Auto Racing Helmets

    Arai 8860-2018 ABP Carbon Fiber Helmet The new ARAI GP-7SRC ABP is a stunning example of Arai vision and technological mastery, engineered into a functional, real-world piece of safety equipment. It begins with a startling advancement: a proprietary Carbon Fiber (CF) weave that combines CF existing benefits of high strength and extreme light weight. But there's a major added benefit that standard CF does not possess: flexibility. (Standard CF tends to splinter or shatter instead of flex on impact.) The result is a helmet ready for the unparalleled demands and requirements of high end closed-cockpit racing. The remaining list of ARAI GP-7SRC features and advances is impressive because, for this helmet and its prospective user, it simply has to be. The ARAI GP-7SRC ABP meets or exceeds the FIA 8860-2018 ABP homologation standard. ARAI GP-7SRC ABP 8860-2018 CARBON FIBER HELMET - ABP (ADVANCED BALLISTIC PROTECTION) FIA's new ABP (Advanced Ballistic Protection) specification is intended especially for drivers in open cars. The ARAI GP-7SRC ABP has been strengthened in the forehead area, incorporating an external intrusion panel (previously mounted to the shield) that is now integrated into the helmet shell itself. The ABP homologation was written to reduce the risk of injury from debris or other objects striking a driver head. ARAI GP-7SRC ABP 8860-2018 CARBON FIBER HELMET - VENTILATION Three large, closeable, intake vents combined with larger 10mm holes and two aditional exhaust vents in the center of the helmet greatly increase air flow. A redesigned exhaust cowling improves aerodynamics, drawing out hot air escaping the helmet. The GP-7SRC comes with all vents unattached so you can customize the vent configuration to your specific needs. ARAI GP-7SRC ABP 8860-2018 CARBON FIBER HELMET - POSITIVE SHIELD LATCH Arai's positive latch mechanism provides solid shield closure while allowing normal operation of the shield. Designed as an integral component of the shield system, not just an add-on afterthought, its functional simplicity belies the complexity of the design. ARAI GP-7SRC ABP 8860-2018 CARBON FIBER HELMET - HANS POST ANCHORS Integrated seats accommodate a variety of Head and Neck Restraint devices. Pre-installed M6 threaded washer/nut with 6mm threads accepts a variety of anchor systems, making installation easy. The flat surface around the mounting nut allows the anchor post to rest flush on the helmet surface. ARAI GP-7SRC ABP 8860-2018 CARBON FIBER HELMET - SHELL Arai's proprietary carbon fiber material and weave provide an extremely strong yet flexible material, helping manage impact energy. Multiple reinforcing materials are used to improve performance while keeping weight and bulk to a minimum. ARAI GP-7SRC ABP 8860-2018 CARBON FIBER HELMET - EJECT READY CROWN PAD Pre-cut pocket under the crown pad can be easily removed to accommodate the optional eject system. ARAI GP-7SRC ABP 8860-2018 CARBON FIBER HELMET - DRINK TUBE COMPATIBILITY The ARAI GP-7SRC chin liner is now more easily removed to install a drink tube into the liner. The chin liner comes standard with four different drink hose placements.  Be sure to include a DP Evo helmet bag with your order to protect your new Stilo WRC Venti Zero Carbon Fiber Helmet ARAI GP-7SRC ABP 8860-2018 CARBON FIBER HELMET - GET THE BEST FIT Available in sizes Extra-Small to Large An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It's a good idea to take several measurements to make sure you have the largest one.     The ARAI GP-7SRC ABP will ship to you with signature required for delivery.

Arai GP-7SRC 8860-2018 Carbon Fiber Helmet   The new ARAI GP-7SRC is a stunning example of Arai vision and technological mastery, engineered into a functional, real-world piece of safety equipment. It begins with a startling advancement: a proprietary carbon fiber weave that combines its existing properties of high strength and extreme light weight. ThE ARAI proprietary carbon fiber has a property that standard carbon fiber does not possess: flexibility. (Standard carbon fiber tends to splinter or shatter instead of flex on impact.) The result is a helmet ready for the unparalleled demands and requirements of high end closed-cockpit racing. The remaining list of ARAI GP-7SRC features and advances is impressive because, for this helmet and its prospective user, it simply has to be. The ARAI GP-7SRC meets or exceeds the latest FIA 8860-2018 homologation standards. Fits Intermediate-Oval head shapes. ARAI GP-7SRC HELMET VENTILATION Large, closable intake vents combined with a 10mm vent greatly increase air intake. Larger 10mm rear vent hole increases air flow further compared to previous models. ARAI GP-7SRC HELMET POSITIVE SHIELD LATCH Positive latch mechanism provides solid shield latching while allowing normal operation of the shield. Designed to be an integral component of the shield system, not just an add-on afterthought. Simplicity of the function belies the complexity of the design. HANS POST ANCHORS Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-installed M6 threaded washer/nut with 6mm threads accepst a variety of anchor systems, making installation much easier. Flat surface area around the mounting nut allows the anchor post base to rest flush with the helmet surface. ARAI GP-7SRC HELMET SHELL Proprietary carbon fiber material and weave provide an extremely strong yet flexible material, helping manage impact energy. Multiple reinforcing materials are used to improve performance and keep weight and size to a minimum. EJECT READY CROWN PAD Pre-cut pocket under the crown pad can be easily removed to accommodate the optional eject system. ARAI GP-7SRC HELMET DRINK TUBE COMPATIBILITY The ARAI GP-7SRC chin liner is now more easily removed to install a drink tube into the liner. The chin liner comes standard with four different drink hose placements.   GET THE BEST FIT OF YOUR NEW ARAI GP-7SRC HELMET The GP-7SRC 8860-2018 is available in sizes Extra Small to Large An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one.   The ARAI GP-7SRC helmet will ship to you with signature required for delivery.

Arai GP-6RC 8860-2010  The GP-6RC is a stunning example of Arai’s vision and technological mastery engineered into a functional, real-world piece of safety equipment. It begins with a startling advancement: a proprietary Carbon Fiber (CF) weave that combines CF’s existing benefits of high strength and extreme light weight with a major added benefit that standard CF does not possess: flexibility. (Standard CF tends to splinter or shatter instead of flex on impact.) The result is a helmet ready for the unparalleled demands and requirements of Formula-1 racing. One whose remaining list of features and advances is impressive because, for this helmet and its prospective user, it simply has to be. The GP-6RC meets or exceeds the FIA 8860-2010 certification standard which is valid for 10 years from the date of manufacture.  These closeout helmets have manufacture dates of 2017-2019 so you will have a 8860 certified helmet that is still valid for 4-6 years.Notice: If you have the helmet painted, please do not remove the trims as this will void the FIA certification.   ARAI GP-6RC 8860-2010 CARBON FIBER AUTO RACING HELMET POSITIVE SHIELD LATCH Positive latch mechanism provides solid shield latching while allowing normal operation of the shield. Designed to be an integral component of the shield system, not just an add-on afterthought. Simplicity of the function belies the complexity of the design. ARAI GP-6RC 8860-2010 CARBON FIBER AUTO RACING HELMET HANS POST ANCHORS Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-installed M6 threaded washer/nut with 6mm threads accepst a variety of anchor systems, making installation much easier. Flat surface area around the mounting nut allows the anchor post base to rest flush with the helmet surface. ARAI GP-6RC 8860-2010 CARBON FIBER AUTO RACING HELMET SHELL Proprietary carbon fiber material and weave provide an extremely strong yet flexible material, helping manage impact energy. Multiple reinforcing materials are used to improve performance and keep weight and size to a minimum. ARAI GP-6RC 8860-2010 CARBON FIBER AUTO RACING HELMET EJECT READY CROWN PAD Pre-cut pocket under the crown pad can be easily removed to accommodate the optional eject system.   GET THE BEST FIT The GP-6RC 8860-2010 Clearance is available in sizes XS to Large. The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Arai GP-7 SA2020 Auto Racing Helmet Arai GP-7 SA2020 Helmet A driver favorite, the Arai GP-7 SA2020 helmet combines the most popular Arai features with new, improved upgrades. The GP-7 is constructed with Arai own PBcLc (Peripherally Belted Complex Laminate) shell construction and the same shell shape as the Formula 1 grade GP-7SRC model. New ventilation, a soft EPS liner, and a wider eye port for optimized peripheral vision are part of this new shell which gives the driver notable strength and flexibility. Replaceable cheek pads make racing comfortable for any driver, as do the three larger, closeable intake vents and two larger exhaust vents on the ventilation system. The ARAI GP-7 helmet is Snell SA2020 certified with factory-installed M6 washers/nuts. Drivers of any skill level can install their own Head and Neck Restraint system using a 6mm bolt. The FIA-8859-2015 certification sticker is applied to the interior liner of the helmet. POSITIVE SHIELD LATCH Simple yet effective, the positive latch mechanism on the GP-7 SA2020 helmet gives the driver solid shield latching, but is seamlessly integrated into the standard shield system for ease of use. NEW SHIELD PIVOT HARDWARE The GP-7 SA2020 features new shield pivot hardware with improved aerodynamics based on the updated track slider design. An increased peripheral field of view is featured on the 6 series, which surpasses the 5 series in visibility. The wider eye port, shield, and pivot hardware were all developed on the RC and adapted to the GP-7 SA2020 helmet. VENTILATION Increased airflow is key to the GP-7 SA2020 helmet design. This includes bigger, closeable intake vents with large 10mm holes in both front and rear. Larger rear vents also provide better airflow. M6 ANCHORS Drivers of all skill levels will appreciate the integrated, pre-installed M6 threaded washer/nut with 6mm threads which accepts a range of Head and Neck Restraint devices. A flat surface area around the mounting nut will let the anchor post base to rest flush along the surface of the helmet and around the full perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material. NEW CHINBAR The GP-7 SA2020 new, ergonomic chinbar and ridge at the bottom edge of the shell lowers the center of gravity and increases the structural integrity of the helmet. Additional improvements include a rise in the shell above the shoulders for increased clearance. EJECT READY CROWN PAD Arai's optional Eject system can be easily accommodated via a pre-cut pocket under the helmet crown pad. An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one. ThE ARAI GP-7 helmet will ship to you with signature required for delivery.

Arai Auto Racing GP-5W SA2020 Helmet The Arai Auto Racing GP-5W SA2020 Helmet is perfect for stock car, sedan, and rally drivers. The GP-5W Helmet is a favorite because of its wider, 90mm (approx 3.5 top to bottom) eye port opening. The GP-5W uses its own exclusive shield with this larger opening. The Arai GP-5W is Snell SA2020 certified with M6 washer/nuts installed at the factory. Drivers of any experience level will be able to easily install their Head and Neck Restraint system anchor posts (sold separately). The Arai Auto Racing GP-5W SA2020 also comes with the FIA-8859-2015 certification sticker found on the shell interior lining. SCLC CONSTRUCTION The GP-5W Helmet SA2020 is built with Arai's exclusive, very-lightweight SCLC (Super Complex Laminate Construction) shell technology. This ensures a low overall weight to balance the added weight of the helmet larger shield. ARAI GP-5W SHELL SHAPE The The Arai Auto Racing GP-5W Helmet SA2020 helps reduce fatigue for the driver due to its more natural head shape, smaller shell size, and lower center of gravity to assist with balance and stability. ARAI GP-5W INTERIOR FIT The The Arai Auto Racing GP-5W Helmet SA2020 is designed to closely match the shape of the human head, allowing for a snug, yet comfortable, fit. Arai has developed this natural shape over more than 50 years of helmet design research and refinement. ARAI GP-5W WIDER EYE PORT Sedan drivers will appreciate the larger, 90mm eye port, top to bottom. A visor peak is available for drivers not needing a shield on the The Arai Auto Racing GP-5W Helmet SA2020. REMOVABLE/REPLACEABLE CHEEK PADS Low-maintenance, easy-to-clean cheek pads are removable, washable, and replaceable with pads of varying thickness to provide a snug, safe fit. M6 ANCHORS The FIA-8859-2015 certified ARAI GP-5W Helmet SA2020 is pre-installed with the M6 threaded washer/nut with 6mm threads. This convenient feature allows the driver to use the anchor system that works with their Head and Neck Restraints the best. The anchor post is made to rest flush on the helmet surface due to a flat surface area around the mounting nut. Accepts a variety of anchor systems for Head and Neck Restraints. ARAI GP-5W VENTILATION Sedan car and closed cockpit drivers need greater airflow when racing. The upper ventilation system of the ARAI GP-5W SA2020 Helmet incorporates two exhaust vents and two large intake ducts to help keep the driver cool and comfortable. OPTIONS INCLUDE Anti- Fog Shields in Clear, Light Tint and Dark Smoke; Standard shields in Clear, Light Tint and Dark Smoke. An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one. The ARAI GP-5W helmet will ship to you with signature required for delivery.