Nomex Underwear

CHILLOUT PRO SPORT FIRE RESISTANT BALACLAVA   The CHILLOUT PRO SPORT underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track.  The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to eight degrees which will quicken your reflexes and reaction time on the track.  The Ultralight weight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track.  The Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body.  The Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint.  If you are serious about winning, then you need the Chillout Pro Sport underlayers in your gear bag.  FIA Homologation Standard: 8856-2018 SFI Homologation Specification: 3.3 Sizes: ONE SIZE Colors: BLACK, CHARCOAL, WHITE Composition: 42% M-Aramide, 42% Viscose FR, 16% EA PERFORMANCE CHILLOUT PRO SPORT UNDERLAYERS SIZING AND USAGE CHILLOUT PRO SPORT UNDERWEAR All users shall ensure that the Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Apendix L (Chaper III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles.  The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap.  The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. MAINTENANCE CHILLOUT PRO SPORT UNDERWEAR Chillout PRO SPORT Flame Resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care.  Drivers should replace any and all items as soon as they show signs of wear.  Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time.  Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. EMBROIDERY/LABELS CHILLOUT PRO SPORT UNDERLAYERS Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. CLEANING/MAINTENANCE CHILLOUT PRO SPORT UNDERLAYERS The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments.  EEC CERTIFICATION/GUARANTEE CHILLOUT PRO SPORT UNDERWEAR Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.  

CHILLOUT PRO SPORT Fire Resistant Shirt The CHILLOUT PRO SPORT underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track.  The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to eight degrees which will quicken your reflexes and reaction time on the track.  The Ultralight weight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track.  The Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body.  The Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint.  If you are serious about winning, then you need the Chillout Pro Sport underlayers in your gear bag.  FIA Homologation Standard: 8856-2018 SFI Homologation Specification: 3.3 Sizes: XS-XXL Colors: BLACK, CHARCOAL, WHITE Composition: 42% M-Aramide, 42% Viscose FR, 16% EA PERFORMANCE CHILLOUT PRO SPORT UNDERLAYER SHIRT SIZING AND USAGE CHILLOUT PRO SPORT UNDERWEAR All users shall ensure that the Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Apendix L (Chaper III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles.  The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap.  The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. MAINTENANCE CHILLOUT PRO SPORT UNDERWEAR Chillout PRO SPORT Flame Resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care.  Drivers should replace any and all items as soon as they show signs of wear.  Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time.  Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. EMBROIDERY/LABELS CHILLOUT PRO SPORT UNDERLAYER SHIRT TOP Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. CLEANING/MAINTENANCE CHILLOUT PRO SPORT UNDERLAYER SHIRT TOP The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments.  EEC CERTIFICATION/GUARANTEE CHILLOUT PRO SPORT SHIRT TOP Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.  

CHILLOUT PRO SPORT Fire Resistant Pants The CHILLOUT PRO SPORT underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track.  The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to eight degrees which will quicken your reflexes and reaction time on the track.  The Ultralight weight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track.  The Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body.  The Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint.  If you are serious about winning, then you need the Chillout Pro Sport underlayers in your gear bag.  FIA Homologation Standard: 8856-2018 SFI Homologation Specification: 3.3 Sizes: XS-XXL Colors: BLACK, CHARCOAL, WHITE Composition: 42% M-Aramide, 42% Viscose FR, 16% EA PERFORMANCE CHILLOUT PRO SPORT UNDERLAYER PANT BOTTOM SIZING AND USAGE CHILLOUT PRO SPORT UNDERWEAR All users shall ensure that the Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Apendix L (Chaper III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles.  The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap.  The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. MAINTENANCE CHILLOUT PRO SPORT UNDERWEAR Chillout PRO SPORT Flame Resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care.  Drivers should replace any and all items as soon as they show signs of wear.  Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time.  Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. EMBROIDERY/LABELS CHILLOUT PRO SPORT UNDERLAYER PANT BOTTOM Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. CLEANING/MAINTENANCE CHILLOUT PRO SPORT UNDERLAYER BOTTOM PANTS The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments.  EEC CERTIFICATION/GUARANTEE CHILLOUT PRO SPORT PANTS Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.  

CHILLOUT PRO SPORT FIRE RESISTANT SOCKS The CHILLOUT PRO SPORT underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track.  The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin termperature by up to eight degrees which will quicken your reflexes and reaction time on the track.  The Ultralight weight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track.  The Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body.  The Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint.  If you are serious about winning, then you need the Chillout Pro Sport underlayers in your gear bag.  FIA Homologation Standard: 8856-2018 SFI Homologation Specification: 3.3 Sizes: S / M / L Colors: BLACK, WHITE Composition:28% Aramide, 28% Viscose FR, 22% Modacrylic, 18% Cotton, 4% Elastane PERFORMANCE CHILLOUT PRO SPORT SOCKS SIZING AND USAGE CHILLOUT PRO SPORT SOCKS All users shall ensure that the Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Apendix L (Chaper III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles.  The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap.  The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. MAINTENANCE CHILLOUT PRO SPORT SOCKS Chillout PRO SPORT Flame Resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care.  Drivers should replace any and all items as soon as they show signs of wear.  Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time.  Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. EMBROIDERY/LABELS CHILLOUT PRO SPORT SOCKS Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. CLEANING/MAINTENANCE CHILLOUT PRO SPORT SOCKS The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments.  EEC CERTIFICATION/GUARANTEE CHILLOUT PRO SPORT SOCKS Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.  

Sparco RW-11 Seamless Nomex Fireproof Shirt   The Sparco RW-11 line of Nomex® undergarments is the lightest and most breathable on the market that is homologated to the new FIA 8856-2018 standard. When designing this new line of undergarments, Sparco studied the drivers seating position to ensure ultimate fit and comfort. The RW-11 features a fully seamless structure with ultra-soft stretchable material for a very comfortable fit. RW-11 shirts and underpants are treated with Sparco’s X-Cool treatment, which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool treatment has an anti-bacterial effect.    The RW-11 Undershirt is a seamless design with no seams for additional comfort. The undershirt is available in seven sizes: extra small to 3X Large. The RW-11 undershirt is a compression type fit, if you prefer a looser fit choose one size larger than you normally wear. Available in black or white SPARCO RW-11 NOMEW UNDERLAYER SHIRT TECHNOLOGY Newest FIA rating:  FIA 8856-2018 Seamless stretchable Nomex in key areas for mobility Designed for comfort in a driving position Minimal external seams increase driver comfort X Cool Silver draws heat from the body surface to cool the driver X Cool Silver has anti-bacterial effect

Sparco RW-10 Seamless Nomex Fireproof Shirt   The Sparco RW-10 line of Nomex® undergarments is the lightest and most breathable on the market that is homologated to the new FIA 8856-2018 standard. When designing this new line of undergarments, Sparco studied the drivers seating position to ensure ultimate fit and comfort. Now available in two new colors as well, the RW-10 features a fully seamless structure with ultra-soft stretchable material for a very comfortable fit. RW-10 shirts and underpants are treated with Sparco’s X-Cool treatment, which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool treatment has an anti-bacterial effect.    The RW-10 Undershirt is a seamless design with no seams for additional comfort. The undershirt is available in four sizes: X-Small, Small/Medium, Large/X-Large, XX-Large. The RW-10 undershirt is a compression type fit, if you prefer a looser fit choose one size larger than you normally wear.  SPARCO RW-10 UNDERLAYER TECHNOLOGY Newest FIA rating: FIA 8856-2018 Seamless stretchable Nomex in key areas for mobility Designed for comfort in a driving position Minimal external seams increase driver comfort X Cool Silver draws heat from the body surface to cool the driver X Cool Silver has anti-bacterial effect

Stand21 Porsche Motorsport Evo V3 Nomex Fireproof Shirt Officially-licensed Porsche Motorsport safety gearfrom Stand21 is now available at Discovery Parts. The Evo V3 nomex shirt combines top-tier technologies in fire resistance and comfort to create a lightweight, breatheable and comfortable shirt specifically for the Porsche Motorsport enthusiast. STAND21 PORSCHE MOTORSPORT EVO V3 FEATURES: FIA 8856-2018 homologated Porsche Motorsport logo on chest Aramid/viscose construction Soft and comfortable high collar

Sparco RW-11 Seamless Nomex Pants The Sparco RW-11 line of Nomex® undergarments is the lightest and most breathable on the market that is homologated to the new FIA 8856-2018 standard. When designing this new line of underlayers, Sparco studied the drivers seating position to ensure ultimate fit and comfort. The RW-11 features a fully seamless structure with ultra-soft stretchable material for a very comfortable fit.  RW-11 shirts and underpants are treated with Sparco’s X-Cool treatment, which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool treatment has an anti-bacterial effect.    The RW-11 pant is a seamless design with no seams for additional comfort. The pant is available in seven sizes: XS-3XL The RW-11 undershirt is a compression type fit, if you prefer a looser fit choose one size larger than you normally wear. Available in black or white. SPARCO RW-11 UNDERLAYER TECHNOLOGY Newest FIA rating - FIA 8856-2018 Seamless stretchable Nomex in key areas for mobility Designed for comfort in a driving position Minimal external seams increase driver comfort X Cool Silver draws heat from the body surface to cool the driver X Cool Silver has anti-bacterial effect

Sparco RW-10 Seamless Nomex Pants The Sparco RW-10 line of Nomex® undergarments is the lightest and most breathable on the market that is homologated to the new FIA 8856-2018 standard. When designing this new line of undergarments, Sparco studied the drivers seating position to ensure ultimate fit and comfort. The RW-10 features a fully seamless structure with ultra-soft stretchable material for a very comfortable fit. RW-10 underlayers are treated with Sparco’s X-Cool treatment, which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool treatment has an anti-bacterial effect.    The RW-10 pant is a seamless design with no seams for additional comfort. The underpant is available in four sizes: X-Small, Small/Medium, Large/X-Large, and XX-Large. The RW-10 underlayer is a compression type fit, if you prefer a looser fit choose one size larger than you normally wear. Available in black, white, and new blue, and gray as well. SPARCO RW-10 NOMEX UNDERLAYER PANTS TECHNOLOGY Newest FIA rating - FIA 8856-2018 Seamless stretchable Nomex in key areas for mobility Designed for comfort in a driving position Minimal external seams increase driver comfort X Cool Silver draws heat from the body surface to cool the driver X Cool Silver has anti-bacterial effect

OMP ONE Nomex Top FIA 8856-2018 HOMOLOGATED OMP One EVO premier long sleeved shirt with high neck for maximum protection made with a comfortable fire retardant seamless fabric. The high breathability fabric inserts "3D cube" on main perspiration areas ensures the best comfort and a perfect fitting (3D Dry System Technology). The special 3D inserts on the sides, back of the shoulders, small of the back, and inside the arms allow perspiration to evaporate without sacrificing flame protection. OMP ONE EVO shirts have an athletic cut with increased elasticity to fit smoothly under the driver's fire suit. As such, they are designed to fit a little bit tight. OMP ONE EVO UNDERLAYER TOP FEATURES: FIA 8856-2018 Homologation Available in Black or White XS/S (42-46) Med (48-50) Lrg (52-54) XL (56-58) XXL (60-64)   SKU IE0-0792-A01-020-XSS IE0-0792-A01-020-M IE0-0792-A01-020-L IE0-0792-A01-020-XLXXL IE0-0792-A01-071-XSS IE0-0792-A01-071-M IE0-0792-A01-071-L IE0-0792-A01-071-XLXXL

Sabelt UI-600 Nomex Shirt (Regular Fit) FIA 8856-2018 Certified The new UI-600 tech layers from Sabelt offer stretch-fit nearly seamless construction for the ultimate in breathability and comfort while racing. The composition of this new underwear line makes the clothing light, resistant and extremely comfortable. The use of Lenzing FR fiber, which is made of a natural raw material, and keeps the body dry and cool, together with the modacrylic and elasthane, which make the garments totally stretch, make this line the most convenient and the most Innovative across the range. The two way stretch warp knit seamless fabric has a high wear resistance and is very light.

Sabelt UI-600 Nomex Fireproof Shirt FIA 8856-2018 Certified The new UI-600 tech layers from Sabelt offer stretch-fit nearly seamless construction for the ultimate in breathability and comfort while racing. The composition of this new underwear line makes the clothing light, resistant and extremely comfortable. The use of Lenzing FR fiber, which is made of a natural raw material, and keeps the body dry and cool, together with the modacrylic and elasthane, which make the garments totally stretch, make this line the most convenient and the most Innovative across the range. The two way stretch warp knit seamless fabric has a high wear resistance and is very light.

Sparco Shield RW-9 Nomex Fireproof Shirt   The Shield RW-9 line of Nomex underwear provides the highest level of breathability, comfort and protection. When designing this line, Sparco studied the driver's sitting position to ensure ultimate fit and comfort. Shield RW-9 uses a seamless construction with ultra-soft stretchable material. There are two different woven materials in key areas; thin stretch Nomex for comfort and mobility as well as a double perforated Nomex for increased breathability and ultimate comfort. The minimal seams are stitched flat with thin specialized thread for added comfort. All Shield RW-9 pieces are treated with Sparco X-Cool Silver which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool Silver treatment has an anti-bacterial effect. The Shield RW-9 collection has pieces to fit every driver's style, including short-sleeved nomex t-shirts, long-sleeved nomex shirts, nomex pants, nomex balaclava, and nomex socks. SPARCO RW-9 NOMEX UNDERLAYER SHIRT FEATURES The Shield RW-9 line is SFI 3.3 homologated (except short-sleeve t-shirt) Seamless stretchable Nomex in key areas for mobility Perforated knit in key areas for breathability Designed for comfort in a driving position Minimal external seams increase driver comfort X-Cool Silver draws heat from the skin to cool the driver X-Cool Silver has anti-bacterial effect Available in white or black

Alpinestars ZX EVO v2 Fireproof Shirt Alpinestars ZX Series EVO v2 layers are constructed with Lenzing FR®, an innovative natural viscose fiber that affords exceptional flame resistance and protection against heat transfer. This Formula 1 specification underwear is extremely lightweight and thin, while being incredibly soft to the touch for greatly enhanced comfort when wearing a driving suit.  Available in the usual black and white plus three other exciting colors including our favorite white and blue!   ALPINESTARS TECH 1-ZX NOMEX UNDERLAYER TOP PROTECTION Certified to the new FIA 8856-2018 homologation standard. ALPINESTARS TECH 1-ZX NOMEX UNDERLAYER TOP CONSTRUCTION Stretchable construction under new homologation standard requirements Lightweight, seamless tubular construction for optimum comfort ALPINESTARS TECH 1-ZX NOMEX UNDERLAYER TOP KEY FEATURES Fabric composition with a high percentage of Lenzing FR® fiber for enhanced garment performance Jaquard motif with Alpinestars knee logo for a unique design

Sabelt underwear UI-600 Pants  (Regular Fit)  FIA 8856-2018 Certified The new UI-600 tech layers from Sabelt offer stretch-fit nearly seamless construction for the ultimate in breathability and comfort while racing. The composition of this new underwear line makes the clothing light, resistant and extremely comfortable. The use of Lenzing FR fiber, which is made of a natural raw material, and keeps the body dry and cool, together with the modacrylic and elasthane, which make the garments totally stretch, make this line the most convenient and the most Innovative across the range. The two way stretch warp knit seamless fabric has a high wear resistance and is very light.

Sparco RW-7 Nomex Fireproof Shirt   The RW-7 line of undergarments are designed to provide both comfort and protection. The RW-7 is made from a unique mixture of very comfortable soft fibers. The undershirts are made with seamless sides with raglan sleeves to enhance comfort.  The Sparco RW-7 line of underlayers includes long-sleeved shirts, long pants, a balaclava (hood) and mid-calve socks. The hoods are one size fits all; shirts and pants are available in a large range of sizes. The RW-7 shirts and pants are designed to fit close to the body due to the soft stretchable fabric. If you prefer a loose-fit please choose one size up. RW-7 shirts and pants are treated with Sparco’s X-Cool treatment, which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool treatment has an anti-bacterial effect. The RW-7 line is FIA 8856-2018 homologated.SPARCO RW-7 UNDERLAYER TECHNOLOGYNewest FIA rating - FIA 8856-2018Seamless stretchable Nomex in key areas for mobilityDesigned for comfort in a driving positionMinimal external seams increase driver comfort