Auto Racing Gloves

Sparco Land Classic Nomex Gloves The Land Classic is Sparco's Land glove in vintage color schemes. The Land Classics is an entry-level competition glove that provides excellent protection and feedback. The ergonomic palm design with reinforced stitching conforms to the hand’s position. The palm has been redesigned with new suede anti-slip fingertip and palm grips to provide greater performance. The elastic wrist and wide range of sizes helps ensure proper fitment. The Land Classic is SFI and FIA approved. SPARCO LAND CLASSIC NOMEX GLOVE TECHNOLOGY Ergonomic palm design with reinforced stitching conforms to the hand’s position New suede anti-slip fingertip and palm grips provide greater performance Available in Cream or Navy SFI and FIA 8856-2018 approved SPARCO LAND CLASSIC NOMEX GLOVE SIZE CHART

Alpinestars Tech-1 Start v3 Nomex Racing Gloves The Alpinestars Tech-1 Start v3 Nomex Gloves are engineered to provide lightweight protection, precise steering-wheel control, and lasting comfort for competitive auto racing. Designed with a single upper panel and an innovative finger construction, these racing gloves reduce excess material throughout the fingers while lowering the overall weight of the glove. The streamlined design creates a close, anatomically optimized fit that is especially beneficial inside confined racing cockpits. Drivers receive improved freedom of movement, reduced bulk, and a more direct connection with the steering wheel and vehicle controls. Lightweight Single-Panel Construction The single-panel upper construction minimizes unnecessary seams and material across the glove. This helps improve flexibility and reduces potential pressure points during long races, qualifying sessions, and track days. By reducing excess fabric in the fingers, the Tech-1 Start v3 offers a more precise fit and improved dexterity without sacrificing the protection required for motorsport competition. Innovative Finger Design Box-cut fingertip construction provides a comfortable and natural finger position while helping reduce material buildup near the fingertips. The middle and ring fingers use a seamless, no-fourchette design that eliminates the traditional fabric panels between the fingers. This construction creates a less restrictive feel and allows the glove to conform more closely to the driver’s hand. The reduced bulk is particularly useful when operating steering-wheel buttons, switches, paddles, and other controls inside compact racing cockpits. Silicone Palm Grip Ergonomically positioned silicone-printed zones across the palm provide enhanced grip on the steering wheel. The strategically placed silicone helps reduce unwanted hand movement and allows the driver to maintain control without applying excessive gripping pressure. The improved grip can help reduce hand fatigue while providing a more consistent steering feel during demanding driving conditions. Extended Elasticated Cuff The close-fitting, straight cuff extends beyond the wrist to provide dependable coverage between the gloves and racing suit. An elasticated wrist allows for easy entry while helping keep the glove securely positioned once fitted. The streamlined cuff design also reduces unnecessary bulk around the wrist and fits comfortably beneath or over the cuff of a compatible racing suit. FIA and SFI-Certified Racing Protection The Alpinestars Tech-1 Start v3 Gloves are certified to FIA 8856-2018 and SFI 3.3/5 standards for use in sanctioned motorsport competition. These certifications make the gloves suitable for many professional, club-level, endurance, road-racing, and grassroots motorsport applications. Always confirm the required safety standard with your racing organization or sanctioning body before competition. Alpinestars Tech-1 Start v3 Nomex Glove Features Lightweight Nomex auto-racing glove construction Single upper panel reduces seams and overall weight Innovative finger construction reduces excess material Box-cut fingertip design for improved comfort and fit Seamless no-fourchette construction on the middle and ring fingers Anatomically optimized for confined racing cockpits Ergonomically positioned silicone palm grip zones Enhanced steering-wheel grip and control Close-fitting straight extended cuff Elasticated wrist for easy entry and a secure fit Designed to improve dexterity and reduce hand fatigue FIA 8856-2018 certified SFI 3.3/5 certified Ideal for Multiple Racing Applications The Tech-1 Start v3 is an excellent choice for drivers who need certified protection without the weight and bulk of a heavier racing glove. Its close-fitting design and silicone palm grip make it suitable for road racing, autocross, time trials, endurance racing, track days, and other forms of competitive motorsport. Why Choose the Alpinestars Tech-1 Start v3 Gloves? These gloves combine certified fire-resistant protection with a lightweight, driver-focused construction. The reduced-material finger design improves comfort and dexterity, while the silicone palm zones provide the grip needed for accurate steering input. For drivers seeking an affordable Alpinestars racing glove with FIA and SFI certification, the Tech-1 Start v3 delivers a strong balance of protection, comfort, and control. Alpinestars Tech-1 Start v3 Nomex Glove Size Chart Frequently Asked Questions Are the Alpinestars Tech-1 Start v3 Gloves fire resistant?Yes. These gloves are designed for auto racing and use fire-resistant materials appropriate for certified motorsport competition. What certifications do the Tech-1 Start v3 Gloves have?They are certified to FIA 8856-2018 and SFI 3.3/5 standards. What is a no-fourchette finger design?A no-fourchette design removes the traditional material panels between selected fingers. This reduces bulk and creates a closer, more anatomically optimized fit. Do these gloves have silicone on the palm?Yes. Ergonomically positioned silicone-printed zones provide enhanced grip on the steering wheel. Are these gloves suitable for kart racing?They are designed as fire-resistant auto-racing gloves. Karting organizations may use different certification requirements, so drivers should confirm the rules for their specific series. How should Alpinestars racing gloves fit?They should fit closely without restricting movement or causing uncomfortable pressure at the fingertips. A secure fit helps preserve steering feel and control.

OMP First-S Race Gloves The OMP First-S Race Gloves combine dependable fire-resistant protection, secure steering-wheel grip, and everyday comfort in an affordable competition glove. Updated to meet the FIA 8856-2018 homologation standard, the First-S is designed for drivers who want modern safety and straightforward performance without stepping into a premium price category. Silicone printing across the palms and fingers improves traction and control, while redesigned finger inserts provide a closer, more comfortable fit. A straight-cut cuff with an elasticated wrist allows quick entry and keeps the glove securely positioned throughout each session. Affordable FIA-Approved Performance The OMP First-S is built for drivers who need certified protection and reliable control at a practical price. Its lightweight construction focuses on the features that matter most behind the wheel: grip, comfort, flexibility, and current FIA approval. This makes the First-S a strong choice for drivers replacing older equipment or purchasing their first pair of FIA-homologated racing gloves. Silicone Palm and Finger Grip Silicone printing is applied across the palm and fingers to create a secure connection with the steering wheel. The low-profile grip pattern improves traction without adding the bulk of a separate reinforcement layer. Extending the silicone onto the fingers also improves control of paddle shifters, switches, buttons, and other cockpit controls. Improved Finger Inserts Redesigned finger inserts help the glove follow the natural shape of the hand more closely. The improved construction reduces excess material and supports better comfort around the fingers during repeated steering inputs. A more precise fit can also improve dexterity and reduce hand fatigue during longer sessions. Comfort for Extended Track Use The OMP First-S is designed to remain comfortable through repeated laps and long track days. Its lightweight materials allow natural hand movement while minimizing unnecessary pressure and bulk. The close-fitting construction helps the driver maintain a relaxed grip rather than squeezing the wheel excessively to stay in control. Straight-Cut Elasticated Wrist A straight-cut cuff gives the First-S a clean, traditional appearance and allows easy overlap with a compatible racing suit sleeve. The elasticated wrist keeps the glove securely positioned without requiring a bulky hook-and-loop strap. The flexible opening also makes the gloves quick and easy to put on or remove between sessions. Modern OMP Styling The OMP First-S features updated graphics and is available in multiple color options. Drivers can coordinate the gloves with OMP suits, shoes, helmets, and other racing equipment for a consistent competition look. FIA 8856-2018 Homologated Protection The OMP First-S Race Gloves are homologated to FIA 8856-2018, the current standard for fire-resistant driver clothing used in many forms of automobile competition. Drivers should always confirm the exact equipment requirements of their sanctioning organization before entering an event. OMP First-S Nomex Glove Features Lightweight fire-resistant racing glove construction Silicone printing across the palm and fingers Low-profile grip preserves steering sensitivity Improved finger inserts enhance fit and comfort Straight-cut cuff provides a clean, streamlined fit Elasticated wrist allows easy entry and secure retention Available in multiple modern colorways FIA 8856-2018 homologated OMP First-S Nomex Glove Specifications Manufacturer: OMP Model: First-S Product Type: Fire-Resistant Auto Racing Gloves Palm: Silicone-printed grip Fingers: Silicone grip print with improved inserts Wrist: Elasticated closure Cuff: Straight cut Available Sizes: XS through XXL Homologation: FIA 8856-2018 Why Choose the OMP First-S? The First-S offers a practical balance of certified protection, secure grip, and comfort. Its silicone palm and finger print improve control, while the updated finger construction and elasticated wrist keep the fit simple and dependable. For drivers seeking a current FIA-approved glove with strong value and recognizable OMP styling, the First-S is an excellent competition-ready option. OMP First-S Nomex Glove Size Chart Frequently Asked Questions Are the OMP First-S Race Gloves FIA approved?Yes. The OMP First-S is homologated to the FIA 8856-2018 standard. Can the OMP First-S Gloves be used for competitive racing?Yes, when FIA 8856-2018-approved gloves meet the requirements of the racing organization or event. Do the gloves have silicone grip on the fingers?Yes. Silicone printing covers both the palm and fingers to improve steering-wheel and cockpit control. What is the benefit of the improved finger inserts?They provide a closer, more comfortable fit while reducing excess material and helping maintain dexterity. Do the OMP First-S Gloves have a wrist strap?No. An elasticated wrist keeps the gloves securely positioned without a separate adjustment strap. What sizes are available?The OMP First-S Race Gloves are available in sizes XS through XXL. Are these gloves suitable for long races or track sessions?Yes. Their lightweight construction and improved finger fit are designed to reduce fatigue during extended use. How should I clean the OMP First-S Gloves?Hand wash them gently with mild soap and cool water, then allow them to air dry. Avoid machine washing, bleach, strong chemicals, and high heat. How should the OMP First-S Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips.

Sparco Meca 3 Pit Gloves The Sparco Meca 3 Pit Gloves are lightweight mechanic gloves designed for precise work in the garage, paddock, workshop, and pit area. Their flexible construction gives technicians the hand movement and tactile feedback needed when handling tools, fasteners, vehicle components, and equipment. An elasticized, scuff-resistant backhand moves naturally with the hand, while the synthetic suede palm provides durability and dependable grip. Reinforcement between the thumb and index finger strengthens a high-wear area without adding unnecessary bulk. Built for Hands-On Mechanical Work The Meca 3 is designed for mechanics and crew members who need protection without sacrificing dexterity. Its close-fitting shape helps reduce excess material around the fingers, making it easier to work with sockets, wrenches, electrical connectors, body fasteners, and small components. The lightweight design also makes the gloves practical for repeated use during setup changes, inspections, repairs, loading, and general workshop tasks. Flexible Scuff-Resistant Backhand The back of the glove uses an elasticized printed fabric that stretches with the hand during movement. Its scuff-resistant construction helps withstand regular contact with tools, equipment, bodywork, and surrounding workshop surfaces. This flexible upper construction allows the fingers and knuckles to move naturally while helping the glove maintain a secure, controlled fit. Durable Synthetic Suede Palm A synthetic suede palm provides grip, durability, and tactile sensitivity for mechanical work. The material allows the wearer to maintain control of tools and components without the stiffness associated with heavier work gloves. The palm construction is intended to balance protection with the feedback needed for detailed tasks and repeated handling. Reinforced Thumb and Index-Finger Area Additional reinforcement is positioned between the thumb and index finger, an area that experiences frequent friction when gripping tools, lifting components, and turning fasteners. This targeted reinforcement improves durability while preserving flexibility across the rest of the hand. Breathable Finger Panels Breathable panels positioned between the fingers improve ventilation and help manage heat during extended work sessions. The added airflow supports comfort when working in warm garages, enclosed workshops, or busy pit environments. The flexible finger construction also allows the hand to open, close, and grip naturally without excessive resistance. Secure Adjustable Wrist Closure A hook-and-loop wrist strap allows the Meca 3 to be adjusted for a close and secure fit. The closure helps prevent the glove from shifting while working and makes it quick to put on or remove between tasks. Important Safety Information The Sparco Meca 3 Pit Gloves are not fire resistant or heat resistant. They are intended for mechanic, workshop, paddock, and pit-support use. Do not use these gloves as a substitute for FIA-, SFI-, or Nomex-certified racing gloves in competition environments that require homologated fire-resistant driver equipment. Sparco Meca 3 Pit Glove Features Lightweight pit-crew and mechanic glove construction Elasticized backhand supports natural hand movement Printed scuff-resistant fabric improves durability Synthetic suede palm provides grip and tactile feedback Reinforcement between the thumb and index finger Breathable panels between the fingers improve airflow Close-fitting design supports precision work Adjustable hook-and-loop wrist closure Suitable for workshop, paddock, garage, and pit-area tasks Sparco Meca 3 Pit Glove Specifications Manufacturer: Sparco Model: Meca 3 Product Type: Pit Crew and Mechanic Gloves Backhand: Elasticized Scuff-Resistant Fabric Palm: Synthetic Suede Reinforcement: Thumb and Index-Finger Grip Area Ventilation: Breathable Finger Panels Closure: Adjustable Hook-and-Loop Wrist Strap Fire Resistance: None Heat Resistance: None Why Choose the Sparco Meca 3? The Sparco Meca 3 delivers the dexterity, grip, and durability needed for everyday mechanical work. Its synthetic suede palm and reinforced grip area help manage wear, while the flexible backhand and breathable finger panels improve comfort during extended use. For mechanics and crew members who need a lightweight glove for precise vehicle work, the Meca 3 provides a practical combination of protection, control, and recognizable Sparco styling. Sparco Meca 3 Pit Glove Size Chart Frequently Asked Questions What are the Sparco Meca 3 Gloves designed for?They are designed for mechanics, technicians, pit crews, and workshop users who need lightweight hand protection and good dexterity. Are the Sparco Meca 3 Gloves fire resistant?No. These gloves are not fire resistant and should not be used where certified fire-resistant racing gloves are required. Are the Meca 3 Gloves heat resistant?No. They are not designed to protect against hot exhaust components, engines, brakes, flames, or other high-temperature surfaces. What material is used on the palm?The palm is made from durable synthetic suede that provides grip, scuff resistance, and tactile feedback. Do the gloves have reinforced wear areas?Yes. Reinforcement is positioned between the thumb and index finger to improve durability in a frequently used grip area. Are the Sparco Meca 3 Gloves breathable?Yes. Panels between the fingers improve airflow and help keep the hands more comfortable during extended work sessions. How are the gloves secured?An adjustable hook-and-loop wrist strap provides a close and secure fit. Can these gloves be used as racing driver gloves?No. They are mechanic gloves and should not replace FIA-, SFI-, or Nomex-certified driver gloves when fire-resistant equipment is required. How should the Sparco Meca 3 Gloves fit?They should fit closely around the palm and fingers without restricting movement. A snug fit improves tool control and reduces excess material around the fingertips. How should the gloves be cleaned?Gently clean them with mild soap and cool water, then allow them to air dry. Avoid bleach, harsh chemicals, machine drying, and direct high heat.

Alpinestars Engine Pit Gloves The Alpinestars Engine Pit Gloves combine lightweight comfort, practical hand protection, and the dexterity mechanics need when working in the garage, paddock, or pit lane. Their hybrid multi-material construction uses breathable stretch mesh, flexible fabric panels, and a durable synthetic suede palm to balance cooling performance with dependable grip and wear resistance. A strategically positioned TPR knuckle insert adds impact protection without making the glove feel excessively bulky. Conductive printing on the palm and fingers also allows mechanics and crew members to operate compatible tablets, phones, and handheld diagnostic devices without removing their gloves. Designed for Fast, Precise Pit Work Working around a race car requires a glove that protects the hands without interfering with tools, fasteners, switches, or small components. The Alpinestars Engine Pit Glove is shaped to support natural hand movement while maintaining the tactile feedback needed for detailed mechanical work. Its short-cuff design keeps the wrist area unrestricted, while the hook-and-loop closure allows the fit to be adjusted quickly and securely between jobs. Advanced TPR Knuckle Protection A flexible thermoplastic rubber insert is positioned across the knuckle area to help protect against bumps and impacts commonly encountered while working around engines, suspension components, bodywork, and workshop equipment. The low-profile design follows the shape of the hand, delivering added protection while preserving the flexibility required to grip tools and reach into confined areas. Breathable Stretch Construction Stretch mesh and flexible fabric panels across the top of the hand promote airflow and help reduce heat buildup during long work sessions. The lightweight materials conform to the hand and support repeated movement without creating unnecessary resistance. An ergonomic stretch insert between the thumb and palm improves mobility through one of the hand’s highest-movement areas, making it easier to grasp tools, lift parts, and operate equipment. Durable Synthetic Suede Palm The synthetic suede palm provides a combination of grip, durability, and tactile sensitivity. It helps the wearer maintain control of tools and components while remaining flexible enough for precision work. Strategic palm padding improves comfort when handling equipment or applying pressure, while reinforced synthetic suede around the thumb increases durability in an area exposed to frequent friction and wear. Touchscreen-Compatible Controls Conductive printing allows compatible touchscreen devices to be operated while the gloves remain on. This is useful for mechanics referencing setup data, entering service notes, checking timing information, or using diagnostic applications in the paddock. The touchscreen-compatible design reduces interruptions and helps keep the hands protected when moving between physical work and digital equipment. Strategic Finger Padding Two-millimeter foam padding is positioned along the fingers to improve comfort and fit without significantly reducing dexterity. The padding provides additional cushioning when handling tools, equipment, and vehicle components. The shaped finger construction supports a close, controlled fit, helping reduce excess material that could interfere with detailed tasks. Secure Short-Cuff Closure A hook-and-loop closure on the back of the hand allows the glove to be tightened for a precise and secure fit. The short cuff provides unrestricted wrist movement and makes the gloves quick to put on or remove during busy pit and workshop operations. Fade-Resistant Alpinestars Styling Sublimated graphics on the back of the hand create a distinctive Alpinestars appearance while resisting fading from regular use. The technical styling complements professional race-team apparel and workshop uniforms without compromising the glove’s functional design. Alpinestars Engine Pit Glove Features Hybrid multi-material mechanic and pit-crew glove Advanced TPR knuckle insert for low-profile impact protection Lightweight stretch mesh promotes airflow and cooling Flexible stretch fabric supports natural hand movement Ergonomic insert between the thumb and palm improves mobility Synthetic suede palm provides grip, durability, and tactility Padded palm improves comfort during demanding work Synthetic suede thumb reinforcement increases wear resistance Conductive print supports compatible touchscreen devices Strategic 2mm foam finger padding improves fit and comfort Hook-and-loop cuff closure provides a precise fit Short-cuff design allows unrestricted wrist movement Sublimated backhand graphics resist fading Alpinestars Engine Pit Glove Specifications Manufacturer: Alpinestars Model: Engine Product Type: Pit Crew and Mechanic Gloves Backhand: Stretch Mesh and Stretch Fabric Palm: Padded Synthetic Suede Knuckle Protection: Flexible TPR Insert Finger Padding: Strategic 2mm Foam Closure: Hook-and-Loop Wrist Adjustment Cuff: Short-Cuff Design Device Compatibility: Conductive Touchscreen Print Why Choose the Alpinestars Engine Pit Gloves? The Alpinestars Engine Pit Gloves are made for mechanics and crew members who need protection without losing the hand movement required for detailed work. Breathable materials help manage heat, the synthetic suede palm improves grip and durability, and the flexible TPR knuckle insert adds protection in a practical, low-profile design. Touchscreen compatibility and a secure short-cuff closure make the Engine Glove especially useful in modern racing environments where mechanics regularly move between tools, vehicle components, tablets, and diagnostic equipment. Alpinestars Engine Pit Glove Size Chart Frequently Asked Questions What are the Alpinestars Engine Pit Gloves designed for?They are designed for mechanics, technicians, pit crews, and other users who need lightweight hand protection, grip, and dexterity while working around vehicles and equipment. Do the gloves provide knuckle protection?Yes. A strategically positioned TPR insert helps protect the knuckles from minor impacts without significantly limiting hand movement. Are the Alpinestars Engine Gloves touchscreen compatible?Yes. Conductive printing on the palm and fingers allows operation of many compatible phones, tablets, and handheld devices. Are the gloves breathable?Yes. Stretch mesh and lightweight fabric panels on the back of the hand promote airflow and help reduce heat buildup. What material is used on the palm?The palm is made from padded synthetic suede for a combination of grip, durability, comfort, and tactile feedback. Do the gloves have finger padding?Yes. Strategic 2mm foam padding improves comfort and helps provide a secure fit around the fingers. How are the gloves secured at the wrist?A hook-and-loop closure on the back of the hand allows the wearer to adjust the short cuff for a precise and secure fit. Are these fire-resistant racing gloves?No fire-resistant certification is specified for the Alpinestars Engine Pit Gloves. They are intended primarily for mechanical, pit-crew, and workshop use rather than as homologated driver gloves. How should the Alpinestars Engine Pit Gloves fit?They should fit closely around the palm and fingers without restricting movement. A snug fit helps maintain control of tools and small components while minimizing excess material. How should the gloves be cleaned?Clean them gently with mild soap and cool water, then allow them to air dry. Avoid bleach, harsh chemicals, machine drying, and direct high heat.

Bell ADV-TX Auto Race Gloves External seam construction reduces pressure points and bulk Pre-curved fingers minimize hand fatigue and improve dexterity Fire-resistant silicone grip zones for superior traction Suede leatherpalm inserts enhance durability and wheel control Outstanding steering wheel feel and tactile feedback Double elastic wrist closure for a secure fit Advanced lightweight performance fabrics Professional motorsports ergonomic fit SFI 3.3/5 homologation approved Maximum Grip and Steering Precision The Bell ADV-TX Auto Race Gloves are designed to maximize driver connection with the steering wheel. Fire-resistant silicone grip zones and suede leather palm inserts provide exceptional traction while maintaining excellent tactile sensitivity for precise steering input during aggressive driving conditions. External Seam Construction for Comfort External seam construction reduces internal pressure points that can lead to discomfort during long races. Combined with pre-curved finger shaping, the ADV-TX gloves help reduce driver fatigue while improving natural hand movement and overall comfort behind the wheel. Bell ADV-TX Auto Race Glove Specifications Certification: SFI 3.3/5 Fire-resistant racing glove construction External seam ergonomic design Pre-curved finger construction Fire-resistant silicone grip zones Suede leather palm inserts Double elastic wrist closure Available Colors: Red/Black Black/Red Manufacturer Part Numbers Red/Black: BR20011 (Small) to BR20015 (2X-Large) Black/Red: BR20001 (Small) to BR20005 (2X-Large) Built for Serious Motorsport Competition The Bell ADV-TX Auto Race Gloves are ideal for road racing, endurance racing, drag racing, time attack, autocross, and track day drivers seeking professional-level comfort and control. Their lightweight construction and advanced grip technology help drivers stay focused during high-intensity competition. Why Buy Bell ADV-TX Auto Race Gloves from Discovery Parts? Discovery Parts supplies premium motorsports safety equipment trusted by racers across every level of competition. Our expert team provides fast shipping, knowledgeable support, and carefully selected racewear products designed for performance, protection, and durability. Bell ADV-TX Auto Race Gloves FAQs What certification do the Bell ADV-TX Auto Race Gloves carry? The Bell ADV-TX Auto Race Gloves are certified to SFI 3.3/5 standards for fire-resistant motorsports competition use. What are the benefits of external seams on racing gloves? External seams reduce pressure points inside the glove, improving comfort and minimizing irritation during long races or endurance events. Do the Bell ADV-TX gloves offer strong grip? Yes. Fire-resistant silicone grip zones and suede leather palm inserts provide excellent traction and steering wheel control. Are the Bell ADV-TX gloves comfortable for long races? Absolutely. Pre-curved fingers and lightweight performance fabrics help reduce hand fatigue while improving comfort and dexterity. What sizes are available for the Bell ADV-TX Auto Race Gloves? The Bell ADV-TX Auto Race Gloves are available from Small through 2X-Large depending on color selection. What racing applications are the Bell ADV-TX gloves designed for? These gloves are designed for road racing, endurance racing, drag racing, autocross, time attack, and track day competition. Order Your Bell ADV-TX Auto Race Gloves Today Upgrade your grip, comfort, and steering precision with the Bell ADV-TX Auto Race Gloves from Discovery Parts. Designed for serious racers who demand maximum control and professional-level protection.

OMP ONE EVO FX Gloves The OMP ONE EVO FX Gloves are professional-level racing gloves developed for drivers who demand precise steering feedback, dependable grip, and lasting comfort during demanding competition. Their advanced pre-curved shape supports a natural driving position, helping reduce material bunching and unnecessary hand fatigue during extended sessions. Lightweight honeycomb fabric promotes airflow throughout the glove, while strategically positioned silicone grip zones improve steering control without sacrificing sensitivity. External finger seams reduce pressure points, and the internally stitched thumb provides refined feel when operating steering-wheel buttons, rotary controls, and paddle shifters. Ergonomic Construction for Natural Steering Control The ONE EVO FX is shaped around the position a driver’s hands naturally assume on the steering wheel. Its pre-curved fingers and palm reduce resistance when closing the hand, allowing the driver to maintain a secure grip with less effort. This ergonomic construction minimizes excess material across the palm and fingertips, helping preserve tactile feedback while reducing fatigue during long races, endurance stints, and repeated high-load steering inputs. Directional Silicone Grip Zones Strategically arranged silicone sections provide traction where the glove makes the most contact with the steering wheel. The directional grip pattern helps resist unwanted hand movement during cornering, braking, and rapid steering corrections. Rather than covering the entire palm with a heavy reinforcement layer, the focused silicone layout maintains a direct connection with the wheel and preserves the sensitivity needed for precise vehicle control. External Finger Seams for Reduced Pressure External seams move potentially irritating stitching away from the inside of the fingers. This construction reduces pressure points and improves comfort during extended periods behind the wheel. The smoother internal finger area also helps the glove conform more closely to the hand, limiting distractions caused by bulky seams or excess material. Internally Stitched Thumb for Enhanced Feedback The thumb uses an internal seam configuration to improve sensitivity and control around modern steering-wheel equipment. This construction gives the driver a more precise feel when using push buttons, switches, rotary controls, and paddle-shift systems. Combining external finger seams with an internally stitched thumb allows OMP to optimize different areas of the glove for their specific driving functions. Breathable Honeycomb Fabric Lightweight honeycomb fabric across the outer glove encourages airflow and helps manage heat inside the cockpit. The breathable construction is especially beneficial during endurance competition, warm-weather events, and long sessions where moisture buildup can affect comfort. The flexible material follows the hand through repeated steering movements without creating unnecessary stiffness or bulk. Slanted Elastic Cuff An elasticated cuff keeps the ONE EVO FX securely positioned throughout the session. Its slanted wrist opening follows the natural angle of the forearm, making the glove easier to put on while creating a comfortable overlap with compatible racing-suit sleeves. The streamlined cuff eliminates the need for a bulky external adjustment strap and maintains a clean, competition-focused fit. FIA 8856-2018 Homologated Protection The OMP ONE EVO FX Gloves are homologated to the FIA 8856-2018 standard for fire-resistant driver clothing. This certification makes them suitable for many professional, amateur, and club-level motorsport events requiring current FIA-approved racing gloves. Drivers should confirm the specific safety-equipment requirements of their racing series or sanctioning organization before competition. OMP ONE EVO FX Glove Features FIA 8856-2018 homologated racing-glove construction Advanced pre-curved shape supports a natural driving position Directional silicone grip zones improve steering control Low-profile grip layout preserves tactile feedback External finger seams reduce internal pressure points Internal thumb seams improve sensitivity around wheel controls Breathable honeycomb fabric promotes airflow Lightweight materials help reduce hand fatigue Elastic cuff provides secure retention Slanted wrist opening allows easier entry Updated OMP competition styling Available in multiple color combinations OMP ONE EVO FX Glove Specifications Manufacturer: OMP Model: ONE EVO FX Product Type: Fire-Resistant Auto Racing Gloves Construction: Lightweight Pre-Curved Design Outer Fabric: Breathable Honeycomb Material Grip: Directional Silicone Zones Finger Seams: External Thumb Seam: Internal Cuff: Elasticated with Slanted Opening Available Sizes: XS, S, M, L, XL, and XXL Homologation: FIA 8856-2018 Available Colors White — 020 Red — 061 Black — 071 Fluorescent Yellow — 099 Navy Blue/Cyan — 244 Why Choose the OMP ONE EVO FX? The ONE EVO FX stands apart through its carefully balanced seam construction, ergonomic shaping, and directional grip design. Every major contact area is configured to improve comfort or control, from the pressure-reducing external finger seams to the sensitive internally stitched thumb. For drivers competing in sprint, endurance, touring-car, formula, or GT environments, the OMP ONE EVO FX provides a refined combination of certified protection, ventilation, steering precision, and fatigue-reducing comfort. OMP ONE EVO FX Racing Glove Size Chart Frequently Asked Questions Are the OMP ONE EVO FX Gloves FIA approved?Yes. The gloves are homologated to the FIA 8856-2018 standard for fire-resistant driver apparel. What makes the ONE EVO FX different from a basic racing glove?It uses pre-curved ergonomics, directional silicone grip zones, breathable honeycomb fabric, and specialized seam placement to improve steering precision and long-session comfort. Why are the finger seams positioned externally?External finger seams move the stitching away from the inside of the fingers, reducing pressure points and improving comfort. Why does the thumb use an internal seam?The internally stitched thumb provides a closer, more sensitive feel when operating steering-wheel buttons, rotary controls, and paddle shifters. Do the gloves have silicone across the palm?Yes. Strategically positioned silicone grip zones improve traction while preserving steering-wheel sensitivity. Are the OMP ONE EVO FX Gloves suitable for endurance racing?Yes. Their pre-curved shape, breathable construction, and pressure-reducing seams are well suited for long sessions and endurance stints. What sizes are available?The OMP ONE EVO FX Gloves are available in sizes XS through XXL. How should the gloves fit?They should fit closely around the palm and fingers without restricting movement or leaving excess material at the fingertips. How should the OMP ONE EVO FX Gloves be cleaned?Follow the care instructions supplied by OMP. In general, avoid bleach, harsh chemicals, machine drying, and direct high heat that could damage the fire-resistant materials or silicone grip.

Sparco CRW Racing Gloves The Sparco CRW Racing Gloves are purpose-built for drivers competing in cold, damp, and challenging weather conditions. Their thermal neoprene construction helps retain warmth while maintaining the flexibility and steering-wheel feel needed for precise vehicle control. Thermally sealed seams help reduce moisture penetration, while the coated high-grip palm provides dependable traction when rain, spray, and low temperatures make the cockpit more difficult to manage. A flexible nylon and spandex outer layer supports natural hand movement without adding unnecessary bulk. Cold-Weather Protection for Motorsport Low temperatures can reduce hand dexterity, steering sensitivity, and driver comfort. The Sparco CRW Gloves provide added insulation for wet karting sessions, rally stages, autocross events, and other motorsport activities held in cold or unpredictable weather. The close-fitting construction helps preserve control of the steering wheel, paddle shifters, switches, and other cockpit components while providing more warmth than a traditional lightweight driving glove. Thermal Neoprene Construction Flexible neoprene forms the primary thermal layer of the Sparco CRW. The material helps retain body heat while conforming closely to the hand, allowing the driver to maintain a secure and natural grip. Unlike bulky winter gloves, the CRW is designed specifically for driving. Its streamlined shape limits excess material around the fingers and palm, helping preserve steering feedback and cockpit dexterity. Thermally Sealed Seams Thermally sealed seams help limit the entry of water and cold air through the glove construction. This provides improved comfort during light rain, track spray, damp paddock conditions, and low-temperature competition. The sealed design also helps retain warmth inside the glove, allowing the driver to remain focused when weather conditions begin to deteriorate. High-Grip Coated Palm A coated high-grip palm creates a secure connection between the driver and steering wheel. The grip surface is especially beneficial when the cockpit, wheel, or gloves become damp during wet-weather driving. The low-profile coating adds traction without creating excessive thickness, helping the driver retain steering sensitivity while reducing the need to squeeze the wheel tightly. Flexible Nylon and Spandex Outer Layer The exterior coating is constructed from 80% nylon and 20% spandex. This combination provides durability, stretch, and flexibility while allowing the glove to move naturally with the hand. The stretch outer layer supports repeated steering inputs and finger movement without compromising the thermal benefits of the neoprene construction. Elasticized Wrist An elasticized wrist provides a close, secure fit and helps reduce the entry of cold air. The streamlined closure also makes the gloves easy to put on and remove without requiring a bulky external adjustment strap. The extended wrist area provides additional coverage and can overlap with compatible outerwear or driving apparel for improved protection from the elements. Water-Resistant Construction The Sparco CRW Gloves are designed to resist moisture during damp and wet-weather use. Their neoprene materials and sealed seams help keep the hands warmer and more comfortable when exposed to rain or track spray. These gloves should be considered water resistant rather than completely waterproof, particularly during prolonged exposure or full immersion. Sparco CRW Racing Glove Features Thermal neoprene construction for cold-weather driving Thermally sealed seams help reduce moisture penetration Coated high-grip palm improves steering-wheel control Ergonomic shape supports natural hand movement Flexible construction helps preserve steering feedback Elasticized wrist helps retain warmth and block cold air Water-resistant design for damp and wet conditions Outer coating constructed from 80% nylon and 20% spandex Suitable for karting, rally, autocross, and track-day use Sparco CRW Glove Specifications Manufacturer: Sparco Model: CRW Product Type: Cold and Wet-Weather Racing Gloves Primary Material: Thermal Neoprene Outer Material: 80% Nylon and 20% Spandex Palm: Coated High-Grip Surface Seams: Thermally Sealed Wrist: Elasticized Entry Weather Protection: Water Resistant Recommended Conditions: Cold, Damp, and Wet-Weather Motorsport Why Choose the Sparco CRW Gloves? The Sparco CRW is designed for weather conditions where a conventional lightweight driving glove may not provide enough warmth or moisture protection. Its thermal neoprene construction, sealed seams, elasticized wrist, and coated palm work together to provide a practical balance of insulation, flexibility, and grip. For cold karting events, wet rally stages, early-season autocross competition, and rainy track days, the CRW helps drivers maintain comfort and confidence without sacrificing essential steering control. Sparco CRW Glove Size Chart Frequently Asked Questions Are the Sparco CRW Gloves waterproof?The gloves are water resistant and designed to help repel moisture during wet-weather driving. They are not intended to remain completely waterproof during prolonged exposure or full immersion. What conditions are the Sparco CRW Gloves designed for?They are designed for cold, damp, and wet motorsport conditions where additional warmth and moisture resistance are beneficial. What materials are used in the Sparco CRW Gloves?The gloves use a thermal neoprene construction with an outer coating made from 80% nylon and 20% spandex. Do the palms provide good steering-wheel grip?Yes. The coated high-grip palm is designed to improve traction and control, including when the steering wheel or gloves become damp. Will the neoprene construction restrict hand movement?The ergonomic shape and flexible materials are designed to provide warmth while preserving finger movement, steering feel, and cockpit dexterity. Do the gloves have sealed seams?Yes. Thermally sealed seams help reduce the entry of moisture and cold air while retaining warmth inside the gloves. Are the Sparco CRW Gloves suitable for karting?Yes. They are suitable for karting, rally, autocross, track days, and other driving activities held in cold or wet conditions. Are these gloves FIA homologated?The Sparco CRW is designed primarily as a cold and wet-weather driving glove. Confirm the current product certification and your sanctioning organization’s requirements before using it in an event that requires homologated fire-resistant gloves. Are the Sparco CRW Gloves suitable for warm-weather racing?They are primarily intended for cold and wet environments. A lighter and more breathable racing glove may be more comfortable in warm, dry conditions. How should the Sparco CRW Gloves be cleaned?Gently hand wash them with mild soap and cool water, then allow them to air dry completely. Avoid bleach, harsh chemicals, machine drying, and direct high heat.

Alpinestars GP Pro Comp Complete Driver Gear Bundle – Suit, Gloves & Shoes The Alpinestars GP Pro Comp Complete Driver Gear Bundle combines three premium pieces of Alpinestars racing equipment into one complete driver setup: Alpinestars GP Pro Comp Race Suit – Boot Cuff Leg Alpinestars Tech-1 ZX v3 Nomex Racing Gloves Alpinestars Tech-1 Z v2 Racing Shoes This bundle is designed for racers who want a coordinated Alpinestars setup without having to purchase each piece separately. Suit, glove, and shoe sizes can be selected individually so each part of the package can be properly fitted to the driver. Alpinestars GP Pro Comp Race Suit – Boot Cuff Leg The GP Pro Comp Race Suit provides lightweight fire-resistant protection with a driver-focused construction designed for comfort and mobility inside the cockpit. Its three-layer aramid construction is combined with strategically positioned stretch panels to reduce restriction while driving. The fully floating arm design helps improve shoulder and arm movement, while the pre-shaped construction is designed around the seated racing position. The boot cuff leg extends over the top of the racing shoe for the clean professional appearance commonly seen in high-level motorsport. GP Pro Comp Suit Features: FIA 8856-2000 homologated SFI 3.2A/5 certified Lightweight three-layer construction 100% aramid outer shell Boot cuff leg design Knitted stretch panels Fully floating arm construction Pre-shaped racing fit Tall ribbed collar Adjustable waist belt Double-slider YKK front zipper Integrated thigh pockets Alpinestars Tech-1 ZX v3 Nomex Racing Gloves The Tech-1 ZX v3 is a premium Alpinestars racing glove engineered for high levels of protection while maintaining excellent steering-wheel feedback. Its dual-layer honeycomb aramid construction provides fire-resistant protection without creating unnecessary bulk. External seams help reduce pressure points inside the glove, while the pre-curved fingers follow the natural position of the hand around the steering wheel. A 3D silicone grip pattern on the palm and fingers provides secure steering-wheel contact while maintaining excellent feel and flexibility. Tech-1 ZX v3 Glove Features: FIA 8856-2018 homologated Dual-layer honeycomb aramid construction External seams Pre-curved fingers and palm 3D silicone palm and finger grip Lightweight and breathable construction Excellent steering-wheel sensitivity Touchscreen-compatible thumb and index finger Alpinestars Tech-1 Z v2 Racing Shoes The Tech-1 Z v2 Racing Shoe is designed around lightweight construction, secure foot support, and precise pedal feel. Its close-fitting sock-style construction wraps around the foot and ankle while helping reduce unnecessary bulk. The Alpinestars speed-lacing system provides a secure fit, while the thin racing outsole helps maximize feedback through the throttle, brake, and clutch pedals. Perforated sections help improve airflow during long track sessions. Tech-1 Z v2 Shoe Features: SFI 3.3/5 homologated Premium bovine leather upper Sock-style ankle construction Aramid speed-lacing system Lace Lock System Para-aramid tubular lining Lightweight heel and footbed padding Perforated construction for ventilation Thin racing rubber outsole Excellent pedal sensitivity Integrated toe and heel reinforcement Complete Alpinestars Driver Setup This package creates a complete Alpinestars driver gear combination from the pedals to the steering wheel. The GP Pro Comp suit provides the primary layer of protection, the Tech-1 ZX v3 gloves provide secure steering-wheel grip and feedback, and the Tech-1 Z v2 shoes provide the sensitivity needed for precise pedal control. Because each item is sized independently, drivers do not have to compromise by purchasing a bundle with predetermined matching sizes. Bundle Certifications GP Pro Comp Suit: FIA 8856-2000 / SFI 3.2A/5 Tech-1 ZX v3 Gloves: FIA 8856-2018 Tech-1 Z v2 Shoes: SFI 3.3/5 Certification requirements can vary by racing organization and class. Always verify your sanctioning body's current requirements before competition. Questions About the Alpinestars Driver Gear Bundle Can I choose different sizes for the suit, gloves, and shoes?Yes. The suit, gloves, and shoes can each be sized individually so you can build the proper fit for your complete racing setup. Does the bundle include all three products?Yes. The bundle includes one GP Pro Comp boot cuff race suit, one pair of Tech-1 ZX v3 Nomex racing gloves, and one pair of Tech-1 Z v2 racing shoes. What does boot cuff leg mean?The boot cuff design allows the lower portion of the suit leg to extend over the top of the racing shoe rather than ending with a traditional elastic ankle cuff. Are all three pieces certified to the same standard?No. Each product carries its own certification based on the type of racing equipment. Always check your racing organization's requirements. Are the Tech-1 ZX v3 gloves designed for a close fit?Yes. They use a pre-curved, close-fitting racing design intended to minimize excess material and maintain steering-wheel feel. Are the Tech-1 Z v2 shoes designed for pedal feel?Yes. Their lightweight construction and thin racing sole are specifically designed to improve sensitivity and feedback through the pedals.

OMP First Evo Racing Gloves   The OMP First Evo Racing Gloves deliver premium comfort, responsive steering feel, and FIA-certified protection at an accessible price. Their lightweight construction combines external seams, a pre-curved hand shape, and low-profile silicone-rubber palm inserts to provide many of the features normally associated with higher-priced competition gloves. An elasticated wrist keeps the glove securely positioned without adding a bulky closure, while the straight-cut extended gauntlet provides clean overlap with a compatible racing suit sleeve. FIA 8856-2018 homologation makes the OMP First Evo a dependable option for modern motorsport competition. Premium Comfort Without the Premium Price The OMP First Evo is designed for drivers who want advanced glove construction without moving into the highest price category. Its streamlined design focuses on the features that make the greatest difference behind the wheel: reduced pressure points, secure grip, natural hand movement, and lightweight fire-resistant protection. This combination makes the First Evo a strong choice for drivers who value both performance and overall value. External Seams Reduce Pressure Points The primary finger seams are positioned on the outside of the glove rather than against the driver’s skin. This creates a smoother interior and reduces pressure along the fingers while gripping the steering wheel. External stitching is often found on premium racing gloves because it can significantly improve comfort during endurance races, testing sessions, and long track days. Pre-Curved Driving Fit The OMP First Evo is shaped around the natural position of the hand while holding a steering wheel. Its pre-curved fingers require less effort to close and help prevent excess material from gathering across the palm. This driving-specific shape promotes a more relaxed grip, reducing hand fatigue while maintaining precise operation of paddle shifters, switches, buttons, and gear levers. Printed Silicone-Rubber Palm Grip Fire-retardant silicone-rubber inserts are printed directly onto the palm to provide dependable steering-wheel traction with minimal added thickness. The low-profile grip improves control while preserving sensitivity through the wheel. Drivers can maintain a secure hold while still feeling steering resistance, vibration, and changes in front-end grip. Maximum Grip with Minimum Bulk The printed grip surface eliminates the need for a thick, separate palm reinforcement layer. This helps the glove flex naturally and keeps unnecessary material away from the primary steering-wheel contact areas. The combination of silicone grip and a pre-curved palm allows the driver to maintain control without squeezing the wheel excessively. Straight-Cut Extended Gauntlet The straight-cut gauntlet gives the OMP First Evo a clean, traditional appearance while providing additional wrist coverage. Its extended length helps maintain proper overlap with the sleeve of a compatible fire-resistant racing suit. The longer cuff is designed in accordance with current FIA homologation requirements for increased protection against heat and flame exposure. Elasticated Wrist for Secure Retention An elastic band around the wrist keeps the glove securely fitted without requiring a hook-and-loop strap. The flexible opening makes the First Evo easy to put on and remove while helping prevent unwanted movement during aggressive steering inputs. The strapless design also eliminates a bulky adjustment point beneath the racing suit sleeve. FIA 8856-2018 Homologated Protection The OMP First Evo Racing Gloves are certified to the FIA 8856-2018 standard for protective clothing used in automobile competition. Their fire-resistant construction and extended cuff provide current protection for the hands and wrists in demanding motorsport environments. Drivers should verify the exact glove certification required by their sanctioning organization before competition. OMP First Evo Nomex Glove Construction Lightweight fire-resistant racing glove construction External seams reduce interior pressure points Pre-curved fingers follow the natural driving position Printed fire-retardant silicone-rubber palm inserts Low-profile grip preserves steering sensitivity Straight-cut extended gauntlet Elastic wrist provides secure retention Easy on-and-off strapless design OMP First Evo Nomex Glove Protection Fire-resistant construction developed for auto racing Extended cuff increases wrist and sleeve coverage Designed for protection against heat and flame exposure FIA 8856-2018 homologated OMP First Evo Racing Glove Specifications Manufacturer: OMP Model: First Evo Product Type: Fire-Resistant Auto Racing Gloves Fit: Pre-curved Seams: External Palm: Printed fire-retardant silicone-rubber inserts Wrist: Elasticated Gauntlet: Straight-cut extended cuff Homologation: FIA 8856-2018 Why Drivers Choose the OMP First Evo The OMP First Evo combines several construction features normally associated with more expensive racing gloves. External seams help keep stitching away from the fingers, the pre-curved shape reduces hand fatigue, and the printed silicone palm provides secure traction without dulling steering feedback. For drivers seeking an FIA-approved glove with a refined fit, dependable grip, and strong overall value, the OMP First Evo is an excellent competition-ready choice. OMP First Evo Nomex Glove Size Chart Frequently Asked Questions Are the OMP First Evo Racing Gloves FIA approved?Yes. The OMP First Evo is homologated to the FIA 8856-2018 standard. What is the benefit of external seams?External seams move the main stitching away from the inside of the fingers, reducing pressure points and improving comfort while holding the steering wheel. Do the OMP First Evo Gloves have silicone palm grip?Yes. Fire-retardant silicone-rubber inserts are printed directly onto the palm to improve traction and steering sensitivity. How does the pre-curved shape improve comfort?The pre-curved design follows the natural position of the hand around the steering wheel, reducing resistance, material bunching, and fatigue. Do these gloves use a wrist strap?No. An elasticated wrist keeps the gloves securely positioned without a separate closure strap. Why does the OMP First Evo have an extended cuff?The extended gauntlet provides additional wrist protection and proper overlap with a compatible racing suit sleeve. How should OMP First Evo Racing Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips. Are the OMP First Evo Gloves comfortable for long races?Yes. Their external seams, pre-curved construction, lightweight design, and low-profile palm grip are intended to improve comfort during extended driving sessions.

OMP First Racing Gloves The OMP First Racing Gloves combine lightweight construction, precise steering feedback, and premium comfort at an accessible price. Designed with features commonly found on higher-priced competition gloves, the OMP First uses external seams, a pre-curved hand shape, and low-profile silicone-rubber palm grip to improve control while reducing driver fatigue. An elasticated wrist keeps the glove securely positioned without adding a bulky closure, while the straight-cut extended gauntlet provides clean overlap with a compatible racing suit sleeve. FIA 8856-2018 homologation makes the OMP First suitable for modern motorsport competition where current FIA-approved driver gloves are required. Premium Racing-Glove Features at an Accessible Price The OMP First is designed for drivers who want comfort and performance without stepping into the highest-priced glove category. Its construction focuses on the features that have the greatest effect behind the wheel: smooth internal comfort, secure steering-wheel grip, natural hand movement, and certified fire-resistant protection. The result is a dependable racing glove that feels refined without becoming overly complicated or bulky. External Seams for Maximum Comfort The finger seams are positioned on the outside of the glove rather than against the driver’s skin. This creates a smoother internal surface and reduces pressure points when the fingers are wrapped around the steering wheel. External stitching is often reserved for premium racing gloves because it can significantly improve comfort during long races, testing sessions, and repeated track use. Pre-Curved Driving Fit The OMP First is shaped around the natural position of the hand while gripping a steering wheel. Pre-curved fingers require less effort to close and help prevent excess material from bunching across the palm. This design supports a more relaxed grip, helping reduce hand fatigue while maintaining precise control of paddle shifters, switches, buttons, and gear levers. Printed Silicone-Rubber Palm Grip Fire-retardant silicone-rubber inserts are printed directly onto the palm to provide dependable steering-wheel traction with minimal added thickness. The low-profile grip pattern helps maintain sensitivity and allows the driver to feel steering resistance, vibration, and changes in front-end grip. Because the silicone is printed directly onto the glove, it improves control without creating the bulk of a separate palm reinforcement layer. Secure Grip with Minimal Material Bunching The grip zones are positioned to support the primary contact areas between the hand and steering wheel. This placement improves traction while allowing the glove to flex naturally through braking, cornering, and rapid steering corrections. The combination of a pre-curved shape and thin printed grip helps the glove remain stable without restricting movement. Straight-Cut Extended Gauntlet The straight-cut gauntlet gives the OMP First a clean, traditional appearance while providing additional wrist coverage. Its extended length helps maintain proper overlap with the sleeve of a compatible fire-resistant racing suit. The longer cuff is designed in accordance with current FIA homologation requirements for improved protection against heat and flame exposure. Elasticated Wrist for Easy Entry An elastic band around the wrist keeps the glove securely fitted without requiring a hook-and-loop strap. The flexible opening makes the OMP First easy to put on and remove between sessions while helping prevent unwanted movement during aggressive steering inputs. The strapless design also eliminates a bulky adjustment point beneath the racing suit cuff. FIA 8856-2018 Homologated Protection The OMP First Racing Gloves are certified to the FIA 8856-2018 standard for protective clothing used in automobile competition. The fire-resistant construction and extended cuff provide current protection for the hands and wrists in demanding motorsport environments. Drivers should verify the exact glove certification required by their sanctioning body before competition. OMP First Racing Glove Construction Lightweight fire-resistant racing glove construction External seams reduce interior pressure points Pre-curved fingers follow the natural driving position Printed fire-retardant silicone-rubber palm inserts Low-profile grip preserves steering sensitivity Strategically positioned grip zones reduce bunching Straight-cut extended gauntlet Elastic wrist provides secure retention Easy on-and-off strapless design OMP First Racing Glove Protection Fire-resistant materials designed for motorsport use Extended cuff provides increased wrist coverage Designed for protection against heat and flame exposure FIA 8856-2018 homologated OMP First Racing Glove Specifications Manufacturer: OMP Model: First Product Type: Fire-Resistant Auto Racing Gloves Fit: Pre-curved Seams: External Palm: Printed fire-retardant silicone-rubber inserts Wrist: Elasticated Gauntlet: Straight-cut extended cuff Homologation: FIA 8856-2018 Why Drivers Choose the OMP First The OMP First delivers several construction features normally associated with more expensive racing gloves. External seams help keep stitching away from the fingers, the pre-curved shape reduces hand fatigue, and the printed silicone palm provides secure traction without dulling steering feedback. For drivers seeking an FIA-approved glove with a comfortable fit, dependable grip, and strong overall value, the OMP First remains a proven competition choice. OMP First Racing Glove Size Chart Frequently Asked Questions Are the OMP First Racing Gloves FIA approved?Yes. The OMP First Racing Gloves are homologated to the FIA 8856-2018 standard. What is the advantage of external seams?External seams move the main stitching away from the inside of the fingers, reducing pressure points while gripping the steering wheel. Do the OMP First Gloves have silicone palm grip?Yes. Fire-retardant silicone-rubber inserts are printed directly onto the palm to improve traction and steering sensitivity. How does the pre-curved design improve comfort?The pre-curved shape follows the natural position of the hand around the steering wheel, reducing resistance, material bunching, and fatigue. Do these gloves have a wrist strap?No. An elasticated wrist keeps the glove securely positioned without a separate closure strap. Why does the OMP First have an extended cuff?The extended gauntlet provides additional wrist protection and proper overlap with a compatible racing suit sleeve. How should the OMP First Racing Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips. Are the OMP First Gloves comfortable for long races?Yes. Their external seams, pre-curved construction, lightweight design, and low-profile palm grip are intended to improve comfort during extended driving sessions.

Sabelt Geckotech TG-11 Auto Racing Gloves The Sabelt Geckotech TG-11 Auto Racing Gloves are engineered to provide FIA-certified protection, dependable steering-wheel grip, and a close, comfortable fit for competitive motorsport. Their lightweight, streamlined construction helps improve dexterity while reducing unnecessary bulk inside confined racing cockpits. A silicone-treated palm creates a secure connection with the steering wheel, while reinforced internal palm construction adds durability in high-wear areas. The updated ergonomic fit allows the gloves to follow the natural shape of the hands for improved comfort, control, and precision during demanding race conditions. FIA 8856-2018 Certified Protection The Sabelt TG-11 Geckotech Gloves are homologated to the FIA 8856-2018 standard for fire-resistant driver equipment. This certification makes them suitable for many professional, club-level, road-racing, endurance, rally, and international motorsport applications. Drivers should always confirm the required safety standard with their racing organization or sanctioning body before competition. Silicone Palm Grip The Geckotech palm uses strategically applied silicone grip material to improve contact with the steering wheel. This high-grip surface helps reduce unwanted hand movement and allows the driver to maintain accurate steering input without applying excessive gripping pressure. Improved palm traction can also help reduce hand fatigue during long races, track sessions, and high-vibration driving conditions. Reinforced Internal Palm A strengthened internal palm increases durability in the areas exposed to the greatest pressure and friction. This reinforcement helps the TG-11 withstand repeated use while maintaining the flexibility and steering-wheel feel required for competitive driving. The durable construction makes these gloves well suited for drivers who regularly participate in racing, testing, instruction, or performance track events. Updated Ergonomic Fit Sabelt developed the TG-11 with an updated fit that follows the natural shape of the hand. The close-fitting construction reduces excess material around the palm and fingers, improving dexterity and reducing distraction inside the cockpit. The streamlined design also makes it easier to operate paddle shifters, steering-wheel buttons, switches, and other controls while maintaining a secure grip. Lightweight, Streamlined Construction The Geckotech TG-11 features a clean, low-profile design developed for comfort and performance. Its lightweight construction helps preserve natural hand movement while minimizing bulky material around the fingers, palm, and wrist. This driver-focused shape provides a precise feel that is suitable for sprint races, endurance events, rally competition, time trials, autocross, and performance driving. Sabelt Geckotech TG-11 Glove Features Premium fire-resistant auto-racing glove construction FIA 8856-2018 homologated Silicone-treated palm for enhanced steering-wheel grip Reinforced internal palm for improved durability Updated ergonomic fit Streamlined construction reduces excess bulk Designed for improved dexterity and steering precision Suitable for confined racing cockpits Available in black, red, and white Available in sizes 8 through 12 Sabelt Geckotech TG-11 Specifications Manufacturer: Sabelt Model: Geckotech TG-11 SKU: RFTG11 Homologation: FIA 8856-2018 Available Sizes: 8–12 Available Colors: Black, Red, and White Ideal for Multiple Motorsport Disciplines The Sabelt TG-11 is designed for drivers who need certified fire protection and reliable control across a wide range of motorsport applications. Its silicone grip, reinforced palm, and close ergonomic fit make it suitable for circuit racing, endurance competition, rally, time trials, autocross, and performance track driving. The lightweight construction provides the control required for short sprint events while remaining comfortable enough for extended driving sessions. Why Choose Sabelt Geckotech TG-11 Racing Gloves? The Sabelt Geckotech TG-11 combines FIA-approved protection with a high-grip palm and durable driver-focused construction. Its streamlined shape minimizes bulk, while the updated ergonomic fit provides a secure and natural connection with the steering wheel. For drivers seeking a modern Sabelt racing glove with dependable grip, reinforced durability, and FIA 8856-2018 homologation, the TG-11 offers an excellent balance of protection, comfort, and control. Sabelt Geckotech TG-11 Auto Racing Glove Size Chart Frequently Asked Questions What safety certification do the Sabelt TG-11 Gloves have?The Sabelt Geckotech TG-11 Gloves are homologated to the FIA 8856-2018 standard. Do these gloves have silicone palm grip?Yes. The palm features silicone grip material designed to improve steering-wheel control and reduce unwanted hand movement. Is the palm reinforced?Yes. The internal palm is strengthened to improve durability in high-wear areas. What sizes are available?The Sabelt Geckotech TG-11 Racing Gloves are available in sizes 8 through 12. What colors are available?Available color options include black, red, and white. How should Sabelt racing gloves fit?They should fit closely around the hand and fingers without restricting movement or creating uncomfortable pressure at the fingertips. Are these gloves suitable for track days?Yes. They are suitable for racing, track days, time trials, driver instruction, and other performance-driving applications where FIA-approved gloves are preferred or required. Can the Sabelt TG-11 Gloves be washed?Follow the care instructions supplied by Sabelt. Avoid harsh detergents, bleach, high heat, or cleaning methods that could damage the fire-resistant materials.

OMP Tecnica FIA 8856-2018 Racing Gloves The OMP Tecnica Racing Gloves provide FIA-certified fire protection, precise steering-wheel feel, and dependable comfort for demanding motorsport applications. Their anatomical, pre-curved construction follows the natural shape of the hand to help reduce fatigue during qualifying sessions, sprint races, endurance events, and performance track driving. Multi-zone silicone grip material across the palm and fingers provides secure contact with the steering wheel, shifter, and paddle controls. A breathable, flame-resistant construction and flexible back panel help manage heat while preserving the close fit required for accurate cockpit control. Certified to the FIA 8856-2018 standard, the OMP Tecnica is designed for drivers who need competition-approved protection without sacrificing sensitivity, flexibility, or comfort. Pre-Curved Anatomical Fit The OMP Tecnica features pre-curved fingers that follow the natural position of the hand around the steering wheel. This construction reduces resistance through the fingers and allows the driver to maintain a more relaxed grip during extended sessions. The close anatomical fit also improves dexterity when operating paddle shifters, steering-wheel buttons, switches, sequential shifters, and other cockpit controls. Multi-Zone Silicone Palm Grip High-grip silicone material is strategically printed across the palm and fingers to provide dependable steering-wheel traction. The grip pattern is positioned to support the primary contact areas used during braking, cornering, shifting, and rapid steering inputs. The low-profile silicone surface helps preserve steering feedback while reducing the amount of gripping pressure needed to maintain control. This can help minimize hand fatigue during long races and repeated track sessions. Comfort-Focused Seam Construction The Tecnica glove construction is designed to minimize uncomfortable pressure points around the fingers and palm. Its carefully positioned seams create a smooth interior feel while maintaining the durability required for repeated competition use. This comfort-focused design is especially beneficial during endurance racing and other applications where the driver's hands remain wrapped around the steering wheel for extended periods. Breathable Flame-Resistant Construction Fire-resistant materials provide certified motorsport protection, while the breathable upper construction helps manage heat inside the glove. A flexible back section allows the glove to move naturally as the driver grips and releases the steering wheel. The combination of ventilation, stretch, and close-fitting construction provides a balance of cooling, flexibility, and protection without adding unnecessary bulk. Elastic Wrist and Pull Tab An elasticated wrist helps hold the glove securely in place while maintaining a streamlined fit beneath the sleeve of a compatible racing suit. The integrated pull tab makes the glove easier to put on between sessions. The low-profile wrist construction eliminates the need for a bulky external closure and provides dependable overlap with the racing-suit sleeve. FIA 8856-2018 Homologated The OMP Tecnica Racing Gloves are homologated to the FIA 8856-2018 standard for protective clothing used in automobile competition. This certification makes them suitable for many professional, amateur, club-level, endurance, rally, and road-racing applications. Drivers should confirm the required certification and homologation date with their racing organization or sanctioning body before competition. OMP Tecnica Racing Glove Features Fire-resistant auto-racing glove construction FIA 8856-2018 homologated Anatomical racing fit Pre-curved fingers reduce resistance and hand fatigue Multi-zone silicone grip across the palm and fingers Grip pattern optimized for the steering wheel and shifting controls Comfort-focused seams help reduce pressure points Breathable upper construction helps manage heat Flexible back panel supports natural hand movement Elastic wrist provides a secure, streamlined fit Pull tab assists with entry and removal Designed for sprint and endurance racing OMP Tecnica Racing Glove Specifications Manufacturer: OMP Model: Tecnica Product Type: Auto Racing Gloves Certification: FIA 8856-2018 Fit: Anatomical with pre-curved fingers Grip: Multi-zone silicone palm and finger print Wrist: Elasticated with pull tab Recommended Use: Auto racing, endurance competition, sprint racing, HPDE, and track driving Care: Hand wash cold and air dry away from direct heat Ideal for Multiple Motorsport Applications The OMP Tecnica Racing Gloves are designed for a wide range of competitive and performance-driving applications, including: Circuit racing Endurance racing Sprint racing Sports-car competition Touring-car racing Rally and time trials Autocross Driver instruction HPDE and performance track driving Why Choose OMP Tecnica Racing Gloves? The OMP Tecnica combines FIA-certified protection with the grip, dexterity, and comfort required for serious competition. Its pre-curved fingers provide a natural steering-wheel position, while the strategically placed silicone print delivers confident control without limiting feedback. Breathable flame-resistant materials, a flexible back panel, and a streamlined elastic wrist make the Tecnica suitable for both short qualifying runs and extended endurance stints. It is a strong choice for drivers seeking dependable protection and precise control in a lightweight racing glove. OMP Tecnica Glove Size Chart Frequently Asked Questions Are the OMP Tecnica Racing Gloves FIA approved?Yes. The OMP Tecnica is homologated to the FIA 8856-2018 standard for protective clothing used in automobile competition. How should OMP Tecnica Gloves fit?They should fit closely around the hand and fingers without restricting movement. There should not be excessive material at the fingertips or uncomfortable pressure across the palm. What type of grip is used on the palm?The Tecnica uses strategically positioned silicone grip material across the palm and fingers for secure steering-wheel, shifter, and paddle contact. What is the benefit of the pre-curved fingers?The pre-curved shape follows the natural position of the hand around the steering wheel, reducing resistance and helping minimize fatigue. Are the OMP Tecnica Gloves suitable for endurance racing?Yes. Their breathable construction, flexible fit, silicone palm grip, and comfort-focused design make them well suited for extended driving sessions. Can these gloves be used with paddle shifters?Yes. The close anatomical fit and finger grip zones provide the dexterity needed to operate paddle shifters and steering-wheel controls. Do the gloves use a wrist strap?No. An elasticated wrist provides a secure, streamlined fit without a bulky external closure. How should OMP Tecnica Racing Gloves be cleaned?Hand wash them in cold water using a mild detergent, then allow them to air dry away from direct sunlight or heat. Do not use a clothes dryer. Will the silicone palm grip wear over time?All grip surfaces can show wear with repeated use. Longevity depends on the steering-wheel material, frequency of use, storage conditions, and cleaning practices.

OMP Sport Gloves FIA 8856-2018 The OMP Sport Gloves provide modern FIA-certified protection, dependable steering-wheel grip, and lightweight comfort at an accessible price. Designed for drivers who need certified fire-resistant gloves without unnecessary bulk, the OMP Sport combines a silicone-printed palm, flexible construction, and an elastic wrist opening for a secure, straightforward fit. Certified to FIA 8856-2018, these gloves are built for competitive motorsport while remaining comfortable enough for extended driving sessions. Multiple color options make it easy to coordinate the OMP Sport Gloves with your racing suit, shoes, helmet, or team colors. Lightweight Fire-Resistant Racing Gloves The OMP Sport is designed to provide essential protection without making the glove feel heavy or restrictive. Its lightweight fire-resistant construction allows natural finger movement and helps reduce hand fatigue during longer sessions. The streamlined design also minimizes unnecessary material between the driver and the steering wheel, supporting clear feedback and precise control. Silicone-Printed Palm Grip A silicone grip pattern is printed directly onto the palm to improve traction against the steering wheel. The low-profile application provides a secure hold without adding the thickness of a separate reinforcement layer. The printed silicone helps the driver maintain consistent control during braking, cornering, shifting, and repeated steering corrections while preserving sensitivity through the wheel. Reliable Grip as Temperatures Rise Steering wheels and cockpit surfaces can become warm during extended sessions. The silicone-printed palm helps maintain traction as temperatures increase, reducing the need to squeeze the wheel excessively. A more relaxed grip can improve comfort and help the driver maintain smoother steering inputs over the course of a race or track session. Elastic Wrist Entry An elasticated wrist opening makes the OMP Sport Gloves easy to put on and remove while maintaining a snug fit once worn. The strapless design avoids bulky closures and allows clean overlap with a compatible racing suit sleeve. The elastic wrist also helps prevent the glove from shifting during aggressive steering inputs or rapid cockpit movements. Comfort for Extended Driving Sessions The OMP Sport Gloves are shaped to remain comfortable during prolonged use. Their lightweight materials and uncomplicated construction allow the hand to flex naturally around the steering wheel, shifter, and cockpit controls. The glove’s close fit helps reduce excess material at the fingertips and palm, improving dexterity without sacrificing fire-resistant coverage. FIA 8856-2018 Homologated Protection The OMP Sport Gloves are certified to the FIA 8856-2018 homologation standard for protective clothing used in automobile competition. This certification makes them suitable for racing organizations and events that require current FIA-approved fire-resistant driver gloves. Drivers should confirm the specific equipment rules of their sanctioning organization before competition. OMP Sport Nomex Glove Features Lightweight fire-resistant racing glove construction Silicone-printed palm provides dependable steering-wheel grip Low-profile grip pattern preserves steering sensitivity Elastic wrist allows easy entry and secure retention Strapless design reduces bulk beneath the racing suit sleeve Comfortable construction for extended driving sessions Available in multiple color options FIA 8856-2018 homologated OMP Sport Racing Glove Specifications Manufacturer: OMP Model: Sport Product Type: Fire-Resistant Auto Racing Gloves Palm: Silicone-printed grip Wrist: Elasticated entry Closure: Strapless Construction: Lightweight fire-resistant material Homologation: FIA 8856-2018 Accessible FIA-Certified Performance The OMP Sport focuses on the features drivers need most: certified fire protection, secure palm grip, comfortable wrist retention, and a lightweight feel. Its simple construction makes it a practical option for drivers purchasing their first FIA-approved gloves or replacing older equipment with a current homologation. For drivers who value straightforward performance and reliable protection, the OMP Sport delivers a strong balance of comfort, grip, and affordability. OMP Sport Nomex Glove Size Chart Frequently Asked Questions Are the OMP Sport Gloves FIA approved?Yes. The OMP Sport Gloves are homologated to the FIA 8856-2018 standard. Can these gloves be used for wheel-to-wheel racing?Yes, provided the racing organization accepts FIA 8856-2018-certified gloves. Always confirm the current rules for your series or event. How do the OMP Sport Gloves fit?They follow OMP’s standard glove fit and should feel close around the fingers and palm without restricting movement. A snug new fit may relax slightly after several sessions. Do the gloves have silicone palm grip?Yes. Silicone is printed directly onto the palm to improve steering-wheel traction while preserving sensitivity. Does the silicone maintain grip when the steering wheel becomes warm?Yes. The printed silicone is designed to provide consistent traction during extended driving sessions as cockpit temperatures increase. Do the OMP Sport Gloves have a wrist strap?No. An elasticated wrist opening keeps the gloves securely fitted without a separate adjustment strap. Are the OMP Sport Gloves comfortable for long sessions?Yes. Their lightweight construction and low-bulk palm design help reduce hand fatigue during extended driving. How should racing gloves fit at the fingertips?There should be minimal excess material beyond the fingertips. The gloves should fit closely without compressing the fingers or limiting movement.