Stilo Anti-Fog/Anti-Scratch Visor for the ST5 Helmet Stilo ST5 visors fit all Stilo SA2020, SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 10 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. From the Stilo dark smoke to a selection of multiple iridiums, Stilo ST5 visors are a great way to ensure your best vision and lap time. Stilo ST5 GT Visor Part Number Chart: STI-YA0800 ST5 Clear Visor STI-YA0801 ST5 Smoked medium visor STI-YA0802 ST5 Smoked dark visor STI-YA0803 ST5 Mirror medium visor STI-YA0804 ST5 Mirror dark visor STI-YA0805 ST5 Iridium blue medium visor STI-YA0806 ST5 Iridium blue dark visor STI-YA0807.2 ST5 Iridium red medium visor STI-YA0808 ST5 Iridium red dark visor STI-YA0809.2 ST5 Iridium yellow medium visor - Not FIA Certified STI-YA0810 ST5 Iridium yellow dark visor - Not FIA Certified STI-YA0813 ST5 Amber visor - Not FIA Certified STI-YA0814 ST5 Clear double glazed visor - Dirt / Offroad Friendly STI-YA0815 ST5 Clear double glazed visor - Not FIA Certified STI-YA0816 ST5 Sun screen short visor STI-YA0821 ST5 Visor sun strip blocker STI-YA0817 ST5 Visor screw kit STI-YA0818 ST5 Visor locking pin replacement STI-YA0851 ST5 Clear Anti-Scratch No Anti-Fog - Dirt / Offroad Friendly High quality, Anti-fog visors shaped for the Stilo ST5 GT helmets. The Stilo ST5 series is unique in that the shield lock is located in the center position of the shield. The shield lock is released by squeezing the outboard sides together and that will then release it from the mount stud that is located in the center of the helmet. The reason for this is to "clean-up" the sides of the helmet where a side impact in a head containment seat may grab parts of the helmet. All Stilo ST5 shilds have the center release mechanism installed on it.All Stilo ST5 shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a micro fiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single pass works best. Repeat if necessary, but usually one pass works great.Stilo Visor Care: Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. This is the official Stilo Visor Cleaner.

CMS Performance Racing Backpack This high-quality backpack is designed to carry your helmet and HANS device along with lots of other racing gear. It features a durable heavy-duty nylon exterior with a padded interior held closed with heavy duty zippers for years of use. The CMS Performance Racing Backpack has three zippered compartments: a main compartment large enough for a helmet, HANS, and other accessories; a smaller compartment to hold gear separate from your helmet; and a zippered pocket for you phone, keys, lap timer, etc. This versatile racing tote can be worn like a backpack, allowing you to carry more gear, or it can be carried by its carry handle. It also features an elasticized waterproof rain cover. Stowed in a zippered pocket, the cover is easily stretched over the whole backpack to keep contents dry at a moment's notice. ADDITIONAL FEATURES: Padded adjustable shoulder straps for comfort and convenience Thick padding keeps the backpack's contents isolated from your back while wearing Large rubberized non-slip carrying handle Convenient super-wide opening easily accommodates any size helmet Heavy-duty zippers and durable construction for years of hassle free use DIMENSIONS: Main compartment: 18" x 10" x 10" (45cm x 25cm x 25cm) Secondary compartment: 10" x 9" x 6" (25cm x 23cm x 15cm) Zippered pocket: 12" x 8" x 2" (30cm x 20cm x 5cm)    

Alpinestars Flow v3 Drying Helmet Bag Attention all race track aficionados and tarmac adventurers! Introducing the Alpinestars Flow V3 Helmet Bag - not just any pit stop for your headgear, but a luxury penthouse suite! This isn't just a bag; it's the VIP treatment your helmet deserves after a day of white-knuckled, pedal-to-the-metal action. Constructed from a lightweight and durable polyester shell, the Flow V3 isn't just another pretty face in the pit lane. It's tough enough to handle the rigors of travel without weighing you down – because we know the last thing you need is extra baggage on race day. Designed with your full-face helmet and HANS device in mind, it cradles your gear like a newborn, but with the muscle of a pit lane pro. The plush fleece lining is so soft, your helmet might just get a little too comfortable. But hey, even your head's champion deserves a cozy spot, right? Now, let's talk about the built-in helmet dryer and mesh inserts. These features are like having a personal pit crew for your helmet, working overtime to wick away moisture and keep your helmet as fresh as your reflexes on the start line. Because nothing says "ready to rumble" like a crisp, dry helmet. Got gadgets? The Flow V3's got you covered with an internal USB port nestled inside the main compartment, ensuring you're always powered up and ready to go. Whether it's a camera to capture your track triumphs or a phone to call your mom (because hey, even racers need their moms), your tech is as secure as your head when it's race time. Don't even get us started on the rubberized bottom base. It’s as rigid and reliable as your determination to nail the apex on every turn. It ensures your helmet’s safe and sound, no matter if you're on gravel or grass. Side compartment? Spacious is an understatement. You could fit your gloves, glasses, and probably a sandwich in there (because who races on an empty stomach?). The fleece inner lining in this pocket is like adding a silk robe to your helmet's wardrobe, extra protection for those extra special accessories. Transportation is a breeze with double grab handles and a removable shoulder strap that makes carrying it as effortless as cruising down the straightaway. With a parallel zip opening, you'll have your gear in and out faster than a pit stop at Monza. Alpinestars Flow v3 Drying Helmet Bag Specifications Lightweight and durable polyester shell Full-face helmet and HANS device accommodation Built-in helmet dryer and mesh inserts for moisture wicking Internal USB in the main compartment Rigid, rubberized base for secure placement Spacious side compartment for accessories Plush fleece lining for protection Double grab handles and removable shoulder strap for easy transportation Quick access with parallel zip opening Fasten Your Seatbelt  Don’t let your helmet slump in some mundane bag. Give it the luxury pit stop it deserves with the Alpinestars Flow V3 Helmet Bag. Click that button, seal the deal, and keep your headgear as pampered and prepared as you are on race day. Order now and secure the ultimate co-pilot for your helmet – because your head's chariot should ride in style!  Helmet and HANS device not included.

Arai GP-5W Replacement Shields Replacement shields for the Arai GP-5W auto racing helmet.

Arai GP-7 Anti-Fog Helmet Shields Available in a variety of colors and tints, these replacement shields fit all versions of the Arai GP-7 SA2020 helmet.   The GP-7 series actually fits two different Arai helmet models. The GP-7, and of course the Arai every auto racer wants, the Arai GP-7SRC. All Arai shields we offer at DiscoveryParts.com are Genuine Arai in standard, Anti-Fog, Dual Pane, and with the Arai Visor Tint Strip ontop You know how well your helmet was crafted when it was built and the same care and exacting standards are used in your new Arai GP-7 shields.

Bell SE03 Helmet Shields Bell SE03 Double Screen Anti-Fog (DSAF) helmet shields are specifically designed for the SA2015 Bell GP.3 and GTX.3 helmets (including carbon fiber models), and the SA2010 Bell HP3 Carbon Helmet. The Double Screen Anti-Fog treatment features variable thickness that exceeds 5mm in the field of vision for excellent clarity and fog-control. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) SHIELD TINTS & COLORS Clear (no tint) Amber Yellow Light Smoke Dark Smoke Blue Chrome Silver Chrome Gold Chrome Red Chrome Rainbow Mirror  Multilayer Red Multilayer Blue Multilayer Green

Molecule Refresh Race Fabric Deodorizer Molecule Refresh gives your racing garments a quick breath of fresh air, reducing odors of all types on technical fabrics like Aramid and Nomex. Refresh is more than just a cover-up; it contains antimicrobial agents to inhibit the growth of odor-causing bacteria while maintaining fabric breathability. Cosmetics-grade, skin-friendly ingredients ensure that your race suit, underlayers, gloves, etc. stay comfortable. With its light, fresh scent, Molecule Refresh is recommended for technical fabrics, including Nomex. DETAILS Contains proprietary Pico12 suppression technology to inhibit growth of odors Reduces odors on all types of technical fabrics Cosmetic-grade, skin-friendly and sanitizing ingredients FDA compliant antimicrobial – BKC Maintains fabric breathability Light fresh scent 16 oz. size designed for larger surfaces, uniforms, bags and other equipment Molecule Refresh is a lightly scented spray specifically formulated to deodorize performance wear and equipment. Cosmetic-grade formula contains proprietary Pico12 suppression technology to attack odors at the source and inhibit growth. Containing benzalkonium chloride (BKC) sanitizing ingredient, Refresh keeps you clean, healthy and performing at your best. INSTRUCTIONS FOR USE Allow garment or equipment to air dry. Shake well and spray Molecule Refresh evenly, covering all surfaces. Allow garment to fully dry in a well-ventilated area before wearing. Becomes more effective with repeated use.

Bell Racing Helmets SE06 3mm Helmet Shield Bell SE06 helmet shields are specifically designed for the SA2020 Bell HP6 and GT6 helmets. These 3mm injection-molded optically correct polycarbonate face shield with Double Screen Anti-Fog (DSAF) insert for superior fog control. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.)

Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air System Fresh air keeps you cool and keeps sweat from getting in your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This unique cooling system feeds air from your car's fresh air system to both the top of your head and to the front of your face, while at the same time helping keep the inside of your visor clear. This system integrates into the existing design of the ST5 helmet and does not require any drilling of the shell or modifications to the internal EPS foam. There are four small ventilation holes molded into the top of every ST5 & ST6 helmet. Stilo's Top Air system fits over the forward two holes and extends down the front of the helmet and just under the top of the visor. Air fed into the Top Air is directed both to the top of the head and down over the face. A small deflector just inside the visor area directs air towards the visor and away from the eyes. Old air flows out of the rear holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Top Air System can be fitted to all Stilo ST5 or ST6 model helmets.

Bell Racing Helmets SE07 3mm Helmet Shield Bell SE07 helmet shields are specifically designed for the SA2020 Bell RS7 and HP7 helmets. These 3mm injection-molded optically correct polycarbonate face shield with Double Screen Anti-Fog (DSAF) insert for superior fog control. The SE07 shield uses the SV (SE07) pivot kit, is compatible with tear offs, and is available in a variety of tint colors. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) DOES NOT FIT KC7-CMR. KC7 helmets require the SE07 2mm shield. AVAILABLE TINT COLORS FOR BELL RACING SE07 VISOR: Clear Light Smoke Dark Smoke Yellow Silver Mirror Blue Mirror Rainbow Iridium Mirror Multi-Layer Blue Multi-Layer Red

Bell Racing Helmets SE077 3mm Helmet Shield Bell SE077 helmet shields are specifically designed for the Bell HP77 helmet. The SE077 is a 3mm, injection-molded, optically correct polycarbonate face shield with a Double Screen Anti-Fog (DSAF) insert for superior fog control. The SE077 shield uses the Bell SV (SE07, SE077) pivot kit. It is compatible with tear offs and is available in a variety of tint colors. Bell recommends that you periodically replace your helmet shield to maintain optimal vision and safety. All shields come with adjustable tear-off posts. (Tear-offs sold separately.) SHIELD TINT/COATING OPTIONS Clear Smoke Dark Smoke Silver Mirror Gold Mirror Blue Mirror Red Mirror Rainbow Iridium Mirror Red Multi-Layer Smoke Blue Multi-Layer Smoke Green Multi-Layer Smoke Gold Multi-Layer Smoke Purple Multi-Layer Smoke

Stilo WRC Intercom Systems The Stilo WRC Series Intercom Systems were designed to be securely installed on the roll bar, where it's easy to reach and convenient to adjust. They plug directly into your Stilo helmet with the included IMSA cables for clear, pitch-perfect audio while on track. The WRC Series feature an automatic On/Off switch controlled through co-driver plug connection; no more starting races disconnected. Individual volume adjustment for each connected helmet. Nine-volt power supply standard (uses a 9V battery), with 12V available as option to plug into the car's electrical supply. Camera and radio connections are also possible with these units. WRC 03 INTERCOM SYSTEM The Stilo WRC 03 intercom is equipped with top-of-the-line WRC electronics. Designed for compatibility with Trophy Plus, WRC, and ST5 helmets, as well as WRC headsets. Amplify sound clarity with matched electronics. Runs on standard 9-volt battery, with optional car adapter for continuous power. WRC DES INTERCOM SYSTEM The WRC DES includes an advanced noise-canceling "extra filter" which effectively eliminates background noise to make driver/co-driver communications clearer than ever! WRC DG-10 INTERCOM SYSTEM For more advanced communication needs, the DG-10 includes noise-cancellation as well as a Bluetooth connection for simplicity at its finest. DG-10 Includes the following: Digital active noise cancellation with SDA filter Integrated Bluetooth for mobile phone connection Camera and radio connections WRC DG-30 INTERCOM SYSTEM Digital active noise cancellation with SDA filter Separate main intercom box which can be positioned under the seats to offer a lower center of gravity Remote control panel GSM module integrated into the intercom box with a SIM card slot Camera and radio connections DG-30 includes the following: Main unit with GSM module integrated remote control panel external aerial Stilo WRC 03 SKU: AB0200 Stilo WRC-DES SKU: AB0214 Stilo WRC DG-10 SKU: AB0500 Stilo WRC DG-30 SKU: AB0600