Sold out
OMP Hub Porsche 997
OMP Hub Porsche 997 $89.00
OMP Steering Wheel Hub Adapter (Porsche) OMP Steering Wheel Hub Adapter fits the following vehicles: Porsche 997 Audi A3 Audi A4 Audi A6 Audi A8 VW Beetle VW Golf VW Jetta This OMP Steering Wheel Hub Adapter is used to attach an OMP, MOMO, or Sparco steering wheel to your car's factory steering column.
NRG Short BMW E30 Steering Wheel Hub
NRG Short BMW E30 Steering Wheel Hub $148.00
NRG Innovation Steering Wheel Short Adapter Fits BMW E30 M-cars (and more) The NRG Short Adapter is the among our best sellers. These units were designed specially so that an aftermarket steering wheel installed with the quick release kit still mounts in the same location, not too close to the driver. Made from the highest quality aluminum.
Sold out
NRG Quick Release Kit - Gen 2.5
NRG Quick Release Kit - Gen 2.5 $145.00
NRG Quick Release Kit Gen 2.5 This NRG Quick Release is designed specifically for use with racing gloves. The NRG Gen 2.5 takes everything you loved from the Gen 2 and improved upon it.
NRG Steering Wheel Hub (2012-14 Honda Civic, 2008-12 Accord)
NRG Steering Wheel Hub (2012-14 Honda Civic, 2008-12 Accord) $148.00
NRG Steering Wheel Hub (Honda Civic & Accord) Honda Challenge racers using the 2008-2012 Accord or 2012-2014 Civic chassis, this is the steering wheel hub adapter you want! Smaller that the competition, so no trimming of the dash panels or gauge cluster is required like other steering wheel adapters. The NRG Innovation Steering Wheel Adapter for the Honda Accord and Civic is our number one seller.
Sold out
OMP Steering Hub BMW E30
OMP Steering Hub BMW E30 $90.95
OMP Steering Wheel Hub Adapter BMW E30 The OMP Steering Wheel Hub Adapter For BMW E30 allows you to install an OMP, MOMO, or Sparco steering wheel onto your car's factory steering column. Special Note: Airbag equipped models require a washer for proper fitment. This washer can be found at any local hardware store.
Sold out
Red Line Heavy Shockproof Gear Oil
Red Line Heavy Shockproof Gear Oil $25.99
Red Line Shockproof Heavy Gear Oil Red Line Heavy ShockProof Gear Oil was designed for heavily-loaded racing differentials and transmissions, as well as problem gearboxes. Red Line Heavy ShockProof Gear Oil has a film thickness greater than an SAE 75W250, yet low fluid friction like 75W90. Many performance racing applications like Sprint, Midget, Dirt Late Model and Quick-Change differentials, Detroit Lockers and spools, NHRA Top Fuel and Funny Car rear ends. Not recommended for most synchro applications due to the product's extreme slipperiness.
Sold out
Lifeline 1/8 BSP Outlet 8mm
Lifeline 1/8 BSP Outlet 8mm $15.29
Lifeline 1/8 BSP Outlet 8mm   Replacement straight outlet for fire suppression bottles with 8mm decabon. 
Sold out
Lifeline Decal Pack
Lifeline Decal Pack $6.99
Lifeline Decal Pack   Lifeline replacement decal pack. Includes a large and small decal for fire suppression marking, as well as electrical cut off. 
Sold out
Lifeline 1/4bspt x 8mm 2 Way Outlet
Lifeline 1/4bspt x 8mm 2 Way Outlet $18.49
Lifeline 1/4bspt x 8mm 2 Way Outlet   Replacement t-style outlet for fire suppression bottles with 8mm decabon. 
Sold out
Lifeline Equal T Connector 8mm
Lifeline Equal T Connector 8mm $28.49
Lifeline Equal T Connector 8mm   Fire Suppression System, Equal T Connector Type Zero 360 & Zero ZERO (8mm). 
Sold out
Lifeline Electrical Cockpit Switch w/ Plastic Bezel
Lifeline Electrical Cockpit Switch w/ Plastic Bezel $20.99
Lifeline Electrical Cockpit Switch w/ Plastic Bezel   This LifeLine electrical cockpit switch is a replacement for your old or damaged switch. Suitable for use with all Lifeline electrical systems. 
Sold out
NRG Mustang/Focus/Fiesta Steering Wheel Hub
NRG Mustang/Focus/Fiesta Steering Wheel Hub $135.99
NRG Mustang Steering Wheel Hub Ford Mustang, Focus, Fiesta, Mazda 2 and 3 Racers - this is the steering wheel hub adapter you want. Smaller than the competition, so no trimming of the dash panels or gauge cluster is required. NRG Innovation Steering Wheel Adapter for your 2005-2015 Mustang is the number one best seller. This hub is designed utilizing one piece solid construction for the maximum in durability. This hub has a HEX female hole. NRG Inovations has machined a piece of aluminum that is worthy of the highest level race or show cars. It does not just look the part, but is ready for years of track abuse. Precision machines, awesome finish, and ready for easy install in your prized 2005-2015 Mustang, 2000-2014 FOcus, 2011-2014 Fiesta. Bonus, it also fits Mazda 2 (2011-2014) and Mazda 3 (2004-2014) NRG Innovation has developed another complement to their quick release steering kits. These units were designed specially so that an aftermarket steering wheel installed with the quick release kit still mounts in the same location, not too close to the driver. Made from the highest quality aluminum. NRG's Short Hubs are made to work with NRG quick releases.  NRG Mustang/Focus/Fiesta Steering Wheel Hub is Compatible With:  2005-2015 Ford Mustang 2000-2014 Ford Focus 2011-2014 Ford Fiesta 2011-2014 Mazda 2 2004-2014 Mazda 3 NRG Mustang/Focus/Fiesta Steering Wheel Hub Details: Manufacturer: NRG Innovations Manufacturer part number: SRK-175H
Sold out
Sparco-ADV-XT-Racing-Seat-8855-2021-PROFILE-IMAGE
Sparco ADV XT Racing Seat | FIA 8855-2021 from $2,100.00
Sparco ADV XT 8855-2021 Racing Seat Special Order (8-10 weeks) & Non-Refundable Elevate Your Racing Performance with the Sparco ADV XT 8855-2021 Racing Seat. Now you can enjoy your new race seat for up to 10 years. (Requires Sparco Side Mount 004932 in order to qualify for the 10 year FIA certification. You can select this side mount when ordering your seat.) ELEVATE YOUR RACING PERFORMANCE Introducing the Sparco ADV XT 8855-2021 Racing Seat, the pinnacle of racing comfort and safety. Designed to meet the rigorous standards of the FIA 8855-2021 certification, this seat combines cutting-edge technology with exceptional craftsmanship to deliver an unparalleled racing experience.Safety is paramount in motorsport, and the Sparco ADV XT Racing Seat is engineered to provide uncompromising protection. Constructed with a sturdy tubular frame and utilizing high-quality materials, this seat ensures exceptional durability and resilience. It has been rigorously tested to meet the stringent FIA 8855-2021 safety standards, providing you with the confidence to push your limits on the track.But the Sparco ADV XT Racing Seat doesn't stop at safety. It also delivers exceptional comfort, keeping you focused and comfortable during those intense racing sessions. The ergonomic design conforms to your body, providing optimal support and reducing driver fatigue. With its plush padding and premium upholstery, this seat enhances your overall comfort, enabling you to maintain peak performance throughout every race.Experience precision control like never before with the Sparco ADV XT Racing Seat. Its advanced design features integrated side and backrest bolsters that can be easily adjusted to your preferences. This customizable fit ensures optimal stability, allowing you to make precise maneuvers with ease, giving you the competitive edge you need to outperform your rivals.Visually striking and flawlessly crafted, the Sparco ADV XT 8855-2021 Racing Seat is a true embodiment of style and functionality. Its sleek and aerodynamic design, complemented by intricate stitching and attention to detail, will make a statement in any race car interior.When it comes to performance, safety, and comfort, the Sparco ADV XT 8855-2021 Racing Seat exceeds expectations. Its 10-year 8855-2021 certification highlights its exceptional quality and long-lasting durability, ensuring it will be your trusted companion for countless racing adventures.Take your racing experience to the next level with the Sparco ADV XT 8855-2021 Racing Seat. Unlock unparalleled safety, comfort, and performance on the track. Don't settle for anything less than the best—choose Sparco and dominate the competition. WHAT IS 8855-2021 CERTIFICATION? The FIA 8855-2021 certification is a safety standard established by the Fédération Internationale de l'Automobile (FIA), the governing body for motorsport. It specifically pertains to racing seats and sets forth a set of stringent criteria that must be met to ensure the highest level of safety for drivers.The certification encompasses a range of requirements related to the design, construction, and performance of racing seats. These requirements include: Impact Resistance: Racing seats must be able to withstand high-impact forces and provide effective protection to the driver in the event of a crash. They undergo rigorous testing to ensure they can withstand these forces without compromising driver safety. Load-Bearing Capacity: Racing seats are subjected to tests to determine their load-bearing capacity. This ensures that they can support the weight of the driver and maintain their structural integrity under intense racing conditions.Flame Resistance: Racing seats must be constructed from materials that are resistant to fire. This is crucial in motorsport, as a fire incident can occur in the event of a crash. The FIA 8855-2021 certification requires seats to meet specific flame resistance standards to enhance driver safety. Durability: Racing seats undergo tests to evaluate their durability over an extended period of time. This ensures that they can withstand the demands of racing, including vibrations, impacts, and repeated use, without compromising their structural integrity.It is important for racers to choose seats that are certified under the FIA 8855-2021 standard, as it ensures they are investing in a product that meets the highest safety standards set by the governing body of motorsport. By selecting FIA-certified seats, drivers can have confidence in the safety and performance of their racing equipment, allowing them to focus on pushing their limits on the track. The 10-year 8855-2021 certification is a remarkable achievement that sets the Sparco Master Racing Seat apart from its competitors. This certification signifies that the seat meets the rigorous safety standards established by the Fédération Internationale de l'Automobile (FIA), the governing body for motorsport safety.The FIA 8855-2021 standard is specifically designed to ensure the highest level of safety for racing seats. It encompasses a comprehensive set of criteria that must be met, including impact resistance, load-bearing capacity, flame resistance, and durability. Undergoing rigorous testing and evaluation, the Sparco Master Racing Seat has proven its ability to withstand extreme conditions and provide optimal protection to the driver.The 10-year certification is a testament to the seat's exceptional build quality and longevity. It means that the Sparco ADV XT Racing Seat is built to last, with materials and construction techniques that are designed to withstand the demands of competitive racing over an extended period of time. This certification provides peace of mind to racers, knowing that their investment in the Sparco ADV XT Racing Seat will serve them well for many years to come.Moreover, the 10-year certification demonstrates Sparco's commitment to excellence and their dedication to ensuring the highest level of safety in motorsports. Sparco, renowned for their expertise in producing high-performance racing equipment, has consistently pushed the boundaries of innovation to deliver products that meet and exceed industry standards.Choosing a racing seat with a 10-year 8855-2021 certification means you're making a wise investment in your safety and long-term racing endeavors. It's a clear indication that the Sparco ADV XT Racing Seat has undergone rigorous testing, proven its exceptional quality, and is recognized by the FIA as a product that meets the highest safety standards. SPARCO ADV XT RACING SEAT DIMENSIONS
Sparco-Pro-Master-8855-2021-Racing-Seat-PROFILE-IMAGE
Sparco Pro Master 8855-2021 Racing Seat from $2,200.00
Sparco Master 8855-2021 Racing Seat Special Order Item: Estimated lead time 8-10 weeks. Non-cancelable and non-returnable. The Sparco Master 8855-2021 Racing Seat represents the next generation of FIA-approved racing seat technology, combining advanced safety, exceptional comfort, and long-term durability in a professional-grade competition seat. Engineered to meet the latest FIA 8855-2021 homologation standard, the Master is designed for serious racers who demand the highest levels of driver protection and performance. Featuring an ergonomic shell design, adjustable support cushions, and advanced impact-management technology, the Sparco Master delivers outstanding comfort during long race sessions while maintaining the support and containment required for professional motorsport competition. One of the most significant advantages of the Master is its FIA 8855-2021 homologation, which allows for a 10-year service life when installed with the approved Sparco side mounting brackets. This extended homologation period can significantly reduce long-term ownership costs while ensuring compliance with current racing regulations. *Requires Sparco Side Mount Bracket 004919 to qualify for FIA's full 10-year homologation period. Built to the Latest FIA 8855-2021 Standard The FIA 8855-2021 standard is the newest generation of FIA seat homologation, introducing enhanced testing requirements for strength, impact protection, energy absorption, and durability. Compared to previous standards, FIA 8855-2021 seats are engineered to provide improved protection in severe racing incidents while offering a longer homologation period. The Sparco Master was developed to meet these stringent requirements, making it an excellent choice for road racing, endurance racing, GT competition, club racing, and professional motorsport applications. Sparco Master 8855-2021 Features FIA 8855-2021 homologated racing seat Eligible for 10-year FIA homologation period when used with approved Sparco side mounts Professional-grade fiberglass composite shell construction Advanced impact-energy management design Integrated head and shoulder containment system Adjustable side and backrest support cushions Optimized ergonomics for reduced driver fatigue Breathable fire-retardant upholstery materials Excellent lateral support and driver containment Designed for modern professional motorsport applications Why FIA 8855-2021 Matters FIA 8855-2021 is the latest global standard for racing seat safety and durability. Seats certified to this standard undergo extensive testing to evaluate: Impact Resistance: Ability to withstand high-energy crash loads. Structural Strength: Enhanced shell rigidity and load-bearing capacity. Flame Resistance: Compliance with FIA fire-safety requirements. Durability: Long-term performance under racing conditions. Driver Protection: Improved occupant support during impact events. For racers competing under modern FIA regulations, FIA 8855-2021 homologation provides confidence that the seat meets the latest safety requirements recognized throughout international motorsport. Technical Specifications Homologation: FIA 8855-2021 Homologation Duration: Up to 10 years when installed with approved Sparco side mounts Seat Type: Competition Racing Seat Shell Construction: Fiberglass Composite Mounting Type: Side Mount Harness Compatibility: Multi-Point Racing Harnesses HANS Compatible: Yes Upholstery: Fire-Retardant Fabric Why Choose the Sparco Master 8855-2021? The Sparco Master delivers everything serious racers demand: FIA's latest safety certification, exceptional comfort, professional-grade containment, and an extended 10-year homologation period. Whether you're competing in endurance racing, club racing, GT competition, or professional motorsport, the Master provides the protection, durability, and confidence needed to perform at your best. For drivers looking to maximize both safety and long-term value, the Sparco Master stands among the most advanced FIA 8855-2021 racing seats available. Sparco Master 8855-2021 Dimensions ```
Sparco 008012XNR Water proof QRT-R Race Seat for UTV and Off road
Sparco QRT-R X Off-Road UTV Racing Seat (Waterproof) $1,029.00
< Sparco QRT-R Racing Seat Water-Proof Off-Road UTV The Sparco QRT-R XNR seat is the perfect choice for all UTV and OFF-Road applications were you need a strong and light racing seat that is also water-proof to keep you dry and driving all day at peak speed.  The Sparco QRT-R is the first seat to feature Sparco’s patented QRT ultra-light technology. This QRT Technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT Technology gives weight savings of 7 lbs to 10 lbs per shell. The main benefit is that QRT-R seat approaches the weight of a carbon fiber seat at a price of a fiberglass seat. The Sparco QRT-R is the lightest "Medium/Large" size fiberglass seat, the shell alone weighs only 9.9 lbs (or 15 lbs fully trimmed). The Sparco QRT-R has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller vehicles. The Sparco QRT-R is FIA approved. Available in cloth. REQUIRES QRT SIDE MOUNT #600QRT FOR PROPER MOUNTING Sparco QRT-R Racing Seat Technology Lightest "Medium/Large" size fiberglass seat on the market Lower seating position that can fit taller/larger drivers Smaller outer dimensions for small vehicle fitment QRT Technology gives an average weight savings of 7lbs per shell FIA approved Sparco QRT-R Racing Seat Dimensions
AP Racing by Essex Endurance Front Brake Kit (325mm) for Subaru BRZ/Scion FR-S/Toyota GT86/GR86 (2013+)
AP Racing by Essex Endurance Front Brake Kit (325mm) for Subaru BRZ/Scion FR-S/Toyota GT86/GR86 (2013+) $3,416.65
Complete Front AP Racing Competition Endurance Brake Kit Subaru BRZ, Scion FR-S, or Toyota GT86/GR86 (2013+) Clears Gen 2 (2022 and up) 17- and 18-inch wheels without need for a spacer Features AP Racing CP8350 four-piston calipers 325mm x32 mm, 70 vane AP Racing two-piece floating rotors Saves approximately 10 lbs. of unsprung weight from nose vs. OEM brakes Every component is designed to resist the heat of extended racing stints Pistons are sized to allow for seamless integration with OEM master cylinder and ABS system Designed to work with OEM rear brakes Brake Pads That Fit These Calipers: Carbotech CTW7420 Ferodo FRP3097 D50 PFC 7751.xx.20