Bell HP77 8860-2018 Carbon Fiber Helmet
Bell Bell HP77 8860-2018 Carbon Fiber Helmet $5,750.00
Bell HP77 8860-2018 Carbon Fiber Helmet The HP77, based on Bell highly successful F1 World Champion proven HP7 design, provides the latest impact protection by lowering the visor opening by 12 mm and reinforcing the front of the helmet with advanced ballistic protection. The HP77 is the most advanced FIA8860-2018 helmet in Bell product line and sets a new standard for a lightweight, aerodynamically superior carbon fiber helmet performance for the intense demands of open-wheel and open-cockpit forms of racing. The HP77 is homologated to the FIA8860-2018 ABP standard, the most rigorous sport helmet standard on the planet. The HP77 was designed for professional formula racers competing at the highest levels of the sport and for any other racing driver who treats safety as a paramount importance. FEATURES: Homologation: FIA8860-2018 ABP Visor opening lowered 12 mm for added ballistic protection from middle size debris High-strength and high modulus carbon fiber ultra-lightweight carbon shell Advanced multi-density, multi-piece liner for energy absorption and impact performance Optical grade injection molded Double Screen Anti-Fog (DSAF) visor Top and chin bar ventilation system with 12 air intake and extraction channels Air intake system includes two-part center and side air intakes Shell and shield design optimized to improve aerodynamic performance Integrated channels for drink tube and radio systems Top spoiler, top and chin bar gurneys available separately Factory installed HANS anchors Available front chinbar hole for drink tube HP helmet bag included Color: Carbon, Matte Finish Sizes: 54 to 59+ All sizes shown in centimeters Shield and pivot kit: SE77 shield , SV(SE07) pivot kit Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order - additional charges will apply). Grey is standard
Bell HP7 8860 Carbon Fiber Helmet
Bell Bell HP7 8860 Carbon Fiber Helmet $3,999.95
Bell HP7 Carbon Fiber FIA 8860-218 Helmet The FIA 8860 homologated Carbon Fiber HP7 has been developed in a close collaboration with leading F1 drivers and teams to create an aerodynamically sleek, ultra-lightweight and efficient racing helmet suited to the intense demands of open-wheel, open-cockpit racing that compete at higher speeds. Designed for professional racers, the 8860 (or super helmet ) standard was developed by the FIA to improve overall helmet performance and protection; it's the most stringent racing helmet standard in the world. The HP7 is available in two versions: with or without a "duckbill" chin spoiler, which provides enhanced aerodynamic stability in high-speed, open-cockpit environments. FEATURES: Snell SA2015 and FIA8860-2010 homologations. HP7 absorbs up to 40% more energy than standard models on certain impacts. Ultra-lightweight shell made using aerospace-grade carbon. Innovative shield design improves acoustic comfort, aerodynamic performance and energy absorption. Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection. Kevlar-reinforced liner adds protection. Multi-density comfort foams and padding ensure excellent fit. 14 air intake and extraction channels, dual-chamber intake maximizes airflow around the head and face. Titanium hardware and optical-grade injected Double-Screen Anti Fog (DSAF) shield. Hollow synthetic rubber gasket seal keeps water, dust, and debris out. Removable chin guard and various-thickness padding accommodates different cheek and jaw shapes. Integrated channels offer multiple options to install integrated drinking tube and radio microphone systems. Aerodynamic accessories including chin bar, top Gurneys and rear spoiler (sold separately). Top-air configuration with eyeport, eight- and ten-hole airflow options (sold separately). Ultra-plush grey Comfort-Max FR¬ improves comfort and moisture wicking. Velcro cheek pads, recessed ear area in liner allow integration of ear cups. Narrow eyeport. SE07 3MM DSAF clear shield (SV SE07 pivot system). Zylon-reinforced visor panel available (sold separately, must be factory installed). Complete with HANS anchors and hex wrench. This helmet will ship to you with signature required for delivery.
Bell HP6 8860-2018 Carbon Fiber Helmet
Bell Bell HP6 8860-2018 Carbon Fiber Helmet $2,399.95
Bell HP6 8860-2018 Carbon Fiber Helmet Incorporating technology used in our state-of-the-art HP7 Advanced Helmets, the HP6, with its modern and aggressive design, has been developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an ultra-lightweight Advanced carbon shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. It can be fitted with optional earcups providing optimal noise insulation, with fully integrated radio communication kit and hydration systems (available separately or in RD version). FEATURES Ultra-lightweight FIA8860-2018 Advanced full carbon shell Wide eyeport opening for optimal vision in closed cockpit cars Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Integrated channels in face piece offering multiple options to install drinking tube, valves, and radio systems Extraction vents to maximize cooling and air circulation Factory installed Hans anchors as original equipment Optional Top forced air intake can be installed on the left or right top side vents - available for use with and external cooling system Forced air kits available for aftermarket including Quick Lock (V10) and are fully compatible with Maglock Optional earcups for increased noise insulation HP helmet bag included Interior: Dark Grey High Strength High Comfort FR Fabric Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order) Color: Carbon, Matte Finish Homologation: FIA8860-2018 Sizes: 6 3/4 (54) to 7 5/8+ (61+) IN THE BOX HP6 Clear SE06 3mm DSAF Shield Installed HP Helmet Bag Plastic Tearoff Posts Installed Hex Wrench Key
Bell RS7C LTWT Carbon Fiber Helmet SA2020
Bell Bell RS7C LTWT Carbon Fiber Helmet SA2020 $1,999.95
Bell RS7C LTWT Carbon Fiber Helmet SA2020 Based on the HP7 design and featuring a lightweight carbon composite shell using Bell high-pressure proprietary molding system, the RS7 LTWT Carbon uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance, and energy absorbing capabilities. The Double Screen Anti-Fog (DSAF) shield and rubber gasket seal ensure air, water, and dust will not enter the eyeport. FEATURES Aerospace-grade, ultra-lightweight carbon fiber shell. Snell SA2020 approved. Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance. Multi-purpose fit system that can be used with or without included ear cups. Optical grade injection molded Double Screen Anti-Fog (DSAF) visor. Top and chin bar ventilation system with 14 air intake and extraction channels. Interior ventilation channels enhanced to maximize airflow. Shell and shield design optimized to improve aerodynamic performance. Integrated channels in face piece offer multiple options to install drink tube and radio systems. Top spoiler, top and chin bar gurneys available separately. Top air attachments available separately. Factory installed HANS anchors. Synthetic rubber gasket seal to prevent dirt and water from entering the helmet. Shield and pivot kit: SE07, SV(SE07). Color: Carbon Matte Clear. Sizes: 7 1/8- (57-) to 7 5/8+ (61+). All sizes shown in centimeters.
Bell RS7 Carbon Fiber Helmet SA2020
Bell Bell RS7 Carbon Fiber Helmet SA2020 $1,499.95
Bell RS7 Carbon Fiber Helmet SA2020 The Bell RS7 Carbon Fiber SA2020 helmet features Bell high-pressure, proprietary molding system based on the innovative HP7 design. This ultra-lightweight carbon shell is designed for optimum acoustic comfort, energy absorbing capability, and gives the Bell RS7 Carbon Fiber SA2020 helmet ideal aerodynamic performance. Top forced air inserts improve internal ventilation while the hollow synthetic rubber gasket seal ensures that air, water, and dust won t enter the helmet in outdoor environments. The Bell RS7 Carbon Fiber SA2020 helmet advanced ventilation system features 14 intake and extraction channels with air intake covers in a refined aero design for the most discerning racers. FEATURES: Snell SA2020 and FIA 8859-2015 homologation. Includes clear SE07 3MM DSAF shield (SV SE07 pivot system) and DSAF anti-fog insert. Ultra-lightweight carbon fiber shell, high-pressure molding system improves shell strength. 14 intake and exhaust channels provide amazing ventilation. Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection. Improve high-speed aerodynamic stability with optional chin bar and top Gurneys and rear spoiler (sold separately). Top forced-air inserts including eyeport, eight-hole and ten-hole options when used with forced air system (sold separately). Integrated channels for optional integrated drinking tube and radio microphone systems. Ultra-plush grey Comfort-Max FR¬ interior fabric provides superior moisture wicking. Pro-style, multi-density foam interior with contoured cheek pads for professional fit. Narrow eye port. M6 terminal hardware and hex wrench for Head and Neck Restraint anchors. This helmet will ship to you with signature required for delivery.
Bell GT6 Carbon Fiber Helmet SA2020
Bell Bell GT6 Carbon Fiber Helmet SA2020 $1,249.95
Bell GT6 Carbon Fiber Helmet SA2020 Derived from HP6, the GT6 CARBON features the same modern and aggressive design, developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an ultra-lightweight Premium carbon shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. It can be fitted with optional earcups providing optimal noise insulation, with fully integrated radio communication kit and hydration systems (available separately or in RD version). FEATURES Ultra-lightweight Premium Carbon Composite shell Wide eyeport opening for optimal vision in closed cockpit cars Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Integrated channels in face piece offering multiple options to install drinking tube, valves, and radio systems Extraction vents to maximize cooling and air circulation Factory installed Hans anchors as original equipment Optional Top and Side air intakes available for use with external cooling system Optional earcups for increased noise insulation Interior: Dark Grey High Strength High Comfort FR Fabric Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order) Color: Carbon, Gloss Finish Homologation: FIA8859-2015 & Snell SA2020 Sizes: 6 3/4 (54) to 7 5/8+ (61+) IN THE BOX GT6 Carbon Clear SE06 3mm DSAF Shield Installed Drawstring Helmet Bag Plastic Tearoff Posts Installed Hex Wrench Key
Sold out
Bell BR8 Carbon Fiber Helmet SA2020
Bell Bell BR8 Carbon Fiber Helmet SA2020 $1,199.95
Bell BR8 Carbon Fiber Helmet SA2020 Designed for off-road and dirt forms of racing, the versatile and ultra-lightweight BR8 Carbon can be used in multiple configurations including standard, left or right side forced air, left or right 3/4 top forced air, or top forced air. Utilizing an innovative kit system (included with the helmet), racers can customize the BR8 Carbon to adapt to different forms of racing and seat configurations providing the ultimate flexibility in one model. The BR8 Carbon features an aerodynamic front duckbill, Double Screen Anti-Fog (DSAF) insert to create a positive visor seal and prevent shield fogging, and rear-facing Venturi airflow vents that prevent dust from entering the helmet while still allowing forced air to be introduced into the helmet. The BR8 Carbon features a unique air chamber system that evenly distributes airflow around the head regardless of the top air configuration used. The helmet can be used with or without ear cups. FEATURES Lighweight Carbon Shell FIA 8859-2015 and Snell SA2020 approved Integrated channels in face piece offer multiple options to install drink tube and radio system Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance. Multi-purpose fit system that can be used with or without included ear cups. Includes front duckbill to enhance aerodynamic performance Interior ventilation channels enhanced to maximize airflow Can be converted to left or ride side air, 3/4 left or right top air, or top air by using a versatile kit system (included) with forced air nozzle and cover plates Integrated channels in face piece offer multiple options to install drink tube and radio systems. Comes with standard rear-facing vents that create a Venturi effect allowing air to exchange and circulate in the helmet while preventing dust and dirt from entering Interior: Dark grey high strength and high comfort fire resistant fabric Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Shield and pivot kit: SRV-8 Color: Carbon Gloss Clear Sizes: 7 1/8- (57-) to 7 5/8+ (61+) All sizes shown in centimeters
Bell GP.3 Carbon Fiber Helmet SA2020
Bell Bell GP.3 Carbon Fiber Helmet SA2020 $1,199.95
Bell GP.3 Carbon Fiber Helmet SA2020 The Bell GP.3 Carbon Fiber Helmet SA2020 is ideal for open-environment racers who need maximum ventilation and clear vision in complex racing environments. This helmet has traditional F1 styling, an ultra-lightweight Carbon shell, and a dynamic air intake system for cutting-edge aerodynamic performance. The Bell GP.3 Carbon Fiber Helmet SA2020 is a top pick for formula, kart, and all types of open wheel racers who value comfort, performance, and professional-level features. This helmet now has improved shield integration, a rubber gasket seal, manual lever closable air vents, and a double-screen, anti-fog (DSAF) visor to accommodate any tough race in the elements. FEATURES: Snell SA2020 and FIA 8859-2015 homologation. Includes clear SE03 3MM DSAF shield (SV SE03/05 Pivot System) with DSAF anti-fog insert. Ultra-lightweight carbon shell with improved shell strength from high-pressure molding. Direct-flow chin vents and manual air intakes provide exceptional ventilation. Chin bar Gurney (duckbill) improves aerodynamic performance. Ambient noise reduction options with ear cup configuration. Hollow synthetic rubber gasket seals out water, dust, and dirt. Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection. Integrated drinking tube systems and integrated channels for optional radio microphone systems. Ultra-plush grey Comfort-Max FR¬ interior fabric improves moisture wicking. Contoured cheek pads for professional fit. Includes M6 HANS-device hardware and hex wrench. This helmet will ship to you with signature required for delivery.
Bell GTX.3 Carbon Fiber Helmet SA2020
Bell Bell GTX.3 Carbon Fiber Helmet SA2020 $1,199.95
Bell Racing Helmets GTX.3 Carbon Helmet SA2020 The sleek, aerodynamic Bell Racing Helmets GTX.3 Carbon Helmet SA2020 features an ultra-lightweight carbon fiber shell, a front chin-bar gurney and an integrated rear wing to provide the open-cockpit driver with improved aerodynamic performance and high-speed stability. The Bell Racing Helmets GTX.3 Carbon is ideal for use in dusty, open-wheel environments with its integrated shield, double screen anti fog (DSAF) visor, rubber gasket seal, and rear-facing vents to help with air exchange and provide clear vision while racing in the elements. This stylish helmet carries Snell SA2020 approval, FIA 8859-2015 Homologation, and comes with M6 terminal hardware for your Head and Neck Restraint (HANS) device. These safety and comfort features make the Bell Racing Helmets GTX.3 Carbon Helmet SA2020 is ideal for dirt track, karting, open-wheel, formula, and all types of open-compartment racing where clean, distraction-free airflow is essential for competition. FEATURES Snell SA2020 and FIA 8859-2015 homologations. SE03 3mm DSAF clear shield (SV SE03/05 pivot system). Ultra-lightweight carbon fiber construction with improved shell strength from high-pressure molding system. Drive confidently with sleek aerodynamic styling with integrated wing. Venturi airflow system allows air exchange while preventing dust and dirt from entering the helmet. Chin bar Gurney (duckbill) improves aerodynamic performance. Hollow synthetic rubber gasket seal keeps out dust, dirt, and water. Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection. Install integrated drinking tube systems and radio microphone systems (sold separately) with integrated channels in the face piece. Ultra-plush grey Comfort-Max FR¬ interior improves comfort and moisture wicking. Pro-style, multi -foam density interior with contoured cheek pads for professional fit. Standard-size eye port. Double Screen Anti-Fog (DSAF) visor insert for improved anti-fog performance. M6 terminal hardware and hex wrench for Head and Neck Restraint devices All sizes shown in centimeters This helmet will ship to you with signature required for delivery.
Sold out
Bell KC7 CMR Carbon Fiber Karting Helmet
Bell Bell KC7 CMR Carbon Fiber Karting Helmet $1,159.95
ULTRA-LIGHT CARBON FIBER KARTING HELMET Bell Racing is proud to introduce the KC7 CMR Carbon, the first ultra-lightweight carbon fiber youth karting helmet on the market. Based on the HP7 Formula 1 helmet, this sleek, aerodynamic design features an advanced ventilation system with 14 air intake and extraction channels designed to maximize cooling and a double screen anti-fog (DSAF) insert to prevent fogging in rainy conditions. Certified to the FIA/ Snell CMR standard designed for karting drivers under the age of 18, the KC7 CMR Carbon is a winning choice for the next generation of champion drivers. Ultra-Lightweight Carbon Fiber Shell: 2.6 lbs. (sizes 52-56) or 2.7 lbs. (sizes 57-59) Innovative shell and shield design improve acoustic Comfort, Aerodynamic Performance and Energy Absorption Design based on the innovative HP7 used in F1 Advanced Ventilation System with 14 Intake and Extraction Channels Front and Side Air Intakes Available (Sold Separately) Hollow Synthetic Rubber Gasket Seal Ensuring that Air, Water and Dust Can t Penetrate into the Helmet Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High Velocity Impact Protection Aerodynamic Accessories including Chin Bar and Top Gurneys and Rear Spoiler (Sold Separately) for Improved Aero Performance and Stability at High Speeds Pro-Style, Multi Foam Density Interior with Superior Moisture Wicking Properties Comfort-Plus Karting Style Interior with Removable / Replaceable Cheek Pads SE07 2MM DSAF Shield (SV SE07 Pivot System) Clear Shield Double Screen Anti-Fog (DSAF) Visor Insert For Improved Anti-Fog Performance Draw String Helmet Bag Included Hex Wrench Included FIA/Snell CMR2016 Homologation This helmet will ship to you with signature required for delivery.
Bell M.8 Carbon Fiber Helmet SA2020
Bell Bell M.8 Carbon Fiber Helmet SA2020 $1,099.95
Bell M.8 Carbon Fiber Helmet SA2020 The Bell M.8 Carbon Fiber SA2020 is designed with comfort in mind while keeping with traditional Bell M style. Its large eye port opening and adjustable forehead vents to reduce potential fogging are designed for the driver who wears sunglasses or eyeglasses. The Bell M.8 Carbon Fiber SA2020 is available in seven sizes, from XS to XL+, providing a near-custom fit with a wide spectrum of sizes. The helmet is certified for use with HANS devices with integrated M6 female threaded inserts for HANS post anchors, which are sold separately. The Bell M.8 Carbon Fiber SA2020 includes a clear face shield and black visor strip, shield hardware with a hex wrench, and a drawstring helmet bag to keep it all together. Snell SA2020 and FIA 8859-2015 approved. FEATURES: Snell SA2020 and FIA 8859-2015 homologated. Carbon fiber shell is ultra-lightweight (Size M = 2.9 lbs./1.3 kg). High-pressure molding system improves shell strength. High-impact custom bead absorbing liner is multi-piece/multi-density for low- and high-velocity impact protection. Integrated channels for optional drinking tube and radio microphone systems. Black Comfort-Plus FR¬ interior fabric for excellent moisture wicking. Exceptional fit with multi-density foam interior. Best-in-class ventilation system includes direct-flow chin vents and manual level air intakes. Hollow synthetic rubber gasket seal keeps out water, dust, and dirt. Large eye port for eyeglass wearers. Includes clear SRV-8 3mm SRV shield (SRV-1 pivot system). Tinted shields also available . M6 terminal hardware and hex wrench for Head and Neck Restraint anchors. Available only in carbon fiber finish. This helmet will ship to you with signature required for delivery.
Bell KC7 CMR Lewis Hamilton Edition Karting Helmet
Bell Bell KC7 CMR Lewis Hamilton Edition Karting Helmet $999.95
Bell Racing Helmets KC7-CMR "Lewis Hamilton" Karting Helmet F1 World Champion Lewis Hamilton designs special edition Bell karting helmet Bell Racing Helmets teamed up with F1 Multiple World Champion Lewis Hamilton to develop a special edition Lewis Hamilton KC7 CMR Karting helmet for the 2019 racing season. Lewis Hamilton worked personally with Bell in-house custom paint team to create a custom graphic for the KC7 CMR with the signature elements and colors of his F1 design. This special edition KC7 CMR features a multi-layer red SE07 2mm visor, clear top and side air intakes, clear rear spoiler and HP helmet bag. The KC7-CMR, an ultra-lightweight youth karting helmet, incorporates the same technology, aerospace materials and construction methods used to build the advanced Bell HP7 helmet used by Lewis Hamilton in F1 competition. The KC7-CMR's sleek, aerodynamic design features an advanced ventilation system that can be used with or without air intakes to maximize cooling and a double screen anti-fog (DSAF) visor to eliminate fogging. Homologated to the Snell/FIA CMR standard and certified for global competition, the KC7-CMR is designed to minimize weight for karting drivers under the age of 18. The Bell KC7-CMR is the perfect helmet for the next generation of champions as they start their racing career in karting. SPECIFICATIONS: Ultra lightweight helmet featuring a carbon/fiberglass shell: 2.6 lbs. in sizes 54 - 56cm and 2.7 lbs. in sizes 57 - 59cm (+/- 3%). Advanced multi-density, multi piece liner to maximize energy absorption and impact performance. Cutting-edge style based on the Bell HP7 used in F1. Graphic design created by Lewis Hamilton reflecting his F1 helmet livery. Powerful top and chin bar ventilation thanks to a total 14 air intake and extraction channels. Optimized shield design resulting in improved aerodynamic behavior and energy absorbing capacities. Multilayer red SE07 2mm visor. Clear top and side air intakes mounted on the helmet. Clear spoiler mounted on the helmet. Non-fireproof lining for extra durability. Snell-FIA CMR-2016 approved. Sizes: 54 to 59 cm. Snell-FIA CMR-2016 approved.
Bell RS7 Pro Helmet SA2020
Bell Bell RS7 Pro Helmet SA2020 from $899.95
Bell Racing Helmets RS7 Pro SA2020 Helmet Based on the HP7 design and featuring a lightweight carbon composite shell using Bell high-pressure proprietary molding system, the RS7 uses and innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capabilities. The sleek, modern design features an advanced ventilation system with 14 air-intake and extraction channels that can be used with or without air-intake covers (available separately). The RS7 double screen anti-fog (DSAF) visor and rubber gasket seal ensured air, water and dust will not enter the eyeport CERTIFICATIONS: Snell SA2020 FIA 8859-2015 FEATURES: Lightweight carbon composite shell. Advanced multi-density, multi piece liner to maximize energy absorption and impact performance. Optical grade injection molded Double Screen Anti-Fog (DSAF) visor. Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels. Shell and shield design optimized to improve aerodynamic performance. Integrated channels in face piece offer multiple options to install drink tube and radio systems. Air intake, side air extractors, rear spoiler, top and chin bar gurneys available separately. Top air attachments available separately for use with external cooling systems. Factory installed HANS posts. Synthetic rubber gasket seal to prevent dirt and water entering the helmet. Shield and pivot kit: SE07, SV(SE07). Solid colors: White or Matte Black. Graphics colors: Stamina Grey or Stamina Red. Sizes: 6 3/4 (54) to 7 5/8+ (61+). All sizes shown in centimers. IN THE BOX: Bell RS7 Pro SA2020 Clear SE07 DSAF shield Draw string helmet bag HANS post anchors installed This helmet will ship to your with signature required for delivery.
Bell KC7 CMR Champion Karting Helmet
Bell Bell KC7 CMR Champion Karting Helmet $799.95
Bell Racing Helmets KC7-CMR Champion Karting Helmet The Bell KC7-CMR is a karting specific helmet based on the same design as the top of the range HP7 carbon helmet, as used by some F1 drivers. Constructed using an ultra lightweight Carbon/Kevlar/Glass hand laminated shell with a 2mm double screen anti fog visor for perfect visibility in all conditions. Ultra lightweight and strong carbon/kevlar/fibreglass composite shell Striking Champion pink graphic design is sure to get you noticed Anti fog visor provides excellent visibility 14 air intakes and extraction channels provide optimum airflow through the helmet A range of spoilers and air intakes are available separately The shell of the KC7-CMR is designed to provide the optimum visor location which improves aerodynamics and reduces noise. The powerful top and chin bar ventilation keeps the drivers head cool thanks to a total of no less than 14 air intakes and extraction channels. A range of accessories including different visor options, spoilers and air intakes are available separately. Helmet weights - Sizes 54-56cm - 1185g ( /-3%) Sizes 57-59cm - 1230g ( /-3%) Snell-FIA CMR-2016 approved
Bell GT6 Pro Helmet SA2020
Bell Bell GT6 Pro Helmet SA2020 $799.95
Bell GT6 Pro Helmet SA2020 The GT6 Pro features the same modern and aggressive design as HP6, developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an lightweight Premium carbon glass shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. It can be fitted with optional earcups providing optimal noise insulation, with fully integrated radio communication kit and hydration systems (available separately or in GT6 RD Titanium version). FEATURES Lightweight Premium Carbon Fiberglass Composite shell Wide eyeport opening for optimal vision in closed cockpit cars Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Integrated channels in face piece offering multiple options to install drinking tube, valves, and radio systems Extraction vents to maximize cooling and air circulation Factory installed Hans anchors as original equipment Optional top forced air intake can be installed on the left or right top side vents - available for use with and external cooling system Optional earcups for increased noise insulation Interior: Dark Grey High Strength High Comfort FR Fabric Color: Gloss White or Matte Black Homologation: FIA8859-2015 & Snell SA2020 Sizes: 6 3/4 (54) to 7 5/8+ (61+) IN THE BOX GT6 Pro Helmet Clear SE06 3mm DSAF Shield Installed Drawstring Helmet Bag Plastic Tearoff Posts Installed Hex Wrench Key