Quick Lock forced air nozzle that locks the forced air connector in place and allows for easy release when it's time to leave the vehicle. BELL QUICK LOCK 90° NOZZLE DETAILS Manufacturer: Bell Racing Helmets Manufacturer Global part number: 2070067 Manufacturer old part number 2029001 Angle: 90º Material: soft neoprene The smaller nozzle design helps accelerate airflow into the helmet with more force. The Quick Lock nozzle can be used with traditional 1.5-inch diameter forced air hoses by using the air adaptor kits that connect the hose with the Bell Quick Lock nozzle. This Bell part also connects to the Stilo New Style Top Air Adapter perfectly.

MyLaps TR2 Transponder The new standard in sports timing! The TR2 Transponder is the newest and most innovated transponder for motorsports. Reliable hardware, easy subscription management via Bluetooth and the Speedhive App and flexible subscription options to fit your needs. MAKE RACING EASIER The TR2 Transponder is a product, arising from listening carefully to you, our users. The TR2 Transponders is the world-leading standard in accuracy, just like our other Transponders, but now made much easier in many ways. The TR2 Transponder is the new standard. MYLAPS IS EASY TO MANAGE Always be prepared before racing! The new TR2 Transponder gives you all the information you need to start your race fully prepared. Due to a Bluetooth connection with the Speedhive app, it very easy to register and activate your transponder. In the Speedhive app, you re easily reminded of the duration of your ongoing license and battery status. Manage the needs of your transponder everywhere with your smartphone. FREE SPEEDHIVE APP The more you know, the faster you go. With the TR2 Transponder, all your race data will be available your personal MYLAPS Speedhive account. The free Speedhive app gives you quick access to the official results of motorized sport events. FEATURES Easy connection of your transponder with your Speedhive App via Bluetooth Easy buying and syncing your subscription with your Speedhive App Up to date status of battery level and subscription status View live race data Get quick and easy mobile access to your personal event results Compare your lap times with other racers in one graph Gain followers with your personal profile Analyze where you won and lost compared to your opponents Follow races and racers all over the world

Longacre Long Mirror Brackets (Set Of Two) Set of two billet aluminum mounting brackets for Longacre wide-angle racing mirrors. Installation requires no welding, these clamp firmly to any 1.75" OD tubing. Longacre Long Mirror Brackets Details: Manufacturer: Longacre Manufacturer part no.: 52-22540 Material: CNC-machined billet aluminum Finish: black anodized Length adjustment: 2.0" to 5.5" No welding - bolts to 1.75" OD roll bar tubing Set of two brackets

Alpinestars Bionic Rib Protector Alpinestars Bionic Rib Protector is optimized for track-day performance with reliable cooling, lightweight construction, and race-ready durability. A high-performance, lightweight, ergonomically constructed guard for the ribs and kidneys, the Bionic Rib Support incorporates intelligent adjustment features to offer kart drivers a supremely comfortable, customized and supporting fit. ALPINESTARS BIONIC RIB PROTECTOR CONSTRUCTION Technical, multi-layered main construction for optimized performance fit, protection and comfort: Advanced, soft poly-lycra inner lining means protection can be worn under or over garment. Dual composition padding incorporating 3mm high density poly-foam layer laminated with 4mm absorption EVA. Incorporates specially selected materials and components to offer crucial weight-saving performance. External 500 denier Cordura® outer for high resistance to abrasion. ALPINESTARS BIONIC RIB PROTECTOR FEATURES Dual-density, strategically positioned, ergonomically shaped protectors incorporate fiberglass core and robust PE hardshell outer for excellent impact and shock dispersion. Central adjustable back panel with Velcro attachments offers complete range of fit allowing protection to be worn under or over garment. Fully adjustable front strap with a D-ring closure features elasticated section for comfort. Adjustable shoulder straps constructed from highly breathable 3D mesh with elasticated gusset for snug fit. Perforated rear for comfort and ventilation. ALPINESTARS BIONIC RIB PROTECTION Dual-density, strategically positioned, ergonomically shaped protectors Incorporated fiberglass core Robust PE hardshell outer for excellent impact and shock dispersion. ALPINESTARS BIONIC RIB PROTECTOR SIZE CHART

Performance Friction PFC Brake Pads 0278.XX.17.44 The PFC 0278 brake pad fits the BMW Spec E30 front axle and is available in both the 08 and 11 compounds. The 08 (endurance) compound is most popular in endurance applications such as ChampCar in an 8 hour race. The 11 (sprint) compund has dominated the NASA Spec E30 podiums since it's inception. Performance Friction PFC 0278.XX.17.44 E30 Front Details Manufacturer: Performance Friction (PFC) Manufacturer part number 08 Compound: 0278.08.17.44 Manufacturer part number 11 compound: 0278.11.17.44 Fits BMW E-30 Front: Yes Fits BMW E-30 M3 Front: No Thickness of backing plate and pad material: 17mm 0278.08.17.44 (08 Compound) One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range 0278.11.17.44 (11 Compound) A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 0278 Brake Pad Fitment Front brake padBMW E30 3 Series (316i, 318is, 320i, 323i, 324i, 324d, 325e, 325i) 1985-92

OMP ONE EVO Nomex Top FIA 8856-2018 HOMOLOGATED OMP ONE EVO premier long sleeved shirt with high neck for maximum protection made with a comfortable fire retardant seamless fabric. The high breathability fabric inserts "3D cube" on main perspiration areas ensures the best comfort and a perfect fitting (3D Dry System Technology). The special 3D inserts on the sides, back of the shoulders, small of the back, and inside the arms allow perspiration to evaporate without sacrificing flame protection. OMP ONE EVO shirts have an athletic cut with increased elasticity to fit smoothly under the driver's fire suit. As such, they are designed to fit a little bit tight. The shirt also features a soft fire-retardant inner fabric, providing a snug and comfortable fit without compromising protection. With certifications to the latest FIA 8856-2018 homologation standards, this is Nomex racing apparel built to the highest safety standards. OMP ONE EVO Nomex Underlayer Shirt Details FIA 8856-2018 homologation Available in black or white XS/S (EU42-46) Medium (EU48-50) Large (EU52-54) XL/2XL (EU56-58) 3XL (EU60-64)

  AiM Sports 719 Extension Cables AiM Sports 719 Extension Cables connect your AiM pressure or temperature sensors to your primary or auxiliary harness. The AiM 719 extension cable has one male (dash side) and a female (sensor side) 719 connector in your choice of lengths. The AiM 719 connection is identified as a black plastic 4 pin connector. Use these extension cable to connect additional sensors to the following AiM Sports Dashes: MXG MXS MXL2 MXL Strada/Pista/Pro 05   Part numbers:   V02PCB05B cable length: 0.5m - 1.6ft V02PCB10B cable length: 1m - 3.3ft V02PCB15B cable length: 1.5m - 4.9ft V02PCB20B cable length: 2m - 6.6ft V02PCB25B cable length: 2.5m - 8.2ft V02PCB30B cable length: 3m - 9.8ft V02PCB40B cable length: 4m - 13.12ft                

Laser Lite Multi-Color Foam Earplugs The bright idea in hearing protection, Laser Lite’s low-pressure polyurethane foam expands gently inside the ear canal for comfortable long-term wear, while its contoured T-shape delivers easy handling. Its high-visibility magenta and yellow colors make compliance checks quick and easy. Laser Lite Multi-Color Foam Earplugs Details Manufacturer: Laser Lite Manufacturer part number: LL1 Color: Yellow/Magenta Vibrant colors make protection visible Self-adjusting polyurethane foam expands to fit virtually every wearer Contoured T-shape for easy insertion and wear Smooth, soil-resistant closed cell-foam skin prevents dirt build-up Formable foam expands to fit most wearers  

Longacre Short Mirror Brackets (Set Of Two) Set of two billet aluminum mounting brackets for Longacre wide-angle racing mirrors. Installation requires no welding, these clamp firmly to any 1.75" OD tubing. Longacre Short Mirror Brackets Details: Manufacturer: Longacre Manufacturer part no.: 52-22538 Material: CNC-machined billet aluminum Finish: black anodized Length adjustment: 0.5" to 2.5" No welding - bolts to 1.75" OD roll bar tubing Set of two brackets

Sabelt UI-600 Nomex Fireproof Shirt FIA 8856-2018 Certified The new UI-600 tech layers from Sabelt offer stretch-fit nearly seamless construction for the ultimate in breathability and comfort while racing. The composition of this new underwear line makes the clothing light, resistant and extremely comfortable. The use of Lenzing FR fiber, which is made of a natural raw material, and keeps the body dry and cool, together with the modacrylic and elasthane, which make the garments totally stretch, make this line the most convenient and the most Innovative across the range. The two way stretch warp knit seamless fabric has a high wear resistance and is very light.

Fly Our Flag at Your Next Event! These Next Level Apparel 60/40% cotton/poly t-shirts are lightweight, soft, comfortable and of course stylish. Show your support for Discovery Parts at your next race weekend, track day, autocross or cars and coffee! We love to see these shirts popping up on Facebook, Instagram and wherever else you post your favorite track pics, so be sure to tag us! We especially love to see customers walk into our store at Atlanta Motorsports Park donning our logo, so stop by and say hello!

OMP 36-Hole Racing Seat Brackets New OMP racing seat brackets feature a 36-hole design to accommodate an incredibly wide range of seat mounting configurations. Made from steel or OMP's high-strength 6mm aluminum construction, they comply with FIA Appendix J article 253, approved for competition use. They are designed to work seamlessly with OMP Racing Seats, and will fit many other seats with 11.4 in. (289 mm) side-mounting hole spacing (including many Sparco seats). The multi-hole design allows for up to 36 different seat mounting positions. Aluminum mounts are black anodized for excellent durability.

Schroth Profi II ASM 4 Point Harness (Anti-Sub) The Schroth Profi II ASM 4 Point Harness (Anti-Sub) integrates Schroth's unique ASM ("Anti-Submarining") technology in a four-point system. The ideal harness for stock seats, or seats not designed for a pass-through for a sub strap, that are used in Driver Education programs. Schroth ASM is an extra fold of material sewn into the inboard shoulder belt, elongating at a separate rate compared to the outboard belt. This allows two movements: the upper torso can twist slightly, and on the rebound phase, the torso is planted firmly back in the seat instead of sliding under the lap belt. The Schroth Profi II ASM 4 Point Harness is good for use with a HANS device or other Head and Neck Restraint (HNR). The ASM shoulder strap on the ASM is 3 width, which will work with any HNR. A dual or single strap can be added to convert this belt into a 5- or 6- point system. The shoulders are ready to wrap around a roll bar, and snap-in or bolt-in attachments can be purchased. The Schroth Profi II ASM 4 Point Harness also features a Flex Belt. Instead of being sewn into the harness, the cam latches and end fittings are wrapped, making configuration changes from a Pull-Up to a Pull-Down configuration quick and easy. In addition to helping you customize the use of your device for your particular situation, you can add bolt-in brackets to be wrapped in the lap belts. Snap-in brackets are standard on the lap belts. Choose from Black, Blue, or Red! Be sure to specify Driver or Passenger side as the construction is slightly different for each.

Racing Radios 4/C IMSA Style Helmet Kit (Coil) – EZ Install The Racing Radios 4-Conductor IMSA Coil Cord Helmet Kit is the ultimate plug-and-play solution for in-helmet communications in sports car racing. Designed for IMSA, SCCA, and Grand-Am drivers, this kit offers durability, flexibility, and easy installation—no drilling or complex wiring required. Pro-Grade Helmet Kit With Quick, Clean Installation The coiled IMSA cord offers freedom of movement while maintaining secure connections. With a built-in earpiece jack and noise-canceling mic, this is the go-to kit for racers who demand clear communication and minimal hassle. Key Features Manufacturer: Racing Radios Part Number: HKP-4C-EZ Connector: IMSA 4-Conductor Coil Cord Microphone: Mini noise-canceling mic Includes installation kit and instructions Velcro tab for earpiece positioning Smart Design. Race-Ready Setup. The EZ Install kit includes pre-connected cords for the earpiece and IMSA plug—just connect the microphone, secure it with the included Velcro tab, and you're ready to race. No shell modification required. This is the gold standard for in-helmet communication in endurance and road racing. Get race-day ready with the trusted helmet communication solution from Racing Radios. Order the IMSA 4-Conductor Helmet Kit with Coil Cord today. This is a custom-made item. Please allow extra time for delivery.

Racing Radios Four Conductor (IMSA) In-Car Racing Radio Car Harness (Rear) Racing Radios 4 Conductor (IMSA) wiring in-car radio harness for Motorola mobile radios. Plugs directly into the REAR 16 pin accessory jack on Motorola mobile radios. Compatible with CM200, CM300, PM400, M1225 and CDM mobile radios. Racing Radios (IMSA) Car Harness Base Unit (Rear) Details: Manufacturer: Racing Radios Manufacturer part number: RCH-100010B-R Helmet connection: IMSA 4 Conductor PTT connection: 3 Pin chrome barrel connector Radio connection: Motorolla 16 pin rear push-in Racing Radios (IMSA) Car Harness Base Unit (Rear) Wiring Lengths: Black junction box length: 3" Black junction box to 16 Pin connector: 24" Black Juction Box to IMSA Helmet connector: 60" Black junction box to PTT: Connector: 84" If you have a Motorola Base Unit Radio and connect through the rear 16 pin connector panel, this is your car harness.