Auto Racing Helmet Accessories

HJC AR-10 III and HX-10 III Replacement Shields Polycarbonate injection molded construction for superior visibility and durability. Hard coated anti-fog interior. Pre-installed tear off posts. Available in Dark Blue, Chrome, Amber, Dark Smoke, and Clear. Genuine HJC Helmet Shields and Parts bring new life to your HJC auto racing helmet. HJC shields in different tints keep you ahead of the pack in every racing condition.

Bell SRV-8 Helmet Shields (Fits M.8) The Bell SRV-8 is a 3mm injection-molded, optically correct polycarbonate face shield. The SRV-8 3mm shield uses the SRV-1 pivot kit (not included), is compatible with tear offs, and is available in a variety of tint colors and mirror finishes. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) BELL SRV-8 HELMET SHIELD TINT COLORS: Light Smoke Dark Smoke Amber Silver Mirror Blue Mirror Gold Mirror Clear

Bell 287 SRV Helmet Shields (Fits K1 Pro, K1 Sport, GP.2 Youth)   Bell's 3mm injection molded optically correct polycarbonate face shield. The 287 SRV 3mm shield uses the SRV-1 pivot kit, is compatible with tear offs and is available in a variety of colors. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. BELL 287 HELMET SHIELD TINT COLORS: Clear Light Smoke Dark Smoke Amber Silver Mirror Blue Mirror Gold Mirror

Hans Device Padding Set - Foam Hans Replacement Foam Padding Set is a racer's favorite. Make your Hans more comfortable and look new again with Hans Foam Padding. The Hans Device Replacement Padding Set For HANS Devices Includes Two Shoulder Pads. Soft foam may address comfort concerns, especially from those with a ridge where a broken collar bone has healed. Fits medium and large devices only. These are factory installed on all Hans adult devices. Hans Foam Padding Set Details: Manufacturer: Hans Manufacturer part numbers: K9005, K9007, K9024, K9008 Colors: Black, Blue, Red, Yellow Fitment: All Hans devices in Medium & Large Sizes Fits Youth devices: No

Stilo Helmet Aero Kits These aero kits from Stilo provide all the downforce needed for open-cockpit drivers to reduce helmet lift. They are especially popular for IndyCar, Formula Atlantic, and Radical drivers. Choose between rear aero, front IndyCar kit, or both!      

Shock Doctor Eject Device The Eject helmet removal system will remove your helmet without risk of secondary injuries. Required by IMSA, SRO, NASCAR and many other series, the Eject helmet kit is simple and functional.Eject Helmet Removal Kit Details: Manufacturer: Eject Manufacturer part number: 2080051 Manufacturer alternate part number: 890-01-30I Choose "self Install" to have a new sealed kit sent to you or "we install" to have us install your new Eject for you. IMSA, SRO, NASCAR legal: Yes Eject® Helmet Removal System will remove your helmet without risk of secondary injuries. So simple and required in all higher levels of racing. Packaged singly to be used as a replacement system or for an Eject user with multiple helmets. Eject® Helmet Removal System is a small air bladder that fits easily into any helmet, without changing its fit or feel. In the event of a crash, First Responders can help reduce the risk of secondary neck or spine injuries by inflating the Eject System which gently lifts the helmet off a rider’s head. The most critical moment after a crash is removing the helmet. The EJECT Helmet Removal System is designed to aid in a safer helmet removal by inflating an airbag within the helmet. Once the airbag is inflated the helmet lifts off without causing further injuries to the driver. Note: As of 13 January 2021, IMSA requires the use of either the Eject Helmet Removal Kit or the Stand 21 Lid Lifter Balaclava (per IMSA rulebook section 21.1.2).

Bell Victory R1 Helmet Bag Bell high-end Victory R1 helmet bag protects your investment while incorporating updated styling elements based on Bell original all leather helmet bag. The bag features and external pocket for storage of helmet accessory kits. BELL VICTORY R1 HELMET BAG SPECS: Length: 15 in. Width: 13.5 in. Height: 13 in.

Schuberth SP1 Top Vent Scoop Clear top vent scoop directs cooler air into the Schuberth SP1 Carbon's top vents. Choose standard or flat style.

Stilo ST5 Side Air Kit Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This side air kit allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet. MUST BE USED IN CONJUCTION WITH SIDE AIR ADAPTER HOSE YA0639.        

Stilo ST5 Helmet Hydration Kit Hydration bite-valve kit designed specifically for the Stilo GT helmets. STILO HYDRATION KIT INCLUDES (1) Male hydration connector (1) Female hydration connector (1) Hydration tube (1) Bite valve

Stilo ST5 Side Air Adapter Hose Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This adapter hose allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet. MUST BE USED IN CONJUCTION WITH SIDE AIR KIT YA0653.        

Stilo ST5 Thick 4mil Perimeter Seal Tearoff Pack qty 9 (3 Sleeves of 3) Protect Your Stilo ST5 Helmet Shield from rocks, dirt, and debris with these 4 mil thick tearoffs. Measuring 4 mil thickness (the most popular thickness for open cockpit and harsh environment racers), it is intended for road racing and/or dirt track use. The perimeter seal system used in these tearoffs provides a tighter fit against the visor, blocking out dirt, dust, and water from getting between the visor and tearoff stack. This package of 4 mil tear-offs are in 3 stacks of 3 per package (9 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo 4 mil Perimeter Seal Tearoff Pack Quantity 9 (3 Sleeves of 3) Details: Manufacturer: Stilo Manufacturer part numbers: 3459CP Thickness each: 4 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 3 Stacks of 3 each Note: This is the thicker of tearoffs (4 mil) for your Stilo ST5 series helmets. It is used primarily in Road Racing Open Cockpit or other harsh environment race tracks

Stilo ST5 Thin 2mil Perimeter Seal Tearoff Pack qty 30 (3 Sleeves of 10) Protect Your Stilo ST5 Helmet Shield From Rocks, Dirt, and Debris with these 2 mil thick tearoffs. Measuring 2 mil thickness (the most popular thickness for dirt track racers), it is intended for road racing and/or dirt track use. The perimeter seal system used in these tearoffs provides a tighter fit against the visor, blocking out dirt, dust, and water from getting between the visor and tearoff stack. This package of 2 mil tear-offs are in 3 stacks of 10 per package (30 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo ST5 2mm Perimeter Seal Tearoff Pack Quantity 30 (3 Sleeves of 10) Details: Manufacturer: Stilo Manufacturer part numbers:10259CP Thickness each: 2 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 3 Stacks of 10 tear-offs glued together Note: This is the thinner of tearoffs (2 mil) for your Stilo ST5 series helmets. It is used primarily in Dirt Track Racing where you need more pulls in a race

Racing Optics (X-Stack) - 2 mil Perimeter Seal Laminated Tearoffs XStack™ 10 (Clear) The Perimeter Seal system is the latest technology from Racing Optics which allows for a tighter seal to visor, blocking out dirt, dust and water from behind the stack.  The XStack™ is a stack of 10 laminated Tearoffs that are 2 mil thick each. The laminated technology creates a distortion-free optical lens. Each package contains 3 stacks of 10 Tearoffs for a total of 30 Tearoffs. Clear. Fits: (Bell: BR8, Dominator.2, GTX.2, GP.2, GP.2 Youth, M.8, 287 Shield) / (Zamp: FS-2, Z-15 Shield, Z-20 Shield, Z-70, FS1.2 RZ) / (RJS) / (G-Force: Revo, Rift, Rookie)

Stilo ST5 Thin 2mil Tearoff Pack qty 30 (3 Sleeves of 10) Protect Your Stilo ST5 Helmet Shield From Rocks, Dirt, and Debris with these 2 mil thick tearoffs. Measuring 2 mil thickness (the most popular thickness for dirt track racers), it is intended for road racing and/or dirt track use. This package of 2 mil tear-offs are in 3 stacks of 10 per package (30 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo ST5 2mm Tearoff Pack Quantity 30 (3 Sleeves of 10) Details: Manufacturer: Stilo Manufacturer part numbers:10259C Thickness each: 2 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 3 Stacks of 10 tear-offs glued together Note: This is the thinner of tearoffs (2 mil) for your Stilo ST5 series helmets. It is used primarily in Dirt Track Racing where you need more pulls in a race

Stilo ST5 Thick 4mil Tearoff Pack qty 12 (4 Sleeves of 3) Protect Your Stilo ST5 Helmet Shield from rocks, dirt, and debris with these 4 mil thick tearoffs. Measuring 4 mil thickness (the most popular thickness for open cockpit and harsh environment racers), it is intended for road racing and/or dirt track use. This package of 4 mil tear-offs are in 4 stacks of 3 per package (12 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo 4 mil Tearoff Pack Quantity 10 (4 Sleeves of 3) Details: Manufacturer: Stilo Manufacturer part numbers: 3459C Thickness each: 4 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 4 Stacks of 3 each Note: This is the thicker of tearoffs (4 mil) for your Stilo ST5 series helmets. It is used primarily in Road Racing Open Cockpit or other harsh environment race tracks