Stilo ST5 Thin 2mil Perimeter Seal Tearoff Pack qty 30 (3 Sleeves of 10) Protect Your Stilo ST5 Helmet Shield From Rocks, Dirt, and Debris with these 2 mil thick tearoffs. Measuring 2 mil thickness (the most popular thickness for dirt track racers), it is intended for road racing and/or dirt track use. The perimeter seal system used in these tearoffs provides a tighter fit against the visor, blocking out dirt, dust, and water from getting between the visor and tearoff stack. This package of 2 mil tear-offs are in 3 stacks of 10 per package (30 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo ST5 2mm Perimeter Seal Tearoff Pack Quantity 30 (3 Sleeves of 10) Details: Manufacturer: Stilo Manufacturer part numbers:10259CP Thickness each: 2 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 3 Stacks of 10 tear-offs glued together Note: This is the thinner of tearoffs (2 mil) for your Stilo ST5 series helmets. It is used primarily in Dirt Track Racing where you need more pulls in a race

Keep Your Stilo Helmet Ventilated With The Stilo Top Air 90 Degree Maglock Kit  The exclusive Stilo "Top Air System" for ST5 or ST6 helmets takes fresh air to the driver's head and is fitted with an outlet designed to work with a Maglock system. With the innovative 90 degree system you can now make quick air connection with your Stilo ST5. Does not come with a flow adjuster. Air enters in through four small ventilation holes molded into the top of every ST5 and ST6 helmet. Air fed into the Top Air is directed to the top of the head.  Old air flows out of the side holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Top Air 90 Degree Maglock System can be fitted to all Stilo ST5 and ST6 model helmets.  SKU: YA0892-90

Keep Your Stilo Helmet Ventilated With The Stilo Top Air Maglock Kit  The exclusive Stilo "Top Air System" for ST5 helmets takes fresh air to the driver's head and is fitted with an outlet designed to work with a Maglock system. With the new innovative Top Air outlet you can now make quick air connection with your Stilo ST5 & ST6. Does not come with a flow adjuster. Air enters in through four small ventilation holes molded into the top of every ST5 or ST6 helmet. Air fed into the Top Air is directed to the top of the head.  Old air flows out of the side holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Short Top Air Maglock System can be fitted to all Stilo ST5 or ST6 model helmets.    SKU: YA0892-S

Stilo ST6 Helmet Shield Visors Colorful anti-fog/anti-scratch shields for your Stilo ST6 (non-ABP) helmet These Stilo visors are a great way to add some color to your racing life! Stilo offers a wide variety of shield options including many popular iridium colors. All Stilo shields have an anti-fog and anti-scratch coating and are made for a perfect fit on your Stilo ST6 helmet (both the GT and N "naked" versions).

Stilo ST5 CHEEK PADS With USA FLAG Elevate your racing experience with the Stilo ST5 Cheek Pads, now featuring a patriotic touch with the American flag embroidered into each pad. Designed to offer unparalleled comfort and personalized fit, these cheek pads allow drivers to tailor their helmet for optimal performance on the track. Available in a range of thicknesses including 20mm, 25mm, 30mm, 33mm, and 35mm, these cheek pads provide the flexibility to accommodate different head shapes and comfort preferences. Whether you're aiming for a snug fit or a bit more room to maneuver, our cheek pads ensure maximum comfort and stability during every race. To ensure the best fitting experience, we highly recommend visiting one of our authorized Stilo dealers. Our expert staff will assist you in selecting the appropriate cheek pad size to complement your helmet size and enhance your overall racing experience. It's important to note that Stilo helmets are known for their snug fit, and our cheek pads offer the added benefit of adjustability even after purchasing your helmet. With the American flag embroidered into each pad, you can showcase your patriotism while enjoying customized comfort and performance on the track.

Stilo Visor Stocking Bag Stilo gives you one free Visor Stocking Bag with every new shield, but having an extra is a great idea to make sure your Stilo shields have the longest life possible. Constructed of soft micro-fiber with a draw string and ball lock, this Stilo visor stocking bag keeps your Stilo visor protected. Works perfectly with all Stilo ST4 and ST5 Composite, Offshore, Carbon, 8860, and 8860 Zero helmet shields. Stilo Visor Stocking Bag Details: Manufacturer: Stilo Manufacturer part number: YY0014 Fitment: Stilo ST4, and ST5 Composite, Offshore, Carbon, 8860, and 8860 Zero helmet shields  

Stilo Cheek Pads Replacement cheek pads for Stilo ST5 / ST5.1 helmets help you customize your helmet to provide the perfect fit!

Stilo Anti-Fog/Anti-Scratch Short Visor for the ST5 Helmet Stilo ST5 short visors fit all Stilo SA2020, SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 4 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. From the Stilo dark smoke to a selection of multiple iridiums, Stilo ST5 visors are a great way to ensure your best vision and lap time. Stilo ST5 GT Visor Part Number Chart: YA0854 ST5 Mirror dark visor YA0836 ST5 Iridium blue dark visor YA0837.2 ST5 Iridium red dark visor YA0838 ST5 Iridium yellow dark visor - Not FIA Certified High quality, Anti-fog visors shaped for the Stilo ST5 GT helmets. The Stilo ST5 series is unique in that the shield lock is located in the center position of the shield. The shield lock is released by squeezing the outboard sides together and that will then release it from the mount stud that is located in the center of the helmet. The reason for this is to "clean-up" the sides of the helmet where a side impact in a head containment seat may grab parts of the helmet. All Stilo ST5 shilds have the center release mechanism installed on it.All Stilo ST5 shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a micro fiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single pass works best. Repeat if necessary, but usually one pass works great.Stilo Visor Care: Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. This is the official Stilo Visor Cleaner.

Stilo Helmet Hydration Kit Upgrade your racing experience with the Stilo Hydration Kit, designed to keep you hydrated during intense competitions. Designed specifically for Stilo ST5 and ST6 helmets, this kit includes three essential components: the Bite Valve (YA0601), Silicone Tubing (YA0602), and Straight Male Coupling End (YA0603).1 Engineered to seamlessly integrate into the helmet and run behind the cheek pad, the quick-release connector allows for easy attachment to a variety of drink devices found on the market. Whether you're driving the ST5/ST6 FN or GT model, this hydration system ensures convenient access to refreshment without compromising performance. With the ability to fit snugly into the ST5/ST6 GT side ports or front vent of the ST5 FN helmet, this kit offers versatility and comfort. Stay focused on the track while staying hydrated with the Stilo Hydration Kit. Stilo Helmet Hydration Kit Includes (1) Male hydration connector (YA0603) (1) Hydration tube (YA0602) (1) Bite valve (YA0601) 1 Note: YA0604 female hydration connector is sold separately.

Stilo ST5 Short Sun Visor The Stilo short sun visor fit the Stilo ST5 (all versions composite, carbon, 8860 etc) and is designed to provide extra protection from the sun when a shield isn't necessary. The short visor can easily be adjusted up or down like a full visor for blocking the direct sun's rays. Using your same ST5 hardware that your shield is attached with, this Stilo ST5 short sun visor is a popular item in endurance closed cockpit racers. Not meant to be installed with shield still on the helmet. Sun visor works best as pictured by itself. Stilo ST5 Short Sun Visor Details: Manufacturer: Stilo Manufacturer part number: YA0816 Color: Black Eliminates the full visor for use in internal cockpits Fits the entire range of ST5 helmets Can be adjusted as angle of sunlight drops Sun visor only. Helmet not included.

Stilo ST5 Breath Deflector Anti-Fog Kit Fitting all ST5 helmets, the Stilo ST5 anti-fog breath deflector kit uses four special components to bring visor fog to a standstill. Your Stilo ST5 helmet - be it an ST5 Composite, Offshore, Carbon, Carbon 8860 or the DiscoveryParts favorite, the Carbon 8860 Zero - came to you with a special anti-fog coating on the visor. By combining the Stilo YA0873 anti-fog breath deflector kit with your specially coated Stilo shield, your best vision is ahead. The four components included in the Stilo YA0873 kit perfectly match your Stilo ST5 chin pad to stop air from coming in through the front air vents. The specially shaped front pad is attached to the inside of your chin pad with a little "lip" of extra material to go between your upper lip and nose. This fire resistant fabric flap with the three vent plugs are a perfect addition to our Stilo accessory department. Stilo ST5 Breath Deflector Anti-Fog Kit Details: Manufacturer: Stilo Manufacturer part number: YA0873 Fits all Stilo ST5 helmets: Yes Fits Stilo ST4 Helmets: No

Stilo ST5 Side Air Adapter Hose Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This adapter hose allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet. MUST BE USED IN CONJUCTION WITH SIDE AIR KIT YA0653.        

Stilo ST5 Side Air Kit Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This side air kit allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet. MUST BE USED IN CONJUCTION WITH SIDE AIR ADAPTER HOSE YA0639.        

Stilo ST6 ABP Helmet Cheek Pads Replacement cheek pads for Stilo ST6 ABP helmets help you customize your helmet to provide the perfect fit! These are only for ABP versions of the Stilo ST6 helmet.  If you have a non-ABP Stilo ST6 helmet, please order this version for non-ABP helmets.  We will not accept returns on these items.

BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet   Kit consist of:1 Pcs FORCED LOW PROFILE NOZZLE (Clear)1 Pcs COVER PLATE2 Sets* SEAL KIT *Each SEAL KIT set contains 2 pieces of 20 x 80mm and 2 pieces of 20 x 120mm.

Stilo ST6 FN ABP Helmet Shield Compatible only with Stilo ST6 FN FIA 8860-2018 and FIA 8859-2024 ABP helmets. Stilo offers a wide variety of shield colors and tint options, covering all racing conditions, for the Stilo ST6 FN FIA 8860-2018 ABP and FIA 8859-2024 helmets. These shields are made to fit your Stilo ST6 FN ABP helmet perfectly. Since 2019, the most stringent FIA 8860-2018 ABP (Advanced Ballistic Protection) helmet standard has been in effect for Formula 1. This latest standard builds frontal penetration protection into the helmet shell. The New FIA standard drove Stilo engineers to design and develop the Stilo ST6 FN helmet, along with this new shield design. While looking very similar to the standard Stilo ST6 shield, there is a slight shape difference and overall height difference. Stilo ST6 FN FIA 8860-2018 ABP FIA 8859-2024 Helmet Shield Details: Manufacturer: Stilo Qty in kit: one (1) shield Shield stocking bag included Fits Stilo ST5 FN FIA8860-2018 ABP and 8859-2024helmets Does not fit any other Stilo helmets ABP is an acronym for "Advanced Ballistic Protection" in the latest FIA standard